Development of Surface Car parking at Boulevard including Construction of Toilet Blocks at Boulevard and at SSCL Car Parking Residency Road.

Amount

Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. 2.7.1 All kinds of soil

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications including all carraiges and directions of Engineer-in-Charge. 16.82.1 With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30

Providing and laying in position cement concrete of specified grade including curing but including the cost of centring and shuttering including all carraiges including scaffolding All work upto plinth level with: 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size)

Providing and laying in position cement concrete of specified grade including curing but including the cost of centring and shuttering including all carraiges All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto five level including curing but including the cost of centring, shuttering, finishing including all carraiges. 5.3.1 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size)

CONCRETE PAVEMENTS Cement concrete 1:1½:3 (1 cement :1½ coarse sand: 3 graded stone aggregate 20 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation, finishing and tamping including the cost of centring and shuttering including all carraiges complete job

Providing and fixing strips in joints of terrazzo/ cement concrete floors. Glass strips 40 mm wide and 4 mm thick

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar 1: 6 (1 cement : 6 coarse sand) upto plinth level including scaffolding including all carraiges curing. complete job One face dressed Fine chisel dressed

Providing and laying chisel dressed Devri Stone of size 300x200 mm face with 150 mm depth in cement mortar in sqaure, rectangular, circular, arch. One face dressed Fine chisel dressed

Stone work, plain in copings, cornices, string courses and plinth courses, upto 75mm thick, in cement mortar 1:6 (1 cement : 6 Coarse sand) including pointing with white cement mortar 1:2 (1 cement : 2 Stone dust) with an admixture of pigment matching the stone shade& curing including the cost of centring and shuttering including all carraiges

Raised pointing on Red sand stone masonry surface/brick masonary with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours including carraige and scaffolding)

Cement concrete flooring 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry and curing complete, but excluding the cost of nosing of steps etc. including carraiges Complete. 50 mm thick with 20mm nominal size stone aggregate.

15mm Cement plaster on the rough side of single or half brick wall of mix including all carriages. 13.2.1 1 : 4 ( 1 cement : 4 fine sand

Painting road surface marking with adequate no. of coats to give uniform finish with read mixed road marking paint conforming to IS: 164, on cement concrete Road in white/yellow shade including cleaning the surface of all dirt, scales, oil, grease and foreign material etc. complete

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level including the cost of centring and shuttering including all carraiges. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size

Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth and super structure including curing in : Cement mortar 1:6 ( 1 cement : 6 coarse sand) including carraige including the cost of scaffolding and all carraiges.

Half brick masonry with common burnt clay (non-modular) bricks of class designation 7.5 in foundations and plinth including curing in : 6.15.1 Cement mortar 1:3 ( 1 cement : 3 coarse sand)

Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete 2 mm thick

Providing and laying of Precast R.C.C. grating with frame 500x450 mm horizontal grating each

Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer’s specifications including appropriate priming coat, preparation of surface, etc complet

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level including carraige 5.22A.6 Thermo-Mechanically Treated bars of grade Fe-500D or more

Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In stringers, treads, landings etc. of stair cases, including use of chequered plate wherever required, all complete.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works

Supplying at site Angle iron post & strut of required size including bottom to be split and bent at right angle in opposite direction for 10 cm length and drilling holes upto 10 mm dia. etc. complete.

Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in?charge. 16.25.1 Made of G.I. wire of dia 4 mm 16.25.2 Made of G.I. wire of dia. 4 mm, PVC coated to achieve

Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension, as below (tolerance+/-1mm with wall thickness 2.0mm +/-0.2mm, corners of the door frame to be joined with galvanized brackets and stainless steel screws, joint mitred and plastic welded. The hinges side vertical of the frames reinforced by galvanized MS tube of size 19x19mm and 1mm +/-0.1mm wall thickness and three numbers stainless steel hinges fixed to the frame complete as per manufacturers’ specifications and direction of engineer-in-charge) 9.119.1 Extruded section profile size 48x40mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete. 100x10 mm

Providing and fixing bright finished brass handles with screws etc. complete : 9.82.2 100 mm

Providing and laying Ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming to IS: 15622 of approved make, laid on 20 mm thick bed of cement mortar 1: 4 ( 1 cement : 4 coarse sand) including pointing the joints with white cement and matching pigment etc., complete. 11.50.2 In all colours, shades, except White, Ivory, Fume Red Brown

