Replenishment of inlet at K.M. 22.450 L including 02 Nos. Borewells of SYL Canal.

Amount

Dismantling brick work Tile Masonry or Tile Lining and Tile Terracing in Cement (HSR 8.5 (b)

Dismantling cement concrete plain 1:2:4 mi (HSR 8.6 (d)

Dismantling R.C.C. work with cleaning and straightening and cutting of bas if required (HSR 6.8 (e)

Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead up to 50 m and lift up to 1.5 m, as directed by Engineer-in-charge. All kinds of soil (HSR 4.12.1)

Excavating, supplying and filling of local earth (including royalty) cum by mechanical transport up to a lead of 1 km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete (HSR 4.33)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:2:4 (1 cement : 2 coarse sand (zone-Ill) : 4 graded cum stone aggregate 20 mm nominal size) (HSR 6.1.2)

Centering and shuttering including strutting, propping etc. and removal of form work for : Columns, piers, abutments, pillars, posts and struts (HSR 6.29.3)

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers sqm and cantilevers (HSR 6.30.5)

Steel reinforcement for R.C.C. work, where not included in the complete rate of RCC, including straightening, cutting, bending, placing in position, binding, wastage, overlaps, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire etc. complete in all respect above plinth level. Note:- Reinforcement shall be measured in length including hooks, if any, separately for different diameters as actually used in work , excluding overlaps. Wastage, over1aps, couplings, welded joints, spacer bars, chairs, stays, hangers and annealed steel wire or other methods of binding & placing shall not be measured and cost of these items shall be deemed to be included in the rates for reinforcement. Thermo-Mechanically Treated bars of grade Fe-500D kg or more. (HSR 6.34.6) @ Rs. 68 per kg

Brick work with common burnt clay non-modular bricks of class designation 10 in foundation and plinth in: Cement mortar 1:4 (1 cement: 4 coarse sand) -B bats (HSR 7.21.1)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work below plinth level and up to Floor IV level: 1:3:6 (1 Cement : 3 coarse sand (zone-Ill) : 6 graded cum stone aggregate 20 mm nominal size) (HSR 6.1.4) @ Rs. 3260.00 per cum

12 mm cement plaster of mix : 1 :4 (1 cement: 4 coarse sand) (HSR 11.8.1)

Drilling of bore hole of 10" dia by machine i/c labour (N.S item )

Providing and lowering of well casting/striver/screen 200mm dia UPVC (CS & CM) 10Kg pressure/Cm2 (ISI Marked) Specification as per IS 12818-2010 (N.S item)

Providing and laying of well casting UPVC Pipe 400mm dia (CS & CM) 06Kg pressure/Cm2 (ISI Marked) Specification as per IS 12818-2010 (N.S item )

Providing and fixing 200mm UPVC socket 10 Kg (ISI Marked) Specification as per IS 12818-2010 (N.S item )

Jali,Rivet, brass, disco ,solvent & cap specification as per IS 12818-2010 (N.S item )

Supply and fixing of ss stainless steel v wire screen 200 mm dia specification as per IS 8110:2019 (N.S item rate taken from already sanctioned estimate vide SE SYL Ambala No. 2675-77/138-W dated 05.04.2021

Development of bore well by machine including labour and generator (N.S item )

Supplying, filling, spreading & levelling coarse sand of size range cum 1.5 mm to 2 mm in recharge pit, in required thickness over gravel layer, for all leads & lifts, all complete as per direction of Engineer -in-charge (HSR 33.14)

2nd layer of charcol (N.S item )

Supplying, filling, spreading & levelling gravels of size range 5 mm to 10 mm, in the recharge pit, over the existing layer of boulders, in required thickness, for all leads & lifts, all complete as per direction of Engineer-in-charge(HSR 33.13)

Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per direction of Engineer-in charge. (HSR 33.12)

To evaluate the required sub soil strata and water table in the fields soil conservation report (N.S item )

Providing and fixing UPVC Reducer 16"x8" socket 10Kg (400x200mm)(N.S item )

Providing and fixing of six side cross tee 8" PVC (200mm) (N.S item )

Providing and fixing of end cap PVC 16" (400mm) (N.S item )

Providing and fixing of 200mm dia of UPVC pipe 10Kg pressure/CM (ISI Mark) (NS)

Credit for bricks /bricks bats

Credit of steel

Sh.Devender Sharma Contractor