ADDN ALTN TO PERSONNEL LINES, COOK HOUSES AND DINNING HALLS BLDG NO P-13 AND P-15, P-103 (32) AND P-94(12) (OFFRS) MD ACCN, P-22 (JCOS MD ACCN), P-40 AND P-43 (OR MD ACCN) AT AH R R UNDER GE (E/M) (R R) HOSPITAL DELHI CANTT-10

Amount

Taking down Chowkats or frames n.exc 1.5 Sqm each (Without taking off shutters from the frame) complete all as specified & directed.

Taking down Chowkats or frames exceeding 1.5 Sqm but not exceeding 4 Sqm each (Without taking off shutters from the frame) complete all as specified & directed.

Taking down shutters of any description exc 1 Sqm and n exc 2 Sqm each complete all as specified & directed.

Dismantling floor, hearth or wall tiling incl. cement mortar bedding (but not backing), removing servicable tiles to store and rubbish off the premises complete all as specified & directed.

Taking down cement plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified & directed.

Demolition of unreinforced cement concrete in gound floors and paving n. exc 15cm thickness ( below or above ground level).and removing to a distance n, exc 500M complete all as specified & directed.

M&L for 25 mm thick PCC 1:2:4 type B-0 (using 12.5 mm graded stone aggregate) in sub base of floor complete all as specified & directed.

M/L for factory made 50 micron powder coated aluminium three way track sliding windows of frame size 92mm x 31.75mmx 1.5mm thickness and of shutter size 40mmx 18 ( with 9.00mm interlocking legs) x 1.45mm thick ( two shutter glazed, coverin half of span of opening each and one shutter skelton covering half of span of opening) incl provn for making windows air tight, including 95mm aluminium handle with spring lock, stainless steel wire cloth, 0.45mm normal dia of wire and average width of aperature 1.4mm and fixed with steel wire staples and 5mm thick plain glass including necessary fitting and fixtures/ aluminium snap beading complete all as specified Note:- (a) measurement shall be taken for clear opening ie. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be include in the above rates and no extra shall be paid.

S&F fabricated aluminium window double shutters with 50 micron powder coated aluminium farme of section 63.5mm x 38.10mmx 1.5mm thick shutter with section 47.62mmx 44.45mm x 1.50mm thick including powder coated aluminium “D” handle, powder coated hinges-02, powder coated peg stays – 01 for each shutter, powder coated tower bolts 01 for each shutter, etc including jointing cleats for fixing builders hardware fittings & stainless steel wire cloths, 0.45mm nominal dia of wire and average width of aperature 1.40mm and fixed with aluminium wire staples including necessary fitting/ fixture/ aluminium snap beads rubber packing incl 5 mm thick sheet glass complete all as specified. Note:- (a) measurement shall be taken for clear opening ie. out to out of window frame as a whole including all fittings and fixtures and no extra shall be paid separately. (b) Cost of glass, SS wire mesh and all fittings/ fixtures deemed to be include in the above rates and no extra shall be paid.

S&F factory made box type mild steel windows complete with frame, shutter, hinges, MS tower bolts, handles, peg stay, glazing bars and wire guage bars complete all as specified with one coat of red oxide primer and two coats of synthetic enemel paint complete all as specified & directed.. (Note :- Glass and wire guage included in this rate with fixing with putty and bars.)

S&F Sheet glass ordinary quality 5mm thick in Squares/ rectangular exc 0.5Sqm in each pane complete all as specified & directed.

S&F Solid PVC door frames of size 50 mmX 47 mm,made out of 5 mm thick plain colour PVC sheets reinforced with MS square tubes complete all as specified & directed.

S&F solid PVC double door frame of size 50mm x 95mm made out of 5mm wood grain printed PVC sheet used instead of plain colour PVC sheet reinforced with MS tube, supplying and fixing in opening as per specification and drawing.

