Improvement and development of EI and Compound Lighting in building of MCW centre and Ayurvedic panchkarma Hospital(SDMC) at Kalu sarai hauz khas in Ward 62S under South Zone

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.Group C

Rewiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductorsingle core cable and 1.5 sq.mm FRLS PVC insulated copperconductor single core cable as earth wire in existing surface/recessed steel/PVC conduit including dismantling as required. Group C

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.3 x 2.5 sq. mm

3 x 4 sq. mm

3 x 6 sq. Mm

Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required.

Supply,Installation,testing and commissioning of 1200mm sweep BEE 5star rated,ceiling fan with brush less Direct current(BLDC) Motor,class of insulation:B,3 nos blades,30cm Long down rod,2 nos canopies,shackle kit,safety rope,copper winding,power factor not less 0.9,service value(CMM/W) minimum 6.85,air delivery minimum 215CMM,350 RPM(tolerance as per IS:374-2019),THD less than 10%,remotte or electronic regulator unit for speed control and all remaining accessories including,safety pin,nut bolts,washers,temperature rise=75 degree C(Max),insulation resistance more than 2 mega Ohm,suitable for 230V,50Hz,Single phase Ac supply,earthing etc.complete as required

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supply of 12" (300mm) sweep 1400 rpm exhaust fan heavy duty complete with shutters, blades etc as reqd.

Installation of exhaust fan in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.Upto 450 mm sweep

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) Single Pole

Supplying and fixing following rating, double pole, 240 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.(a) 63 A

Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required.100 A, 16 kA,TPMCCB

200KA,16KATPMCCB

125 KA,16KA,TPMCCB

Supply of LED tube type luminaire 20 Watt rating complete with extruded Aluminium Batten prewired with high efficient LEDs with the following. A) Total system wattage 20 watt +/- 5 % b) Luminous efficacy lumens /watt = 95 c) Power factor = .95

Supply of XLPE insulated PVC sheathed Al.conductor Armoured cable 1.1KV grade confirming to IS-7098 of following Size(d) 2x16 sqmm

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on wall surface as required. 7.7.1 Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)(a) 16 way, Double Door

(b) 8 way,double door

(c) 6 way,double door

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.5/6 A switch

15/16 A switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.6 Module (200mmX75mm)

S/I/T/C of LED tube type luminaire 20 Watt rating complete with extruded Aluminium Batten prewired with high efficient LEDs with the following A) Total system wattage 20 watt +/- 5% B) Luminous efficacy lumens /watt =95 C) Power factor =.95.

Supply of LED tubelight Lamp T-5/T-8 20 watt rating made up of High Efficent LEDs with the follwoing specifications:(a) Total system wattage 20Watt +/- 5% (b) Luminious Efficacy lumens/Watt>=95 (c) Power factor>=.95

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.8 Module (125mmX125mm)

SITC of 100W LED flood light luminarie fitted with lens,made of pressure die cast aluminium housing & tougheneed glass cover complete with the following specification as reqd with IP 66 protection (a) Total system wattage =18/20 watt +/-5% (b) Luminarieefficacy>=100lm/w (c)Power factor>=.95(d) Protection class-IP-66

Shivam Enterprises

GURUNANAK ENTERPRISES

Gautam Electrical

AMIT ELEVATOR SERVICES