Providing and repairing power Pumps and Borewell Machineries of Water supply Maintenance in Old Bagalkote City

Providing and repairing power Pumps and Borewell Machineries of Water supply Maintenance in Old Bagalkote City

submersible pumpset rewinding up to 3HP.(Rates should be quoted incl.scarp wire retained with the tenderer)

submersible pumpset rewinding above 3HP to 5HP.(Rates should be quoted incl.scarp wire retained with the tenderer)

submersible pumpset rewinding above 5HP to 7.50.(Rates should be quoted incl.scarp wire retained with the tenderer)

submersible pumpset rewinding above 7.50 to 10HP.(Rates should be quoted incl.scarp wire retained with the tenderer)

Replacing of pump spare partrs. Pump bowls

Intermediate piece( IP) with IP leaded bronze bush

oil sel steel bush

impellor shell moulded with alluminium and bronze

Discharge out let(DO) bearing and DO steel bush

steel bush( DO steel bush)

pump shaft stainless teeel counter less ground with key up to 8 strage

pumpkey stainless steel up to 8 stage

NRV assembly complete with rubber rings

Labour charges over hauling only

Replacing motor parts.starter 3HP with one year guarantee

starter 4HP with one year guarantee

starter 5HP with one year guarantee.

carbon housing trust bearing block assembly compelte with segment bearing pad and tip carbon/freeadopadding pad a)carbon housing

Thrust bearing block assembly

Tip carbon/ferrode padding

studs and nut bolts

Bearing (gun metal) centrifugal cat alluminium bronze bering bush

motor base with pin

Transportation charges of pumping machinary from work spot to Garriage and viceversa.

Lifting of submersible pumpset with some mechanical arrangemnt .

Re-erection of submersible pumpset using some mechanical arrangement etc.

Labour charges of over hauling of motor

starter repalcement of parts of CH starter relay

32AMPS kit kat fuse

single phase preventer

starter overhauling charges

LT LK strter parts.kit set

LT/Lk auxularry

63AMps kit kat fuse

borewell clamp set

Nut botls 5/8inch

clamp wahers 3inch or 50mm

6inch borewell cap

50mm GI Nipple 6inch long

50mm GI nipple 9inch long

50mm GI 12inch nipple

50mm GI 18inch nipple

50mm dia 24inch nipple

2.50sqmm submesible cable.Vguard/Finolex make

4.00sqmm submesible cable.Vguard/Finolex make

50mmd ia GI collar Heavy duty

panel box of Size 3feet x2feet 6inch

Reparis to valve roads incl.cutting ,threading ,gas weldign etc.3inch valve rod

4inch valve rod

6inch valve rod

8inch valve rod

12inch valve rod

18inch valve rod

Turning of valve road and rethreading .3inch

4inch valve rod

6inch valve rod

8inch valve rod

12inch valve rod

18inch valve rod

providing welding to valve body with MS plate 3inch valve

preparation of new valve bronze chequenut 3incn

Reparis to existing valve cheque nut threding/rethreding 3inch

Rethreding to50mm dia GI pipe

Lifting of struckup subemrsible pumpset with pipe ,cable etc.

board wirig using 7/18copper wire

board wirig using 7/20 copper wire

32 amps MCB L & T make

50mm dia non return valve

Supply of penel box with all materilas

supply of 5hp pumpset

supply of 7.5hp pumpset