S&F pressed steel frames of size (105x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, (03 Nos 125mm long) lock strike plate,holdfast etc, including PCC 1:3:6 type C1 filled in frame complete all as specified and directed.

S&F pressed steel frames of size (125x 60mm) for doors with one or more rebates including necessary fixing lugs, hinges, (06 Nos 125mm long) lock strike plate,holdfast etc, including PCC 1:3:6 type C1 filled in frame complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails M.S frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent for stiles and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, suppling and fixing in the frame at site as per specification and drawing.

S&F for factory made solid PVC Moulded door shutter, 28 to 30mm thick (stile) with 2, 4 or 6 raised panel design with 2mm thick Moulded Prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face fixing in frame at site as per specification complete all as specified.

S & F 35 mm thick factory made second class hard wood, kiln seasoned and chemically pressure treated plain framed, panelled shutter (Two panel) with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneering on both faces. the size of rail and stile as per IS: 1003 (Part-I) and complete all as specified.

M/L 35mm thick 2nd class hard wood factory made Glazed and skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc. sizes of members of shutters as specified in SSR Part-I Section-8 clause 8.24(a) complete all as specified.

S&F 75 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S&F 100 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 100 mm size aluminiuma alloy handles,cast type,anodised all as directed complete all as specified and directed.

S&F 100 mm size MS butt hinges medium weight cold rolled fixed/ welded to frame complete all as specified and directed.

S&F 250mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet,cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified & directed.

S&F 150 mm long,aluminium,anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size aluminiuma alloy handles,cast type,anodised all as directed complete all as specified and directed.

S&F 150mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor type anodised complete all as specified and directed.

M&L applying two coats of synthetic enameled paint over a coat of pink primer on new wooden surfaces over 10 cm width or girth including preparation of new surfaces all as specified.

S&F Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.4 mm and fixed with stainless steel wire staples complete all as specified and directed.

M&L for 15 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:4 on brick work or concrete surfaces of wall and finished even and smooth without using extra cement mixed and including water proofing compound and 1 to 2mm thick wall care putty as a whole or in patch work all as specified and directed by Engr in charge. (Make : SIKA / Dr Fixit / Ascolite or equivalent as approved by GE). (Note: 1. White cement shall be used as per site requirement as directed by Engr- in- charge)

M&L for 15 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:6 on brick work or concrete surfaces of wall and finished even and smooth without using extra cement mixed and 1 to 2mm thick wall care putty with airless spray technology, max pressure 3300 PSI with single spray gun as a whole or in patch work all as specified and directed (Make : SIKA / Dr Fixit / Ascolite or equivalent as approved by GE). (Note: 1. White cement shall be used as per site requirement as directed by Engr- in- charge)

M&L for 5 mm thick rendering of ready mix mortar having ratio equivalent to CM 1:3 on brick work or concrete surfaces of ceiling and finished even and smooth without using extra cement mixed as a whole or in patch work all as specified and directed (Make : SIKA / Dr Fixit / Ascolite or equivalent as approved by GE). (Note: 1. White cement shall be used as per site requirement as directed by Engr- in- charge)

Preparing new plaster surface by washing rubbing down and stopping of distempered and painted surface and applying two coats of distemper oil emulsion over a coat of primer with airless spray technology,max pressure 3300 PSI with single spray gun on surface of walls surface complete all as specified & directed.

Preparing new plaster surfaces of ceilings by brooming down or by steel wire brushing and applying two coat oil emulsion distemper with primer by airless spray technology, max pressure 3300 PSI with single spray gun on ceiling complete all as specified & directed.

M/L for complete removal with machine of existing treatment of walls surfaces and providing a layer of 1-2mm thick wall care putty with airless spray technology, max pressure 3300 PSI with single spray gun on plaster surfaces of wall and prepration of surfaces to receive distemper complate all as specified and directed.

M/L for complete removal with machine of existing treatment of walls surfaces and providing a layer of 1-2mm thick wall care putty with airless spray technology, max pressure 3300 PSI with single spray gun on plaster surfaces of ceiling and prepration of surfaces to receive distemper complate all as specified and directed.

M&L Machine cut kota stone slab flooring 18-20 mm thick over cement screed base laid and jointd with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including screed bed and bedding layer of mortar 15 mm thick for laying floor finishes in CM 1:6 size of Kota stone as decided by Engr-in-charge complete complete all as specified.

M&L Machine cut kota stone slab flooring 18-20 mm thick in riser of steps with single piece,skirting, dado and pillar laid over cement screed and jointd with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing including 10mm thick rendering in CM 1:4 as a backing coat on walls for fixing of tiles size of Kota stone as decided by Engr-in-charge complete All as specified and directed.

S&F in repair sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washer and wastes, incl bedding in cement morter on to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915X460 mm bowl size 410mm x 330mm x 160mm including PVC waste pipe 32mm bore, 65cm long complete all as specified and directed.

S&F in repair sink with out drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs,washer and wastes, incl bedding in cement morter on to dwarf wall or incl fixing cantilever brackets of mild steel 35x 35x5 mm and connecting union to pipe overall size 460mm x 410 mm 160mm including PVC waste pipe 32mm bore, 65cm long complete all as specified and directed.

M & L in repair vitreous China squatting pan, ‘Orissa’ pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) complete all as specified and directed.

Supply & Fix in repair vitreous china wash basin, size 550 x 400 mm including CP brass coupling brackets and PVC waste pipe complete all as specified and directed.

S&F in repair under / over Oval type wash basin supperior colour 550X400 mm with suitable brass cromium plated bottle trap32mm bore, CP coupling complete all as specified and directed.

S&F in repair vitreous china urinal, bowl type, flat back, size of ( 465x335x265mm) white minimum with grating and union for discharge pipe(exclududing flushing istern, fluh pipe and waste pipe) complete including providing and fixing plugs, beeding urinal against wall in cement mortar 1:2 securing urinals to plugs with and including 60mm long brass screws, pointing around urinal back in cement complete all as specified and directed.

S&F in repair waste coupling of CP brass ( half or full threaded) 32mm bore dia of discharge suitable for urinal complete all as specified & directed.

S&F in repair 15mm bore cast copper alloy CP fancy type long body bib cock and fixing to GI pipe complete all as specified and directed.

Supply & Fix in repair 600mm long heavy duty PVC Connection 15mm size with PTMT nuts complete all as specified and directed.

S&F in repair 32 mm Waste coupling of brass CP (half or full threaded) complete all as specified and directed.

S&F in repair fancy type chromium plated with long shank and cup ( concealed type) 15 mm bore stope valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair 15mm bore pillar taps fancy type cast copper alloy, with capstan heads,chromium plated screwed down high pressure,with or without lettered' Hot' or Cold ' with long screwed shanks and fly-nuts for iron pipe and fixed complete all as specified and directed.

S&F in repair PVC valveless, syphonic action type (10 Ltr) flushing cistern low level white with intel ball valve, float and handle including bracket and flush pipe to squatt pattern closet including all joints and making good to the floor complete all as specified and directed.

S&F in repair PVC connection 450 x 15mm dia PTMT (PVC) complete all as specified and directed.

S&F in repair bib taps cast copper alloy with crutch or butter fly handles, screwed down, screwed for iron pipe or brass ferrule and fixed 15 mm bore CP complete all as specified and directed.

S&F in repair Chromium plated shower rose with or without swivel joints any size incl fixing with 15mm pipe complete all as specified and directed.

S&F in repair brass CP Tubular towel rail, 20mm dia ,D type, 60 cm long between flanges complete all as specified and directed.

S&F in repair white colour, 1st quality vitreous china washdown water closet pan (pedestal pattern) fancy type including built in vitreous china flushing cistern dual flush type of capacity 10 litres including PVC white seat cover, complete all as specified and directed.

