ADDN/ALTN/IMP TO CERTAIN GUARD POSTS, AFNET BLDG, PROVISION OF EARTHING PITS AND CHAIN LINK FENCING AT CETAIN LOCATIONS AND ADDN/ALTN/IMP TO GPU SHELTER, PROVN OF STORAGE SHED AND PATH BETWEEN FSS AND TECH STORE AT AFS HAKIMPET

Amount

Demolition of unreinforced cement Concrete of any description and in any position not otherwise specifically provided for complete all as specified and as directed by Engineer-In-Charge

M&L 25 mm thick PCC (1:2:4 ) type B0 using 12.50 mm graded stone aggregate as in floors, sub base path etc., complete all as specified and directed.

M&L Cement concrete 1:4:8 Type D2 40mm Graded stone aggregate filling and mass concrete in foundation/sunkun floor complete all as specified and directed.

M&L Non skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.11 sqm but not exceeding 0.18 sqm, with screed bed or bedding layer 15mm thick in CM 1:4 of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and directed.

M&L Non skid coloured ceramic tiles of 7 to 8 mm thick (square/ rectangular) area of each the exceeding 0.06 sqm but not exceeding 0.11 sqm, with screed bed or bedding layer 15mm thick in CM 1:4 of approved 1st quality in floors etc set and jointed in neat cement slurry and pointed with white / coloured cement to match coloured tiles complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding & conc (but not backing) and rubbish off the premises complete all as specified and as directed.

M&L for rendering to Brick surfaces or fair faces of concrete surfaces, 10mm thick in cement mortar 1:3, scoured for fixing tiles /stone slabs in skirting/ dados etc to complete all as specified and directed.

M&L Glazed Ceramic tiles coloured, of size 450mm X 350mm/300mm X 7mm thick approved 1st quality as in vertical surfaces such as skirting/ dados and risers to steps etc, set and jointed in neat cement slurry and pointed with white/ coloured cement to match the colour of tiles complete all as specified and directed. Note: Mitred tiling to be done at external corners with a cut at a 45 degree angle along the edge of the tile and the cost is included in rate quoted above.

Dismantling of stone slabs of any description or thickness in floors and approns etc, laid,bedded and pointed in any mortar complete all as specified and directed.

M&L Machine cut kota stone slab in stairs/ flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as directed.

M&L Kota stone slab 20-25mm thick in skirting, dado and pillar laid over cement screed and including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as directed.

M&L 20 mm thick Granite (of any type) tiles machine cut, bedded over cement screed bed 15 mm thick in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed.

Rounding to edge of stone slab one edge, such on in step, cooking platform, window cills and other similar situation complete all as specified and directed.

Taking down Chowkhats or frames with shutters exc 1.5 sq. m but n exc 4 sq. m each complete all as specified and as directed.

Taking down Chowkhats or frames with shutters n exc 1.5 sq. m each complete all as specified and as directed

S&F Plain, solid, straight chowkats and frames 2nd class hard wood, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S&F 35mm of 2nd class HW rail and style Plain framed, facotry made panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003(Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in-charge.

S&F 30mm thick factory made skeleton shutters, open rebated and preparedto receive gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkat complete all as specified and as directed.

S&F 100 mm long Butt hinges, heavy weight, cold rolled mild steel, and fixed, for flush pressed steel door frame complete all as specified directed by the Engineer-in-Charge

S&F 200 mm size Aluminium tower bolts, stove enamelled black, with bright bolt and fixed complete all as specified and as directed by the Engineer-in-Charge

S&F 150 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

S&F 250 mm long Aluminium alloy, anodised,sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and as directed.

S&F mild steel helical door spring rat tail rod model including roller plate complete 300 mm long complete all as specified and as directed by the Engineer-in-Charge.

S&F 140 mm long floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring fixed in floor complete all as specified and as directed by the Engineer-in-Charge.

S&F solid PVC door frame of size 50 mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification complete all as specified and as directed by the Engineer-in-Charge.

S&F Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm plain colour Prelam PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing all as directed.

S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 butt hinges for PVC door frame complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 150 mm size Alluminium, anodised barrel tower bolts of extruted section and fixed complete all as specified and as directed by the Engineer-in-Charge

Supply and fix 125 mm size extruded aluminium door handles fabricated type complete all as specified and as directed by the Engineer-in-Charge

S&F Powder coated Aluminium frame for doors,windows/ Louvered and partitions with one or more rebates including cleat for fixing etc including powder coating of any colour (min thickness of powder coating 50 micron) complete all as specified and directed by Engr-in-charge.

