PROVN OF 04 x GARBAGE BIN WITH FOOTPATH AT 224 FD REGT AND CERTAIN REVENUE AND MINOR WORKS UNDER AGE BR-II AT GE JHANSI

Amount

Surface excavation not exceeding 30 cm deep and averaging 15cm deep and getting out in any type of soil.

Excavation over areas not exc. 1.5m deep in any type of soil and getting out, complete all as specified & directed.

Excavation over areas exc 1.5m but not exc. 3.0m deep in any type of soil and getting out, complete all as specified & directed.

Excavation over areas exc 3.0m but not exc. 4.5.m deep in any type of soil and getting out, complete all as specified & directed.

Excavation in trenches n exc 1.5m wide and n exc 1.5m in depth for foundation, etc or for the shafts, well, cesspits, manholes, pier holes, etc n exc 10 Sq m on plan and n exc 1.5m in depth and getting out in any type of soil, complete all as specified & directed.

Returning, filling in excavated soil, including speading, levelling, watering and well ramming in layers not exc 25 cm, complete all as specified and directed.

Removing excavated material to a distance exc. 50m upto 100 m and depositing where directed at a level n exc. 1.5 m above the starting point,complete all as specified and directed..

Spreading and leveling of soft/loose soil in floor in layers n exc. 25 cm thick including well ramming watering as required.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

M&L for PCC 1:4:8 type D-2 using 40mm graded crushed stone aggregate as in foundations, filling & mass concrete, complete all as specified & directed.

M&L Brick work with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6. all as specified and directed.

M&L for brick work with old size bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4 complete all as specified and directed.

Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4

M&L for brick work with sub class 'B' bricks in one brick thick honey comb work, built in cement mortar 1:4 complete all as specified and directed.

M&L for broken brick bats Loose filling with aggregates of gauge 80 to 150 mm in soakage pits, soakage wells, complete all as specified & directed.

M&L 40 mm thick Damp proof course in cement concrete (1:2:4) type B-0 to horizontal or vertical surfaces including necessary formwork using water proofing compound @ 3% by wt of cement.(WPC will be measured separately)

M/L providing RCC (Nominal Mix) M-25 (using 20 mm graded stone aggregate) as in footings,foundations, plinth beam etc of any type complete all as specified

M/L providing RCC (Nominal Mix) M-25 ( using 20 mm graded aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M/L providing RCC (Nominal Mix) M-25 ( using 20 mm graded aggregate as in beams cantilevers, lintel etc complete all as specified and directed.

M/L providing RCC (Nominal Mix) M-25 ( using 20 mm graded aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter

Use and waste of formwork to sides of pillars, posts, struts, piers, columns and stanchions

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc.

Use and waste of formwork to flat soffits of suspended slabs such as roof slabs, floor slabs and lintels, landingand similar work n exc 200mm thick.

Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10cm wide all as specified and directed.

M & L Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

S&F TMT 6 to 8mm TMT cut to length bent to shape required, including cranking, bending and hooking,s pirally & binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

Mild steel TMT bars 5mm dia and over upto and including 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia complete all as specified and directed.

M&L for mild steel work as in plate girder or single stanchions, built up of one beam or channel section with flange plates, caps, bases, splices, angle brackets, cleats and other connections and similar works, confirming to Fe 410-W (Gde E-250) quality A, with and incl all machine wks i.e. cutting, bending, welding, grinding etc, complete all as specified and directed.

M&L for mild steel work as in flat, angle, channels or tee sections fixed independently, without connecting plates, etc (cut to ordinary lengths) i.e. within 20 mm of length indicated etc, and similar works confirming to Fe 410-W (Gde E-250) quality A, with and incl all machine wks i.e. cutting, bending, welding, grinding etc, for holding GI pipe of cattle trap, complete all as specified and directed.

M&L for 50 mm dia GI pipe heavy duty with all fitting, comlete, fixed on channel / girger for cattle trap, with and incl all machine wks i.e. cutting welding, griding etc, comlete all as specified and directed. Note: The pipe will not to be welded with any MS section / holding MS plate and will be kept free to rotate/move. Make: Jindal/ Prakash Surya/ Tata.

M&L Providing, cement concrete type B0, 1:2:4 (using 12.5 mm graded aggregates) in roof kerbs or mud stops, rounded or chamfered on edges, in plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, comlete all as specified and directed

Material and labour providing precast reinforced cement concrete 1:2:4 type B1 using 20mm graded stone aggregate as in manhole / drain cover slabs including necessary form work etc.,comlete all as specified and directed. Note : Reinforcement shall be measured and paid separately.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in copings, lintel etc, complete all as directed.

S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing. The door frame shall be tied to the wall using 75/100mm long MS screw complete all as directed.

S&F factory made solid PVC moulded door shutter 28 to 30mm thick (Stiles) with 2, 4 or 6 raised panel design with 2mm thick Wooden texture moulded PVC sheet on the front face and 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification and drawing, complete all as specified and directed.

M&L for 100 mm butt hinges stainless steel medium weight approved make ISI marked

S&F 125 mm aluminium alloy handles, cast type anodised all as specified.

S&F150mm aluminium anodised barrel tower bolts of extruded section and fixed.

S&F steel ventilator with top hung shutter including hinges, handle and steel peg stay complete including taking out old ventilator complete all as specified and directed.

S&F 3.00mm thick figured glass, pin head type and glazing with oil putty in square n exec 0.5 sqm in each pane

M&L cement concrete 75 mm thk, type D2 1:4:8 (using 40 mm graded stone aggregate) in sub base of flooring.

M&L 25 mm thick cement concrete (1:2:4) type B-0, (using 12.5mm graded aggregate) in flooring

M&L for non skid colour ceramic tile 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed or bedding layer of 15 mm thick, in CM 1:6.

M&L for Glazed ceramic coloured walls tiles in vertical surfaces 450x300x7 to 8 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering on vertical surface of wall or concrete surfaces in CM 1:4 to receive wall tiles.

M&L for factory made PU coated, machine pressed precast concrete interlocking paver block of any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with coloured pigment, made of PVC moulded (or rubber mould) with vibrating system laid over and including 50 mm thick sand cushion, with and including rendering in CM (1:3) in edges of pavers, complete all as specified and directed. Note : The cost of sand cushion is included in quoted rate

M&L 40 mm thick cement concrete (1:2:4) type B1 ( using 20 mm graded stone aggregate) in flooring, finished even and smooth with using extra cement .

S&F 3 mm thick glass dividing strip 38 mm wide insert in floor

M&L 75 mm thick cement concrete type C2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection and path, laid in panels, not more than 3.0 mtr in length, laid to slope 1:30 incl forming joints 10mm wide and duly filled with mastic bitumen (01 part bitumen mixed with 03 parts of sand) surface, complete all as specified and as directed. Note : The quoted rates are deemed to be inclusive of material against form work and joint fillings.

M&L Rendering 15 mm thick on fair faces of concrete surfaces in cement mortar 1:6 for finished even and smooth without using extra cement complete all as specified and directed.

M&L 15mm thick rendering on fair faces of brick work or concrete surfaces of wall in cm (1:4) is to be finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering in two layer on fair faces of brick work or concrete surfaces of wall 5 mm thick in CM 1:4 mixed with WPC @ 3% by wt of cement for finished even and smooth without using extra cement over 10 mm thick rendering in cement mortar 1:6 (WPC will be measured and paid separately). smooth without using extra cement.(WPC will be measured separately)

Supply only integral liquid water proofing compound. Make : Dr Fixit LW + Professional or equivalent of Fosroc / Sika

M&L rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:4 for finished even and smooth without using extra cement

M&L rendering 10 mm thick on fair faces of concrete surfaces in cement mortar 1:6 for finished even and smooth without using extra cement complete all as specified and directed.

M&L rendering 5 mm thick on ceiling concrete surfaces in cement mortar 1:3 for finished even and smooth without using extra cement complete all as specified and directed.

Preparing newly plastered surfaces of wall and applying three coats of white wash complete all as specified and directed.

Preparing newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

Preparing newly plastered surfaces of wall and applying one coats of cement base paint over a coat of cement base primer complete all as specified and directed.

S&F 15mm bore galvanised mild steel tubing medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as directed.

S&F 20mm bore galvanised mild steel tubing medium grade with all fittings and fixed to walls and ceilings or laid in floors complete all as directed.

S&F for 15 mm bore concealed stop/angle cock CP, fancy type with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed

S&F 15mm bore long body bib tap,CP, fancy type, cast copper alloy with crutch of butterfly handle, screwed down, high pressure for iron pipe or for brass ferrule

S&F for 15 mm bore pillar tap made of cast copper alloy, chromium plated fancy type, suitable for 15 mm dia bore pipe, complete all as directed.

S&F for 15 mm bore angle cock CP fancy type with long shank and cup screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed all as specified and directed

Supply and fix SS Towel rail 600 mm long fixed with and including chromium plated brass screws and wooden/plastic cleats.

S&F Vitreous China wash basin, white flat back, size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as directed

Supply & Fix in repairs Vitreous China Squatting pan, 'Orissa' pattern, size 580 x 440 mm white with integral foot rests (excluding flushing cistern and flush pipe) including provision of cement concrete bedding and making good surfaces complete all as directed. as specified. Make:- Cera (Ist Quality),Parry ware (super fine),Hindware(Ist Quality).

S/F PVC low level flushing cistern 10 lts capacity with ball valve float and handle ,syphonic action type including brackets and flush pipe of polythelene of low or high density or PVC 32 mm dia low level flushing cistern fixed in repairs all as specified and directed.

S&F Vitreous China urinal half stall type white (excluding Flushing cistern, flush pipe and waste pipe).

S&F Vitreous China urinal full stall type white (excluding Flushing cistern, flush pipe and waste pipe).

S&F PVC flexible waste pipe suitable for wash hand basin

S&F CP urinal spreader for fixing with 15 mm dia pipe

Supply and fix PVC connection 15 mm size with PTMT nuts of length 450 mm long.

Supply and fix shower rose of PTMT any colour for fixing with 150 mm pipe swivel type fixed to GI pipe

Supply and fix shower rose of PTMT any colour for fixing with 150 mm pipe swivel type fixed to GI pipe

S&F grating square 150 mm size of PTMT (Minimum weight 100 gms)

S&F 32 mm bore waste coupling of PTMT (half of full thread) (Min weight 45 gms each)

S&F tubular towel rail 20 mm dia 600 mm long brass CP including brackets fixed in repairs complete all as directed.

S&F in repairs 75mm bore branch pieces, single (equal or ;unequal) ordinary or inverted (spigot or socket type) or with parallel branches with access door all as directed

S&F of rotational moulded polyethylene cylindrical vertical with closed top water storage tank triple layered WHITE COLOUR 500 Ltr capacity with connecting nipple, hoisted and fixed in position on new or existing foundation and making GI tubing inlet or outlet connection, complete all as specified and directed. Make : Sintex / Vectus / Supreme

S&F in replacement of 20 mm dia of Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iorn pipe and fixed. (minium weight 20 mm-210 gms) etc, complete all as directed. Make : Prayag / Polytuff / Pearl

S & F in repairs 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

M&L concrete bed to drain pipe for 150 mm dia pipes in PCC (1:4:8) type D2 using 40 mm graded stone aggregate incl packing under and haunching against the sides of pipes after they are laid and tested including provision of 150 mm salt glazed stone ware drain pipes grade A ISI marked laid in trenches and jointed as specified

M&L for 150x150 mm dia salt glazed stoneware gully trap, square or round mounted, type "P" as specified.

Supplying laying and testing of SGSW (Salt glazed stoneware) 150 mm drain pipe grade ‘A’ laid in trenches to level /gradient, jointed in CM 1:1 complete all as specified.

M&L for construction of soakage wells, with and incl excavation in any type of soil, foundation in PCC 1:3:6 type C2, walls of Honey combed masonry and solid in M-25 concrete, including intercepting chamber, screen chamber made of Brick masonry work in CM 1:4, RCC cover slab in M-25 (with and incl reinforcement), Filling with brick bats, complete of size 3.0 Mtr dia X 3.00 Mtr deep (effective depth), complete all as specified and directed. (Refer and read TD Drg No. CEBZ/TD/76/2011 SHEET 1/2 and 2/2). Note :- 1. The Reinforcement shall be used 10 mm dia 150 mm c/c in main bar and distribution bars. 2. The cost of all kind of earth work, brick masonry work, plastering, coping, RCC slab, reinforcement, form work etc is deemed to be included in quoted rate only.

S & F 110 mm bore PVC (SWR) Soil, waste and vent pipes single socketed in any length with rubber ring joints fixed to walls/trench.

S & F 110 mm bore PVC (SWR) bends of any radius complete all as specified and directed.

S & F 110 mm bore PVC (SWR) junction single (Single `T') equal or unequal.

M/sDaljeet singh keer

M/s JS Constructions