Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.6 LAccepted-AOC AT BRAJARAJPUR PO INS CHILKA DISTT KHURDHA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹29.9 L+₹1.5 L (5.37%)Rejected-Finance AT AMRITPUR PO NB CHILKA VIA BALUGAON DIST KHURDA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L2 | Rejected-Finance Being not lowest | |
| 3 | L3₹30.3 L+₹1.9 L (6.65%)Rejected-Finance AT AKHUPOKHARA PO INS CHILKA DISTT KHURDHA ODISHA 752037 | KHORDHA | ODISHA | 752037 | L3 | Rejected-Finance Being not lowest |
Tender Value
Refer Docs
EMD Value
₹52,000
Closing Date
3 Oct 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Garrison Engineer Chilka
Garrison Engineer Chilka PO INS Chilka Distt Khordha Odisha 752037
ADDITION/ALTERATION TO TOILETS AND BATHROOM INCLUDING PROVN OF GEYSER AT AZAD DIVN BLDG NO P-293 AT INS CHILKA UNDER GE CHILKA
2022_MES_547068_1
GE/CHL/8806 OF 2022-23
Open Tender
Civil Works
Item Rate
182 days
Garrison Engineer Chilka
MES Enlisted Contractor of Class D category a i
7 documents required · 7 mandatory
₹500
Yes
Garrison Engineer Chilka
₹52,000
Yes
31 Oct 2022
23 Aug 2022
10 Oct 2022
23 Aug 2022
3 Oct 2022
7 Sept 2022
23 Aug 2022 - 30 Aug 2022
Amount
Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
Taking down chowkhats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each with shutters (without taking off shutters from the frames) and refixing in same opening complete all as specified and as directed.
Taking down chowkhats or frames not exceeding 1.5 Sqm each with shutters (without taking off shutters from the frames) complete all as specified and as directed.
S&F 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F 125 mm long extruded aluminium alloy handle, fabricated type anodised complete all as specified and as directed.
S&F 250 mm long, aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded section including fixing blots and sliding bolts of extruded section or cast aluminium alloy complete all as specified and as directed.
S&F 150 mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and as directed.
S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm single side prelam PVC Sheet & edges will be painted to match with prelam sheet reinforced with M.S Square tube, in opening as per specification & drawing complete all as specified and as directed.
S&F Factory made solid panel PVC door shutter 30 mm thick style considering of frame made out of mild steel tubes for top and bottom rails, mild steel frame shall be covered with heat moulded both side Prelam PVC sheet used PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement suppling & fixing in the frame at site as per specification and as shown on drawing complete all as specified and as directed.
S&F powder coated (minimum thickness of powder coating 50 micron) anodised aluminium frame for doors, windows ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and as directed.
S&F anodised powder coated of any colour (thickness of powder coating not less than 50 micron) aluminium window/ventilator shutters, side hung type without sash bars , aluminium sections minimum weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber paking , anodised aluminium snap beading screws, anodised aluminium fittings such as peg stays 150 mm long (1 No) in skelton shutter, stainless steel butt hinges type B-21 75 mm long (02 Nos) ,friction hinges 300mm (01 pair) in glazed shutter suitable handle 1No and 100 mm size powder coated aluminium tower bolt (02 Nos) with aluminium flat and screws complete all as specified and directed Note :- Glass or wire cloth shall be measured and paid seperately under respective item as considered therein.
Supply only 4.8 mm thick frosted sheet glass ,ordinary quality, in square exceeding 0.5 Sqm each pane fixed to aluminium joinery complete all as specified and as directed.
S&F Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples and fixed to joinery complete all as specified and as directed.
S&F for anodised powder coated of any colour (thickness of powder coated not less than 50 micron) aluminium grill of make "Deco grill" and DG-202 model with aperature size 60mmx45mm fixed with suitable channel complete all as specified as directed.
Dismantling of floor, health or wall tiling including cement mortar bedding (but not backing) removing rubbish off the premises complete all as specified and as directed.
M&L Non - skid ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.
M&L for Glazed ceramic coloured tiles in vertical surface of size 300mmx200mmx7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match with including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.
S&F in repair 15 mm bore dia angle valve chromium plated ,fancy type, screwed down high pressure screwed at the ends for iron pipe or union with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed Make :- Parryware cat No G5307A1 or equivalent as approved.