S & F Powder coated aluminium window shutters including frame of weight not less than 1.5 Kg/RM, sliding type two track for fixing glass including necessary joining cleats, glazing clips, rubber neoprene packing, powder coated aluminium snap beading, screws, anodised aluminium fittings such as handles and locking arrangement complete all as specified and as directed. Note : (i) Item include frame and shutter. (ii) Glass and mesh will be measured and paid separately under relevant item.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average with of aperture 1.4 0 mm and fixed with stainless steel wire staples complete all as specified and as directed by the Engineer-in-Charge.

S&F 5.5 mm thick tinted glass of superior quality fixed to aluminium partition and door each pan.

S&F Anodised aluminium grill (deco grill) any size 10 mm thick complete with frame or channel section including all necessary fittings complete all as specified.

Supply and fix 25 mm dia Stainless steel curtain rods with fixing brackets, stops, rollers etc.and taking down old pipe complete all as specified and as directed by the Engineer-in-Charge.

Material and labour for Second class hard wood plain solid straight chowkats and frames wrought, framed, rebated on the solid rounded or chamfered put together with glue pinned at joints complete all as specified and as directed by the Engineer-in-Charge.

Supply and fix 20mm thick flush shutters, solid core construction, with block board core and plywood face panels for cabinet and cupbord, commercial type on both sides complete, as specified and directed

M & L 1mm to 1.5mm thick sunmyca sheet glossy finish any colour paste with favicol on plywood for cabinet and cupbord, commercial type on one sides complete all as specified and directed

S&F external teak wood lipping, 6 mm thick 18/19mm wide fixed with nails complete all as specified and as directed.

S&F continuous (piano) hinges, mild steel, bright finish or electro galvanised width of flap 40 mm complete all as specified and as directed.

Supply and fixing 100 mm size hasp and staple, hinge type aluminium anodised complete all as specified and as directed.

S&F brass magnet for cupboard complete all as specified and as directed.

S&F 50mm dia, polished, hard wood knobs fixed with screws complete all as specified and as directed.

Taking down plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar including removal of spoil/ demolished material out of the premises of the site complete all as specified and as directed.

M&L Rendering 10 mm thick in CM 1:3 on celling surface, finished even and smooth with out using extra cement up to ht 6.5 mtr complete all as specified and directed.

M&L Rendering 15mm thick in CM 1:4 on fair faces of brickwork or concrete surfaces finished fair and even up to ht 6.5mtr complete all as specified and as directed.

M&L Rendering 15 mm thick in CM 1:6 on brick massonry surfaces of walls, finished fair and even with out using extra cement complete all as specified and directed.

M&L Complete removal of existing treatment on walls complete all as specified and as directed.

M&L Complete removal of existing treatment on Ceilings complete all as specified and as directed.

M&L for 3mm thick wall care putty on wall complete all as specified and as directed.

M&L for 2 coats of Oil bound distempering on New/ Old surfaces over a coat of primer with white or tinted on walls complete all as specified and as directed.

M&L Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed.

M&L 3 coats of white wash over a coat of primer on newly plastered surfaces on ceilings complete all as specified and as directed.

S&F 500 Ltrs capacity Rotational moulded, polythene water storage tanks (cylindrical shape with vertical top closed) hoisted and fixed in position including taking down old unserviseable water tanks complete all as specified and directed.

S&F 20 mm bore dia ball valves, high pressure of PTMT with epoxy coated aluminium rod & high dencity plasstic ball screwed for iron pipe and fixed .(minimum weight 15 mm-142gms/20mm-210gms) complete all as specified and directed.

S&F in repairs Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for 25 mm bore pipe complete all as specified and directed.

Taking down steel tubing and connections 15 mm bore, including cleaning for refixing or removal to store complete all as specified and directed.

All same as per item here in before but 20 mm bore.

All same as per item here in before but 25 mm bore.

Supplying and laying 16mm bore of CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc. in repairs including concealed piping after cutting in brick work/ stone masonry walls where ever required complete all as specified and directed.

All as per item above but 20mm bore.

Supply and fix steel water tubing 25 mm bore medium grade galvanized with all fittings such as bends, tees, nipples, elbows, reducers, etc, fixed complete to walls and ceilings or laid in floors all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting exc 10 cm but not exc 20 cm girth complete all as specified and as directed

S&F Vitreous China wash hand basin whiteflat back, size 550x400mm including couplings, waste pipe, connections all fittings complete all as specified and as directed.

S&F 15mm bore pillar taps CP brass chromium plated fancy type screwed down high pressure with chromium plated screwed shanks and fly nuts complete screwed for iron pipe in repairs all as specified and directed.

S&F Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) including including Pedestal pan and trap, including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, etc..and Seat and cover for pedestal pan with all as specified and directed.

S&F vitreous china squatting pan (orissa pattern), size 580x440 mm white with integral foot rests including removing the existing one complete and making good all connections as in repairs all as specified and directed.

Supply and fix 10 Litre capacity PVC low level flushing cistern with ball valve and handle/push button 32mm dia PVC flush pipe including 15 mm bore LDPE pipe 45cm long with brass nuts and washers complete all as specified and directed.

S&F brass CP Two way tap screwed down for iron pipe suitable for 15 mm dia bore of pipe complete all as specified and as directed by the Engineer-in-Charge. Make : Prayag/Parryware or equivalent

S&F brass chromium plated health faucet 15mm dia reinforced pipe fitted to GI pipe complete all as specified and directed. Make : Prayag/Parryware or equivalent

S&F brass CP shower rose with arms 75 mm size fixed in repairs complete all as specified and directed.

Supply and fix 15 mm bore bib tap brass chromium plated fancy type with crutch or butterfly handle screwed down, screwed for iron pipe fixed in repairs complete all as specified and directed.(make- parryware/ jaguar)

S&F angle valves, fancy type, chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repair.(15mm bore). Make- Parryware/ Jaguar

S&F concealled stop valves 15 mm bore fancy type, chromium plated, with long shank and cup, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions and fixed in repairs all as specified and directed.

S&F Sheet glass shelf assembly for WHB consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed

S&F Corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard complete all as specified and directed

S&F Towel ring for WHB consisting chromium plated complete all as specified and directed

S&F Towel Rail 600mm long 20mm dia,D type cromium plated, fixed with and including Chromium plated brass screws and wooden/plastic cleats. and fixed in all as specified and directed.

S&F Soap dish any type fixed to plugs with chromium plated complete all as specified and directed

S&F PVC (SWR) floor trap of 75mm, plain with Grating doom 125 mm dia with or without waste hole (as necessity) of PTMT (Minimum weight 40gms) including jointing with solvent cement complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR) 75mm dia pipes single socketed, in any length with rubber ring joints, fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 75mm bore complete all as specified and as directed.

S&F PVC (SWR)110mm dia pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and as directed.

S&F PVC (SWR)110mm pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed.

S&F PVC (SWR) bends of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, single (single Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) branch piece of 110mm bore, double (double Y) equal or unequal complete all as specified and as directed.

S&F PVC (SWR) vent cowl of 110mm bore complete all as specified and as directed.

S&F PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M&L Plain Cement concrete type C-2, 1:3:6(40mm graded aggregate) 75mm thick Laid in plinth protection including Grade B joint filling as specified and directed by Engineer In charge.

M&L Hardcore of gauge nexc 63mm, deposited, spread and levelled in layers n. exc 15cm thick, watered and rammed to surface complete all as directed.

M&L Cement concrete type D-2, 1:4:8 (40mm graded aggregate) 75mm thick in floors and pavings etc. all as specified and directed.

M&L sand filling under floor or in foundations including watering and consolidation all as specified and directed.

M&L Machine pressed precast conctete interlocking paver block with grey cement and colour pigment any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 all as specified and directed.

Material and labour for Colour Chequered cement concrete tiles 30 cm x 30 cm x 25 mm thick with grey cement and no pigment set jointed and pointed in neat cement slurry colour to match including Screed bed of mortar 15 mm thick for laying floor finishes with cement motor 1:4 complete all as directed.

M&L Providing, cement concrete in roof kerbs or mud stops, rounded 1:2:4 type B0 using 12.5mm graded stone aggregate or all as specified and directed.

Brickwork with fly ash bricks, straight or curved on plain exc 6m mean radius, built in cemrent mortar 1:4 complete all as specified and as directed.

