REPAIRS MAINT TO PLUMBING, SANITARY FITTINGS AND

Amount

S&F 15mm bore steel water tubing medium grade, galvanized ISI marked with all fittings fixed to wall & ceiling or laid in floors, Including taking down steel tubing or removing from site, complete all as specified and directed by Engineer-in-charge.

All as per item no 1 but 20mm bore

Dismantling existing water tank and removing from site and S&F Rotational moulded PVC water tanks triple layers of 500 Ltr capacity, cylindrical vertical with closed top hoisted and fixed in postion including complete all as specified and directed directed by Engineer-in-charge.

Dismantling existing water tank and removing from site and S&F PVC water tanks triple layers of 200 Ltr capacity, cylindrical vertical or cubide with closed top hoisted and fixed in postion including complete all as specified and directed directed by Engineer-in-charge.

S&F ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed suitable for iron pipe 20mm bore having weight not less than 210 gms complete all as specified and directed by Engineer-in-charge.

S&F in repair gate valves gun metal with iron wheel head screwed both ends for iron pipes and fixed 20mm fixed. complete all as specified and directed by Engineer-in-charge.

Cleaning and removing all scale and dirt etc from tanks and from mouths of circulating pipes etc. of capacity exc 250 ltr and n. exc. 500 ltr, incl write a letter to date of tank cleanining, complete all as specified and directed by Engineer-in -charge

M&L for brick work with subclass B bricks, straight or curved on plan to any radius built in CM 1:6 complete incl demolition of brick work built in CM incl all quoins, pillars etc but excl ashlar facings, dressed stone work and precast concrete all as specified and directed by Engineer-in-charge.

S&F in repair 25 mm dia stainless steel fancy type brackets & stainless steel fancy type finale caps etc including fixing arrangements, complete all as specified and directed by Engineer- in-charge

S&F in repair 25 mm dia stainless steel curtain rods including fixing arrangements, complete all as specified and directed by Engineer- in-charge

S&F in repair PVC waste pipe 32mm bore, 0.90 m long complete all as specified and directed by Engineer-in-charge

Taking down cement plaster of any description on brick or concrete surfaces of walls or ceiling etc incl. raking out joints ,hacking for key and scrubbing down with water upto 4 storeys building, complete all as specified and directed by Engineer-in-charge.

M&L for 15 mm thick cement plaster in cement mortar 1:4 on concrete or brick surface and finished even and smooth w/o using extra cement upto 4 storeys building with water proofing compound complete all as specified and directed by Engineer-in-charge.

M&L for 10 mm thick cement plaster in cement mortar 1:6 on brick surfaces on fair face of brick work and finished even and smooth w/o using extra cement complete all as specified and directed by Engineer-in-charge.

M&L for 5 mm thick cement plaster in cement mortar 1:3 on concrete or brick surface and finished even and smooth w/o using extra cement as in ceiling complete all as specified and directed by Engineer-in-charge.

M&L for preparing surfaces of new plaster Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed by Engineer-in-charge.

M&L for preparing surfaces of old plaster Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm), complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new surface and applying two coat of distemper on wall incl Priming plastered and other surfaces with alkali resistant priming paint over a coat of wall care putty 3mm thick complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old surface and applying two coat of distemper on wall incl Priming plastered and other surfaces with alkali resistant priming paint over a coat of wall care putty 3mm thick complete all as specified and directed by Engineer-in-charge.

M&L for preparation of new surface and applying three coat of white wash on ceiling, complete all as specified and directed by Engineer-in-charge.

M&L for preparation of old surface and applying two coat of white wash on ceiling, complete all as specified and directed by Engineer-in-charge.

Taking down frame or Chowkhats with shutters (without taking off shutters from the frames) of any description not exc. 1.50 Sqm each incl necessary repair to opening with CM 1:4 complete all as specified and directed by Engineer-in-charge.

S&F window/Ventilator section of frame 72 x 55 mm fixed to wall or concrete surface with MS hold fast (30 x 5 mm section) 150 mm long made of galvaniszed steel powder coated and section of shutter 47 x 20 mm, mulion section 72 x 50 mm (base steel as per IS 513 'D' quality galvanzed as per IS 277 with zinc of 120 gms/Sqm) glazed or gauzed and wire gauze shutter prepare to receive wire mesh to the shutter (Double door shutter) with total coated thickness of 0.60 mm including poweder coated grill/guard bars made of square bars 10 mm dia at 150 mm c/c horizontal spacing fixed in MS flat frame (30 x 5 mm) fixed to windows frame with screws, including 4 to 5 mm thick sheet glass, 0.36 mm stainless steel wire cloth with 1.40 mm aperture necessary fittings and all builders hardware such as handles, tower bolts & stays etc complete all as specified and as directed by Engineer-in-charge. Type-4000 series ref drg No CEAF/STD-191/2014 SH1/2&2/2.

S&F Solid PVC Door Frame of size (50x47)mm made out of 5mm single side prelam PVC sheet reinforced with M.S. Square tube, complete all as specified and directed by Engineer-in-charge.

