Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.5 LAccepted-AOC | L1 | Accepted-AOC Awarded | |
| 2 | L2₹29.9 L+₹3.6 L (13.7%)Rejected-Finance | L2 | Rejected-Finance Rejected | |
| 3 | L3₹33.8 L+₹7.6 L (28.8%)Rejected-Finance | L3 | Rejected-Finance Rejected | |
| 4 | L4₹36.9 L+₹10.6 L (40.3%)Rejected-Finance RZ 55 1ST FLOOR MOHAN NAGAR PANKHA ROAD NEW DELHI 110046 | NEW DELHI | NEW DELHI | DELHI | 110046 | L4 | Rejected-Finance Rejected | |
| 5 | L5₹42.5 L+₹16.2 L (61.8%)Rejected-Finance | L5 | Rejected-Finance Rejected |
Tender Value
₹43.4 L
EMD Value
₹86,740
Closing Date
17 May 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE AF Subroto Park
GE AF Subroto Park c o 56 APO
IMPROVEMENT OF SMQ C BLOCK OF SGT AND BELOW (MAP QTRS) OF HQ WAC(U) AT SUBROTO PARK
2023_MES_590772_1
GE/SP/ TOKEN-03/2023-24
Open Tender
Civil Works
Item Rate
180 days
GE (AF) Subroto Park
Please refer Tender documents.
10 documents required · 10 mandatory
₹500
GE AF Subroto Park
₹86,740
Yes
30 Jun 2023
21 Apr 2023
24 May 2023
21 Apr 2023
17 May 2023
5 May 2023
Amount
Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15 cm thickness( below or above ground floor).
M&L for PCC (1:5:10) type E-2 using 40 mm graded brick aggregate as in sunken portion complete all as specified and as directed
M & L for cleaning the sunken floor surfaces by wire brushes, brooming, removing dust by dismantling of floor, lime terracing and applying following :- (a) 10 mm thick screed bed in cement mortar 1:3 complete mixed with water proofing compound as per manufacturers instructions complete all as specified and directed. (b) Bitumen primer confirming to IS-3384-1965 @ 0.50 Kg Per sqm. (c) Applying a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm confirming to IS - 702-1998 for water proofing membrane. (d) Applying of polymeric water proofing membrane weight not less than 3 Kg/Sqm over entire are with overlaps and sealed all as specified directed. (e) Again applying a tack coat of hot blown bitumen 85/25 @ 1.2 Kg/Sqm over water proofing membrane. (e) Dusting dry sand @ 0.75 Kg Per Sqm over water proofing membrane.
Supply only integral water proofing compound complete all as specified and as directed.
S&F in repair 32 mm dia tubes galvanised iron spout light grade for sunken portion complete all specified and as directed.
S&F in repair vitreous chaina squatting pan ORISSA pattern size of 580 x 440 mm white with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe etc including making good to floor complete all as specified
Taking down cement plaster etc on brick wall or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc and disposed off unserviceable materials to out side MOD land complete all as specified and as directed.
M&L 12 mm thick cement mortar 1:6 on unven surface of brick work or concrete surfaces on wall surface even and smooth without using any extra cement.
M&L for rendering 10mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling, complete all as specified and as directed.
M&L 15 mm thick cement mortar 1:4 on other than fair faces of brick work or concrete surfaces on wall surface even and smooth without using any extra cement
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engr in Charge.
M&L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tiles exc 0.06 sqm but n. exc 0.11 sqm, in floors or dado etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.
M&L non skid ceramic coloured tiles 10 mm thick (square/rectangular) area of each tiles exc 0.11 sqm but n. exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match over 15 mm thick screed bed or bedding layer in cm (1:4) complete all as specified and directed.
M&L Glazed coloured ceramic tiles in vertical surface/ dado 450X 300X 7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over 10 mm thick rendering in cement mortar 1:4 complete all as specified and directed.
M&L Green marble 18-20 mm thick machine cut , bedded jointed and pointed with grey cement slurry including cutting and polishing Complete all as specified and as directed.
S&F in repair kitchen sinks of bowl size 410mm x 330 mm made of stainless steel 1 mm thick with waste cupling and waste pipe.