Removing excavated material exc. 1.5 m but n.exc 5km and depositing where directed

Taking down plaster including tiling on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. in cement lime or cement mortar complete all as specified and as directed

M&L for rendering to brick masonry surfaces 15mm thick in cement mortar 1:6, complete all as specified and directed

M&L for 2 coats of Oil bound distempering over a coat of primer over 3mm thick wall putty with white or tinted on walls complete all as specified and as direcetd.

M&L for double charged Vitrified light coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in floors etc set & jointed in neat cement slurry & pointed in white or coloured cement to match including 15 mm thick screed bed/bedding layer in CM (1:6) complete all as specified and as direcetd.

M&L for double charged Vitrified light coloured Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tile not exceeding 0.36 sqm, in Dado/ skirting etc set & jointed in neat cement slurry & pointed in white or coloured cement to match and backing coat of 10mm thick in CM 1:4

S&F false ceiling at all heights with semi perforated 12mm thick micro tegular edged GRG (Glass Fiber Reinforced Gypsum ) false ceiling tiles of size 595x595mm of approved texture, design and patterns having moisture content less than2%, humidity resistance of 99%, NRC 0.5-0.75 as per IS 8225:1987, Non combustable as per BS 476 (part 4 )-1970 and light reflectance 85% min to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @120 grams per sqm including both sides) comprising of main -T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15x32 mm of length1200mm and secondary intermediate cross-T of size 15x32 mm of length 600mm to form grid module of size 600 x 600 mm , suspended from ceiling using galvanised mild steel items ( galvanising @ 80 gms per sqm) i.e. 50mm long, 8 mm outer diameter M6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 24x24x0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall SS screws all as specified and directed by Engr-in -charge.

M&L Pre-cast cement concrete Type C1 1:3:6 block masonry with solid blocks, exc. 10 cm in width built in cemrent mortar 1:4 complete,all as specified and directed.

M&L for rendering to brick masonry surfaces 10mm thick in cement mortar 1:4, complete all as specified and directed

Supplying and laying 16mm bore of CPVC pipes with SDR 13.5 pipes & plain CPVC SDR 11 fittings fixed complete to walls, ceilings or in floors etc. in repairs including concealed piping after cutting in brick work/ stone masonry walls where ever required complete all as specified and directed.

S&F in repair angle valves 15 mm bore fancy type, chromium plated, screwed down, high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions all as specified and directed.

Supply and fix 15 mm bore LDPE pipe 45cm long with brass nuts and washers on both ends all as in repairs specified and directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, in soft/loose soil complete all as directed.

M&L for MS structureal steel Fe 410 Gd E250 quality B in roof trusses (framed)trussed, purlins, rafters etc connecting with bolts/welding to baseplates etc complete all as specified and as directed

M&L for MS plates Fe 410 Gd E250 Qulaity B in roof trusses (framed)trussed, etc connecting with bolts/welding as baseplates/ connecting plates etc complete all as specified and as directed

M&L for 16 to 20mm dia MS bolts and nuts made with hexagonal or square headed one end and screwed the other and to be fitted with washer and one nut n exc 30 cm long complete all as specified and as directed

S&F Pre painted galuvalume aluminium zink coating GI based corrugated sheet 0.5mm thick of any colour having tensle strength of 550Mpa as in roof covering/cladding to wall with self tapping screws complete all as specified and as directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws as specified

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth,not otherwise and applying two coats of synthetic enamel paint over a coat of redoxide primer complete all as specified and as directed

M&L for 100mm thick PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed

M&L 100mm thick Cement concrete type B- 2, 1:2:4 (40mm graded aggregate) laid in bays finished fair surfaces complete all as specified and directed

M&L forming contraction (dummy) joints 65mm deep and 10mm wide filled with sealing compound Grade 'B' complete all as specified and directed

Excavating over areas, n exc 1.5 m deep and getting out in hard/dense soil complete all as specified and directed

M&L for Rubberised chequered cement concrete tiles 25cm x 25cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors with grey cement and pigment laid over 15mm thick cement screed bed 1:6 complete all as specified and directed.

Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand),including making joints with or without grooves(thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete.

