Development of Park on vacant land near H. No. 120 Sector-9A Ward 14 MCG.

Amount

NS Item

"Knee HIP Raise:- Providing, and fixing Knee Hip Raise of size 1105 X 550 X 11480 mm make of Green Gym or Equivalent fabricated with main post of 140 rum din and 3.0 mm thick rest or the pipes are 40mm dia and 2.5 mm thick all pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Mao Nobel or equivalent of 80-120 micron thick. All welding joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. PadaIs shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company to be approved by Officer-in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M25 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Officer-in-Charge regarding material, shape of equipment, colour on metals_sea and htme pnver plate and fixing of equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC to full satisfaction of engineer in charge complete in all respect.

"Double Cross Walker/ Cross trainer double:- Providing, and fixing Double Cross Walker of size 1600 X 600 X 1600 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40 mm dia and 2.5 mm thick all G.I pipes made up of hot rolled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All welding joints of G.I pipes are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and U V resistant environmental friendly. Bearing used shall be maintenance free, duly oiled sealed and self lubricated made by reputed company like SKF to be approved by Officer -in-Charge. Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of G.I pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength N425 and J shaped welded bolts and once the concrete is set, fix the equipment on to it and cover nuts and bolts with the base plate cover, all complete as per direction and approval of Engineer-in-Charge regarding material, shape of equipment, colour on metal, seat and base cover plate and fixing of equipment etc." The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect.

Bridge Ladder: 10’L x 2’W x 6’H. Horizontal ladder is of G.I pipe jindal make 2”, ¾” & vertical ladder is of same material of 12 gauge ISI mark with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site with 2 years defect liability period free of cost to full satisfaction of engineer in charge.

Dips/Chair ad Push Chair:- 1. Dimensions (LxWxH) 1400 x 1200 x 2100mm. 2. Fabricated with main post of NB 50mm (G.I) 'C' Class pipe of approved make. 3. Main frame of NB 50mm (G.I) 'C' Class Pipe. 4. Leg support of NB 32mm (G.I) 'C' Class Pipe and other support of NB 25mm (G.I) 'C' Class Pipe. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated using akzo Nobel or equivalent paints of 80-120 micron thick . 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 9. Once the concrete is set, the equipment is fixed on to it . 10. High tensile steel with galvanized nut bolts are used for assembly. 11. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment. 12. Self-explanatory stainless stell lable fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, Transportation, Installation at site complete in all respect to full satisfaction of engineer in charge complete in all respect.

Foxtail bottle pain 7'8' ht 13"x13" ploybag well grown

Providing and stacking of Areca Palm plant, having ht. 90 cm to 1.20 m with 4 to 5 suckers, well developed, fresh and healthy with lush green foliage in 20 cm size of Earthen pot / Plastic pot.

Providing and stacking of Raphis palm plant, having ht. 45 cm to 60 cm with 5 to 7 suckers well developed full of fresh and healthy leaves in 25 cm size of Earthen pot / Plastic pot.

Providing Cyprus golden well shaped developed with good colored foliage fresh & healthy 60 to 75 cm ht. in 30 cm Earthen Pot

Providing Ficus Retusa Topairy well developed with fresh & healthy 5 to 6 big ball specific size and shape 180 to 210 cm ht. in 40 cm cement pot