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete

Providing and fixing 18mm granite , mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels

Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. 8.3.2 Granite Work

Providing & fixing White vitreous china water closet squatting pan(Indian type) along with “S” or “P” trap including dismantling of old WC seat and “S” or “P” trap at site complete with all operations including all necessary materials, labour and disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge. 14.79.1 Long pattern W.C Pan of size 580x440 mm

Providing and fixing wash basin with C.I bracket ,50mm CP brass pillar tapes 32mm CP waist of Standard paterm including painting of fitting and brackets cutting and making Good the Walls

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the wall sand floors wherever required

Providing and laying water proofing treatment on roofs of slabs by applying cement slurry mixed with water proofing cement compound consisting of applying : (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound@ 0.253 kg/sqm. (b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/sqm mixed with water proofing cement compound @ 0.670 kg./sqm. and coarse sand @1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately) For the purpose of measurement the entire treated surface will be measured.

Providing and fixing C.P. brass sanitary installations including necessary fittings all complete of approved make fittings and fixtures. i. Sink mixer/Basin mixer ISI marked Parko make

Wall Mixer ISI marked make Parko/Jaguar make.

Providing and fixing water closet squatting pan (European type W.C. Pan) with 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) of approved make with all fittings and complete including cutting, making good the wall and floors wherever requires:White Vitreous China Orrisa pattern W.C. pan of size 580x440mm with foot rests Hindustan make.

P/F of sanitary Fixtures and fittings: i. Angle valve Parko Make (20 No.) ii. C.P. Long Bend (02 No.) iii. C.P soap case (02 No.) iv. C.P towel rod (02 No.) v. PVC waste pipe (08 No.) vi. C.P gratings (07 No.) vii. PVC connection (19 No.) viii. Mirror with wooden frame (04 No.) ix. CP nipple with CP cup (22 No.) x. CP shower ( Nil.) xi. Floor trap PVC (06 No.) xii.Bib cock Parko make (02 No.) xiii. 15mm dia. pipe (145 No.) xiv. CP Ring (01 No.) xv. Glass shelf (01 No.)

Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.: 15 mm dia. nominal bore

20 mm dia. nominal bore

Providing and fixing of Sanitary fixture and fittings: PVC Pipe 100mm dia

PVC Pipe 75mm dia

100mm PVC Door TEE (Type B)

75mm PVC Door TEE (Type B)

P/F in position PVC water storage tanks tripple layer of standard mark sintex/star and manufacture including cost of all allied fittings like tank nipple etc. and placing in position complete.

Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete.

Providing and applying Plaster of Paris putty of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (new work) 15mm dia

20 mm nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complet 15 mm nominal bore

20 mm nominal bore

100mm dia. PVC tee

100mm dia. Plain Bend

75mm dia. PVC tee

75mm dia. Plain Bend

Supply,Laying,Testing and Commissioning of 1.5 Sqmm PVC FRLS Wire Copper Conductor for lighting and other load with suitable G.I Boxes - Havells or equivalent

Supply and Fixing of 25mm Dia Heavyduty PVC Conduit for laying wires including all bends, J Boxes, Joints etc

Supply, Installation, Testing and Commissioning of Pillar Globe Lights including 15 watt. bulb complete in all respects.

Supply, Installation, Testing and Commissioning of Ornamental Pillar Lights for 4 Pillars (Entry and Exit Gates) including 15 watt. bulb complete in all respects.

Supply and Laying of 42 mm HDPE Pipe

Installation, Fixing of Heating points receptacles etc

Supply,Installation,Testing and Commissioning of 15KVA 3-Phase Servo Voltage Stablizer Automatic, Air Cooled with Digital Indicator having 99.99% Pure Copper Winding with Unbalanced type Input and Balanced Type output,Time delay adjustable from 5 seconds to 120 seconds, protection against phase loss, against Neutral break, against Low Voltage, protection of control circuits against extra high voltage (Input: 156-430 Volts Line Voltage with efficiency 99% and Output: 400V +/-1% Line Voltage) of Microtek, V-Guard, Servomate or equivalent reputed company make with all necessary connection leads (Complete Job)

Supply , Installation and Commissioning of 12W LED downlights - Havells or equivalent

Supply,Installation,Testing and Commissioning of Step light in red/green/blue colours (to be decided by Engineer Incharge) with 3inchx36inch Aluminium flat panel with 2 watt 8 no lamps in each panel (Total 32 Lamps for 4 Panels)

Supply, Installation, Testing and Commissioning of Exhaust fan

Supply and fixing of 5A Modular switch with modular plate of Havells, Legrand make or equivalent.

