ADDN/ ALTN TO BLDG NO. P-192 AND OFFICERS GARAGES (MD ACCN) AT AF STN PALAM, DELHI CANTT-10

Amount

Demolition of cement concrete (un reinforced) in ground floors and pavings n. exc 15 cm thickness (below or above ground level) complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding and removing debris off the premises complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition) n. exc 15 cm thickness for landing, cooking platform and chajjas complete all as specified and directed.

Taking down cement plaster on brick or concrete wall surfaces etc including raking out joints, hacking for key , scrubbing down with water etc complete all as specified and directed.

Demolition of brick work or stone boulder masonry built in cement mortar of any description complete all as specified and directed.

Material and labour for Brick work with sub class B works, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete complete all specified and directed.

Material and labour for 15 mm thick cement plaster on fair faces of brick work or concrete surfaces in cement mortar 1:6, to be finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for rendering 15mm thick in CM 1:4 on brick/ concrete surfaces of walls finished even and fair complete all as specified and directed by Engineer-in-Charge

Material and labour for RCC in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings and pillars upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, as directed type B1 (1:2:4) using 20 mm graded stone aggregate including necessary form work complete all as specified and directed.

Material and labour for 100 mm thick PCC 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in floor etc complete all as specified and directed.

Material and labour for cement concrete 1: 2 :4 type B-0 (using 12.5mm graded stone aggregate) 25mm thick in sub base floor etc complete all as specified and directed.

Material and labour Glazed ceramic coloured tiles in vertical surface 450x 350x 7mm /350x250x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1: 4 as on vertical surfaces such as skirting, dados, etc complete all as specified and directed.

Material and labour for vitrified tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:6 complete all as specified and directed.

All as per item No 13.00 here-in-before above but in vertical surface of wall, skirting over and including 10 mm thick rendering of CM 1: 4 as on vertical surfaces such as skirting, dados, etc complete all as specified and directed.

Material and labour for form work to side and soffits of shelves, lintel bend, column, footing or cooking platform for rough finished surface of concrete complete all as specified and directed.

Material and labour for Reinforced cement concrete 1:2:4 type B1 using ( 20mm graded aggregate) as in slabs supported on walls, beams, lintel bend, footing and columns in floors, roofs, landings balconies, cooking platform, canopies, deck slabs and in shelves and the like complete all as specified and directed.

Material and labour for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

All as per item No 17.00 here-in-before but 5 mm dia and over upto and including 10 mm dia in stirrups and spacers binders etc complete in all as specified and directed.

Taking down Chowkats or frames with shutters not exceeding 1.5 Sqm each (Without taking off shutters from the frames) complete all as specified and directed.

Taking down Chowkats or frames with shutters exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified and directed.

Supply and fixing for Powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc complete all as specified and directed.

Supply and fixing of power coated aluminium window and ventilator shutters side hinges, aluminium section weighing 0.55 kg/m including necessary joining cleats,gauge/ glazing cips rubber packing anodised aluminium snap beading screws anodised aluminium fittings complete all as specified and directed.

Supply and fixing aluminium powder coated three track sliding window with mosquito net two track for glass leaf sliding and one track for mesh leaf sliding outer frame weighing 0.699 Kg/m,101x32 mm size equvalent Jindal model 20671, shutter plain of size 37.5x15mm weighing 0.366 Kg/m, Section No 20690 Jindal), with powder coating of min thickness 50 micron with one or more rebates, sliding type without sash bars, 5mm thickness double tampered clear glass , rubber packing, snap beading screws,with horizontal sliding type with stainless steel mesh, frame, complete etc complete all as specified and directed.

Supply and fixing anodised aluminium powder coated door shutter, aluminium section wt 0.55 Kg/m including neccesary joining cleats, glazing clips,rubber neoprene packing, 150mm handle 2 nos in each door, hinges, anodised aluminium snap beading screw etc complete all as specified and directed.

Supply and fixing 12mm thick toughned glass door shutter complete, including neccesary joining cleats, glazing clips, 200mm handle 2 nos in each door, complete all as specified and directed.

Material and labour for preparing New plastered surfaces and applying two coat of oil bound distemper over one coat of primer over 2mm thick (avg thickness) wall care putty complete all as specified and directed.

Material and labour for preparation of newly plastered surfaces of walls and applying two coats of exterior emulsion paint over one coat of primer over 2mm thick (avg thickness) wall care putty complete all as specified and directed.

Material and labour for complete removal of existing treatment of old decorated external surface of walls by electrically operated grinder including necessary scaffolding complete and applying two coats of exterior emulsion paint over a coat of primer of same brand over 2mm thick (avg thickness) wall care putty to obtain even and smooth surfaces including preparation of surfaces complete all as specified and directed.

Material and labour for complete removal of existing treatment of old plastered surfaces on walls including brooming down or steel wire brushing, scraping down and applying two coats of distemper oil emulsion over one coat of alkali resistant primer complete all as specified and directed.

Material and labour for two coats of synthetic enamel paint over a coat of red oxide primer on new steel surface of any description over 10cm width or girth including preparation complete all as specified and directed.

Demolition and breaking up drain pipe 75/100mm dia (Salt glazed ware, AC or PVC) of any type complete all as specified and directed.

Supply and fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls including suitable clamps after every one meter of interval complete all as specified and directed.

Supply and fixing in repairs PVC(SWR) bends any radius, 110 mm bore complete all as specified and directed.

Dismantaling water tank and removal from site exc 250 ltr and n exc 500 ltr complete all as specified and directed.

Material and labour for 1000 litres capacity rotational moulded polythylene water storage tank (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

Supply and fixing in repair brass ball valves, 20 mm bore, high pressure with polythylene float and fly nut screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.

Supply and fixing for gun metal globe or gate valves, 20 mm bore, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Supply and fixing steel work in tubular/square/rectangular hollow section/angle iron, tee etc. for trusses/ purlins & rafter including special shaped washer etc. complete using ERW or induction butt welded tubes using Fe as per IS 4923, Grade YST 310 including necessary machinery for upto 10m height structure complete in all respect as specified and directed.

Dismantling AC/CGI corrugated steel sheeting any gauge thickness including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-charge.

Supply and fixing 0.50mm thick Pre-painted galvalume aluminium Zinc coating steel GI based corrugated sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall , fixed with self taping screws complete all as specified and directed.

Material and labour Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in valley guter,roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

Surface excavation n.exc (not exceeding) 45 cm deep and averaging 30cm deep and getting out soft/ loose soil and removing excavated material out from MOD land complete all as specified and directed.

Dismantling of wall and ceiling board/blanket/ plywood/slab, any thickness including cover fillets complete all as specified and directed.

Supply and fixing of 12mm thick Gypsum board suspended Ceiling system of any shape and size with ISI grade GI framing of intermediate channel 15X45X15X0.9mm, perimeter channel and ceiling angle 25X10mm section with connecting clip 2.64mm dia including all hardware i.e sofit cleat,rawl plug,edge bead,angle bead,nut &bolt drywall screws, hangers etc with all hanging accessories, cut out to made for lighting, fixture and AC grills, including POP/ putty and two coat of oil bound distemper complete all as specified and directed.

Kunal Construction Co. (BID ID -3397899)