REPAIRS TO PLUMBING JOINERY FLOORING MANHOLE SEPTIC TANK DRAIN CONCERTINA COIL AND MISC WORK AT DHQ 7 AND CGRA PARADIP UNDER GE I CG BHUBANESWAR

Amount

Taking down cement plaster on brick or stone wall etc including racking out joints hacking for key scrubbing down with water etc complete all as specified and directed.

Demolition of brick work built in cement mortar or cement lime mortar as in manholes/septic tanks etc complete all as specified and directed.

M & L Brick work with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M & L Brickwork with flyash bricks,straight or curved on plan to any radius half brick thick wall,built in Cement mortar (1:6) complete all as specified and directed.

M & L for rendering 5mm thick cement plaster in cement mortar 1:3 on ceiling including finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 10mm thick cement plaster in cement mortar 1:6 on fair faces brick or concrete surfaces of wall including finished even and smooth without using extra cement complete all as specified and directed.

M & L for rendering 15mm thick cement plaster in cement mortar 1:4 on fair faces brick or concrete surfaces using water proofing compound of wall including finished even and smooth without using extra cement complete all as specified and directed. (Note:WPC shall be paid separately and extra qty taken for plastering of brick work).

Supply only liquid water proofing compound complete all as specified and directed. Make : Pidilite/Fosroc.

M & L for preparation of new plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

M & L for preparation of new plastered surfaces of walls and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of oil bound distemper over a coat of chalk whitening primer on walls complete all as specified and directed.

Material and labour for preparation of new plastered surfaces and applying two coats of oil bound cement based paint over a coat of alkali resistant primer on walls complete all as specified and directed.

M&L preparation of old plastered surfaces as in walls, soffits & facias of beam ,chajjas etc applying two coats of weather proof Acrylic based paint (100% Acrylic) over a coat of primer complete all as specified and directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for screed or bedding layer 15 mm thick in cement mortar 1:4 laying floor finishes complete all as specified and directed.

M & L for Rendering 10mm thick in cement mortar (1:4) for laying skirting/dado on walls etc complete all as specified and directed.

M & L for Non skid ceramic coloured joint free/rectified tiles 7 to 8mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n.exc 0.18 sqm, in floors in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L for glazed ceramic joint free colored tiles,(400x400x 7) mm thick in floors, set and jointed cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

M & L Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match all as specified and as directed.

M & L Virified Ceramic tiles (Light shade)10 mm thick (square/ rectangular)polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M & L for 20mm Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointingin white cement (1:2) using marble dust with admixtureof pigment to match with shade of granite complete all as specified and directed.

Renewing tiles in patches, area n exc 5 sq.m. including removing and cleaning old tiles, preparing beds and laying or setting, jointing and pointing new or old tiles complete all as specified and directed.

Hacking out old broken glass (any thickness size quality or description) from metal /wooden/aluminium frames complete all as specified and directed.

S & F for sheet glass 4mm thick ordinary quality and glazing with oil putty/wooden beading in squares n.exc 0.50sqm in each pane complete all as specified and directed.

S & F rubber beading 10 mm width 6 mm thick for fixing aluminium glasses complete all as specified and directed.

S & F for 4mm thick frosted on one side glass, pin headed type and glazing with oil putty/wooden beading in squares n.exc 0.50sqm in each pane complete all as specified and directed.

Taking down chowkats or frames with shutter not exc1.50 sqm (without taking of shutters from the frame).\ complete all as specified and directed.

Taking down chowkats of frames with shutter exceeding 1.50 sqm and not exceeding 4 sqm (without taking of shutter from frame) each of any description any type complete all as specified and directed.

Taking down shutters of any description n exc 1 sqm each complete all as specified and directed.

Taking down shutters of any description exc 1sqm n exc 2 sqm each complete all as specified and directed.

Taking down shutters of any description n exc 1 Sqm each and refixing in same opening after easing and adjusting complete in aluminium/wooden door shutter complete all as specified and directed.

All as per item No 31 above but exc 1 sq. m and n exc 2 sq. m each

Cutting holes in brick walls built in cement mortar for inserting hold fasts & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1, depth of embedded portion of hold fasts or lugs measured from the face of the jamb into the wall exc half brick but n.exc one brick complete all as specified and directed.

S & F 25 x 5 mm flat iron as in hold fast for fixing wooden door frame complete all as specified and directed.

S & F solid PVC door frame of size 50 mm x 47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube, supplying and fixing in opening as per specification and drawing complete all as specified and directed.