S&F in repair 15 mm bore dia 2 way bib cock double handle with flange, chromium plated fancy type screwed down for iron pipe complete all as specified and as directed. Make:- Prayag Cat No 6612 or equivalent as approved.
M&L for water proofing treatment to sunken surface complete all as specified and as directed with the followings specification:- (i) 15 mm thick rendering in cement mortar 1:3 mixed with and including water proofing compound @3% by weight of cement (ii) Applying evenly a coat of bituminous primer @ 0.5 liter per sqm (iii) Applying evenly a tack coat of industrial Bitumen 85/25 at the rate of 1.2 Kg per sqm over the prepared surfaces. (iv) Apply APP modified polymeric membrane of weight not less than 3.0 Kg/sqm laid and bonded to the sub strata by heat process, over laps of 100mm shall be sealed/fused by flame torch application as per manufacturer instructions.
M&L PCC 1:5:10 type E-2 using 40 mm graded stone aggregate as in mass concrete as in sunken filling complete all as specified and as directed.
Demolition of brick or stone masonary work built in cement mortar including all quoins , arches, pillars etc complete all as specified and as directed.
M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.
M&L brickwork with fly ash bricks, straight or curved on plan to any radius as in half brick thick walls built in cement mortar 1:4 complete all as specified and as directed.
M&L 25 mm thick pre-formed filler (bituminous pad) for crumple/expansion joints with joints sealing compound grade 'A' (normal) including removing existing unserviceable fillar board complete all as specified and as directed.
S&F in repair 0.56 mm thick plain aluminium sheeting Alloy 31000 H4 in stepped flashing (measured as the minimum rectangle from which the places can be cut) complete all as specified and as directed.
Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc, including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bend any radius complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) soil, waste and vent pipes single socketed in any length with adhesive joints, fixed to walls complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) bend any radius complete all as specified and as directed.
S&F in repair 75 mm diameter of outlet PVC (SWR) floor trap with grating including jointing with solvent cement complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) bend with access door complete all as specified & directed.
S&F 75 mm bore PVC (SWR) bend with access door complete all as specified & directed.
S&F 110 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.
S&F 110 mm bore PVC (SWR) vent cowl complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) vent cowl complete all as specified and directed
S&F 75 mm bore PVC (SWR) junction single, (single T) equal or unequal complete all as specified and as directed.
S&F 75 mm bore PVC (SWR) junction single, (single T) equal or unequal with access door complete all as specified and as directed.
Demolition of cement concrete of any description and in any position not otherwise specfically provided for and disposal of unserviceable material to a distance not exceeding 100 M complete all as specified and as directed.
S&F in repair Vitreous china wash down water closet pan, semi-pedestal pattern (Anglo-Indian type) including fixing bolts (excluding flushing cistern and flush pipe) including necessary connection to trap and flushing pipe complete all as specified and directed.
S&F in repair 110 mm bore of PVC (SWR) 'P' trap complete all as specified and as directed.
S&F in repair PVC low level flushing cistern of 10 litre capacity fixed including syphonic action type,ball valve, float and handle including brackets etc complete all as specified and as directed.
S&F in repair 32 mm dia bore, 800 mm long corrugated PVC waste pipe with cup head for wash hand basin complete all as specified and as directed Make :- Prayag Cat Part No 327 or equivalent as approved.
S&F in repair waste coupling of PTMT suitable for 32mm bore dia pipe , half or full threaded (minimum weight 45 gms) complete all as specified and as directed.
S&F PVC soap tray fixed to the wall with screw complete all as specified and as directed. Make : Prayag Cat No 195 or as approved
S&F in repair 15mm bore dia, Bib taps chromium plated , fancy type screwed down for iron pipe and fixed complete all as specified and directed. .
S&F in repair Brass chromium plated tubular towel rail, 20mm dia , D type, 600mm long complete all as specified and directed.
S&F in repair 15 mm bore dia stop valves ,fancy type , chromium plated with long shank and cup (concealed type) , with crutch or butterfly handle,screwed both ends for iron pipe or for unions and fixed complete all as specified and as directed.
S&F in repair PVC connections 15mm size with PTMT nuts and washers of length 600mm complete all as specified and as directed.
Taking up or down 15 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.
Taking up or down 25 mm bore steel tubing and connections, including cleaning for re-fixing or removal from site complete all as specified and as directed.