(i) 6 No. Ornamental Design FRP Molded Pillar FRP base pedestal with vertical fitted design having base width of size 260mm x 260mm and height 900mm having 4 no. of size 20mm drilled in the base with hold fasts and having B class vertical G.I pipe of size 88 mm and height 2890mm, the central G.I pipe holds FRP Molded taj 6no of size 260 x 260 x 210mm high suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U Paints in required shade. (ii) 12 No. spndred and 6 no. Friezes Floral and Ornate decorative design combination of spandrel and frieze, matched to be suspended between two G.I pillars as per the design. The spandrel (L-Bracket) having length 420mm and height 400mm the frieze (Top Panel) height 250mm and length as per the size of the gazebo. The frieze mounted on G.I tabular pipe frame of size 50mm x 25mm, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U Paints. (iii ) 3 No. cast iron/frp base panel railing with frame Floral and Ornate decorative design cast iron/frp side railing panel as per design having height of 730mm and length as per size of Gazebo. Each panel top and bottom mounted with mild steel tubular pipe frame of size 50 x 25 mm. The bottom mild steel pipe having 2 nos. of hold fasts in G.I pipe of size 40 x 40mm and length 250mm welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U Paint in required shade. (iv) One set of top frame with Double Finishing FRP Molded Plastic Sheet roof Top frame in G.I tubular pipe of size 40 x 40mm properly welded and grinded. The top frame mounted with FRP molded Sheet of 4 mm thick with top & bottom good finishing (Double finishing sheet) to make it rust proof bent to profile of size 245mm width in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contain FRP Moulded Ball of 14”Dia x 2mm thick at the central top for its beautification. Each sheet enamel painted in red color. Each such sheet properly riveted to horizontal sheets. The complete item is fitting at site with installation. (Including fixing at site and supervision & transportation & all type taxes).The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liabilty period free of cost to full satisfaction of engineer in charge complete in all respect.

[DNIT Dev. of park Sec-9 H. No. 120.xlsx]NS ITem 2'!$C$15

Providing and stacking Bauhinia blakeana (kachnaar) plants height 120-150 cm in big poly bags of plants size 25 cm

Bottle palm with clear stem 3', ht. 7'-8'

Merry-Go-Round (4 seater): 5' Dia. Main frame is of G.I sq. pipe 2" x 2" x 14 G and having suitable handle & foot-rest is of G.I round pipe 3/4" x 12 Gauge. Central pipe is of G.I pipe 3" x 12 G which further supports with G.I pipe 1” x 12Gauge with heavy duty shaft 50 mm thick & ball bearing assembly. It consists of 4 no Chair made of Molded FRP Plastic in 3mm thick with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site including 2 years defect liability period free of cost.

Bougainvillea named variety Sobhra, Thima, Marry Palmer, Cherry Blossom, etc well developed with fresh and healthy bushy plants in full bloom 75 to 90 cm height plant in 40 cm Cement Pot

Providing Bamboo Buddha valley with fresh & healthy 3 to 4 suckers having 75 to 90 cm ht. plant in 25 cm size Earthen Pot/Plastic pot

Providing Clerodendrum splendens plant of height 30 cm to 45 cm in 20 cm size of Earthen pots/ Plastic pots

Providing Ficus Resinold (Gold) 7'-8' ht. 25"x25" polybag

Sea-Saw (4 seater): 8’ L x 5’.5 W x 15” high. Frame is of G.I pipe 2” x 12gauge. Sitting planks is of G.I pipe 2” x 12 gauge and its cantilever & handles is of G.I pipe ¾” x 12 Guage .Sitting seats-4 nos is of molded FRP material in 3mm thick with suitable PU Primer & PU Paints. The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of engineer in charge.

Victorial Steel sitting bench of size 61"(L)x29½” (H)x 18½” (D). Seat with 5 steel pipe and back with five steel pipe of size 47mmx23mm rectangular of 16 gauge ISI mark e.r.w. spl. Pipe fixed with C.I. frame on both sides with durable nut-bolts duly welded to protect it unscrew. All duly anti rusting Red Oxide primered before P.U. bus green spray paint coating long lasting. Weight 65 KG per bench. (Including all types of taxes)

Chain Swing (2 seater): 10’L x 5’.5W x 8’.5 H. Horizontal frame & vertical legs is of G.I pipe of jindal make 2” x 12 gauge. It stays with G.I pipe 1” x 12 gauge. Swinging seats-2 nos is of FRP molded Seat of 2mm thick fitted with m.s pipe ½” frame x 12 gauge which hang with G.I chain 6mm thick duly plated with ball bearing & m.s flat 6mm thick housing with suitable PU Primer & PU Paints. The rates are inclusive of all taxes with 2 years defect liability period free of cost to full satisfaction of engineer in charge.

FRP Dustbin (Tilting Type) of capacity 60 LTR. Body is made of moulded fiberglass re-inforced plastic of 2mm thick having its lid with handle. It fitted with m.s square pipe 1.25” x 1.25” x 14 gauge & m.s flat 50 x 5mm, 30 x 5mm base structure with suitable PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site.

Multi Play Spiral-N-Tunnel Station Covering Area: 30’L x 20’W It contains: FRP Spiral Slide 6mm thick inclined at 5’H – 1 no FRP Tube Slide inclined at 5’H – 1 no FRP Wave slide 6mm thick inclined at 5'H - 1 no FRP Bowl slide 6mm thick with FRP Entry Gate inclined at 3’H – 1 no FRP Stair 3mm thick inclined at 3’H- 1 no FRP Platform Hex. Shape 5mm thick in 7’Dia – 2 no. FRP Canopy – 2 no. FRP Deer Figure on canopy – 2 no. FRP Fancy Railing Frog & Monkey Shape – 4 no. FRP Walking Bridge 7.5’ Long – 1 no. M.S Spring Climber – 1 no. M.S Zig-Zag Climber – 1 no M.S Chain Net Climber – 1 no M.S Climbing Ladder – 1 no M.S Station in which vertical G.I pipe is of jindal make 3” x12G of I.S.I Mark – 2 no. The pipes used should be G.I of Jindal make in all the equipments. The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect.

Providing and laying 3/4"dia G.I pipe line.

Providing Bottle palm of plants ht. 270-300 cm bottom girth 40-50 cm well developed in big HDPE bags

Providing Cassia fistula (Amaltash) of plants height 120-135 in big poly bags of plants size 25 cm girth 2"-3"

Providing Mimusops elengi Maulsri of plants height 180-195 cm well developed with thick stem in big in big size HDPE bag 2"-3"

Providing and stacking Azadirachta indica (Neem) of plants height 120-130 cm in big polybag of plants size 25 cm.

Analysis for providing and fixing Grill size of hollow pipe 40 x40 mm in M.S pipe as per design approved by Engineer in charge depending upon Site Requirement

Arm and Shoulder Wheel:- Providing, and fixing Arm and Shoulder Wheel of size 130 X '1200 X 1350 mm make of Green Gym or Equivalent fabricated with main post of 140 mm dia and 3.0 mm thick rest of the G.I pipes are 40mm dia and 2.5 mm thick all G.I pipes made up of hot roiled tubular steel and hot dipped galvanized, and powder coated using Akzo Nobel c equivalent of 80-120 micron thick. All welding joints of G.I pipes are robotic welded with joints scalloped as necessary an dressed off removing sharp edges and burrs. Zinc prime paint to be applied at all welding points prior to finish ink Padals shall be made up of Nylon alloy with rounded edge of prevent any impact of injury and seat to be made from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic 4.00mm, colourful and resistant environmental friendly. Bearing used shall be maintenance free , duly oiled sealed and self lubricated made by reputed company like SKF to be approved by Officer -in-Charge Equipment to be fitted within built limiters to prevent unwanted movements. All open ends of G.I pipe to be coloured by GI/LLDPE caps for user safety. The equipment to be fixed on ground with concrete of minimum strength M2: nd J shaped welded bolts and once the concrete is set, ft ;he equipment on to it and cover nuts and bolts with the base Mate cover, all complete as per direction and approval of -2,engineer-in-Charge regarding material, shape of equipment colour on metal, seat and base cover plate and fixing of equipment etc. The rates are inclusive of all taxes like GST, Transportation, Installation in CC with 2 years defect liability period free of cost to full satisfaction of engineer in charge complete in all respect.

Dips/ Chin Up/ Push Ups ( 3 in One Machine ) :- 1. Dimensions (LxWxH) 1400 x 1200 x 2100mm. 2. Fabricated with main post of NB 50mm (G.I) 'C' Class pipe of approved make. 3. Main frame of NB 50mm (G.I) 'C' Class Pipe. 4. Leg support of NB 32mm (G.I) 'C' Class Pipe and other support of NB 25mm (G.I) 'C' Class Pipe. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters). 5. All pipes are powder coated using akzo Nobel or equivalent paints of 80-120 micron thick . 6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs. 7. Zinc primer paints is applied at all the welding points prior to finishing. 8. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness. 9. Once the concrete is set, the equipment is fixed on to it . 10. High tensile steel with galvanized nut bolts are used for assembly. 11. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment. 12. Self-explanatory stainless stell lable fixed on equipment for ease of use. The rates are inclusive of all taxes like GST, Transportation, Installation at site complete in all respect to full satisfaction of engineer in charge complete in all respect.

Duranta repens 1'-3'

Plumeria Alba 5'-6' ht well grown

Providing an fixing of Gate valve for Hydrant connection.

Providing and fixing 3/4"dia Hydrant connection

providing and fixing of granite stone 18mm to 20mm as per specification

Providing and fixing of SS gate 304 Grade

Providing and Fixing Public Information Board consisting of 75mm G.I pipe of size 2.45 m * 1.15 m with 900 mm * 900 mm G.I sheet of 16 gauge connected/welded with 5mm thick steel plate of duly painted as per column mention in drawing and fixing at site in 60*60*75 cms cement concrete in 1:2:4 block complete in all respect.

Providing Topiary plant Casuarina plant fresh & healthy having 5 to 6 specific shape and size ball well developed 195 to 210 cm ht. plant in 40 cm cement pot

Texmo Motor

Wave Slide: 9’.5 L x 5’H. Wave slide is of molded Fiberglass Reinforced Plastic (FRP) of 6mm thick and climbing ladder is of G.I pipe jindal make 1” x 12 gauge & G.I rectangular pipe 65 x 25 mm box X 16 gauge as climbing steps which support with 1”.25 sq. pipe x 14 Guage with suitable PU Primer & PU Paints. Complete item with GST, Transportation, Installation with C.C & labor at site including defect liability period of 2 year free of cost complete in all aspect.

Providing and Installation of fountain of material IP302 having the dia of 8 feet with SS nozzles, pipeline, wire, control pane, wiring , laser waterproof lightening includes with all complete work as per Engineer in charge.

Providing Ficus starlight 7'-8' ht. 25"x25" polybag

Providing Golden Bottle push Topairy well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht. in 40 cm cement pot

Supply and Plantation of Shrub plants Chandni variegated

Supply and stacking of plant Ficus panda of height 45-60 cm with 6-7 branches and healthy foliage in p. bag of size 25 cm.

Supply and stacking of plants Tecomagaudichaudi 2'ht, 8''polybag, spread1' well grown

Providing and stacking Ficus Benjamina 7'-8' ht. 25"x25" polybag

Providing Delonix regia (Gulmohar) plants height 150-165 cm in big poly bags of plants size 25 cm girth 2"-3"

Seated chest press: Providing designing and fixing of seated chest press in a pair of size 1800 x 700 x2000 mm fabricated with main post of 114mm dia and 2.5mm thick and rest of the pipes 40mm dia and 2.5 mm thick. All pipes made up of hot rolled tubular steel and hot dipped galvanized and powder coated using Akzo Nobel or equivalent of 80-120 micron thick. All joints of pipe are robotic welded with joints scalloped as necessary and dressed off removing sharp edges and burrs. Zinc primer paint to be applied at all welding points prior to finishing. Handle bars are to be provided with high quality grip rubber. Pedals shall be made up of Nylon alloy with rounded edges to prevent any impact or injury. Seats and base plate cover to be made up from virgin LLDPE manufactured by rotational moulding with minimum thickness of plastic as 3mm colorful and UV resistant and environmental friendly. Bearing used shall be maintenance free, duly oil sealed and self lubricated made by reputed company to be approved by Engineer in charge. Equipment to be fitted with inbuilt limiters to prevent unwanted movement. All open ends of pipe to be closed by GI/ LLDPE caps for user safety. The equipment to be fixed on ground with concrete or minimum strength M-25 and J shape welded bolt and once the concrete is set, fix the equipments on to it and cover with the base plate. All complete as per direction and approval of engineer in charge regarding material shape of equipment colour on metal seat and base plate and fixing of equipments etc The rates are inclusive of all taxes like GST, Transportation, Installation in CC with defect liability period of 2 years free of cost to full satisfaction of engineer in charge complete in all respect.

Supply and Plantation of Shrub plants Hamelia

Supply and stacking of plants Rose desi multibranch 2' ht. polybag 10"x12"

Supply of Jamuna sand

SUPPLY OF PRECAST CONCRETE RCC BENCHES HAND REST OF SIZE 1500MM MANUFACTURED BY M-30 GRADE OF CONCRETE. CONCRETEPLANKS IN RED COLOUR SIZE MMX400MMX50MM AND 1NO.OF CONCRETE PLANK IN RED COLOUR SIZE 1500MMX 425MMX50MM.EACH BENCH CONSIST OF 2 NO.L SHAPE BASE FOR IN GREY CEMENT COLOUR THICKNESS 80MM BACK HEIGHT 890MM FRONT HEIGHT 450MM SITTING LENGTH OF BENCH 1500MM SITTING HEIGHT 450MM TOTAL HEIGHT 890MM. The rates are inclusive of all cost and taxes like transportation cost, installation cost and GST complete in all respect.

Supply of RH Pipe 1" dia.

Twister with Stair Stepper:- 1. Dimensions (LxWxH) 1100 x 800 x 1400mm.2. Fabricated with main post of NB 100mm (G.I) 'C' Class pipe of approved make. (NB stands for nominal bore i.e. internal diameter of pipe in millimeters).3. Twister main frame of MS Pipe 50x 50mm and Handle frame of NB 32mm & 25mm (G.I) 'C' Class pipe.4. Stepper main frame of MS Pipe 96x 46mm and Handle frame of NB 32mm & 25mm (G.I) 'C' Class pipe. 5. All pipes are powder coated with 80-120 micron thick akzo Nobel or equivalent paints.6. All joint of pipe are robotic welded with joints scalloped as necessary and dressed of removing sharp edges and burrs.7. Zinc primer paints is applied at all the welding points prior to finishing.8. Foothold made of Co-Polymer Plastic with rounded edges to prevent impect and injury.9. Maintenance free bearings of SKF or equilvalent make duly oil sealed and self-lubricated are used in the equipment manufactured.10. The equipment is fixed on ground with concrete of minimum strength M-25 and J shaped welded bolts of 18mm thickness.11. Once the concrete is set, the equipment is fixed on to it.12. High tensile stell with glavanized nut bolts are used for assembly.13. Equipment made to GS mark, EN16630, DIN 79000 & ISO 14001 international standard for outdoor fitness equipment.14. Self-explanatory stainless stell lable fixed on equipment for ease of use.15. The equipment are fitted with inbuilt limitters to prevent unwanted movements.The rates are inclusive of all taxes like GST, Transportation, Installation at site complete in all respect to full satisfaction of engineer in charge complete in all respect.

Vermi Compost Khad ( 50 Kg bag)

Bidder Name

Amount

M/s Sami Greenmax Landscape Pvt. Ltd.(GSTN-06AAPCS4484A1Z9)

Fortune Enterprises(GSTN-NA)

Big Brother Traders(GSTN-NA)

M/s Sami Greenmax Landscape Pvt. Ltd.

Big Brother Traders

M/s Sami Greenmax Landscape Pvt. Ltd.

Big Brother Traders