Sikari lakada sampark marg se K.G bandh uttar dhal se Chote sachivalay hote hue virenfdranath panday ke ghar tak lakadadeeh sampark marg ka nirman kary

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m, transporting to site, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Construction of granular Sub-base by providing well graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with smooth wheel roller to achieve the desired density, complete as per Techincal Specification Clause 401.complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Providing ,Laying ,spreading and compacting stone aggregates of 63-45 mm size to water bound macadam specification including spreading in uniform thickness , hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening,binding materials to fill up theinterstices of coarse aggregate ,watering and compacting to the required density grading 2 as per Technical specification clause 405complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Providing ,Laying ,spreading and compacting stone aggregates of 53-22.4 mm size material to water bound macadam specification including spreading in uniform thickness, hand packing ,rolling with Smooth wheel roller 80-100 KN in stages to proper grade and camber ,applying and brooming ,Stone screening grit to fill up the interstices of coarse aggregate ,watering and compacting to the required density grading 3 as per Technical specification clause 405. as per Technical Specification complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Brick edging on both sides of road with Class-M150 bricks laid on edge with mud mortar including supply of bricks, labour, T&P and all taxes etc. complete for proper completion of the work as per specification and direction of E/ I. As per direction of E/I .With All Aspects (Rates are Excluding G.S.T but Including All Taxes Royalty, Labour cess, Material & T&P.).

Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means.as per Technical Specification Clause 502complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Providing and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 3.00 kg/10 sqm on the prepared bituminous surface Cleaned with Hydraulic broom as per Technical Specification Clause 503..as per Technical Specification complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Providing, laying & rolling of open graded premix carpet of 20 mm thickness composed of 13.2mm to 5.6 mm (Crushed stone chiping 13.2mm @ 0.18 cum./10 sqm. & crushed stone chiping 11.2mm @ 0.09 cum./10 sqm.) aggregates either using penetration grade bitumen or emulsion to required line ,grade and level to serve as wearing course on a previously prepared base including mixing in a suitable plant laying and rolling with a three wheel 80-100 KN static roller capacity finished to required level and grades to be followed by seal coat either Type-C as per technical specification clause 508. By manual means (l) Bitumen(VG-10) @ 14.60 kg. per 10 sqm. as per Technical Specification complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C with 6.7mm crushed stone chiping @ 0.09 cum./10 sqm. as per Technical Specification Clause 510. Bitumen(VG-10) @ 6.5 kg. per 10 sqm. as per Technical Specification complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Excavation in Foundation in ordinary soil (Loamclay or sand) including lift up to 1.5m and lead up to 30m. and including filling, watering and ramming of excavated earth into the space between the building and sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the E/I up to a distance of 30m. from the foundation trenches including all T&P phowereh and basket etc. complete. as per S.I. No. 251. complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Cement concrete with 4cm gauge approved brick ballast, find sand and cement in porportion of 8:4:1 including supply of all material, labour, T&P etc. required for proper completion of work. As per si no 274.complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Class 150 A brick work in 1:4 cement and fine sand mortar in foundation and plinth. As per SI. No. 305complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Supply of hume pipe of 600 mm dia complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Laying of hume pipe of 900 mm dia complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Struck pointing with cement mortar consisting of 1part of cement and 2 part of fine sand of 1.25FM with curing including supply of all material labour and T&Petc required for proper completion of work as per S.I. No.574 .complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Cement Concrete with 4cm. gauge approved stone ballast, approved coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

R.C.C. Work with cement approved coarse sand and 20 mm gauge approved stone grit in the proportion of 1:1.5:3 in lintel T Beam ans slab excluding supply of reinforcement and its fixing and binding the same with 24 b.w.g.g.i binding wire and including nacessary centering and shuttering etc as per S.I.No. 288A with curing complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc) .

Supplying, fitting and placing HYSD bar reinforcement in foundation substucture super-structure complete as per drawing and technical specifications as per S.I.No. 504 complete in all aspects or as per direction of E/I (Rates are Excluding GST but Including of all other taxes labour cess ,material ,labour and T&P etc)

Providing & fixing of MS Iron Project Detail Bord Complete as ENC office Order With All Aspects With All Aspects (Rates are Exclucive GST but Inclucive all other taxes).

Ist Year Maintenace charge @0.00% With All Aspects (Rates are Exclucive GST but Inclucive all other taxes).

IInd Year Maintenace charge @0.75% With All Aspects (Rates are Exclucive GST but Inclucive all other taxes).

IIIrd Year Maintenace charge @1.50% With All Aspects (Rates are Exclucive GST but Inclucive all other taxes).

IVth Year Maintenace charge @2.25% With All Aspects (Rates are Exclucive GST but Inclucive all other taxes).

Vth Year Maintenace charge @3.00% With All Aspects (Rates are Exclucive GST but Inclucive all other taxes).

Please Enable Macros to View BoQ information