S&F 15 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.
S&F 25 mm bore galvanised iron tubes, 'medium grade' with all fittings such as bends, elbow. reducer, socket etc and fixed complete to walls and ceilings or laid in floor complete all as specified and as directed.
Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring, etc and making good, cutting not exceeding 10 cm girth in brick walls complete all as specified and as directed.
M&L 50 mm thick cement concrete 1:2:4 type B-1, using 20mm graded stone aggregate as in floooring , surface finished even and smooth using extra cement complete all as specified and as directed.
Taking down cement plaster on brick or stone wall or on concrete surfaces including racking out joints, hacking for key, scrubbing down with water complete all as specified and as directed.
M&L 10 mm thick rendering on brickwork or concrete surfaces of wall in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.
M&L 5 mm thick rendering in cement mortar 1:3 on ceiling , surface finished even and fair complete all as specified and as directed.
M&L for applying two coats of oil bound distemper over a coat of alkali resistant primer over 1 mm thick wall care putty including preperation of newly plastered surfaces of wall complete all as specified and as directed.
M&L applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.
M&L applying three coat of white wash on ceiling including preparation of newly plastered surfaces of ceiling complete all as specified and as directed.
M&L for applying two coat of white wash on ceiling including preparation of old decorated plastered surfaces of ceiling complete all as specified and as directed.
M&L for applying two coat of white wash on walls including preparation of old decorated plastered surfaces of wall complete all as specified and as directed.
S&F in repair 25 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repair 40 mm bore gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed.
S&F in repair Brass chromium plated shower rose of size 125 mm with swivel joint for fixing to GI pipe of 15mm dia including galvanised iron elbow and nipple as required complete all as specified and as directed. Make:-Parryware Cat part No T-9809 A1 or equivalent as approved.
S&F in repair chromium plated fancy type health faucet with hose & hook for EWC including all necessary fitting complete all as specified and as directed. Make :- Prayag Cat No 452 or equivalent as approved.
Supply only in repair stack clamps for 75 mm bore pipe made out of 50 mmx 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
Supply only in repair stack clamps for 110 mm bore pipe made out of 50 mmx 5 mm flat iron and 16 mm dia round iron stays, including bolts and nuts and securing ends of stays to wall or roof complete all as specified and as directed.
S&F in repair plastic water closet seat (EWC), white, closed pattern with flat bottom and cover and mild steel chromium plated hinging device complete all as specified and as directed.
S&F in repair PVC cover suitable for 5000 litre capacity water tank including necessary fixing accessories complete all as specified and as directed.
S&F stainless steel tube grade 304, railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed.
M&L cutting holes in brick walls not exceeding half brick, built in cemet mortar for inserting pipe or holdfasts and making good the disturbed surface in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 using 20 mm graded stone aggregate as required complete all as specified and as directed.
S&F in repair stainless steel of grade SS-304 , type D of size 300mm x 19mm x 1.9 mm friction hinges to the side/top hung in ventilation of approved quality with necessary stainless steel screws etc. complete all as specified as directed.
M&L for necessary repair to existing high or low level flushing cistern by adjusting the float valve ,leakage of PVC connection,replacement of rubber washer,check nuts,plug etc as required to make it fully functional and fixed complete all as specified and as directed.
S&F in repair 102 mm dia chromium plated round shaped doom type grating for floor trap complete all as specified and as directed. Make:- Prayag Cat No FT-03 M
Supply only water proofing compound complete all as specified and as directed.
Taking down carefully copper / aluminium point wiring(light,fan,socket or power) complete along with fittings such as switches, sockets, ceiling rose , lamp holder, tube light fittings and making good distrubed surfaces of walls or ceiling etc to match with the existing complete all as specified and as directed.
M&L for point wiring with 1.5 sqmm PVC FRLS insulated unsheathed multistranded copper cable with 1.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity drawn in including concealed PVC conduit not less than 20mm dia with pressed mild steel concealed box made out of 1.6 mm thick sheet overed with 3mm thick laminated sheets for mounting for mounting switches/sockets etc and other accessories such as spacers, saddles, junction boxes for one light / fan point / bell point/5 amp socket controlled by one switch complete all as specified and as directed.
All as per item No 81 above but with 2.5 Sqmm PVC FRLS insulated multistranded copper cable with 2.5 sqmm PVC FRLS insulated multistranded copper cable as earth continuity for power power point on independent board complete all as specified and as directed.
