Repair to leakage seepage roofing sheets false ceiling water proofing of roof repair to chajja and facias wall panelling and other associated works at Sewar fort Bharatpur

Amount

M&L for 15 mm thick rendering surface fair face of brick- work with cement mortar 1:4 finished even & fair complete all as specified .

All as above item no 1 but on other than fair faces of brick work or concrete surface with cement mortar 1:6 finished even and smooth without using extra cement complete all as specified.

M&L for rendering 15 mm thick in CM (1:4) on fair of brick-work finished fair & even Including taking down cement plaster of any description including racking out joints,hacking for key, scrubbing down with water complete all as specified

All as above item no 3 but in CM (1:6)on other fair faces finished even and smooth without using extra cement complete all as specified

M&L for Rendering 5 mm thick in cement and sand mortar 1:3 on fair faces of cement concrete surfaces of ceiling of chajjas/roof protection etc including finishing the surface even and smooth without using extra cement & Taking down cement plaster of any description etc including racking out joints,hacking for key, scrubbing down with water complete all as specified

M&L for demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) as in Roofs, floors (other than ground floors), beams, staircases, landing, chajjas and similar suspended work complete all as specified

M&L for fixing of Chajja stone (of approved quality) of thikness 30mm, wherever required as per approved design, including inserting/fixing of stone up to 6m height.Complete all as specified . Note :- Quoted rates are includes cost of material , ,safety measures/ use of specified equipments for workers of building required to complete the work at 9m heights & including all leads complete all as specified

Demolition of brick masonry built in cement mortar or cement lime mortar including all quoins, arches, pillars etc but excluding ashlar facings,dressed stone work and precast concrete articles complete all as specified

M&L Brick work with sub class 'B' old size bricks bricks straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:6 complete all as specified.

All as Item No 09 above but except bricks

M & L Preparation of new plastered or un plastered surface of wall including cornices, pilasters etc by brooming down and applying two coats of distemper oil emulsion white or tinted over a coat of wall primer akali resistant priming paint with hand roller complete all as specified

M&L Preparation of new plastered surfaces of walls or un plastered surface and applying two coats of cement base paint over a coat of Priming with alkali resistant priming paint with hand roller complete all as specified.

M&L Preparation of newly plastered surfaces of ceiling & applying three coats of white wash complete all as specified.

M&L for three coats of white wash on new plastered or unplastered surfaces of walls including prepration of surfaces complete all as specified

Demolition of cement concrete unreinforced in ground floor and paving n.exc 15 CM thickness (below or above GL) complete all as specified .

M&L for 25 mm thick plain cement concrete 1:2:4 type B1 (20 mm graded stone aggregate) as in sub base of flooring complete all as specified .

M & L for Endura Designer Collection Series of Jhonson Tiles ,Kajaria or somani tile of size 400x400x10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc.complete all as specified .

M & L for Endura Designer Collection Series of Jhonson Tiles ,Kajaria or somani tile of size 300X300X10 mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 15mm thick base of cement mortar 1:4 in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete all as specified .

M&L dismantling floor,hearth or wall tiling including cement mortar bedding(but not backing) , removing serviceable tiles to store and rubbish off the premises complete all as specified .

M&L Glazed ceramic Tiles,in verticle surface 350X250X7mm/ 450X300X7mm set & jointed in neat cement slurry and pointed in white or colour cement to match over and including 15mm thick rendering in CM 1:4 complete all as specified .

M&L for Coloured Non skid ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, set and jointed in neat cement slurry and pointed in coloured cement over & including 15mm thick rendering in CM 1:4. complete all as specified .

M&L for Vitrified Light Shade ceramic tiles 10 mm thick (Square/rectangular) area of each tile not exceeding 0.36 sqm , over & including 15 mm thick screed bed in CM 1:4 in floors etc, set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified .

Mirror polishing on marble/granite/Kota stone/stone work requird to give high gloss finish complete including necessary repair work & all necessary arrangements complete all as specified.

Demolition and breaking up drain pipes (SGSW, AC or reinforced cement) set in cement mortor internal dia of pipe upto 110mm dia complete all as specified .

S&F 110mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints fixed to walls complete all as specified .

All as Item No 25 but 75mm dia complete all as specified .

S&F in repair vitreous china wash hand basin, white, of size 550x400mm flat back excluding taps, waste, chain and plug but including brackets, cutting for and pinning in ends of brackets or erecting stand complete all as specified .

S&F in repair bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule of 15 mm bore, complete all as specified.