S&F in repair angular stop cock 15 mm bore with wall flange made of cast copper alloy, chromium plated fancy type complete all as specified and directed.

S&F in repair wash basin mixer, with out pop up waste system, long body, made of cast copper alloy, chromium plated fancy type, suitable for 15 mm bore pipe, complete all as specified and directed.

S&F in repair of toilet roll holder with flap made of cast copper alloy, chromium plated, complete all as specified and directed.

S&F in repair towel ring round/square shape of suitable size made of cast copper alloy, chromium plated, complete all as directed.

S&F in repair 3-in-1 wall mixer with provision for overhead Shower with 115mm long bend pipe on upperside, connecting legs & wall flanges made of cast copper alloy, chromium plated fancy type, complete all as directed.

S&F in repair handshower (health faucet) with 8 mm dia, 1.0 M long flexible tube, wall hook and wall flange made of cast copper alloy, chromium plated fancy type, complete all as specified.

S&F in repair PVC made multipurpose cabinet with front door looking mirror of overall minimum size 350 x 450 mm, complete all as directed.

S&F in repair SS glossy finish grating of square shape, overall size of 150x150mm with hinge type openable jali of 100 mm dia size with and including fixing with cement mortar to floor/nahani traps etc, complete all as specified and directed.

S&F in repair soap dish brass chromium plated complete all as specified and directed.

S&F in repair 200x200mm high quality glass corner shelf made of 5mm thick of glass including U type CP brackets complete all as specified and as directed

S&F in repair Mild steel work in framed work such as grills, gratings, framed guard bars, ladders etc, with ends of bar shouldered and / or riveted, or forged into spikes, and similar work conforming to FE 290 Gde E-165 complete all as specified & directed.

S&F in repair 4mm thick Figured glass, pin headed type and glazing with oil putty in Squares/ rectangular exc 0.5Sqm in each pane complete all as specified and directed.

S&F in repair 300mm long mild steel ordinary rat tail rod pattern springs for doors including roller and roller plates ISI marked complete all as specified and directed.

M&L for Cutting holes in brick walls exc one brick but n. exc two bricks in cement mortar or cement lime mortar for inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-I as requried complete all as specified & directed.

M&L in repair bands, straps, supports or strays for rainwater, ventilating pipes, including bolts, if requried, hooks (stay), for large gates, hook and pintal hinges, large hasps and staples, chains, hand made sliding bolts, clams, holdfasts, wall ties, hooks for hanging fans, plan angle cleats for securing purlins to wood trusses or rafters, knee piece inserted , two way and three way straps, plate washers and similar small articles conforming to Fe 290 Gde e-165 all as specified.

Demolition of Mud/ Mud phuska in roofs any thickness, including plastering and leeping if any and cleaning the roof surfaces with wire brushes and removal of Mud/ Mud phuska to a distance exceeding 250M and n, exc 500M complete all as specified and directed.

Dismantling brick tiles or terracing tiles single layer on roofs complete all as specified and directed.

M&L cement concrete 1:2:4 type B1 using 20 mm graded aggregates as in roof kerb, mud stops and padding all as specified and as directed.