S & F factory made solid PVC moulded door shutter with particle board core shutter 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front face and 2 mm plain colour PVC sheet on back face in frame at site as per specification and drawing complete all as specified and directed.

S & F 2nd class HW Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints complete all as specified and directed.

S & F 35 mm 2nd class HW plain framed panelled shutters with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and styles as per SSR 2009 (Part-I) , kiln seasoned and chemically pressure treated, complete all as specifed and as directed.

S & F 35 mm thick 2nd class hardwood Glazed and skeleton wooden shutters, open rebated and prepared to receive glass, gauze, etc.divided into square with plain, chamfered or rounded. and rebated sash bars any numbers of framing plain chamfered or rounded fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR PartI, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S & F for second class hard-wood Small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like, including all necessary' labours; articles n exc 200 cu. cm each complete all as specified and directed.

S&F Beads, straight (any size) for glazed or gauzed joinery, renewed, including mitres etc and removing old beads to Store of 1st class hard wood complete all as specified and directed.

M & L Plywood, grade BWR type BB, fixed with screws to timber frame work of 6 mm thick complete as directed and as specified.

M & L in repairs Prelaminated particle board 18/19 mm thick, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work complete all as directed and as specified.

S & F in repairs Hasp and staple, mild steel, wire type, aluminium anodised, including bolt to hinge plate and fixed with screws of size 100 mm ISI mark complete all as specified and directed.

S & F in repairs Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm ISI mark complete all as directed and as specified.

S & F Aluminium handles,150mm cast type, anodised ISI mark complete all as specified and directed.

S & F 200 mm long barrel tower bolt of exturded section aluminium anodised ISI mark complete all as specified and directed.

S & F 125 mm long barrel tower bolt of exturded section aluminium anodised ISI mark complete all as specified and directed.

S & F 100 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 ISI mark complete all as specifed and as directed.

S & F 75 mm butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type C-21 , ISI mark complete all as specifed and as directed.

S & F Aluminium alloy anodised Sliding bolt 300mm long with hasp, staple(bolt type and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ISI mark complete all as specified and directed.

S & F in repairs Aluminium handles,150mm cast type, anodised ISI mark complete all as specified and directed.

S & F in repairs 200 mm long barrel tower bolt of exturded section aluminium anodised ISI mark complete all as specified and directed.

S & F in repairs Aluminium alloy anodised Sliding bolt 300mm long with hasp, staple(bolt type and fixing clips of sheet, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy ISI mark complete all as specified and directed.

S & F in repairs for providing 20mm dia stainless steel curtain rods including necessary brackets fittings etc complete for doors and windows complete all as specified and directed.

Preparation of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coat of Synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S & F in repairs 15mm bore Pillar taps, cast copper heads, capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete as per SSR Pt I complete all as specified and directed.

S & F in repairs bip taps 15mm chromium plated fancy type with crutch or butterfly handle, screw down for iron pipe or for brass ferrule complete as per SSR Pt I complete all as specified and directed. (Make:Jaquar)

S & F in repairs stop valves 15mm , chromium plated, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or unions and fixed complete as per SSR Pt I complete all as specified and directed.

All as per item No 59 above but chromium plated fancy type with long shank and cup concealed type in repairs all as per SSR Pt I

S & F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F CP waste coupling of any size (half or full threaded) (minimum weight 32mm-45gms/40mm-60gms) complete all as specified and directed.

S & F in repairs PVC waste pipe, 32 mm dia for WHB or sink complete all as specified and directed.

S & F in repairs PVC valveless, syphonic action type flushing cistern 10 ltr capacity low level white with inlet ballvalve float and handle including brackets complete all as specified and directed.

S & F in repairs vitreous China wash basin , white, flat back, size 550 x 400mm including waste fittings, brass, Cromium plated with long screwed shanks and fly-nuts, flanged end bedded in red lead cement and other end fixed and brackets including cutting for and pinning in ends of brackets or erecting stand etc. complete all as specified and directed. (Make:Parryware)

S & F in repairs Vitreous china squatting pan Orrisa pattern white/coloured of size (630 X 450) mm with integral foot rest with P or S trap excluding flushing cistern and flush pipe complete all as specified and directed.

S&F in repairs Vitreous China wash down water closet pan ( pedestal pattern) , white (excluding fixing bolts, flushing cistern and flush pipe) including connection to drain and to flushing pipe , anti syphonage pipe complete fixed complete all as specified and directed.

S & F in repairs plastic water closet seat, white , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device of approved make as per sample approved complete all as specified and directed.

S&F in repairs brass chromium plated shower rose 125 mm size all as per SSR Pt I complete all as specified and directed.

S & F in repairs flush pipe of polyethylene of high density or PVC 32 mm dia for low level cistern complete all as specified and directed.

S & F in repairs chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S & F stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed with stainless steel wire staples complete all as specified and directed.

S & F in repairs stainless steel wire cloth.0.36mm nominal dia of wire and average width of aperture1.40mm and fixed withstainless steel wire staples complete all as specified and directed.

S&F in repairs sinks with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed

Taking up or down steel tubing and connections, 15mm bore including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connections, 20mm bore including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down steel tubing and connections, 25mm bore including cleaning for refixing or removal to store complete all as specified and directed.

Refixing old steel tubing and connections 15mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and directed.

Refixing old steel tubing and connections 20mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and directed.

Refixing old steel tubing and connections 25mm bore in new or old position (valve, ceiling , floors) etc complete all as specified and directed.

S & F tubes 15mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F tubes 20mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F tubes 25mm bore, medium grade galvanised with all fittings fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

S & F in repairs gun metal globe or gate valves 20mm bore with iron wheel head screwed both ends for iron pipe complete all as specified and as directed .

Dismantling of water tank capacity of exc 250 litre but not exc 500 litre each complete all as specified and directed.

Dismantling of water tank capacity of exc 500 litre but not exc 1000 litre each complete all as specified and directed.

M & L for Rotational moulded polythylene water storage tanks 500 litre capacity (cyclindrical vertical with closed tops) hoisted and fixed in position all as specified in SSR part -I complete all as specified and directed..

M & L for Rotational moulded polythylene water storage tanks 1000 litre capacity (cyclindrical vertical with closed tops) hoisted and fixed in position all as specified in SSR part -I complete all as specified and directed.

Disconnecting existing tanks exc 500 & n. exc1000 litres capacity , setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position complete all as specified and directed. (Note : Cleaning repairing, etc. measured separately)

S & F for ball valves 25mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum wieght for 210 grams as in repairs complete all as specified and directed.

S & F in repairs for ball valves 25mm bore high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe minimum wieght for 210 grams as in repairs complete all as specified and directed.

Taking down eves gutters and rain water pipes, soil wast and vent pipes(any size or pattern) includingt all fittings, heads, shoes, bends swan necks etc including cleaning or refixing or removing to stores (measured over all as fixed along the centre line over fitting and accessories) complete all as specified and directed.

S & F 150 mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.

M & L concrete bed to 150 mm bore drain pipes in PCC 1:3:6 type C-2 incl packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

S & F in repairs 75 mm bore PVC (SWR ) pipe single socketed in any length with rubber ring joints fixed to walls including all fittings complete all as specified and directed.

S & F in repairs 110mm bore PVC (SWR ) pipe single socketed in any length with rubbering joints fixed to walls including all fittings complete all as specified and directed.

S & F PVC (SWR) bend 110mm bore any radius including door system complete all as specified and directed.

S & F PVC (SWR) bend 75 mm bore any radius including door system complete all as specified and directed.

PVC (SWR) vent cowl of bore 75 mm complete all as specified and directed.

PVC (SWR) branch piece, double (double Y) equal or unequal of bore 110 mm complete all as specified and directed.

S & F PVC (SWR) 110mm bore bends any radius complete all as specified and directed.

S & F shoes suitable for 110 dia PVC (SWR) pipe complete all as specified and directed.

S & F PVC (SWR) junction single 110 mm dia with access door (single T) equal or unequal complete all as specified and directed.

S & F branch pieces 110 mm dia with access door single (single Y) equal or unequal complete all as specified and directed.

S & F PVC (SWR) 75 mm bore bends door complete all as specified and directed.

S & F PVC (SWR) junction single 75 mm dia with access door (single T) equal or unequal complete all as specified and directed.

S & F in repairs aluminium (die cast body) Door closer hydraulically regulated, designation No. 3,universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg complete all as specified and directed.

S & F in repairs 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S & F in repair water tank cover for 500/1000lts tank with necessary arrangements complete all as specified and directed.

S & F aluminium door seal 1mt length for wooden door with rubber beading complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits,manholes, pier holes, etc. nexc 10 sq m on plan and n exc1.5 m in depth getting out in soft/loose soil complete all as specified and directed.

All as per item No 112 above but exc 1.5 m and not exc 3 m deep in loose and soft/loose soil.

Cleaning and removing of blockage of any type for sludge/effluent etc in 150 mm dia sewer line system manually with the help of green bamboo split or any other mechanical method as deemed fit complete all as specified and directed.

Cleaning and removing of night soil, sludge from manhole/septic tank/soakage well etc incl pumping out sewage water from manholes, septic tank and sewer line and removing the same exc 100 m and not exc 250 m and burried the sludge by digging pit and disinfecting the sludge complete all as specified and directed.

Demolition of cement concrete in ground floor and paving not exc 15 cm thick (above and below ground level )complete all as specified and directed.

Demolition of reinforced cement concrete in roofs, floors (other than ground floors), beams, staircases, landing,chajjas ,man hole cover slab and similar suspended work complete all as specified and directed.

Demolition and breaking up 150 mm dia SGW pipes (Salt glazed ware, AC or Reinforced concrete) for sewer line incl covered bed hunching of any description and removing from site set in cement mortar complete all as specified and directed.

M & L for plain cement concrete type C-2 in 1:3:6 as in concrete bed to drain pipes including packing under, and haunching against the sides of pipes after they are laid and tested; in in for 150 mm dia (internal dia) SGW pipes complete all as specified and directed.

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified and directed.

M & L 150 mm dia (Internal dia) salt-glazed stoneware drain pipes laid in trenches and jointed as specified complete all as specified and directed.

M & L for plain cement concrete ( 1:2:4 )type C1 (using 20 mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, benching of man holes etc complete all as specified and directed.

M&L for plain cement concrete (1:2:4) type B-1 using 20 mm graded stone aggregate as in precast cement concrete (reinforced) man holoes cover slabs and set in cement mortar (1:6) complete all as specified and directed.

M & L for 6 to 8 mm and over TMT bars, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

M & L for cement concrete in 1:3:6 type C 2 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete as in man holes complete all as specified and directed.

M & L for Cement concrete in surface channels and drains in 1:2:4 Type B1 (using 20 mm aggregate) complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm each complete all as specified and directed.

Removing excavated/surplus material exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and directed.

Cutting into existing manholes for 150 mm dia of pipes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-l smooth finished, and reforming benching as required complete all as specified and directed.

Cleaning and removing of blockage of internal area such as bath, toilet, kitchen sink, WHB or any type of water outlet and gully trap manually with the help of green bamboo, split or any other mechanical method as deemed fit complete all as specified and directed.

Cleaning of block/soaked man holes or chamber of any depth including taking out and removal of sludge/dirt etc to a place as directed at site at a distance n exc 50 m including removing and re-fixing the existing manholes cover slab without damage etc complete all as specified and directed.

M & L 75 mm PVC (SWR) floor trap,pain with grating including jointing with solvent cement complete all as specified and directed.

M & L 75 mm PVC (SWR) nanhi trap,pain with grating including jointing with solvent cement complete all as specified and directed.

S & F grating doom 100 mm dia of PTMT (Min weight 25 grms) complete all as specified and directed.

S & F grating doom 125 mm dia with waste hole of PTMT (Min weight 40 grms) complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks exc 250 lts & n exc 500lts capacity and from mouths of circulating pipes complete all as specified and directed.

Cleaning and removing all scale and dirt, etc, from tanks exc 500 lts & n exc 1000 lts capacity and from mouths of circulating pipes complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

M & L Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walkways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E- complete all as specified and directed.

S&F in repairs of CONSEC ZAL Super punch barb tape (SRPBT) Aluminium base helix coil with and include necessary GI fixing clips for securing complete all as specified and as directed with following specification:- (i) Dia of coil(unstreched-610 mm (ii)No of circle-51 turns per coil(iii) weight of each coil with hessian pack-8.5kg.(iv) Coverage per coil-8RM (v) Central core wire:-made from 2.6 mm dia GI-H.T.S.S wireas per IS -4454 galvanised as per IS 2629.(vi) Razor Punched tape is CONSEC-ZAL steel comprising of AL base with Zinc alloy @150 gm/m2 conforming to ASTM-729/A-729M with additional primer treatment of Epoxy/Polyurethane & final paint top coat of Caulifieid green shade(BSL 139) by Hot Dipping process. The item also includings supply of 3 Nos of Horizontal ZAL runner wire for fixing of concertina coil including taking down the old unserviceable concertina coil complete all as specified and directed. Note :Only Net weight of coil incorporated at site shall be considered for measurement.

S & F Hand rails, half round or others teel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh ,concentrina coil etc.) including all necessary drilling, bolting or riveting, etc.,and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for plain cement concrete 1:2:4 Type B1 20 mm aggregate for fixing angle iron in coping of boundary wall lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, including weathering, slightly rounded or chamfered angles and throating, complete all as specified and directed.

M/S T.N.CONSTRUCTION

ARIN AND COMPANY

jlenterprise