Special repair to Bldg No P-174 under GE West Jalandhar Cantt.

Amount

Demolition of cement concrete of any description and in any position (as in sunken portion also) and removing surplus spoil/debris out of defence land where directed at a level not exc 1.5 m above the starting point all as specified and directed

M&L for 50mm thick PCC 1:3:6 type C1 using 20mm graded aggregate as in plinth protection and path finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

M&L for cement concrete 1:5:10, type E-2 (using 40mm graded brick aggregate ) as in sunken flooring complete all as specified and directed.

M&L for appliying two coats of SHALIMAR SUPERCRETE /NITOBOND water proofing treatment on the entire surface of sunken portion complete all as specified.

M&L for 15mm thick cement screed in CM 1:3 admixed with integred waterproofing compound FOSROC's complast X 421 IC @ 130ml per bag FOSROC's Nito bond AR cement slurry/STP No 1 liquid @ 200ml per bag of complete all as specified.

M&L for 25mm thick PCC (1:2:4) type B0 using 12.5mm graded aggregate as in sub floor , sub base, concrete surface finished even & rough to receive topping floor/tiles complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified

M&L for non skid ceramic designer coloured tiles of size 300 x 300mm x 7mm thick in floor set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles over and including screed bed or bedding layer 15mm thick in cement morter (1:6) for laying floor finishes, complete all as specified and directed.

M&L for coloured glazed ceramic designer tiles of size 300x450x 7 mm thick fixed with neat cement slurry in vertical surface to wall pointing in white/coloured cement to match, over and including 15mm thick rendering in CM 1:4, all as specified and directed

Material & labour for 20-25mm thick machine cut kota stone slab 600mmx600mm laid in floors, slabs and steps etc jointed with grey cement slurry mixed with pigments to match the shade of the slab including cutting, rubbuing and polishing over and including screed bed 20mm thick in cement mortar (1:4) complete all as specified and directed. Note - Kota stone for step shall be in single piece.

All as per item No 10 above but on vertical surfaces such as riser, skirting, dado, etc over and incl 15mm thick cement plaster in CM 1:4 rough finished surface to receive tiles complete all as specified and directed. Note - Kota stone for risers of step shall be in single piece.

M&L for chequered cement concrete coloured tiles 250x250x25 mm thick laid over and including 20 mm thick bedding layer in cement mortar 1:6 set, jointed and pointed in cement mortar 1:3 with grey cement and using pigment as in paths complete all as specified.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in filling and mass concrete, sub base/flooring complete all as specified and directed.

M&L, sand cushioing under concrete interlocking paver block including watering & consolidation complete all as specified and directed.

M&L for 60 mm thick machine pressed precast concrete interlocking paver block any shape & size conforming to IS 15658-2006 , M-35 grade concrete with grey cement & pigment complete all as specified and directed.

M&L for PCC 1:2:4 type B-1 using 20mm graded stone aggregate as in kerb stone complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in postiion not other wise specifically provided for complete all as specified and directed.

Material & labour for mild steel high yield strength TMT bars 10 mm dia and over cut to length bent to shape required, including cranking, hooking ends, bending and binding with and including MS wire (annealed) not less than 0.9 mm dia complete all as specified and directed.

M&L for reinforcement cement concrete type B-0 1:2:4 (12.5 mm graded aggregate ) as in slab supported on wall, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like including necessary formwork complete all as specified and directed.

Taking down cement or cement lime plaster, any description on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water etc and removing surplus soil out of Defence Land where directed at a level not exc 1.5 m above the starting point complete all as specified

M&L for 15mm thick cement plaster in cement mortar 1:6 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 15mm thick cement plaster in cement mortar 1:4 on brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed.

Supply & fix squatting pan WC Orissa pattern size 580mm x 440mm white with integral foot rest (excluding flushing cistern) with P or S trap including provision of lime concrete bedding including breaking up existing damaged WC seat and connecting flush pipe etc making good to match with existing surfaces complete all as specified and directed.