S&F in repair of pillar tap, cast copper alloy with capstan heads,chromium plated, fancy type screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks & fly nuts, screwed for iron pipes of 15mm bore complete all as specified . .

S&F in repair chromium plated 15mm bore stop valve/Angle valve cast copper alloys, screwed down high pressure with crutch or butterfuly handle , screwed both ends for iron pipe or for unions and fixed complete all as specified .

S&F in repair of PVC low level flushing cistern 10 ltrs capacity with inlet ball valve float & handle, syphonic action type including brackets & flush pipe of 32mm dia complete all as specified .

S&F in repair of 75mm PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors, ISI marked complete all as specified .

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified .

S&F Rolled sections as in as in post ,roof trusses (framed), trussed, purlins, crane gantries, rails , fastenings , heavy bracket framing (Beam, tee, angle, channel or flat sections,ms pipe) including distance pieces, cleats etc. conforming to Fe-410W Gde E-250 quality 'A' including cutting,welding etc complete all as specified .

S & F Fe 410-W (Gde E-250)) quality B rolled mild steel in Joist channel, angle or tee,I sections, fixed independently, without connecting plates etc (cut to ordinary lengths i.e, within 20mm of the length indicated) complete all as specified .

Cutting holes exc 150 sqcm but n.exc 400 sq cm into or through brick walls, in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required complete all as specified .

Excavating in post holes (or similar holes) each not exc 0.50 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm, watering, and removing surplus soil to a distance n.exc 50 m and making good surface in soft/ loose soil. complete all as specified .

M&L of PCC 1:3:6 type C-2 (using 40 mm graded stone aggregates ) as in foundations filling and mass concrete complete all as specified .

Dismantling corrugated or semi corrugated Asbestos cement sheets in roof coverings complete all as specified .

S &F for Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified .

M&L for preparation of new untreated steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified .

M&L for one coats painting with synthetic enamel paint to old steel or steel based surfaces of any description, not otherwise described over 10 CM width or girth including preparation of surface including all preparatory work complete all as specified .

S&F of three layer 1000 ltr ISI marked rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position including 20mm brass ball valve Including dismantling of existing water tank of 1000 Ltr capacity complete all as specified .

S&F of 500 ltr ISI marked three layer rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position & including 20mm brass ball valve Including dismantling of existing water tank of 500 Ltr capacity complete all as specified .

Demolition of PCC in roof covering, kerbs, roof kerbs, benching, coved fillets etc including old decayed water proofing treatment of any type all as specified & as directed (also including the rate for disposal of building rubbish/ of dismantled material dumping for lead upto 1km for all lifts) complete all as specified .

M&L for 40mm thick PCC 1:2:4 type B-1(using 20mm graded stone aggregate) in roof covering , benching , etc & finished even and rough complete all as specified .

M&L for screed bed or bedding layer of 15 mm thick cement mortar 1:4, for roof finished even & smooth without using extra cement (mixed with WPC as per instruction of manufacture) complete all as specified Note :- WPC Shall be measured and paid seprately.

Supply only water proofing compound ISI marked complete all as specified .

S&F APP based polymeric membrane not less than 3mm thick, weighing not less than 3.5 Kg/sqm , reinforced with polyster non-woven fabric (weighing not less than 150 gm/sqm and upper side of membrane thermally insulated with white mineral gravel finish, informaly embadded during manufacturing process shall only be used. It shall be laid by torch application,side overlaps shall be 75mm and the ends shall be 100mm and all over laps shall be sealed by torch application including applying a coat of cold applied bitumen primer conforming to IS:[email protected]/sqm & applied a Hot blown coat of bitumen layer spread over primer @ 1.0 Kg/Sqm complete all as specified .

S&F in repair for PVC wall panelling in repair with panel of 300 mm x 4 mm Hollow section of Sintex pattern SPUF- 146 or equivalent , fixed with PVC plug and screw and inserted to next panel groove, edges and corners of all door/ window/openings etc to be covered with PVC angel fixed with solvent cement complete all as specified as manufacturer's Instructions.

M&L for 15mm bore galvanised steel water tubing medium grade ISI marked with all fittings and fixed complete to walls and ceilings or laid in floors including taking up & down the existing GI tubing complete all as specified .

All as per Item No 51 above but 20mm bore complete all as specified .

Taking up or down old serviceable 15mm bore GI pipe & Refixing old steel tubing and connections in new or old position (walls, ceiling, floors, trenches etc ) including cleaning complete all as specified .

All as per Item No 53 above but 20mm bore complete all as specified .