S&F switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.
S&F in replacement of switch piano, flush type, single pole, one way, 5/6 Amp, complete all as specified and as directed.
S&F switch socket outlet 2 in 1, 3 pin 5 Amp, 230 Volt, complete all as specified and as directed.
S&F switch socket combination , 2 in 1,3 pin 5/16 Amp, 230 Volt, complete all as specified and as directed.
S&F ceiling rose, surface bakelite 65mm x 30mm, three terminals over and including PVC box of size 3"x3" round type complete all as specified and as directed.
M&L sub main wiring with 2 runs of 6.0 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including surface PVC casing capping not less than 25 mm wide and one run of PVC FRLS insulated unsheathed 6.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specifed and as directed. Note :- 2 runs of 6.0 Sqmm, 1 run of 6.0 Sqmm copper earth wire and 01 run of PVC casing capping shall be measured as one unit length.
M&L sub main wiring with 2 runs of 4.0 sqmm PVC FRLS insulated unsheathed copper cable multistandard 1100 V drawn in and including concealed PVC conduit not less than 25 mm dia and one run of PVC FRLS insulated unsheathed 4.0 Sqmm copper cable as earth continuity conductor with all accessories complete all as specifed and as directed. Note :- 2 runs of 4.0 Sqmm, 1 run of 4.0 Sqmm copper earth wire and 01 run of PVC conduit shall be measured as one unit length.
S&F sheet metal enclosure single pole and neutral with two pin and earth plug and socket complete with on single pole MCB 20 Amp complete complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.
S&F in replacement of 20 Watt tubelight fitting with lamp, Endura linear LED Wall mounted LED batten with polycarbonate housing & intergated driver for efficient heat dissipation with complete fitting complete all as specified and as directed. Make:- Havell Cat part No.- LUMILINEBS20WLED865SPCWH or Bajaj Cat part No. BCLSB 20 WH as approved
S&F factory made sheet metal enclosure for DBs double door fixed flush to the wall, SPN, 240 volt, 8 way, IP-42 protection with 200 Amp rated bus bar and 1.5 sqmm copper PVC sheathed stranded cable for earth continuity and suitable for housing MCB’s complete all as specified and as directed. Make:- C&S Electric Ltd /Standard/Havells
S&F MCB 6 to 32 Amp, 240 Volt, SP, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.
S&F MCB 40 Amp, 240 Volt, SPN, breaking capacity 10 KA 'C' series, complete all as specified and as directed. Make:- C&S Electric Ltd/Standard/Havells.
S&F Exhaust fan 300 mm sweep, 1400 RPM, metal body heavy duty, AC single phase,230 V including louvers and necessary connection with multistanded copper conductor flexible copper wire of suitable size from ceiling rose to connector of fan and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing complete all as specified and as directed . Make :- Bajaj /Havells/Crompton Greaves /Khaitan/Almonard as approved.
S&F 25 liter capacity electric water heater (geyser), AC, single phase,230 Volt having steel body with copper inner tank and heating element upto 2KW capcity BEE 5 Star complete and necessary fixing arrangement ie anchor bolts,nuts, washers and making good to the disturbed surfaces to match with the existing including connection with multistranded copper conductor flexible wire of suitable size from ceiling rose and stainless steel connection pipe of suitable length complete all as specified and as directed. Make :- Havells/Crompton Greaves /Khaitan/Almonard as approved.
M&L cutting opening through brick/stone wall built in cement mortar for fixing exhaust fan of 300 mm sweep and making good the disturbed surface in cement mortar 1:4 and applying two coats of white wash to match with the existing complete all as specified and as directed.
S&F in repair 100 mm long butt hinges, medium weight, cold rolled mild steel complete all as specified and as directed.
S&F in replacement of 9 Watt tube light fitting with lamp, Endura linear LED, wall mounted batten with polycarbonate housing and intigrated driver for efficient heat dissipation having THD<20% with complete including connection with two core twisted flexible copper conductor cable of suitable size upto ceiling rose complete all as specified and as directed. Make:- Havells Cat part No LUMILINEBS9WLED865SPCWH or Bajaj Cat part No BCLSB 10WH as approved.
D RAVICHANDRAN
M/S S R Saha And Co
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .