15th Finance Commission Tied Grant 2nd Installment 2025 26 Repair and Maintenance of Sanitary complex of Ward No 09 Avinasillingapuram colony in Kanjikovil Town Panchayat

Amount

Earthwork Excavation for foundation in all types of soils and sub soils including soft disintegrated rock and soft rock to the full depth including all leads and lifts etc., complete complying with the standard specification, drawing and as directed by the departmental Engineers.

Dismantling of Damaged Plain Cement Concrete including cost of all materials to site and all labour charges etc., complete as per standard specification

Dismantling Floor finish and dadooing walls in cement mortar with Mosaic Tiles / Glazed Tiles / Clay Tiles / Cuddapah Slabs

Dismantling door and Windows including removal of frames, hings and fasteinng including cost and Conveyance of all materials to site and all labour charges for filling etc., Complete.

Cement concrete of mix 1:4:8 (one cement – Four sand – Eight broken stone) using Hard broken granite stone jelly of 40 mm gauge for foundation leveling course, standard specifications and drawings and has directed by departmental Engineers. Including cost and conveyance of all materials to working site, laying concrete and curing etc.

Plastering with cement mortal 1:5 mix using 12 mm thick including cost and conveyance of all materials to site and all labour charges etc., complete as per stand specifications as per TNDSS NO: 61 V,VI (S4)

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm finished thickness with c.m 1:3-20mm Tk and polished with same color cement including all cost and convene of all materials etc.,complete

Providing UPVC (Un-Plasticized Polyvinyl Chloride) Door: Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections. Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals. Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug.(SOR Item no.264,P.No.65)

Supplying and fixing in position of 23" size white Orissa pan Indian Water closet of approved quality with S or P trap including fixing the same in position etc., completed.

Supplying and fixing in position of size Western type Water closet(10lit Capacity) of approved quality with S or P trap including fixing the same in position etc., completed.

Wiring with 2X1.5sq.mm PVC insulated unsheathed Sc. Cu Conductor of 1100V grade in suitable PVC rigid pipe on wall and ceilling with PVC accessories with TW switch box with 5A F>T. switch inflush with wall, covered with hylum sheet of 3mm thick with painting of sutiable colour for open PVC light point ( SD 22)

Supply and fixing of WT bulk head fitting with guard (Philps / Bajaj / Crompton / K. Lite) suitable for 11W CFL lamp with CFL. (SD 83)

Supply and fixing of 20W - 4ft LED fitting with LED with TW round blocks on wall or ceiling with flu tube with PVC unsheathed Copper leads from terminals to the fitting.(PWD-:2025-26, Page No:213)

supply and fixing of 25W LED street light fitting with LED (Lower end) with 19mm dia. GI pipe (class B) with 1 no.19mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting . (SD 446)

Painting the new walls two coats over one coat of priming with best Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by the department officers etc., complete complying with standard specifications.

Painting two coats with best-approved quality Colour Enamel paint for New Iron Works including cost and conveyance of enamel paint etc., Complete.

MRP CONSTRUCTIONS (BID ID -1459975)