Taking down door chowkats or frames with shutters, any type (without taking off shutters from the frame) area not exceeding 1.50 sqm
Taking down door chowkats or frames with shutters, any type (without taking off shutters from the frame) area not exceeding 1.5 sqm but n.exc 4.0 sqm )
Taking down shutters of any description exc 1 sqm but n.exc 2.0 sqm each and removal store
S&F pressed steel frames for doors with one or morerivets including neccesary fixing lugs, hinges, lock strike plate etc of size 105 x 60mm filling with 1:3:6 PCC complete all as specified and as directed.
S&F pressed steel frames for doors with one or morerivets including neccesary fixing lugs, hinges, lock strike plate etc of size 165 x 60mm filling with 1:3:6 PCC complete all as specified and as directed.
S&F 35mm thick flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and as directed.
S&F 2nd class HW glazed and skelton 35mm thick shutters, open rebated and prepared to receive glass gauze etc (with out sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass. Gauze etc and all as spe
S&F Floor door stopper of aluminium alloy body confirming to Fe-290 Gde-165 and tongue, anodised, with hard drawn steel spring, fixed in floor
M&L 18/19 mm thick pre-laminated particle board interior grade pre-laminated one side with decorative choice laminating & other side balancing white lamination fixed with screw to angle frame work for cupboard shutter and shelves including taking down old one.
M&L 18/19 mm thick pre-laminated particle board interior grade both sides balancing white lamination fixed with screw to angle frame work for cupboard shutter and shelves including taking down old one.
M&L for external teak wood lipping 12 mm thick fixed with nails on external edges of pre-laminated particle boards complete all as specified and directed at site
S&F continous piano hinges, mild steel, bright finish or electro galvanised of width of flap 30mm
M &L for 125 mm magnetic catches with brass body and striking plate including letting in and fixed.
S&F for 125 mm size of hasp & staple safety type aluminium anodised with mild steel hinge pin including bolt to heinge plate and fixed with screws complete all as specified and directed at site
S&F for galvanised rigid steel conduit 20 mm ext dia pipe for hanger rods in repairs including necessary arrangement to fixed in cup board complete all as specified and directed at site
Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for dual shutter i.e. inner and outer shutter with grill, glazed and wire mess shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(4000 series) NOTE: (i) Glazed shutter with 4.00 mm thick glass, mesh shutter with 32 gauge stainless mesh and MS grill as per srl no 10,11 and 13 of notes of above mentioned drawing is deemed to be inclusive in the rate quoted for unit (ii) Glass, stainless teel mesh will be fixed to window by authorised rep of manufacturer of window only. Rate including taking down of windows and making good the surface.
Supply and fixing in repair windows/ ventilators fabricated from 0.60mm thick roll formed section made of galvanised steel powder coated (Base steel as per IS-513"D" quality) galvanised as per IS-277 with ZINC of 120GM/SQM . Windows /ventilators having frame suitable for single shutter with grill, glazed shutter and all fitting, fixtures accessories incl 6mmx12mm flat iron with 10mm square bar M.S. grills complete as specified and shown in drawing No CEAF/STD-191/2014, sheet 1/2 & 2/2 dated 11.12.14(3000 series) NOTE: (i) Glazed shutter with 4.00 mm thick frosted/plain glass, mesh shutter with 32 gauge stainless mesh and MS grill as per srl no 10,11 and 13 of notes of above mentioned drawing is deemed to be inclusive in the rate quoted for unit (ii) Glass, stainless teel mesh will be fixed to window/ventilator by authorised rep of manufacturer of window/ventilator only. Rate including taking down of windows and making good the surface
S&F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples.
S&F in repair stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with SS wire staples.
S&F factory made solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with mild steel square tube complete as per manufacturer’s specification & drawing and as directed.
S & F factory made solid panel PVC door shutter 30mm thick (Style) consisting of frame made out of MS tubes for top and bottoms rails MS frame shall be covered with heat moulded plain colour PVC C Chennel having a PVC sheet strip of 20 MM width stuckin side with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail in either side and as gep insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded and sealed to the styles and rail with suitable PVC sheet beading and joint together with solvent cement .
Supply only Butt hinges,medium wt, cold rolled, mild steel of size 100mm.
S&F Aluminium alloy, anodised, sliding door bolt 300mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy.
S&F 200 mm length aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.
S&F 150 mm size aluminium handle, cast type anodized complete all as specified and as directed.
Taking up or down 15mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and as directed.
Taking up or down 20 mm bore steel tubing and connections, including cleaning for re- fixing or removal to store complete all as specified and as directed.
S&F 15 mm bore steel tubing galvanized medium grade with all fittings and fixed concealed to walls and ceiling or laid in floors complete all as specified and as directed.
S&F 20 mm bore steel tubing galvanized medium grade with all fittings and fixed concealed to walls and ceiling or laid in floors complete all as specified and as directed.
S&F in repair brass chromium plated shower rose 125 mm size with swivel joints including fixing to pipe complete all as directed
S&F in repair 15 mm dia bore CP wall mixture with all accessories complete all as specified and as directed.
S&F in repair 15 mm dia bib taps, cast copper alloy chromium plated with crutch or butterfly handle screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.
S&F in repair 15 mm dia stop valves cast copper alloy chromium plated, screwed down, high pressure with crutch or butterfly handle, concealed type, screwed both ends for iron pipe or for union and fixed complete all as specified and as directed.
S & F in repair for 15 mm bore angle valve cast screwed down, high pressure, with crutch or butter fly handle, for iron pipe or for unions complete all as specified and directed.
S&F in repairs CP grating round 100mm dia with hole complete all as specified and as directed.
S&F in repair PVC flushing cistern, valveless, symphonic action type, 10 Ltr capacity, low level, white, with inlet, ball valve, float and handle including bracket complete all as specified and as directed.
S&F in repair PVC connection of 45 cm long with 2 Nos PTMT side nuts screwed with iron pipe of 15 mm dia complete all as specified and as directed.
S&F stainless steel soap dish, any type, fixed to plugs with chromium plated brass screws embedded in wall complete all as specified and as directed.
S&F in repair vitreous china WHB white, flat back, size 550 x 400mm including brackets ,cupling and all accessories etc complete all as specified and as directed
S&F C.P tubular Towel rail 20 mm dia, D type 60 cm long.
S&F in repair wash hand basin CP mixture with capstan heads, chromium plated, with or W/O lettered Hot or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed 15mm bore.
Hacking out old broken glass (any thickness, size, quality or description) from wooden/ Steel /Aluminium frames glazed with putty or fixed with bead. (Old bead to be reused to fix glass) complete all as specified and directed.
S & F corner glass shelf with bracket of Make-BEA-46 of Prayag or equivelent complete all as specified and directed.
S & F front glass shelf with bracket of Make-BEA-46 of Prayag or equivelent complete all as specified and directed.
S&F in repairs 32mm bore and 75cm long PVC flexible waste pipe for WHB complete all as specified and as directed by Engineer-in-Charge.
S&F in repair curtain rods with mild steel conduit pipe 20 mm bore PVC coated of 1 mm thick including temples, brackets etc complete all as specified and directed by Engineer-in-Charge
M &L two coats of synthetic enamel paint over a coat of pink primer including prepration of newly wooden surfaces.
M&L one coat of synthetic enamel paint including prepration of old wooden surfaces.
M&L one coat of synthetic enamel paint including prepration of old steel surfaces.
M & L Preparation of newly plastered or unplastered surface and applying two coats of distemper oil emulsion over a one coat of primer on walls complete all as specified.
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply Two coats of distemper oil emulsion on walls complete all as specified.
M & L preparation of newly plastered surface and applying three coats of white wash on ceilings
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of white wash on ceilings
M&L for preparation of newly plastered or concrete surfaces of wall and applying two coat of cement base paint over a coat of lime wash complete all as specified and directed.
M&L for complete removal of existing treatment of old decorated surfaces of walls by steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and washing, rubbing down and stoping of existing surface and making the surface even and smooth and apply two coats of cement base paint over and including a coat of primer complete all as specified and as directed by Engr-in-Charge.
M & L for PCC 1:2:4 type B1 (20 mm graded aggregate) as in bed for pvc water tank, roof kerbs benching rounded or chamfered on edge all as specified complete all as directed at site.
M & L for 75 mm thick PCC 1:3:6 type C2 as in Plinth Protection using 40 mm stone aggregate including making joints & filling with sand bitumen mastic.
S&F SS 900x800 plate rack fixed in posn including all necessary fittings all as specified and directed by Engr In- Charge
M&L for repair to broken sides/bottom of roof projection, facia, column, chajja etc by all means i.e. either by cement plaster of any thickness or by cement concrete 1:1.5:3, type A-0, using 12.5 mm graded stone aggregate etc, using chicken wire mesh to reinforce & form work as required with two coat of cement base paint complete all as specified and as directed by the Engineer-in-Charge.
M&L for screed bed or bedding layer of mortar 20 mm thick in CM 1:4 for laying floor finishes complete all as specified and directed.