S&F Factory Made Solid PVC Moulded Door Shutter with Particle Board Core, 28 to 30mm thick (stiles), with 2 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm prelam PVC Sheet on back face, complete all as specified and directed by Engineer-in-charge.

S&F 100mm long Butt hinges, medium weight, cold rolled mild steel, and fixed complete all as specified and directed by Engineer-in-charge.

S&F 100mm long Aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and directed by Engineer-in-charge.

S&F 125mm long Aluminium alloy handles of extruded section fabricated type anodised and fixed, complete all as specified and directed by Engineer-in-charge.

S&F in repair Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples, complete all as specified and directed by Engineer-in-charge

Hacking out old broken glass (any thickness size, quility or description complete all as specified and directed by Engineer-in-charge.

S&F 4mm thick Figured glass, pinhead type with oil putty in squares n exc 0.5 sqm each pan complete all as specified and directed by Engineer-in-charge.

Dismantling boarding, any description, fixed in any position, any thickness & any type, complete all as specified and directed by Engineer-in-charge.

S&F in repairs factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side (wall side) and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engineer-in-charge, and as per manufecturer's specifications and drawing.

S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet and cupboards shutter and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engineer-in-charge, and as per manufecturer's specifications and drawing.

S&F in repairs factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer and also manufacturer's test report and test certificate is mandatory with each and every supply of the material complete as per directions of Engineer-in-charge,and as per manufecturer's specifications and drawing.

S&F continous piano hinges, mild steel, bright finish or electrogalvanised of width of flap 30mm complete all as specified and directed by Engineer-in-charge.

M&L for 125 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed by Engineer-in-charge.

S&F of 100 mm Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed by Engineer-in-charge.

Dismantling of floor, hearth or wall tiling including cement mortar bedding/backing etc, removing serviceable tiles to store and rubbish off from the premises (Defence land), complete all as specified and directed by Engineer-in-charge.

M&L for vitrified ceramic tiles (light shades) of 10 mm thick polished area of each tile n.exec.36 Sqm laid as in floors setting and jointed with cement slurry over & including 15 mm thick screed bedding layers of cement sand mortar ( 1:6) and pointed with coloured cement to match with surfaces of tiles complete all as specified and das directed by Engineer-in-Charge.

All as per above item no.41 but on vertical surface such as dado/skirting, including Rendering/backing 10mm thick in CM 1:4 on brick wall surfaces, other than fair faces of brick work finished even and fair to receive tiles, complete all as specified and directed by Engineer-in-charge.

M&L for Non-skid coloured ceramic tiles, 7 to 8mm thick (Square/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floors etc, set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles laid over including 15 mm thick screed bead in CM 1:4, complete all as specified and directed by Engineer-in-charge.

M&L for Glazed ceramic coloured tiles of size (350x250x7)mm/ (450x350x7)mm thick on vertical surface such as in dado/skirting/risers to steps etc set and jointed in neat cement slurry and pointed in white cement with pigment to match the shade of tiles and including 10 mm thick backing coat in CM (1:4) including dismantling of tiles complete all as specified and directed by Engineer-in-charge.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided and inclu removal upto premises (defence land), complete all as specified and directed.

M&L for Cement concrete (1:4:8) type D2 using 40 mm graded aggregate as in foundations, filling and mass concrete, complete all as specified and directed by Engineer-in-charge.

M&L for providing water proofing treatment to RCC sunken slab as specified and directed as under (a) cleaning the existing RCC sunken slab and vertical wal/ RCC beam and hacking the surface. (b) 15 mm thick plastering over floor & vertical surfaces in 1:4 mixed with liquid water profing compound @ 200 per 50 kg of cement troweled to even and smooth finish without using extra cement. (c) Filling the sunken portion with water for 72 hrs and carrying out the ponding test (Any leakage / seepage noticed shall be repaired). (d) Applying two coats of elastometric acrylic water proof coating make Dr. Fixit of pidlite, Tapecrete from Cico or equivalent in sika as per sqm in each coat with roller application (Note each coat of elastomeric acrylic compound reqiuires 6-8 hrs to dry up itself second coat shall be applied on getting the first coat completely dried up. Min quantity required for coating as per manufacture instruction) complete all as specified & directed by Engineer-in-Charge.

Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness below or above ground level, and inclu removal upto premises (defence land), complete all as specified and directed.

M&L for 50 mm thick PCC 1:3:6 type C-2 using 40 mm graded stone aggregate as in plinth protection, path/hardstanding/subbase etc complete all as specified and directed by Engineer-in-charge.

M&L for 50mm thick Cement concrete type D 2, 1:4:8 (40mm graded aggregate) in sub bases, sub floors etc. complete all as specified and directed by Engineer-in-charge.

Dismantling to Stone slabs and tiles of any description or thickness in floors, aprons etc, and incld removal upto premises (defence land), complete all as specified and directed

M&L for rubber moulded chequered tile gloxy finished (Size 30cm x 30cm) x 25mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, with grey cement and color pigment and cut and polished laid over including 15 mm Screed bed or bedding layer of CM 1:4, complete all as specified and directed by Engineer-in-charge

M&L for sand filling under floors or in foundations including watering and consolidation. complete all as specified and directed by Engineer-in-charge

M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade with grey cement and pigment laid, complete all as specified and directed by Engineer-in-charge.

M&L for Green Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble shade. complete all as specified and directed by Engineer-in-charge.

M&L for Pre polished Machine cut kota stone slab flooring 20-22mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab, incl over 15 mm Screed bed or bedding layer of CM 1:4 complete all as specified and directed by engineer in charge

S&F in repairs long body bib taps, cast copper alloy, fancy type with crutchor butterfly handles, chromium plated, screwed down to iron pipes or for brass ferrule of 15mm bore. complete all as specified and directed by Engineer-in-charge.

S&F in repairs angle valve ,stop valve, cast copper alloy, fancy type, chromium plated with crutch or butterfly handle, screwed both ends for iron pipe of 15mm bore. complete all as specified and directed by Engineer-in-charge.

S&F in repairs pillar tap, fancy type,cast copper alloy, chromium plated, with capston heads screwed down, high pressure with or without lettered hot or cold with long screwed shames and fly nuts, screwed for 15mm bore pipe

S&F in repairs fancy type 15mm dia Brass CP wall mixer/basin hole mixer/sink mixer for mixing hot & cold water screwed down for iron pipe complete all as specified and directed by Engineer-in-charge.

S&F in repairs vitreous china wash hand basin of size 550mm x 400mm white, flat back including angle iron brackets with two coats of synthetic enamel paints including PVC waste pipe of 32mm dia of suitable length, PVC connection of 15mm dia & 450mm long with PTMT nuts, and 32mm dia brass waste fitting complete all as specified and directed by Engineer-in-charge.

S&F in repair vitreous china squatting pan “orrisa” pattern of size 580mmx440mm “white” with integral foot rest (excluding flushing cistern and flush pipe) incl provision of cement concrete bedding, ‘P’ trap 110mm dia connection to trap and flushing pipe, anti-syphonage complete all as specified and directed by Engineer-in-charge.

S&F in repairs viterious china wash down water closet pan (Pedestal pattern) white (excluding fixing bolts, flushing cistern and flush pipe) incl P or S trap etc complete all as specified and directed by Engineer-in-charge.

S&F in repair plastic water closet seat, white, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device

S&F in repair PVC flushing cistern of 10 ltr capacity valveless, symphonic action type, flushing cistern, low level, white with inlet, ball valve, float and handle including flush pipe of 32mm bore PVC and connection to pipes etc and taking down existing flushing cistern complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs UPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed by Engineer-in-charge

S&F in repair hand shower (health faucet) with 1.0 m long tube and hook of complete all as specified and directed by Engineer-in-charge.

S&F in repairs 15mm bore PVC connection 600mm long with brass nuts on both ends complete all as specified and directed by Engineer-in-charge.

S&F in repair chromium plated shower rose 125mm size with or without swivel joint and fixed for 15mm bore pipe.

S&F in repair PTMT long body bib tap 15mm dia pipe with crutch or butter fly handle screwed down, screwed for iron pipe and fixed

S&F in repair PTMT stop cock 15mm dia pipe with screwed for iron pipe and fixed

S&F in repair of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, CP Pillar cock, Wash basin mixture, wall mixture and sink mixer etc complete all as specified and directed by Engineer-in-charge.

Taking up or down CI/PVC pipes (incl all fittings), with spigot and socket ends and lead joints incl burning out joints and removing lead of 100/75mm dia pipe complete all as specified and directed by Engineer-in-charge.

S&F PVC (SWR) pipes 110 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc.

S&F PVC SWR bends 110 mm dia .

S&F 110 mm PVC SWR Junction single (Single T) provided with access door.

S&F PVC (SWR) pipes 75 mm single socketed, in any length with solvent cement joints fixed to walls/laid in floors incl stack clamps of stainless steel with bolts & nuts etc.

S&F PVC SWR bends 75 mm dia .

S&F 75 mm PVC SWR Junction single (Single T) provided with access door.

S&F in repair PVC (SWR) floor trap, size 75mm, plain with grating including jointing with solvent cement, complete all as specified and directed by Engineer-in-charge.

S&F in repair corner glass shelf with bracket complete all as specified and directed by Engineer-in-charge.

S&F in repairs S/steel cloth hanging hooks set of six hooks complete all as specified and directed by Engineer-in-charge.

M&L in repair with welding work for Hinges, Handle or Framed/shutters work such as to MS Window/ventilators, MS doors etc (Area n exce 1.5 sqm each), complete all as specified and directed

M&L in repair with welding work for Hinges, Handle or Framed/shutters work such as to MS Window/ventilators, MS doors etc (Area exc1.5 sqm n exce 4.5 sqm each), complete all as specified and directed

Dismantling wrought iron or mild steel work of any description not otherwise provided for

S&F for Framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165

M&L for Preparation of new steel surfaces and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by Engineer-in-charge

Ashish Sehgal and Co.

Rishi Constructions

SM CONSTRUCTION COMPANY

GIR RAJ BUILDERS

High Tech Metal India

Mahesh Enterprises

OMVIN ENTERPRISES LLP