Dismantling of CI pipe 100/75 mm dia pipe, jointed in cement mortar/lead joints and taking out of trenches, if required complete all as specified and directed.

S&F 100 mm dia cast iron soil, waste and vent pipes, in any length with or without ears with cement joints, laid in trenches or in floors/fixed to walls etc complete all as specified and directed.

S&F bends of any radius, and 100mm bore, dimnishing pieces or tapers ( larger bore measured) complete all as specified and directed.

M&L for cast iron "P" trap 100mm dia with grating including jointing to waste pipe fixed in cement contrete type B-1 (1:2:4) complete all as specified and directed.

S&F cast iron 'Tee' 100 mm bore branch pieces, double (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches complete all as specified and directed.

S&F cast iron cowl 100mm bore complete all as specified and directed.

S&F 150mm dia cast iron gully traps setting and jointing with lead joint complete all as specified and directed.

S&F stack clamps made out of 50mmx 5mm flat iron and 16mm dia round iron stays , including bolts and nuts and securing ends of stays to wall and roof complete all as specified and directed.

S&F CP grating of 125mm dia all as specified and directed by Engr-in-Charge

S&F PVC (SWR) pipes with single socketed in any length with rubber ring joints laid in floor or fixed on brick walls 110 mm dia including demolition and breaking up existing pipes n.exc 150 mm dia including all fittings complete allas specified and directed.

S&F PVC (SWR) bends in radius 110 mm bore complete all as specified and directed.

S&F PVC (SWR) junction single, (Single T) equal or unequal, 110 mm bore complete all as specified and directed.

Material & labour for cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landing, steps, cills, sun shades, shelves lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc and making good, cutting not exceeding 10cm girth in brick walls complete all as specified and directed.

M&L for galvanised steel water tubing 15 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking up or down the existing tubing complete all as specified and directed.

M&L for galvanised steel water tubing 20 mm bore, medium grade with & including all fittings fixed to wall, ceilings and or laid in floors etc including taking up or down the existing tubing complete all as specified and directed.

Supply & fix in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with top push type button with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed.

S&F in repair vitreous china urinal, bowl type, angle back of size 430x370x340mm (minimum) complete including providing and fixing plugs bedding urinal against wall in CM (1:2) securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement incl and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe complete all as specified.

S&F PVC connection fibre reinforced 45cm long, 15mm in size with brass check nut and PVC washers at both ends complete all as specified and directed.

Supply & fix in repairs stop/angle valve fancy type chromium plated 15mm bore, cast copper alloy, screwed down with high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket, complete all as specified and directed.

S&F in repair stop valve 15 mm cast copper alloy chromium plated fancy type with long shank &cup (concealed type) with capstan heads, screwed down, high pressure, with crutch or butterfly handle screwed for 15mm bore iron complete all as specified.

Supply & fix in repairs bib taps, cast copper alloy, chromium plated with crutch or butterfly handles, screwed down for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

Supply & fix in repairs shower rose brass chromium plated square type of size 125mm with or without swivel joints including fixing to steel pipe or union of 15mm bore complete all as specified and directed

Supply & fix brass chromium plated tubular towel rail 20mm dia, D type, 600mm long between flanges complete all as specified and directed.

S&F acrylic corner set of 3 pieces of sizes 12''x12'', 10''x10'', 8''x8'' and as per sample approved by Engr -in-charge all as specifed and directed

S&F soap dish stainless steel chromium plated fixed with brass screws and rawl plug complete all as specified and directed..

S&F in repair CP waste coupling suitable for existing WHB complete all as specified and directed.

S&F in repairs waste pipe suitable for existing WHB complete all as specified and directed.

S&F in repair acrylic WHB shelf 600 mm long and 125 mm wide as per sample approved by Engr -in-charge complete all as specifed and directed.

