Replacement of wornout / damaged components of 10000 GPH x 335 meter head HC pump set x 100 HP motor, 10000 GPH x 40 meter head HC pump at pumping station Kaghote, 110 ampere LT control panel at pumping station Thaley stage-0 and 5000 GPH x 80 meter

Amount

Replacement of damaged electro mechanical components of 10000 GPH x 335 meter head x 100 HP pump and motor installed at pumping station Kaghote stage-0 by way of disconnecting of all electrical connections, unfastening both pump and motor from base frame, decoupling of pump from motor, carrying pump-motor set from pumping station to road side by way of head load and then to work shop by mechanical transportation. Dismantling of pump and extraction of internal parts. Replacement of damaged impellers 8 nos., diffusers 7 nos., diffuser bushes 5nos., impeller bushes 5 nos., neck rings 4 nos., DE and NDE bearings with corresponding new components conforming to same size and specifications as per old samples. Job also includes dismantling of motor, removal of end covers and then replacement of damaged bearings (6316-1no. and NU316-1no.) and cooling fan of 100 HP motor with new components. Assembling both pump and motor and shifting back to pumping station by using manual labour tools and tackles and mechanical transport. Fitment of pump motor set on base frame after coupling pump and motor after proper leveling & alignment including replacement of nuts, bolts, rubber bushes and gaskets at delivery and suction side and testing the pumping unit on no load & full load at site. Complete job includes cost of material, labour charges, manual carriage, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

Replacement of damaged mechanical parts of 10000 GPH x 40 meter head HC pump set installed at pumping station Kaghote Stage-0 by way of disconnecting of all electrical connections, unfastening from base frame decoupling of pump from motor, carrying pump-set from pumping station to road side by way of head load and then to work shop by mechanical transportation. Replacement of damaged pump shaft, impeller 1 no, shaft protection sleeve-1no., gland plate-1no. , bearings with corresponding new components conforming to same size and specifications as per old sample. Assembling the unit and shifting back to pumping station by using manual labour, tools and tackles and mechanical transport. Fitment ,coupling pump motor set , after making proper leveling alignment and testing the pump set on load at site. Complete job includes cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

Replacement of damaged components of 415v, 3 phase 110 ampere LT control panel cum fault analyzer cum auto starter Installed at pumping station Thaley stage-0. The job involves dismantling of all the incoming and outgoing power cables from the panel. Replacement of damaged fault analyzer CB4SA unit and 110 & 70 ampere main and star power contactors-MNX-110-1 no. and MNX-70-1no. of star- delta auto starter & with new units conforming to same rating and specifications as per old sample. Job also includes replacement of damaged amperemeter, voltmeter, current transformer, fuse set, internal wiring with new components. Assembling the unit, shifting back to site, fitment and testing of the equipment, without load and thereafter on full load. Job includes the cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

Replacement of damaged / wornout components of 5000 GPH x 80 meter head pump installed at pumping station Ritti Barta stage-0. The job involves disconnecting the main supply, unfastening pump from base frame, decoupling of pump from motor and shifting to workshop by way of manual carriage and mechanical transportation. Replacement of damaged pump shaft, impeller-2nos., diffuser-02no.,bush-2nos, neck ring-4no., gland plate-1no., check nut-2no., bearings, bracket-1no., coupling with bolts and bushes with corresponding new components conforming to same size and specification as per old sample. Assembling the unit, shifting back to site, fitment, coupling with motor after making proper leveling and alignment. Job includes the cost of material, labour charges, hire charges of tools and tackles etc. Rebate, if any, should be quoted separately.

M/S RAGHUNATH MECHANICAL AND ELECTRICAL ENGINEERING WORKS

G S ENGINEERING WORKS

GEETA ENGINEERING MECH WORKS