M & L for machine cut kota stone slab flooring 20-25 mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror polish
M/L for machine cut kota stone slab 25mm thick as in riser of steps, skirtings, dados etc over 10 mm thick cement screed in cm (1:6) jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing to achieve mirror polish
Taking down rainwater pipes (any Size or pattern), including all fittings, including cleaning or refixing or removal to store (measured overall as fixed along the centre line over fittings and accessories
S&F PVC (SWR) pipes of 110 mm bore single socketed, in any length with rubber ring joints, fixed with walls or trenches.
S&F PVC (SWR) bends any radius for 110 mm bore PVC pipe with cement joints complete all as specified and as directed.
S&F PVC (SWR) junction single,(Single T) equal or unequal (Supplied and fixed bore of pipe in 110mm)
S& F 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints, laid in trenches or in floors etc complete all as specified and directed by Engr - in- charge.
S&F in repair PVC (SWR) bends any radius for 75 mm bore PVC pipe with cement joints complete all as specified and as directed.
S&F PVC (SWR) junction single,(Single T) equal or unequal (Supplied and fixed bore of pipe in 75mm)
S&F in repair PVC (SWR) floor trap 75mm with grating including jointing with solvent
Demolition of any type of roof treament (i.e App membrance, brick tiles, mud phuska, cement concrete/ lime concrete etc ) from roof any thickness including leaping plaster including removing the demolished material from roof out side defence land complete all as specified and directed by Engineer-in-Charge.
M & L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing of APP membrane finished even and fair using WPC..
M&L for five layer prefabricated atactic polypropylene polymer (APP) modified 3 mm thick membrane ( weight not less 3 kg/sqm) reinforced with 160 gms polester non-woven fabric with scratched tool before finishing roof surface. When the concrete surface is still green, the roof surface shall be throughly wire brushed washed dried up and cleaned of all foreign matter and dust prior to the application of primer on the dried surface one coat of approved bituminous primer, having density in the range of 0.87 to 0.89 / kg at 25 dgree and viscositing of 70 to 160 CPS manufactured by the same manufacturer @ 0.40 litres/sqm shall be applied. APP membrane shall be laid on primed surface tourch application mehtod after allowing 24 hours of primer to dry. Laying of APP membrane shall be commneced at the lowest level and worked upto the crest.APP membrane will normally be laid in length at right angle to the direction of slope. The overlaps shall be of minimum 100 mm on longitudinal direction and 150mm on the transverse direction. All overlaps shall be bonded with bitumen primer and levelled by the heating the overlaps with brutane tourch. This treatment shall be done by the approved authorised applicator. Guarantee of treatment shal be for 10 years. Thereafter APP membrane shall be painting with two coat of water proofing paint with aluminium finish. (ii) Independent testing of membrane for the approval technical parameters specified hereinafter shall be carried out the approved laboratories like National test house any other Govt approved laboratory having facilities for the testing of membrane.
S&F in repair to rotational moulded vertical water storage tanks triple layer ( White colour) with closed tops ( cylindrical ) hoisted and fixed in position 500 litre capacity including disconnecting and refixing the existing GI fitting and pipe complete all as specified and directed by Engineer-in-Charge.
S&F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends internally IS-778 marked, Class-2, make : Zoloto / Leader or equivalent for iron pipe of size 20 mm bore complete all as specified and directed.
Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars, precast concrete blocks etc.
M & L for brick work with sub-class `B' bricks old size, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:4.
M&L for Brickwork with sub- class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4 complete all as specified and directed.
M&L for post Anti Termite Treatment of soil under existing floors using emulsion @ 01 litre / hole, 300mm apart including drilling & plugging 12mm dia holes with CM(1:2) to match the existing floors
M&L for post Anti Termite Treating the soil under plinth protection @ 5 litres of emulsion / Sqm of surface area
M &L post Anti termite treatment along the external wall below concrete or masonry apron and wooden joinery using chemical emulsion @ 2.25 litres / m including drilling & plugging holes etc. in apron.
Removing of IGL Gas meter line & refixing the same after tiling works complete all as specified and directed by Engr In Charge. Note: Necessary permission directly obtain from IGL for removal of gas meter after stoping the gas supply and reconnection of the same after completion of repair work in the buildings by the Contractor.
S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.One side prelam and other side plain 18mm thick Celuka PVC ply for kitchen cabinet shutter
S&F factory made 18mm(+0.7mm) thik celuka PVC Ply of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 18mm thick Celuka PVC Ply for Shelf/Partitions/Drawer
S&F factory made 5mm thik PVC sheet of density 600kg/cbm manufactured by an ISO-900-2008 certified company.Plain 5mm thick PVC sheet paneling for back side(wall side)
S&F 100 mm size Stainless Steel handle complete all as specified and as directed.
M &L for 50 mm magnetic catches with brass body and striking plate including letting in and fixed complete all as specified and directed.
S&F 38mm size Stainless Steel Piano hinges complete all as specified and as directed.
Taking down carefully copper/aluminium point wiring light ,fan, light fittings,socket or power complete, such as switches, ceiling roses, pendents, regulators, sockets etc.removing materials to store for keeping in safe costudy or for taking credit (credit for above items should be made as per conditioned separately) and making good disturbed surface of walls, floors etc. complete all as specified and directed by Engineer-in-Charge.
M&L for point wiring with single core PVC insulated unsheathed 1100 volt grade cable with multi strand copper conductor of size 1.5 Sq mm FRLS (Nominal area) drawn through and including non metallic rigid PVC concealed conduit, medium grade, ISI marked not less than 20mm dia, concealed in wall, ceiling with GI saddles GI screws, rawl plugs (concealed conduit wiring) with all fittings including Tee, Junction boxes and provision of pressed steel terminal modular box powder coated of suitable size for mounting switch sockets and regulators and drawing continuous earth wire of PVC insulated unsheathed 1100 Volts grade cable with stranded copper conductor of size 1.5 Sq mm (Nominal area) complete all as specified. Note: Cost for cutting, chasing and making good to existing surfaces are deemed to be included in the Quoted Rate. (a) For one light point controlled by one SP switch
(b) For one fan/exhaust fan and wall mounted fan point controlled by one SP switch.
(c) For one light point controlled by two 2 - way SP switches
(c) For one bell point controlled by one No bell push
All as per item No-108 above but for one 3 pin socket out let, 6 Amps on same board with the cable 1.5 Sqmm size.
All as per item No-108 above but for one 3 pin socket out let, 6 Amps on Independent board with the cable 1.5 Sqmm size.
All as per item No 108 above but with 2.5 Sq mm cable for Independent bd one 3 pin 15 Amps socket outlet including S/C 1.5 Sq mm PVC insulated copper conductor unsheathed 1100 v grade IS -694 FR LS cable for continuous earth wire connected to gang box of required size all as specified and directed by Engineer-in-Charge.
S&F switch piano 5 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet flush type 5 pin 6 amps suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fix switch piano 5 Amps flush type single pole two way suitable for 240 volt AC
S&F switch piano 16 amps flush type single pole one way suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
S&F socket outlet 2 in 1, 5 pin 16 amps flush type suitable for 240 volt AC Complete all as specified and directed by Engineer-in-Charge.
Supply and fix bell push flush type 5 Amps suitable for 240 volt
Supply and fix bell AC 240 volt ding dong type
Supply and fix electronic Fan Regulator rotary flush step type 120 watt, 240 volt complete .
Supply and fixing of ceiling roses, surface bakelite 65x50mm 2 or 3 terminals , PVC/Polycarbonate, isolated body fixed on PVC round block complete all as specified and directed by Engineer-In- Charge.
Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver, 20 watt LED fitting, 4000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.
Supply and fixing wall mounted LED batten extruded aluminium heat shrink provided for efficient heat dissipation and integrated electronic driver ,10 watt LED fitting with 100 lumen/watt, 6000K , 230 Volts, diffused optics ,etc complete with all accessories , connecting up with twin core twisted flexible copper conductor cable from ceiling rose to fitting, and testing complete all as specified and directed by the Engineer- In- Charge.
S &F Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings
S &F LED Bulb 10W all as specified and directed by Engineer-in-Charge.
Supply and fixing in replacement LED security light fitting 60 watt high pressure dia cast aluminium housing and secondary optical lens for superior light distribution , heat resistant thoughened glass with frame, IP66 protection complete with lamp & connected item and connection with suitable cable from ceiling rose to light fitting and fixing on GI bracket made out of suaitable GI Pipe medium garde 1.2 mtr long bent to shape and fixed on wall with flat iron clamps, nuts bolts washer etc all as specified and directed
Taking down including disconnecting the electric connection of ceiling fan and dismantling blades,greasing complete all as specified and directed
M&L for repairing of ceiling fan (including change of bearings/windings with super enamelled copper wire of same size ) replacement of suitable capacity of condenser and testing complete all as specified and directed by Engineer in Charge.
Hanging / fixing only ceiling fan received from item No 20 and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete.
Taking down including disconnecting the electric connection of exhaust fan and dismantling blades,greasing and painting the whole assembly complete all as specified and directed
M&L for repairing of exhaust fan (including change of bearings/windings with super enamelled copper wire of same size ) replacement of suitable capacity of condenser and testing complete all as specified and directed by Engineer in Charge.
Fixing only Exhaust fan received from item No 22 and connecting up including fastner and provision of suitable size of copper cable from connector of fans to ceiling rose complete.
M & L for submain wiring with three run of 4.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 4.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified - 2 Runs of 4.0 Sqmm single core and one run of 4.0 sqmm single core cable.
M & L for in submain wiring with three run of 10.0 sqmm single core PVC insulated but unsheathed FRLS cable of specified size of multistranded copper conductor 1100 volts grade IS:694 marked and one run of 6.0 sqmm PVC insulated but unsheathed FRLS cable for earth continuty conductordrawn through and under suitable size of rigid non metallic PVC conduit , medium grade, ISI marked ( not less than 20 mm dia) complete with all acessories and fittings all laid/fixed concealed in wall/ceiling or surface in wall and surface conduit on ceiling, and also include the specified runs of specified size earth continuity conductor of similar type cable complete all as specified - 2 Runs of 10.0 Sqmm single core and one run of 10.0 sqmm single core cable.
Taking down unserviceable submain wiring two runs of any size cable including batten/conduit complete etc and making good distrub surfaces complete all as specified and directed.
Supply and fixing MCB distribution board with Bus bar 200A neutral link , earth bar made out of CRCA mild steel sheet surface mounting SPN 8 way 230 volts double door type regal gray horizontal type complete all as specified and as directed by Engineer-in-Charge. Note :- MCB shall be measured and paid seperately.
Taking down old unsv MCB DB of any size.
M&L for earthing complete with GI earth plate electrode 60cmx60cmx6.0 mm thick buried directly in ground (earth pit not less than 2.25 meter deep below normal ground level) with top edge of the plate not less than 1.5 meter below normal ground level, connected to and including galvanized iron strip 4 mm dia as earth lead by means of GI bolts, nuts, check nuts and washers earth pit surrounded by picked layer of coal dust and 15 mm thick mixture in equal ratio of magnesium sulphate & copper sulphate in all around bottom and top and watering pipe 20mm bore of GI medium grade with funnel all as shown in electrical plate NO 5 of SSR Part I (1991) and connecting to earthing test point, including CI cover, frame and PCC (1:3:6) type C-2 using 20mm graded stone aggregate as in earthing pit with CI cover and framing including necessary earth work etc, complete all as specified Note :- PCC chamber shall be constructed at least one meter away from building shall be provided in slanting manner.
M&L in replacement of earth contuinity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required 4 mm dia galvanized iron or steel wire complete all as specified and directed by Engineer-in-Charge.
Taking down unserviceable SP/SPN MCBs of any capacities from the MCCB DBs /MCB DBs after disconnecting the electric supply,complete all as specified.
S&F MCB SP 6 to 32 Amps 10 KA, 240 volt 'C' Series all as specified and directed by engineer-in-charge.
S&F MCB SP 40 Amps 10 KA, 240 volt 'B' Series all as specified and directed by engineer-in-charge.
S&F MCB SPN 40 Amps 10 KA, 240 volt 50 HZ 'C' Series all as specified and directed by engineer-in-charge.
Supply and fixed Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified and directed.
M&L for taking down existing geyser carefully of any capacity without damaging from bathroom and to be kept in safe custody untill completion of finishing work and re-fixing the same after completion of work, complete all as specified and as directed by Engr in charge.
Supply and fixing in replacement LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed by Engineer-in-Charge.
Supply and fix exhaust fan, steel body AC single Phase. 230V of size 300mm sweep with, blades, and frame and louvers complete all as specified and directed.
Supply and fixing in replacement round shape 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders,LED lamp suitable for roof ceiling including connecting up with three core flexible copper conductor cable of suitable size complete all as specified.
GIR RAJ BUILDERS
shakti construction
Ashish Sehgal and Co.
Mahesh Enterprises
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .