Iyothee Thass Pandithar Scheme 2024 2025 improvement of burial ground at ward 4 AD burial ground in C.Pudupatti Town Panchayat

Amount

Earth work excavation in all soils and sub soils exceipt hard rock requiring blasting with intial lead and lift including re-filling the sides of foundation in layers of 15cm thick watering, ramming, depositing the surplus earth in the premises as directed by departmental officers etc., complete asper standard specification. as per SS 20 B TNDSS NO: 23 & 24 VI (s2), VII 9,10

Plain Cement concrete Using 1:4:8 mix (one cement, Four sand Eight aggregates) using 40mm ISS gauge HBG metal including cost and conveyance of all materials to work site and all labour charges for mixing, laying, consolidating and curing etc., complete as per standard specification. TNDSS NO: 28 V, VI (S2) V, VI (S5A) VII

Supply and fabrication and placing in position of TMTsteel roads to required size and length as directed by the departamental officers including cost of binding wire, cutting, bending and tying etc., inclduing cost and conveyance of all materials to side and all labour charges etc., complete as per standard specification TNDSS NO: 97 V.VI (S6) VII (S^) VII-3

Supplying and erecting Centering for sides and soffits including supports and strutting upto 3 M height for plain surfaces such as RCC Slab. Rectangular beams,. Tee Beam (or) L Beams Lintel,.Bed Block, Slabs landing slabs square or round column etc., as detalied below with all cross bracings using M.S.Sheets of size 90 cm x 60 cm and BG 10 stiffened with welded M.S.Angles of size 25x225x3 mm for boarding laid over silver oak or countrey wood joists of 10cm to 13cm dia spaced at an intervals of 75 cm c/c etc., complete complying with standard spefication as directed by departamental officers TNDSS NO: 30& 86 Square column

Circular surface

Curved Surface

Plain Surface

Grade Beem

Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone Sand (M- Sand), but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers -

Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9" X 43/8"X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with Cement mortar 1:5 (one cement five sand) mix 12mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing laying and curing etc complete complying with std specification TNDSS No: 56 & 57

Plastering with Cement mortar 1:3 (one cement three sand) mix 10mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing laying and curing etc complete complying with std specification TNDSS No: 56 & 57

Supply, fabrication and fixing of MS door using MS angle and sheet of approved quality with one coat of red oxide primer including cost and conveyance of all materials and labour charges to site etc., and complete

Painting with Two Coats with Weather sealed Exterior emulsion Paint as instructed by the departmrntal officers including Preparation of surface curing, etc complete in all floorscomplying with standard specification. ( The Colour and shade of the paint shall be got approved by the departmental officers.)

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer 61 V, VI (S4) 3

Drilling of 150 mm dia Bore well in hard rock area to any required depth as decided by the Departmental officers including Transportation from one place to anothr place with in Tamilnadu State by direct method using contractor's rig tools at the site shown by the Departmental Officers including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification

Supply and erection of 150 mm CS dia PVC Casing Pipe of approved quality to require depth including cost and conveyance of all materials and labour charges and other incidental charges to site etc., complete. as per standard specification

Supply and delivery of 1.5HP Single phase Submergeble Pumpset as per Is 8034 with out Panal Board including all labour charges etc (20 Lpm x 125mHead) ( TWAD SSRB S.No - 84

Supply and delivery of 1.5HP Single phase Panal Board With two level gurd and Auto Start including all labour charges etc Complete ( TWAD SSRB S.No - 101)

Supply and Delivery and fixing ofHDPE tank of as per IS1 12701/1996 inculding,unloading,transportation and labour charges for fixing of the GI pipes and Specials for Pipe connection works Inculding cutting,threading and Fixing charges etc., Complete 2000 litre HDPE Tank

Supply and delivery of pipes and pipes specials including all charges etc.,Complete 32mm HDPE Hose

32mm CPVC lbow

32mm GM Gatevalue

MS Bore Cover

MS Clamp Set

2.5 Sqmm 3 core Flat cable

Woodern Board 0.60x0.45

16ams DPIC Main

20mm CPVC Pipe

20mm CPVC ElBow

20mm Waste Not Tap

Nylon Rope for borewell

32 mm NR Valve

Laboar charges for the erection of submersible pumpset in Borewell including fixing jointing submersible cable with proper clamps up to starter to required depth ande also fixing of riser pipes to the recquired depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, voltmeter, Ammeter, Three pilot (indicating) lamps capacitor single phasing preventor,Water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days

Geo Physical Survey Report for conducting water level testing (Minimum 3 Location)

Finishing the top of roof with one course of Decorativepressed tiles of 12mm of required size approved quality laid in cement mortar 1:3, 20mm thick (One cement and three sand) mixed with water proofing compound powder 2% by weight of cement usedand flush pointing the joints with the same mortar etc. complete complying with standard specification.

Finishing the top of the flooring with ceramic tiles (300x300x6mm) of best quality and colour approved by the departmental officers laying in cement mortar 1:3 (one cement and three sand) mix, 20mm thick including pointing the joints with white cement neatly in all floors etc. complete complying with standard specification

Dadooing the walls with glazed tiles of 30 c.m x 20 c.m 6mm size laid in cement mortor 1:2 mix 10mm thick and pointing with 0.40 kg white cement per m2 etc.

Plain Cement Concrete 1:2:4 mix (One Cement, Two Fine Aggregate and Four Coarse Aggregate) Using 20mm ISS HBG Metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Plain Cement Concrete 1:1/2:3 mix (One Cement, One and Half Fine Aggregate and Three Coarse Aggregate) Using 20mm ISS HBG metal for foundation and basement including dewatering if found necessary and laid in layer of not more than 15cm thick and consolidated including all cost conveyance of materials and labour charges etc. complete as per standard specifications and as directed by departmental Engineers(TNBP No.28).

Supply and fixing of 12mm thick bitumen bad 8 cm height imcluding all charges ext.

6 Metre Length Single Bracket Pole with Base Plate (250 x 250 x 6mm) 76.10mm OD x 3.65mm Thick x 6000mm Length Length in control box with foundation hardwares. etc complete as per standard specification. As per PWD SOR Page No : Data (13 xv ) 1.(a)

Supply and Fixing of 30 W LED Street Light Fittings as per PWD SOR P.No.69 etc complete as per standard specification. As per TWAD SOR Electrical items Sl.No : 17 a

Supply and laying of 2 x 16 sq.mm PVC armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre putting 0.15 mt. Layer of sand and covering the cable completely with bricks and sand and refilling the earth to make good.Ele. Data 2021-22 S

R SABEER ALI (BID ID -1120147)