15 TH FINANCE TIED GRANT 2024-2025 Ist Allotment

Amount

Dismantling and Clearing away from this site for exisiting damaged condition of work for including cost for all labour charges etc., Complete as per standard Specification. 1.Indian type water closet 1.Indian type water closet :

2.Western type water closet :

3.Plain cement concrete (SOR; SL.NO;28/37G,PAGE NO;22)

4.Cement Plastering work(SOR; SL.NO;74/320,PAGE NO;25)

Supplying and fixing in Position of indian type water closet with all set in brick jelly concrete 1:4:8 Mix concrete 10 cm thick using 20mm brick jelly and top finished with c.m. 1:3 mix 20mm thick without any leakage etc. complete.

B) Supplying and fixing in position colour glazed EUROPEAN WATER CLOSET with 'P' or 'S' trap and double flapped seat cover, 12.50 litres capacity P.V.C. low level FLUSHING TANK including all internal fittings fixed on C.I. brackets, 12mm PVC or brass nipple, chromium plated brown headed stopcock, 12mm nylon connection with necessary teakwood plugs, clamps, screws to the portion coming with walls and floors, including dismantling masonry and redoing the same to the original condition.

Cement concrete of mix 1:4:8 (One cement four sand eight aggregates) using 40mm guage hard broken including cost conveyance of all materials to site and labour charges, transporting and placing in position including shoring, forming protective bunds, cofferdams bailing out of water labour for mixing compacting, finishing and curing, working at depths, tools and plants and incidental charges such as sheeting, shoring and bracing and their subsequent removal etc., complete as per standard specification.

Special Ceiling Plastering in cement motor 1:3 mix (one cement, three sand) 10 mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc., complete.

Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Weathering Course with broken brick jelly 20mm size pure slacked lime over R.C.C. roof slab the preparation of 32:12.5 for required depth and slope etc. complete.

Finishing the top of roof with one course of machine pressed tiles 23 C.m x 23 C.m x 2 C.m size using cement mortor 1:3 mix mixed with 2% by weight of Crude Oil and pointing with Cement Mortor 1:3 mix Cost of all materials and labour charges and brick jelly concrete etc., complete as per standard specifications.

Daddoing with glazed titles of size 300x200x6mm of approved make and quality and clour cement mortor 1:2 10mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification.

Paving the floor with Vertified tiles of approved make and quality and clour of size 300x300x10mm in cement mortor 1:3, 20mm thick and pointing with white cement including finishing jointing and polishing with glossy finish etc complete as per std specification

Supplying and fixing M.S.grill to doors, special windows and ventilators etc as directed by the departmental officers inclusive of cost of MS grill including one of cost red oxide and fixing in position etc., complete (as per the schedule of rate) SL.NO.182 Q3

Painting the new iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications.

Painting the walls two coats over one coat of priming with best Ready mix plastic Emulsion paint of approved colour and quality including preparation of surface and finishing neatly etc., complete complying with standard specification and as directed by departmental officers (S.l.No.359-A)

Wiring with 2 x1.5 sq.mm. (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories with Module Plastic surface mountingswitch box on wall with 6A one way module switch with module front plate with painting of Suitable colourfor Open PVC Light point / fan point (for electronic regulator) ( 6 points / Coil) Lower End SD :262

Wiring with 2 x 1.5 sq.mm (22 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade in suitablePVC rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin noninter locking Wall socket with 5A flush type switch with painting of suitable colour with continuous earth wireconnection of 14 SWG TC wire for open PVC plug point SD:36

Painting the new iron work in all floor two coat of best synthetic enamel paint of approved colour and brand over one coat of primer including scrapping and preparation of surface, cost of breshes and neat finishing complying with stadard specifications.

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V grade insuitable heavy gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion wiith suitable colour SD:45

Supply and run of 2 of 4 sq.mm. (56 / 0.3) PVC insulated SC unsheathed copper conductor of 1100V on 7 / 20 GI bearer wire for service connection mains SD:65

supply and fixing of Eectrical material Woodern board

32 Amp fuse carier

18W 4 Feet LED Fitting with LED

Incinerator for Ladies Bathroom (For School Works)

Wash basin

32A 4P MCB switch

2000 Lt HDPE Tank

Supply and Delivery of PVC Pipes GI Pipes HDPE Hose and Specials etc complete. 110 mm dia PVC 6.00 KG/CM ² pipe

110 mm dia PVC Elbow

110 mm dia PVC TEE

25 MM TANK NIPPLE

25mm dia PVC Tee

25 mm dia UPVC pipe

25mm dia UPVC Elbow

25x20mm PVC Reduce

20 mm dia UPVC pipe

20 mm dia UPVC Elbow

20mm dia UPVC Tee

20mm PVC Threated Lbow

20 mm Waste nut tap

50 mm thick rcc precaust jolly

75 mm thick rcc precaust slab

Providing and laying of 83mm thick high strength type conforming is 15658-2006 of rubberized interlocking paver block in required sizes of minimum compressive strength of 50 N/mm2 in uniform shape of approved make to be laid in flurrying bone pattern with approved non sticking surface in the top and the rate including leveling the base preparation of sub base with stone dust cushion 100mm thick, laying out the pavement cut the pieces to fit the edge, vibrating the pavers, sweeping transporting, loading unloading and laying of paver block as per standard specification.

C.SIVAKUMAR (BID ID -1217282)