S & F in repair of vitreous china squatting pan, 'Orissa' pattern, size 580x440 mm white, with integral foot rests, 'P' or 'S' trap, including connection to trap, and to flushing pipe, anti-syphonage pipe etc. complete including making good to floor with PCC, Lime concrete bedding complete all as specified .

Taking down chowkats or frames n. exc 1.5 sqm each with shutters (without taking off shutters from the frame) complete all as specified .

Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each with shutters (without taking off shutters from the frame) complete all as specified .

S & F powder coted Anodised Aluminium frame for door,windows,vantilators & Partition with one or more rebates including joining cleats for fixing etc complete all as specified complete all as specified.

S & F powder coated Aluminium door shutter,aluminium section weighing 0.55kg/m including necessary joining cleats glazing clips,rubber neoprene packing Aluminium handle 150 mm 2 Nos in each door, aluminium hinges 03 Nos in each shutter anodized aluminium snap beading screw etc complete all as specified.

S&F powder coated Anodised aluminium window and ventilators shutters,side hung type without sash bars,aluminium section weighting 0.55 kg/m including necessary joining cleats,glazing clips,rubber packng,anodised aluminium snap beading,screws,anodised aluminium fitting such as peg stays 150mm long 1 nos ,hinges type B-21 100 mm long 02 Nos suitable 125 mm long handle 01 No in each shutter complete all as specified .

S&F three track three panels powder coated sliding window (02 Nos glazed SS wire meshay 0.36mm dia of wire and average width of 1.40mm with 5 mm thick flass & 01No SS wire mesh of 0.36 mm dia of wire and average width of aperture 1.40mm wire mesh panels) made of frame 92x44mm & sash 32x60 mm both having wall thickness 1.9+ 0.2mm and single glazing bead of appropriate dimension (area of window upto 1.75sqm), including aluminium extruded interlock, EPDM rubber gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), GI fasteners 100x8 mm size for fixing frame to finished wall and necessary stainless steel screw etc. proflie of frame and sash shall be mitred cut and fusion welded at att corners, including drilling of holes for fixing hardware's after fixing frame the gap between frame and adjustment finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, complete all as specified .

S&F Sheet glass ordinary quality 5.5 mm thick and glazing with oil putty in squares n. exc. 0.5 sqm in each pane complete all as specified .

S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover,governing pivot made of brass,other parts made of mild steel heavy duty and fixed complete all as specified .

S&F in repair Aluminium extruded section body door closer hydranlicelly regulated designation no 3 universal type suitable for door shutter up to 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified.

Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation, boards/slabs/blankets, any thickness, including cover fillets and frame work complete all as specified.

M&L for providing and fixing Gypsum Board 8 to 10 mm thick in ceiling fixed with screws complete all as specified.

S&F 4mm thick designer E-Board fixed or laid/inserted to timber/GI/Aluminium ceiling frame work with screws complete all as specified .

S&F anodised aluminium snap grid frame work of size 605x605mm for false ceiling complete all as specified .

S&F hangers 6mm dia. G.I (up to 1200 mm length ) adjusting level fixed to roof slab by means of ceiling cleats made out of GI flat 40x3mm size 60 mm long and hold fasterners 12.5mm dia 40mm long. complete all as specified .

S&F in Repair Sink made of stainless steel 1 mm thick Kitchen or Laboratory with plugs, washers and wastes; including beding in cement mortar on to dwarf walls or including fixing cantilever brackets and connecting union to waste pipe overall size 710 x 460mm bowl size 560 x 410 mmx230mm complete all as specified .

S&F in repair stainless steel kitchen plate rack made of 1mm thick SS Steel of size 24"X26"X10" fixed with nails/screw on wall complete all as specified .

S&F for Solid PVC door frame of size 50mm x 95mm made out of 5mm Plain colour PVC sheet reinforced with M.S. tube, suppling & fixing in opening as per specification & drawing complete all as specified .

Supplying & fixing in the frames at site factory made Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face, supplying & fixing in frame at site as per specification & drawing complete all as specified .

S&F extruded aluminium alloy handle 150mm size fabricated type anodised, ISI marked complete all as specified .

S&F Aluminium anodised barrel tower bolt 150mm long of extruded section and fixed complete all as specified .

S&F 75 mm butt hinges medium weight cold rolled mild steel, ISI marked, fixed to angle iron chowkats including welding complete all as specified .

M/s Gupta Traders

M/S MAMTA CONSTRUCTIONS

GANGA CONSTRUCTION

VASUNDHARA AND COMPANY

PD GUPTA AND COMPANY

ANANYA CONSTRUCTION CO.

M/s Ranaji Construction Co

krishna Associate