REPAIR AND MAINT TO WALL, FLOOR, JOINERY, PLASTER ETC AND OTHER CONNECTED B/R WORKS AT 663 ARMY AVN SQN (R AND O) AT SHARIFABAD MIL STN UNDER AGE (I) CIF (K)

Amount

Demolition of cement concrete un reinforced in ground floors and pavings not exceeding 15cm thickness (below or above ground level) including disposal of unserviceable materials,debris and rubbish to a distance not exceeding 100 metre, complete all as specified and as directed by the Engineer-in-Charge.

Dismantiling of floor hearth or wall tiling including cement mortar bedding (not backing ) removing serviceable tiles to store and rubbish off the premises.

Taking down cement plastering on stone wall/brick wall etc including racking out of joints hacking for key scrubbing down with water etc

Demolition of brickwork or stone/boulder masonry, build in cement mortar including all quoins, arches, pillars etc, but excluding ashlars facings, dressed stonework and precast concrete articles, complete all as specified and directed by Engineer-in-Charge.

M&L for brick work with sub class `B' bricks straight or curved on plan exceeding 6 metre mean radius built in cement mortar 1:6, complete all as specified and directed by the Engineer-in-Charge.

Material and labour for cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, weathering, slightly rounded or chamfered angles and throating, benching complete all as specified and as directed by the Engineer-in-Charge.

Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar 1:6, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4, surface finished even and smooth without using extra cement, complete all as specified and directed by the Engineer-in-Charge.

Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.06sqm, but not exceeding 0.11sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Glazed ceramic tiles, coloured, of size 350mm x 250mm/450 mm x 350mm, thickness not less than 7mm as in vertical surfaces such as skirting/dado etc, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the shade of tile, fixed over and including 10mm thick rendering (bedding layer) on brick/concrete surface in cement mortor 1:4, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

M&L for Vitrified Ceramic tiles (Dark Shade/Double charged/Ultra charged) 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Non skid ceramic coloured tiles Ist quality 7 to 8mm thick, (square/ rectangular), area of each tile exceeding 0.11sqm, but not exceeding 0.18sqm as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and as directed by the Engineer-in-Charge. Note: Colour and shade of tiles shall be approved by AGE(I) and contractor shall not have any claim whatsoever on this account.

Machine cut kota stone slab 20 to 25 mm thick, as in flooring over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 20 mm thick screed bed or bedding layer in cement mortor 1:6, complete all as specified and directed by the Engineer-in-Charge.

Machine cut kota stone slab 20 to 25 mm thick,as in vertical surfaces such as riser of steps, skirting/dado etc. over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete, laid over and including 10mm thick rendering on brick/concrete surface in cement mortor 1:4, complete all as specified and directed by the Engineer-in-Charge.

M&L for chequered cement concrete coloured tiles of size 20 cm x 20 cm x 25mm thick set, jointed and pointed in neat cement slurry in floors, paths etc, with grey cement and pigment, laid over and including 15mm thick screed bed or bedding layer in cement mortar 1:6, complete all as specified and directed by Engineer-in-Charge.

M&L for plain cement concrete, 1:2:4, type B-1 using 20mm graded crushed stone aggregate, 25mm thick, surface finished fair to receive top layer of flooring, complete all as specified and as directed by the Engineer-in-Charge.

Taking down chowkats or frames with shutters (without taking of shutter from the frame) of any description alongwith fittings n.exc 1.5sqm each

Taking down chowkats or frames with shutters (with out taking of shutter from the frame) of any description alongwith fittings exc 1.5sqm n.exc 4 sqm each

Taking down shutter exc 1.0 sqm but not exc 2 sqm complete all as specified

S&F 2nd class hard wood Plain , solid , straight chowkats and frames, wrought , framed rebated on the solid , rounded or chamfered put together with glue pinned at joints, complete all as specified.

S&F PVC Door frames of size 50 mm x 47 mm made of 5 mm single side pre-lam colour PVC sheet and edges will be painted to match with pre lam sheet reinforced with MS square tube, suppling and fixing in opening as per specification and drawing.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisiting of frame made out of M.S. Tubes for top & bottom rails M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, fixing in the frame at the site as per specification & drawing.