S&F in repair mild steel pipe 25 mm dia curtain rod with PVC coating fixed in including MS hooks, and finials/side brackets (both side), shade as approved by GE all as specified.

Taking down chowkhats or frame area not exc. 1.5 Sq m each with shutters (without taking off shutters from the frames) complete all as specified and directed.

Taking down chowkhats or frame area exc. 1.5 sq m but n.exc 4 sq m each with shutters (without taking off shutters from the fames) complete all as specified and directed.

S&F structural steel framed work as in doors frame or gates, hold fast etc. of angle or other section with gusset plates, rails, braces etc. cutting, drilling and welding complete, drilled for fixing of steel sheeting or other covering. doors etc, to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings and hanging, also fastening and fixing complete all as specified and directed.

Supply and fix 35mm thick factory made plain framed, panelled shutters (two panels), with lock rail and panels of 9mm thick BWP commercial ply or of venered particle board 12mm thick with commercial veneering on both faces with rails and style of 2nd class hard wood. The size of rail and stile as per IS: 1003 (Part-I), kiln seasoned and chemically pressure treated complete all as specified and directed.

Supply and fix 2nd class hard wood factory made glazed and skeleton shutters 35mm thick, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in clause 8.24 (a) of SSR Part-I; supplied and fitted to chowkhats complete all as specified and directed.

S&F butt hinges medium weight, stainless steel , bright polished 100 mm size for fixing on any type of door shutter complete all as specified and directed.

Supply & fix 300 mm long aluminum anodized sliding door bolt with hasp and staple, (bolt type) with bright bolt not less than 12 mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified and directed.

S&F in repair 150mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F in repair aluminium anodised, barrel tower bolts 200 mm long, complete all as specified and directed.

S&F 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed..

S&F aluminum floor door stopper 63 mm with two rubber legged all as specified and directed.

S&F PVC solid door frame of size 50mm x 47mm made out of 5 mm plain/colour PVC sheet to be matched with shutter, reinforced with MS square tube, as per specification and drawing in SSR Part-II complete all as specified and directed.

Supply & fix factory made PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side & as gap insert for top rail & bottom rail panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, but fitted with stainless steel wire guaze panel stretched firmly at edges, wrapped on an additional square 8 mm M S tube complete all as per specified and as directed by the Engineer in Charge.

Supply & fix Steel windows 1.25 mm thick Box type (primer coated) ERW hollow ‘P’ section of size 60mm x 25mm single rebated comprises of glazed skeleton shutter EWR Sec 50mmx20mm and 1mm thick and two open able leaf consisting two Nos sash bar of ‘T’ section 20mm x 3mm complete welded to frame with one vertical mullion of EWR box type ‘T’ section of size 60mmx25mm and 1.25mm thick including cuttings holes and making good dismantled portion in PCC (1:2:4) type B1 using 20mm graded stone aggregate. Four Nos for each window including following fittings welded to framed shutter :- (a) Holdfasts 150mm long 12mmx3mm made to shape per window -04 Nos, (b) Handle of Z Sec 20mmx25mm, 100mm long per leaf-01 No, (c) MS tower bolt 150mm long per leaf -02 Nos, (d) ‘Z’ sec 20mm x 25mm, 100 long stopper per leaf -01 No, (e) Cleat 55 mm long of hollow square 15mmx20mmx63mm welded to hinges per leaf -01 No, (f) MS pintal hinges of size 75mmx12mm per leaf -02 Nos, (g) Fabrication and fixing arrangement as per drawing No CEJZ/TD/1019, Sh 1/3 to 3/3 and No. CEJZ/TD/1020, Sh 1/3 to 3/3. Note : Grills, Glass, wire cloth & painting shall be measured & paid for separately.

All as per srl item No. 68 here in before but of gauged shutter. Note for item No. 68 & 69 :- Drg No. CEJZ/TD-1019 & 1020 are not being uploaded and the same can be seen in office of CWEJRC on any working day. Grills, Wire gauge & painting shall be measured and paid for separately

S&F steel ventilator, fixed type with glazing bars complete all as specified and directed.

Supply and fix mild steel framed work as in guard bars/grills, grating etc with end of bars shouldered and/ or riveted or forged into spikes and similar works including one shop coat of zinc chromate primer complete conforming to Fe-290, Gde E-165 all as specified and directed.

S&F galvanized mild steel wire cloth 0.56 mm nominal dia and average width of aperture 1.18 mm and fixed with tinned tacks complete all as specified and directed.

S&F 4.00 mm thick glass sheet, ordinary quality and glazing with oil putty in square n. exc 0.5 sq. m in each pane complete all as specified and directed.

Dismantling of brick tiles single layer as in roof covering complete all as specified and directed.

Demolition of mud in roofs any thickness including plastering and leeping (whether full thickness removed or only a part thereof) removing debris out of defence Land where directed at a level not exc 1.5 m above the starting point complete all as specified and directed.

Material & labour Cutting out cracks to V-section in existing RCC roof slabs or terracing , cleaning out & filling solidly with a hot mixture of bitumen and clean dry sand 1:1 ( by weight) all as specified

Material & labour for roughening old surface of concrete floors by picking, sweeping cleaning and washing down with water to clean the surface and brushing the neat cement slurry with 3 kg per Sqm complete all as specified and directed.

Material & labour for PCC (1:2:4) type B-0 (using 12.5 mm graded stone aggregate) as in lintels upto 1.5 m clear span, cills, steps, seismic and other similar bands plinth cources, roof kerbs or mud stops, benching, coping, bed plates, parapets, water throughs and the like etc including weathering, slightly rounded or chamfered angles throating etc complete including necessary form work complete all as specified and directed.

M&L for painting the roof surface with a coat of hot blown paving industrial bitumen 85/25 as a bonding material at the rate of 1.20 kg/sqm complete all as specified and directed..

M & L for one coat of bitumen primer conforming to IS-3384 @ 0.40 Kg/Sqm complete all as specified and directed.

M&L for roof treatment by providing a layer of APP based polymeric membrane minimum weighing 3 Kg/Sqm and minium 3mm thick reinforced with polyster non woven fabric (wt. not less than 150 gms/Sqm) laid on primed surface by forced application complete all as spd and directed

Material & labour for 40mm thick brick tiles laid on 15mm thick cement mortar (1:3) and joints grouted flush in cement mortar (1:3) mixed with 5% of crude oil by weight of cement complete all as specified and directed.

All as per Item No 82 above but except brick tiles complete all as specified and directed.

M&L for flush pointing in cement mortar 1:3 on brick tiles laid flat on roof surfaces etccomplete all as specified.

Demolition of brick work or stone/boulders masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc. and rubbish materials remove from site complete all as specified and directed.

M&L for brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM 1:6, complete all as specified and directed.

All as per item No. 86 above but except bricks complete all as specified and directed.

Material & labour for bricks work as in half brick thick wall using sub class `B’ bricks straight or curved on plan to any radius built in cement mortar 1:4 complete all as specified and directed.

S & F 1000 ltr rotational moulded polyethylene water storage tank double layered (cylindrical vertical with closed top) hoisted and fixed in position including dismantling of existing tank of any description with ISI marked complete all as specified and directed.

S&F 20mm dia ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight-210gms.) complete all as specified and directed.

S&F in repair 20 mm bore stop valves, cast copper alloy, screwed down, high pressure with crutch or butter fly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

M&L for preparing new plastered or unplastered wall surfaces and applying two coats of cement base paint complete all as specified and directed by Engr-in-charge.

M&L for preparing new plastered surfaces of walls by applying two coats of oil bound distemper over a coat of primer complete all as specified and directed by Engr -in-charge.

M&L for three coats of white wash on newly plastered surfaces of ceiling including preparation of ceiling surfaces complete all as specified and directed by Engr -in-charge.

M&L for complete removal of existing treatments by washing, rubbing down and stopping etc on wall surfaces and applying two coats of cement base paint complete all as specified and directed by Engr -in-charge.

M&L for preparation of old decorated surfaces of walls, washing, rubbing down and stopping of distempered or painted surfaces and applying two coats of oil bound distemper complete all as specified and directed by Engr -in-charge.

M&L for preparation of old surfaces of ceiling including scraping down smoke soots, moulds, moss and trading oil and greasy spots etc including cornices, pilasters etc( Plastered or un plastered surfaces) and applying two coat of white (lime) wash on ceiling surface complete all as specified and directed by Engr -in-charge.

M&L for preparation of old plastered surfaces or unplastered surfaces of walls and applying two coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new wood or wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed by Engr -in-charge.

M&L for preparation of new steel surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc chrome primer complete all as specified and directed by Engr -in-charge.

Taking down carefully existing point wiring of any type (i.e. wooden surface conduit casing capping or concealed conduit) complete for light or fan or socket or power etc on wooden batten or in conduit including fittings and accessories like switches, sockets, regulator, wooden board and making good disturbed portion to match with existing complete all as specified and directed.

Taking down submain wiring of two single core PVC cable, PVC insulated 4/6 sqmm including conduit or wooden batten and remove from the site of work and making good the disturbed surfaces of wall or floor etc as directed by Engr-in-charge.

Taking down main switch/DB of any size and making good distrub surface of wall/floor complete all as specified and directed

Material & labour for concealed point wiring complete with single core 1.5 Sqmm (nominal area) PVC insulated and unsheathed cable 1100 volts multistranded, copper conductor cable (FRLS) drawn through and including PVC concealed conduit not less than 20mm dia bore medium grade (ISI marked) and accessories like bends, tees, junction boxes etc, fix on wall or ceiling surfaces all as specified including 1.5 sqmm , FRLS, copper multistranded cable as earth wire including sunken pressed steel terminal boxes and bakelite white/ coloured top sheet cover 3.0 mm thick , for One light point / fan point/exhaust fan point controlled by one way switch complete all as specified and directed.

All as per srl item No 105 here-in-before but for 3 pin socket outlet, 5 Amps on same board with other switches complete all as specified and as directed

All as per srl item No 105 here-in-before but 3 pin switch socket outlet, 5 Amps on independent board complete all as specified and as directed

All as per description of srl item No 105 here in before but using 4 sqmm (nominal area) multistranded copper conductor FRLS cable including PVC cable copper conductor with 4 Sqmm PVC insulated copper cable for continuous earth continuity conductor and connecting for earth dolly for 6 pin socket out let 15 Amps on independent board. complete all as specified and directed

S&F switch piano flush type 5 amp, SP one way, 230 volts, AC complete all as specified and directed.

S&F switch piano flush type 15 amp, SP one way, 230 volts AC with ISI marked complete all as specified and directed.

S&F socket outlet 5 pin, 5 Amps flush type multipurpose complete all as specified and directed.

S&F socket outlet multipurpose 2 in one, 3 pin 5/15 Amps flush type multipurpose complete all as specified and directed.

Supply and fix lamp holder PVC/Polycarbonate with back plate suitable for batten fittings including connecting electrically to ceiling rose including 5 watt LED bulb complete all as specified and directed.

S & F ceilling rose surface type bakelite 65x50mm three terminal complete all as specified and directed

S & F stepped type (five step) electronic fan regulator and connecting up, 230 volts complete all as specified and directed

M&L for sub main wiring with two runs of single core PVC insulated, unsheathed copper condutor, multi stranded cable of size 6.00 Sqmm 1100 volts grade drawn through PVC concealed conduit of size 25 mm (ISI marked) including PVC accessories complete incl cutting and chasing and making good etc including one run of 6.00 Sqmm single core copper conductor multi-stranded PVC insulated, unsheathed cable as earth wire continuity conductor complete all as specified and directed by Engr-In-Charge Note: Two runs of 6.00 Sqmm cable and one run of 6.00 earth wire & 25 mm PVC conduit shall be measured as one unit.

Supply, laying and testing LT cable XLPE/PVC insulated armoured and with aluminium conductor 1100 volt grade 25 sqmm 4 core laid in trenches in floor, in ducts, through pipe or fixed along the pole including removing the existing cable of any type complete all as specified and directed. Note:- 1. Excavation, earth work, sand cushioning, and brick protection shall be measured and paid for separately. 2. Rate of necessary lugs, thimbles and jointing material shall be included in unit rate.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m depth in soft/loose soil for laying of cable/GI pipe and getting out complete all as specified and directed.

Returning filling in including spreading,levelling,watering, well ramming in layers not exc 25 cm each complete all as specified and directed.

Supply and spread river sand in trenches as cable cushioning 8 cm below the cables and 15 cm above the cables all as directed and directed Note : Punned down thickness shall be measured.

Removal of surplus soil to a distance not exc 50 m and deposited where directed at a level not exc 1.5m above the starting point complete all as specified and directed.

M&L for brick protection using old size sub class 'B' bricks, laid flat dry but adjoining to each other laid length wise perpendicular to the axis of cable complete all as directed and directed

Supply and fix DB, SPN 8 way double door for MCB 240 Volts with 200 Amps rated bus bar complete all as specified and directed.

Supply and fix distribution board vertical TPN, double door, 4 way 240 volts with sheet metal enclosure 200 amps bus bar, suitable for fixing of MCCB complete all as specified and directed.

Supply & fix MCB, 32 to 63 amps SPN 240 volts, B series complete all as specified and directed.

Supply & fix MCB, 6-32 amps SP 240 volts, B series complete all as specified and directed.

Supply & fix MCCB TPN, 100 Amps 415 volts complete all as specified and directed.

Supply & fix in replacement LED light fitting 22W (double side) including LED lamp with 2100 lumen output with internal surge protection device of 4KV with voltage band of 140-280V CRI-6500K (White light) fixtures box type with retrofit LED rod 20 watt and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor of size 0.75mm 3 core complete all as specified and directed.

Material and labour for earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of theplate not less 1.5 mtr deep below normal ground level connected to GI earth wire 4mm dia connected to earth plate earth plate by means of nut, bolts, check nut & washer of galvanized iron or of steel, GI earth wire will be protected by 15 mm dia GI pipe 'light grade', watering pipe 20 mm dia GI 'light grade', GI wire meshed funnel, alternate layer of char coal and salt on all side to earth plate upto thickness of 150 mm, filling of black cotton soil in earth pit upto ground level, PCC chamber recessed for and including RCC cover including all necessary excavation & earth work, earth wire connected to O/H continuous earth wire on pole, testing the earthing after completion complete all as specified and directed. Note :- PCC chamber shall be (1:3:6) using 20mm graded stone aggregate and 50mm thick RCC (1:2:4) type B-1 cover slab reinforced with 8mm dia TMT steel bars @ 100mm c/c both ways complete all as specified and directed.

Supply & fixing LED street light fitting 25 W made of pressure die cast housing with toughned glass and high power LEDs with secondary optics, IP-66 with surge protection device of 10 KV, IK7 external SPD including bracket nuts, bolts, washers as required for fixing and connection using PVC insulated and overall sheathed flexible copper conductor of size 0.75 mm 3 core incl bracket and fixing complete all as specified and directed by Engr-in-Charge

Supply and lay GI tubing light , grade 40mm bore with all necessary fittings laid in trenches under road crossing in floors complete all as specified and directed.

BINDU ENTERPRISES

NIRMAL SINGH

G S TRADERS

PAUL CONSTRUCTION CO.

AAY KAY ENGINEERS

Barmotra Infrastructures

M/s Nirmal Singh and Co.

M/S Vinod Kumar

M/s GURFATEH BUILDERS