Supply,Installation,Testing and Commissioning of 3.5 Core 50 Sqmm 11 KV Grade Service Line Aluminium Conductor,PVC Insulated Armoured Cable as required (Complete Job)

Supply, Installation,Testing and Commissioning of 4 core 10 sqmm PVC Insulated Armoured cable

Supply,Installation,Testing and Commissioning of 4 Sqmm 3 runs (2x4+1x4) PVC FRLS Wire Copper Conductor

Supply,Installation,Testing and Commissioning of 6-32 A MCB suitable for lighting for each pillar

Supply and Fixing of 8 inchx8 inch Iron boxes with connectors for each pillar made of 2mm CRCA sheet enclosure , to be fixed/recessed on wall surface.

Supply,Installation and Fixing of SPN 12 way Distribution Box on Surface

Supply, Installation and Commissioning of LED Indicator

Supply,Installation,Testing and Commissioning of 5 A 3 pin socket

Supply, Installation,Testing and Commissioning of 40 A DP

Supply,Installation,Testing and Commissioning of High Mast light comprising High Mast Shaft in 2 segments 13.5 mtr, bottom dia 360mm/top dia-100mm, no of sections- 2, Section length 65mm 6500mm each section thickness. 1) 3mm base plate-520x16 mm 1 No, 2) Head frame (2/3) wire system 1 No, 3) Double carriage winch 1 No, 4) Double drum winch 1 No, 5) In winch power tool 3-phase 0.75 HP 06 pole single speed 1 No, 6) Chain/sprocket 1 No, 7) Winch mounting plate 1 No, 8) Resting arm 1 No, 9) Lighting final 1 No, 10) Integral dropcable 5 core-2.5 sqmm 1 No, 11) Wire rope 6 mm-2/3 wire system 1 No, 12) Cast Alimunium junction box at lantern carriage 1 No, 13) plug and socket 1 No, 14) Necessary fastners 1 No, 15) Foundation bolts M24X1100 (51Mass) 1 No, 16) Anchor plate plus template 1 No, 17) Aviation obstruction light (single dome) LED, 18) FR PVC 2.5Sqmm wire for wiring of fixtures and FP , 19)Supplying and fixing of floodlights for High Mast comprising of SIIC of resatile pressure dia cast Al. IP 6 250Watt LED 8 No IS 2026, 20) line filter protection, 21) Mounting-base stand, 22) Power components- 3 Nos motorised copper wound

Supply,Installation,Testing and Commissioning of Floor mounted low voltage Indoor Panel IP 42 suitable for operation on 433Volts 3 Phase, 50 HZ supply, made of 2mm CRCA sheet enclosure with Almumunium Busbar 4 wire with following Switchgears and metering. Necessary arrangements be made for termination of incoming cable and outgoing cables. IT Panel shall be manufactured as per IS 8623. All accessories such as shunt coils, UV release, contact blocks, locks and keys as required by the scheme shall be included in the panel. Contractor to get the GA drawings approved before execution. Incomer: 250 A 4 Pole MCCB 36 KA- 1 No with thermal magnetic release overload and short circuit adjustable. 200 A changeover-1 No ,Phase Indication LED Lamps shall be provided on each incomer Busbar; DP 63A - 4NO, 32A TPN - 12 NO, 250A 4 Wire Aluminium Busbar supported on DMC Insulators.

Boom barrier with anti-crash and adjustable arm retractable upto 4m from 6m including inverter backup system

Supply Installation Testing and commissioning of G.I Chemical Earthing of 50 mm dia of 2 meter long including proper drilling and refilling back with chemical as required

M/s Showkat Ahmad Gilkar

M/S MIR MONIS

M/S BHAT CONSTRUCTIONS

SH. JAVAID AHMAD BHAT

SHAWL INFRASTRUCTURES

M/S NAZIM ASSOCIATES

M/S PYRAMID INFRATECH

DAR CONSTRUCTIONS AND CO