S&F 35 mm thick 2nd class hard wood Plain framed, panelled shutters(any number of panels), with panel of timber flat on both sides (feather edged) or 12 mm thick BWP of veneered particle board medium density wood commercial face veneers fixed to chowkats.

S&F 2nd class hardwood glazed and skelton door shutters 35 mm thick divided into squares open rebated and prepared to receive glass, gauge etc edges of framing plain, chamfered, rounded tfitted with mitred beads for securing glass etc, size of members as specified in SSR Pt 1 section 8 clause 8.20 (b) supplied and fitted to chowkats with plain, chamfered or rounded mitred and rebated bars any numbers.

Supply and fixing factory made uPVC white colour Two track two panels sliding glazed window upto 1.50m height made of (small series) frame 52 x 44 mm & sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multi-chambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.

Supply and fixing factory made uPVC white colour Three track three panels sliding window with fly proof S.S wire mesh (Two nos. glazed & one no. wire mesh panels) upto 1.50m height made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window upto 1.75 sqm) comprising of uPVC multichambered frame, with inbuilt roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified and directed by Engineer-in-Charge. (Glass or wiremesh shall be paid separately) Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made

S&F framed work such as grills & gates, gratings with ends of bars shouldered on forged in spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe 410 (or) Fe-310-0

S&F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperature 1.18 mm fixed with tinned tacks, or galvanised wire staples.

S&F 4.8mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified.

S&F aluminium alloy anodised sliding door bolts 250 mm long with hasp, staple (bolt type)and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts of extruded sections as specified.

S&F aluminium anodised barrel tower bolts of extruded section 150mm long complete all as specified

S&F Butt hinges, medium weight cold rolled mild steel of 100mm size ISI marked.

S&F Extruded aluminium alloy handles fabricated type anodised 150mm size

S & F 300 mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete as fixed in repairs.

M & L for applying two coat of synthetic enamelled paint over one coat of pink primer including preparation of new wooden surfaces of any description not otherwise described over 10 CM girth or width complete all as directed by the Engr in charge

M & L for applying two coat of synthetic enamelled paint over one coat of red oxide primer including preparation of new steel surfaces of any description not otherwise described over 10 CM girth or width complete all as directed by the Engr in charge

Material and labour for preparation of new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer complete all as specified.

M&L for preparation of old painted surfaces after complete removal of existing treatment and applying two coat of oil bound distemper over chalk whiting complete all as specified.

Material and labour for preparation of new plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali-resistance primer paint complete all as specified.

Anodised aluminium frame (powder coated minimum thickness of powder coating 50 micron) for doors, windows,partation wall, ventilators with one or more rebates including joining cleat for fixing etc., complete all as specified and asdirected by Engineer-in-Charge.

Anodised aluminium (powder coated minimum thickness of powder coating 50 micron) door shutters, powder coated of any colour aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, anodised aluminum snap beading screws etc. frame will be fixed to wall , complete all as specified and directed by the Engineer-in-Charge.

Anodised aluminium (powder coated minimum thickness of powder coating 50 micron)window and ventilator shutters, powder coated of any colour sliding/ hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 No.). hinges type B-21 100mm long (2 Nos.) suitable handle (1 No.), complete all as specified and directed by the Engineer-in-Charge.

S&F brass mortice lock, vertical type 4 levers,, size 100 mm, complete all as specified and directed by the Engineer-in-Charge.

M&L for prelaminated particle board, 12 mm thick, interior grade, prelaminated on boat side with decorative choice lamination and fixed with screws to aluminum frame work, complete all as specified and as directed by the Engineer-in-Charge.

S&F plain sheet glass, 4 mm thick glazing with in aluminium frames including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings as required, complete all as specified and as directed by the Engineer-in-Charge.

S&F door closer hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60 kg and fixed, complete all as specified and as directed by the Engineer-in-Charge.

Note :- An amount of Rs. Rs 7,504.00 on account of credit schdule for Sch 'A' Part-II Shall be deducted from the total amount of BOQ to arrive at the contract sum.

CLASSIC JK SUPPLIERS (BID ID -3310094)

M/S RATHER STEEL WORKS (BID ID -3309783)

M/S SHIMAR STAR GLACIER (BID ID -3304500)

M/S A.M. ENTERPRISES (BID ID -3304467)

M/S A Q ENTERPRISES (BID ID -3304402)

rafiq trading co (BID ID -3304171)