Construction of pump room cum operator quarter at stage zero under WSS Judda under Languishing

Amount

E/work in excavation by manual means over areas (exceeding 30cm and upto 1.5MTr in width as well as 10Sqm on plan) including disposal of excavated earth upto 1MTr. for cutting edge, disposed earth to be levelled & neately dressed in: (All kind of soil).

Providing & laying in position cement concrete of specified grade excluding the c/o centring & shuttering all work upto plinth level in 1:4:8 ( 1 cement : 4 coarse sand : 8 graded stone aggr. 40MM nominal size (Crusher)

Providing & laying in position cement concrete of specified grade excluding the c/o centring & shuttering all work upto plinth level in 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggr. 20MM nominal size (Crusher)

Dumping stone in horizontal on level including ost of stone

Cement concrete flooring 1:2:4 ( 1cement : 2 coarse sand : 4 graded stone aggr.) finished with a floating coat of neat cement incl. cement slurry but excl. C/o nosing of steps etc. complete( 50mm with 20mm nominal size stone (Crusher)

Brick work with common burnt clay F.P.S.(non-modualar) bricks of class designation 75 in foundation and plinth in Cement mortar 1 :6 ( 1 cement : 6 coarse sand)

Extra for brick work in superstructure above plinth level upto floor V level. (By manual means)

Strctural steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings balconies, shelves, chajjas, lintels, bands, plain window sills, staircases, & spiral stair cases upto floor five level excl. the c/o centering, shuttering, finishing & reinforcement with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggr. 20mm nominal size.

Reinforcement for RCC work incl. straighening, cutting, bending, placing in position & binding all complete cold twisted bars.

centring and shuttering including strutting, propping etc.and removal of form work Foundation, footings, bares of column etc. for mass concrete

Suspended floors, roofs, landings, balconies & access platform

Lintels, beams, plinth beams, girders, bress umers & canti levers.

Edges of slab and break in floors and walls under 20cm wide

Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc including priming coat with approved steel primer all complete Fixed to steel windows by welding

12mm thick cement plaster of mix 1:4 (1 cement : 4 coarse sand).

Providing and fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including lSI marked M.S. pressed Butt hinges bright finished of required size with necessary screws excluding panelling which will be paid for separately,al! complete as per direction of engineer- in charge Second class deodar wood 35mm thick

Providing and fixing 35 mm thick wire gauze shutters using galvanised M.S. wire gauze of average width for aperture 1.4 mm in both directoin with wire of dia. 0.63 mm for doors, windows and clerestory windows with hinges and necessary screws lSI marked M.S. pressed bright finished butt hinges with necessary screws of required size Second class deodar wood.

Providing and fixing glazed shutters for doors, windows and clerestory windows using 10kg/sqm (4mm thick) float glass panes including lSI marked M.S. pressed butt hinges bright finished Second class deodar wood 35mm

Applying priming coat with ready mixed red oxide Zinc Chromate primer of approved brand and manufacture on steel galvanised iron/steel works

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with ready mixed synthetic enamel paint of approved brand and manufacture in all shades to give an even shade New steel work (two or more coats)

Finishing walls with water proofing cement paint of approved brand & manifacture to give an even shade. New work (Two or more coats applied @ 3.84 kg/10 Sqm.

Cement concrete flooring 1:2:4 ( 1 cement: 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete 50 mMThick with 20mm nominal size stone aggregate crushed

Making plinth protection 50 mm thick of cement concrete 1:3:6 ( 1 cement : 3 coarse sand : 6 graded stone aggreagate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth Crushed