M&L Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed

M & L Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc complete all as specified and as directed

M & L precast RCC 1:2:4 type B-1 using 20mm graded stone aggregate as in cover slabs set in CM 1:6. including all necessary form work etc complete all as specified and as directed

Taking down carefully existing unserviceable aluminum/copper point wiring (light, fan, socket or power) of any description & in any position complete including all fittings & fixtures such as switches, ceiling roses, pendants, regulators, socket, light fittings, lamp holders etc including taking out and removing serviceable fittings/fixtures and making good the disturbed surface of walls, floors, ceiling etc. to match with the existing surfaces complete all as specified and directed

M&L for point wiring with using 1.5 Sqmm (nominal area) multi standard copper conductor, single core, FRLS PVC insulated & unsheathed cable, 1100 volts grade with and including PVC casing and capping / PVC Conduit pipe of adequate size fixed on surface with PVC rawl plugs with sunken type pressed steel terminal box and junction boxes 1.6mm thick of suitable size, duly painted with one coat of red oxide primer and two coats of black bituminous paint for mounting fittings and wiring to be terminated in pressed steel sunken boxes with and including all accessories and using 1.5 Sqmm (nominal area) stranded copper conductor single core conductor, FRLS PVC insulated & unsheathed cable as in earth wire connected to common earth dolly complete all as specified and directed for following:- NOTE :- (i) Quoted rate shall be deemed to include the cost of cutting chases in walls / pillars /column etc. of any description for concealing the boxes to required depth & making good the disturbed surface in CM 1:4 including finishing the surface to match with the existing surface. (ii) Fittings like switches, sockets, regulators, lamp holders, light fittings shall be measured and paid for separately under appropriate item of Schedule `A'. (iii) The quoted rates shall be deemed to be inclusive for provision of covering sunken boards/terminal boxes / junction boxes of any shape and size with modular white colour cover plate with frame or with 3 mm thick laminated sheet fixed with suitable brass screws and cup washers

One light/buzzer point controlled by one; one way switch.

One fan/exhaust fan point controlled by one, one way switch

One 3 pin socket out let 5 amp point on the (same board) with other switches.

One 3 pin socket outlet 5 amp point on the independent board

All as per item here-in-before but with 4 sq mm size FRLS pvc insulated and unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for 3 pin socket outlet 15 amp on independent board.

All as per item here-in-before but with 4 sq mm size FRLS pvc insulated and `unsheathed 1100 volts grade single core stranded (multistrand) copper conductor cable for A/C Plug socket

S&F ceiling rose surface bakelite 63.5 x 20 mm, three terminals, complete all as specified and directed.

Supply and fix modular switch 6 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular switch 16 Amp, one way, 1 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge.

Supply and fix modular socket, 6 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular socket, 6 /16 Amp, 2/3 pin combined, 2 module, 230 volts AC circuit complete all as specified and directed by Engr-in-charge

Supply and fix modular fan regulator 120 W 2 module complete all as specified and directed

Supply and fix wall mounted LED Batten fittings extruded aluminium heat sink provided for efficient heat dissipation & integrated electronic driver 20 Watt LED (4 feet) complete with all accessories including connecting up with three core twisted flexible copper conductor cable with suitable size complete all as specified and directed by ENgr-in-charge.

S & F in replacement 10 W mirror light having indirect up down light for mirror and as well light application with CCT 6000K, including LED Bulb/Module and Electrical connection with 3 core flexible wire of appropriate size from ceiling rose to the tubelight fitting, all as specified and directed.

Taking down distribution boards / main switches of any type, size and capacity complete all as specified and directed by Engr-in-charge

Taking down MCBs, metal clad plug of any type, size and capacity complete all as specified and directed by Engr-in-charge

S & F sheet metal enclosure powder painted for MCB DB SPN 08 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

Supply and fixing MCB SPN, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

S&F MCB single pole, 6 to 32 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Taking Down Old Unserviceable Submain wiring complete including all accessories and making good the disturbed surfaces all as specified and as directed.

M/L for Sub main wiring with 2 runs of PVC insulated unsheathed multi stranded single core copper conducter 6 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 2 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M/L for Sub main wiring with 4 runs of PVC insulated unsheathed multi stranded single core copper conducter 10 Sqmm drawn through PVC conduit/casing capping including accessaries with 6 sqmm PVC insulated earth wire fixed to the existing wall with saddles, screws etc after removing the unserviceable wiring and connecting up ,all as directed. Note: 4 runs of cable and one run earth wire and conduit/Casing & Caping will be measured as one length.

M&L for earthing complete with galvanized steel earth plate electrode 600mm X 600mm X 6mm buried directly in ground vertically to a depth not less than 2.25 metre below normal ground level (with top edge of earth plate not less than 1.5 metre below ground level) connected to galvanized iron earth lead wire 4mm dia, (main earthing lead) by means of galvanized bolts, nuts and washers all as shown in electrical plate No 3 of MES Schedule Part-I (2009) with connected to earth test point & to main switch board with & including adequate quantity of charcoal dust and common salt alround earth plate & 15 mm dia GI pipe medium grade for earth lead protection pipe for suitable length and GI pipe 20 mm dia medium grade for watering pipe with funnel & wire mesh including necessary earth work and PCC (1: 3 : 6) type C-1 for earth pit and 40 mm thick precast RCC cover in 1 : 2 : 4 type B-1 with 3 Nos 8 mm dia TMT bars both ways with 12mm dia round bar handle complete all as specified & directed. NOTE: Earth lead wire and its protection pipe upto and including 7.5 mtr only from the top of earth electrode are included under this item and additional earth GI earth wire/protection pipe etc. if any required at site shall be measured and paid for separately under appropriate item of Schedule `A’

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor, BEE 5 Star rating complete all as specified and directed by Engr-in-charge.

S & F in repairs earth plug and socket, single pole, neutral sheet metal enclosures with a two pin, plug and socket 20Amp, 240 volts with and including one MCB, SP, 20A, 240 Volts as per all as specified and directed.

S & F sheet metal enclosure powder painted for MCB DB TPN 04 way double door with IP-42 protection with Din rail and busbar complete all as specified and directed by accepting officer

Supply and fixing MCB TPN, 63 Amps in `C’ series having current rating 10 KA complete all as specified and directed.

Supply and fixing of Early streaming emmission (ESE) lightening arrestor made of stainless steel enclosure of specifications of suitable transformer & Triggering release and charge accumilator ambient electrical field sensor and internal triggering circuitary & electronics and protection radius 40 mtr and all accessaries complete all as specified and directed by Engr-in-charge.

Supply and fix GI pipe of 40 mm dia, light grade complete all as specified and directed.

Supply and fixing of Copper strip 20 x 3 mm with saddles and fixing screws etc., for roof conductors and down conductors above ground complete all as specified and directed.

Material and Labour for Chemical Earthing complete with copper earth plate 900x600x5 mm buried directly in ground with the faces vertical to a depth not less than 2.25 mtr below ground level as shown in plate no 3 ( Top most edge not less than 1.5 metre below ground level) connected to copper earth strip 32X6 mm with means of tinned brass bolts, nuts and washer and connected to earth test point and main switch board and equipment with adequate quantity of chemical powder (Carbon powder / Bentonite powder) around earth plate and GI Protection pipe of 40 mm dia for earth strip and 20 mm dia watering pipe and including all necessary earth work and PCC (1:3:6) type C1 for earth pit and 40 mm thick Precast RCC cover 1:2:4 Type B-1 with 3 nos 8 mm dia TMT bars both ways including 12 mm dia round bar handle complete all as specified and directed by Accepting officer. Note : (a) Earth strip and its protection pipe upto and including only 7.5 mtr from the top of earth electrode are included under this item and any additional pipe and strip required at site shall be paid separately under appropriate item of Sch'A' . (b) The rate quoted by contractor shall also include the cost of necessary earth work in any type of soil and PCC (1:3:6) type C1, Precast RCC cover 1:2:4 type B1 with 3 nos 8 mm dia TMT bars both 12 mm dia round bar handle and including waterring pipe.

Supply and fixing of Test point terminal block made of gun metal or phrosphrous bronze 75x75x25mm, drilled and screwed including 3 Nos, 8mm dia 25mm long hex, head screw complete all as specified and directed.

Material and labour for block of PCC 1:3:6 type C1 of size 150x150x200 mm for holding GI pipe (20 mm graded aggregate ) complete all as specified and directed

Provision of flat iron clamps 25x6 mm, MS collars, bolts, nuts, washers and MS Plates complete all as specified and directed

Supply and fixing LED luminaire 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed by Engr-in-charge.

Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection with suitable no of nuts, bolts and clamps complete all as specified and directed by Engr-in-charge

Supply and fixing of PVC weather proof flat twin core cable 4 sqmm complete all as specified and directed by Engr-in-charge.

Supply and fix exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and directed by Engr-in-charge

saradhi construction combines

Saiansh Associates

VACON INFRASTRUCTURES

M/S P.SWAROOP KUMAR

KOGANTI CONSTRUCTION COMPANY