Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.7 LAccepted-AOC MCB Z 5 04939 GURU GOBIND NAGAR BATHINDA BATHINDA PUNJAB 151001 | BATHINDA | PUNJAB | 151001 | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹14.8 L+₹1.9 L (14.6%)Rejected-Finance 601 6TH FLOOR MANGOOR VALLEY NEAR GURUDWARA MANGOOR HILLL VASCO DA GAMA GOA 403 802 | SOUTH GOA | GOA | 403802 | L2 | Rejected-Finance NOT LOWEST | |
| 3 | L3₹15.0 L+₹2.1 L (16.0%)Rejected-Finance ASHAA BHAVAN RAMNAGAR NAKA FAIZABAD | AYODHYA | UTTAR PRADESH | 224001 | L3 | Rejected-Finance NOT LOWEST | |
| 4 | L4₹15.0 L+₹2.1 L (16.2%)Rejected-Finance | L4 | Rejected-Finance NOT LOWEST |
Tender Value
₹15 L
EMD Value
₹30,000
Closing Date
15 Dec 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Abohar
Garrison Engineer Abohar Pin 152116
Comprehensive B/R Maintanance of E/M Installations at Military Station Abohar
2022_MES_563633_1
GE ABH-51/22-23
Open Tender
Civil Works
Item Rate
180 days
Abohar Mil Stn
AS PER TENDER DOCUMENT
7 documents required · 7 mandatory
₹500
GE ABOHAR
₹30,000
Yes
31 Mar 2023
17 Nov 2022
17 Dec 2022
17 Nov 2022
15 Dec 2022
1 Dec 2022
Amount
Demolition of brick work built in cement mortar including all quoins, arches, pillars etc .
M&L for Brick work using fly ash bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified and directed by Engineer-in-Charge.
Lobour only for Brick work built in CM (1:6) with subclass 'B' bricks, straight or curved on plan exceeding 6m mean radius with Reusing the old bricks obtained from item above.
Taking down cement plaster on brick or concrete surfaces including raking out joints, hacking for keys, scrubbing down with water etc to receive new plaster .
M & L for rendering 15mm thik on fair faces of brick work in cement mortar 1:6 finished even & smooth without using extra cement.
M & L for rendering 15mm thick on fair faces of brick work in cement mortar 1:4 finished even & smooth without using extra cement.
M&L rendering 10 mm thick in cement mortar 1:3 on fair faces of concrete surfaces of ceiling finishing even and smooth without using extra cement.
Supply only integral waterproofing compound
M& L for two coat of Acrylic distemper on new plasterd wall surfaces of walls paint over 3mm thick wall care putty including necessary preparation of surfaces all as specified.
M&L for two coat of cement base paint over a coat of alkali resistant cement primer on newly plastered surface including preparation of undecorated surface complete all as specified and as directed
M&L preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling.
M&L for preparation of old distempered surfaces of walls by washing, rubbing down, stopping nail holes, fillings cracks with putty etc and applying one coat of Acrylic distemper on walls.
M & L applying one coat of cement base paint on old decorated plastered surfaces of walls including preparation of surfaces by washing, rubbing down and stopping of painted surfaces complete all as specified and directed by Engineer - in – Charge
M & L one coat of white wash on old decorated plastered or unplastered surfaces of ceiling including preparation of surfaces complete all as specified and directed by Engineer - in - Charge .
Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in & raming earth/ broken rubble mixed with earth around, in layers n. exc. 25cm, watering, & removing surplus soil to a distance n exc 50m & making good surface in soft/loose soil.
S&F in repair Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Fixing only Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings & straining & fixing to any type of standard rails straining bolts, including, securing or tying at crossings with & provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
Demolition of cement concrete reinforced in floors / pavings, (below or above ground level) and of any description and in any position not otherwise specifically provided for all as specified and directed by Engineer - in - Charge .
M&L for RCC Nominal Mix Type B1 1:2:4 (20mm graded aggregate) as in slabs supported on walls,beams and columns in floors,roofs,landings,balconies canopies ,deck slabs and shelves and like complete all as specified .
M & L mild steel TMT bars 10mm dia or over cut to length bent to shape required including cranking, hooking ends and binding with MS wire (annealed) not less than 0.90mm dia all as in column, beam etc .
M&L for Formwork to soffits of suspended slabs, such as roof slabs, floor slabs landing and similar work not exceeding 200mm thick (Horizontal & sloping) fair finished surfaces (Note- Steel props to be use).
Taking down chowkats or frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store all as specified.
Taking down chowkats with shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm)
S & F Factory made Plain framed, panelled shutter IInd class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated all as specified and directed by Eng-in-charge.
S&F Aluminium barrel tower bolt 200mm long stove enameled black
S&F Aluminium pressed handles oval type enameled black 150mm size
S&F Alu sliding door bolt 300 mm long plate type stove enameled black with bright bolt not less than12 mm dia.
S&F anodised aluminium frame for doors , window , ventilators with with one or more rebate including joiing cleat forfixing etc . complete all as specified.
S&F anodised aluminium window / ventilator shutter , side hung type without sash bar ,aluminium section wt 0.55 kg / mtr including necessary joining cleats , glazing clips, rubber packing , anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150 mm long (1 No.) hingestype B-21 100mm long (2 Nos. )suitable handle (1 No) complete all as specified .
S&F anodised aluminium door shutter , aluminium section wt 0.55 kg / mtr including necessary joining cleats ,glazing clips, rubber neoprene packing , handles 2 Nos. in each door , hinges , anodised aluminium snap beading screws etc.
S&F Factory made box type steel window/Ventilators with hung shutter both glazed and gauged ,shutter frame 60x25mm ERW hollow 'P' section with wall thickness not less than 1mm fixed to pressed steel frame 120mmx 70mmx1.6mm thick including fixing glazed portion,iron grills 8mm suare MS bar hunges with steel handle and fitting, lugs etc, including one coat of primer complete all as shown in drg No BTD 889 sheet 1/4 to 4/4 specified and directed.) (Note :- Wire mesh and glass shall be measured and paid separately under relevent items of sch/BoQ)
S&F sheet glass 4mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane
S&F sheet glass 5.5mm thick ordinary quality and fixed in alum section including solar control film 25 micron reflective type sticked to glass panes as per instruction of manufacturers in squares not exceeding 0.50 sqm in each pane
S&F in repairs aluminium (die cast) body, door closer hydraulically regulated designation No. 3 , universal type , suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed.
S&F for 150mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring,fixed in floor.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width or aperture 1.40 mm
S & F for solid PVC frame (single revated) of size 60mm x 30mm made out of solid pvc foam with homogeneous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100x8 sheet metal CSK Screws complete all as specified and directed by Eng-in -charge.
M & L in repair providing kitchen cabinet and cubboard in required sizes at site made out of 18mm thick one decorative lamination sheet consisting of carcass 18mm thick PVC Sheet & provision of shutters made out of 18mm thick one side decorative laminated PVC sheet all required brackets SS screws etc.The panels shall be fabricated using adhesive and screws where ever required. all the edges shall be covered with 2mm thick edge bonding tape or 90 degree edge bent finish as per make and specification mentioned as drawing and specification approved by Eng-in-Charge.
S&F Magnetic catcher fixed in with nut,screw washer complete all as specified and directed by Eng-in Charge.
S & F 100mm extuded,brass handles,fabricated type polished for cabinet shutters complete all as specified and directed.
S & F Continuous (piano) hinges, brass, bright finish or electro galvanised all as specified.
Dismantling mild steel work of any description.
M & L for Framed work such as angles ,grills,gratings, etc with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders;Fencing, Framed balusters; walk ways; railings; framework of water tanks and similar work etc.all as specified and directed by Eng-in-charge.
M&L preparing surface of wood and wood based surface new on any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer .
M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
M & L providing two coats of synthetic enamel paint over new surface and a coat of red oxide primer on steel surfaces including preparation of surface of any description not exceeding 10 cm width or girth all as specified .
M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint all as specified and directed by Engineer - in - Charge .
Dismantling of floor hearth or wall tiling including cement mortar bedding ( but not backing) and rubbish off the permices.
S&F glazed ceramic coloured tiles joint free 300x450x7mm square or rectanguler as on walls etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick rendering in CM 1:4 all as specified and directed by Engineer - in - Charge
M&L Demolition of Cement Concrete of any description and in any position not oherwise specifically provided for
M&L for 40 mm thick PCC (1:2:4) type C2 (using 20mm graded stone aggregate) as in floor finishing even and smooth without using extra cement complete all as specified .
Material & labour for 75mm thick PCC 1:3:6 type C1 using 20mm graded stone aggregate as in hard standing ,plinth protection/path etc, laid in suitable panels not exceeding 2.5m length finished even and smooth without using extra cement with 10mm Joints filled with bituminous sealing compound of grade ‘A’/bitumen mastic filler/sealant. All as specified complete.
M&L for 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sandcomplete all as specified and directed by Engineer-in-Charge.
M & L for Shotcreting 25MM thick in RCC columns, beams and slabs etc in layers with approved design mix (minimum cement content of 350 Kg/Cum on M-25) concrete having the specified minimum characteristic compressive strength (with ordinary protland cement, coarse sand and graded stone aggregate of 10 mm maximum size in proportion as per design criteria) including the cost of certering and shuttering at edges and corners etc as directed by Engineer-in-Charge including Chipping of unsound /weak concrete material 25 mm average thickness from slabs,beams, columns etc with manual chisel and /or by standred power driven percussion type or of approved make including tapering of all edges, making square shoulders of cavities including cleaning the exposed concrete surface and reinforcement with wire brushes and thoroughly washing with water and allowing it to dry etc. including removal of rust by applying approved rust removal chemical & the coating with Dr Fixit epoxy zinc primer@ 6sqm/ltr at DFT of 100microns as per specifications and disposal of debries for all lead and lifts all complete as per direction of Engineer-in-Charge.
S&F Hard drawn steel wire fabric not exc 4Kg/Sqm cut to lengths, bent to shape required and tying with and including mild steel wire (annealed) not less than 0.9mm in dia supplied and fixed in reinforcemnt all as specified & directed by Engineer-in-Charge.
M & L 5mm thick rendering in Cement Mortar 1:3 on fair faces of brick work or concrete surfaces of ceiling finished even and smooth without using extra cement complete all as specified and directed by Engineer - in - Charge .
Taking down rolling shutters, gear operated of size exc. 10sqm but not exc. 20sqm all as directed.
S&F for rolling shutter thickness of laths 1.00mm without ball bearing,as specified including top cover,anchoring rod,hasp and stapleand one shop coat of primer erected in position as indicated with gear operated type, with bevel gear box and crank handle complete all as specified and directed. Note:- Provision of Safety locks and ball bearings shall be measured and paid for separately.
Taking down and Refixing in same opening for rolling shutter thickness of laths 1.00mm without ball bearing,as specified including top cover,anchoring rod,hasp and stapleand one shop coat of primer erected in position as indicated with gear operated type, with bevel gear box and crank handle complete all as specified and directed. Note:- Provision of Safety locks and ball bearings shall be measured and paid for separately.
S&F Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and directed.
S&F Ball bearing for rolling shutters complete all as specified and directed.
S&F Retro reflective overhead informatory signage and boards, madeup of 2mm thick aluminium sheet,faceto be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTMD-4956-01 as approved by Eng-in-charge,letters,borders etc as per IRC:67-2001 in silver white with blue colour black ground and with high intensity grade pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means suitable sized aluminium alloys,rivets or bolts & nuts @ 300mm c/c allalong the periphery complete all as specified and directed.
SHIVANI ENTERPRISES
A R CONSTRUCTION COMPANY
G S CONSTRUCTIONS
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .