NIT No. 08(2024-25) Item no.6

Excavationforfoundation and building of pit for pump set installation of size 6X2.5X3 cube feets and making brick boundry wall with proper CC materials and plaster work.

S/O horizontal Monoblock pumpset with 7.5 HP capable of giving discharge 20-25 LPS at 12-24 meter head . Make: Kirloskar/ / M&P/ DJB approved make. ( kirloskar or equivalent in M&P/ DJB approved make).

Fabrication of MS Base Frame made from MS Channel size 150mm x 75mm & cross support and also fixing with MS vertical support U channel and 6nos drilling for foundation bolt as per existing site required. Size: 1.0 M X 0.50 M or as per site requirement.

S/O nuts bolts and washers of required size

S/O neoprene packing

S/O 6” inch MS bend long size, make (Jindal /tata/djb approved)

S/O 4” inch MS bend long size, make (Jindal /tata/djb approved)

S/o MS pipe of 100mm diaas .make (Jindal /tata/djb approved)

S/O MS pipe of 150mm dia . make (Jindal /tata/djb approved)

S/o MS flange of 6” size./ 150 mm ,make (Jindal /tata/djb approved)

S/o MS flange of 4” size./ 100 mm, make (Jindal /tata/djb approved)

S/O C.I. DF non rising with SS spindle sluice valve PN 1.0/ IS 14846 C.I. body/ Wedge / bronze ring / SS / 410 shaft construction of 150mm dia. Make: kirloskar/ IVC, djb approved)

S/O C.I. DF non return valve PN 1.6 IS 5312 Part 1. Body cover- C.I. IS: 210, Gr. FG260 Door- CI IS:210, Gr. F260 Body ring- bronze IS: 318 Gr. LTB2 of 150 mm dia. Make: Kirloskar / IVC ,djb approved)

Making of RCC foundation of the monoblock pump set by cutting the floor level of the pump house up to suitable depth and refilling it with the help of RCC mixture up to suitable height of the suction line including the cost of plastering of newly made foundation and SS foundation bolts of 300 mm length X 25 mm dia etc as required Size of foundation: 1.0 m X 0.50 m X 0.2 m , TMT Bar of 12 mm ( 150 Kg/Cum)

Providing and painting of the suction delivery lines, CI valves, specials, MS Base Frame with good quality enamel paint after two coats of red oxide primer.

S/O of PVC insulated 4X3 sq.mm unarmored cupper power cable . Make: Grandly/Gloster/DJB approved makes.

s/o and installation of DOLstar delta starter for 7.5 hp monoblock pump set. Make- djb approved)

Cutting ,welding and fabrication of pipes flanges etc work as per site requirements .

Installation and fixing of the pump and motor on the base frame including couple the pump and motor jointing the pump with suction/ delivery line with proper alignment. the job also include fixing of Valves , laying of cable and making thimbling of cable on both ends by 50sq. mm 6 Nos thimbles, making connection the motor from starter/panel etc i/c watch and ward, cartage , loading and unloading taking all safety precaution arrangement, all tools and tackles the work including testing and commissioning all E&M equipment i/c pump and motor at no load and full load in the presence of Engineer In Charge .

Goodwill Enterprises

MOHAN ENTERPRISES

HYDROCON ENGINEERS

Devraj Enterprises