M&L, Priming roof surfaces and applying water proofing treatment over roofs comprising of the following complete all as specified & as directed:- (a) Applying oil bound bituminous primer at the rate of 0.4 Ltrs/Sqm as per IS 3384-1986 on prepared surfaces. Surface shall be kept free till the moment, the primer is impregnated and the solvent oil in primer is evaporated (b) Applying one coat of hot straight run bitumen @ 1.20 Kg/Sqm of grade 85/25 confirming to IS-73 (Grade S-35).(c) Laying 3mm thick APP polymeric water proofing membrane of weight not less than 3.6 kg/sqm, black finish reinforced with non woven polyster matt, with a thermo fusible finish, torching overlaps with a propane or a butane gas torch, with a overlap of 75mm at sides and 100mm at the ends and sealing including applying a coat of cold emulsion bituminous primer all as per manufacturer's instruction including preparation of surface. (d) Applying one coat of hot straight run bitumen grade 30/40 (Grade S-35) conforming to IS-73 @ 1.20 kg/Sqm. Make: "Moply FP" manufactured by STP Texsa Ltd or Hyper Plas (Polyester) manufactured by M/S IWL Ltd or "Shaliplas"ter) manufactured by M/S Capital Steels and Chemical Pvt Ltd or Makpolyplast manufactured by M/S M K Patro as approved by GE. Note :- The water proofing treatment shall be got carried out by the manufacturer or their authorised applicators. The contractor shall give 10 years guarantee for effectivenss of water proofing treatment, 2.5% of work done amount of this item shall be retained from contractors payment for a period of 10 years reckoned from date of physical completion of this work, or inlieu contractor may deposit bank FDR for the said amount for 10 years which shall be released by GE on expiry of satisfactory completion of 10 years period.

S&F for pre- cast PCC tiles machine pressed of size 25cm x 25cm x 20- 25mm thick over and including 15mm thick screed bed in cement mortar 1:6 and joint grouted flush in cement mortar 1:3 mixed with WPC as per manufacturer instruction complete all as specified and directed.

M&L for guniting of spalled / corroded reinforced cement concrete surface, on vertical or overhead position, comprise of chipping of spalled and loose concrete; cleaning rust from reinforcement by sand blasting; scrubbing down concrete surface with wire brushes; cleaning with water; allowed to dry and applying a layer of zinc rich epoxy primer as anti rust on all exposed reinforcement followed by a layer of bonding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited; applying two layers of guniting over steel welded wire mush having 4 mm dia of wire and aperture 75 mm, total thickness of gunite not exc 25 mm thick (average thickness) in cement mortar 1:2 using OPC 53 grade cement duly mixed with polycrete admixture @ 2% by weight of cement or as per manufactures instruction and finally applying cement plaster over gunite surface of required thickness to give even uniform & smooth finish conforming to proper geometrics in cement mortar (1:3) to match with the existing surface as in sides and soffits etc of slabs, chajjas, fins, fascias, parapets, lintels, columns and beams etc with and incl necessary scaffolding, shuttering, chases to brick work or RCC members etc, complete all as directed.

Taking up or down 15mm bore steel tubing and connections all as specified and directed.

All as per item No 79 here-in-before but 20mm bore of pipe

All as per item No 80 here-in-before but 25 or 30mm bore of pipe

All as per item No 81 here-in-before but 40 or 50mm bore of pipe

M&L for Refixing 15mm bore old steel tubing and connections, in new or old position ( walls,ceiling,floors etc all as specified and directed.

All as per item No 83 here-in-before but 20mm bore of pipe

All as per item No 84 here-in-before but25 or 30mm bore

All as per item No 85 here-in-before but 40 or 50mm bore of pipe

S & F 15mm bore GI tubing medium grade with all fittings and fixed complete walls and ceilings or laid in floors all as specified and directed.

All as per item No 87 here-in-before but 20mm bore of pipe

All as per item No 88 here-in-before but 25 mm bore of pipe

All as per item No 89 here-in-before but 50mm bore of pipe

M&L for Preparing of old plastered surfaces by washing rubbing down and stopping of distempered and painted surface and applying one coats of distemper oil emulsion with airless spray technology, max pressure 3300 PSI with single spray gun on surface of walls surface complete all as specified and directed.

M&L for Preparing old plastered surfaces of ceilings by brooming down or by steel wire brushing and applying one coat oil emulsion distemper with airless spray technology, max pressure 3300 PSI with single spray gun on ceiling. complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coat of exterior wheather proof paint on walls over 2mm thick wall care putty with airless spray technology, max pressure 3300 PSI with single spray gun complete all as specified.

M&L for preparation of new plastered surfaces of wall and applying two coat of exterior wheather proof paint on ceiling over 2mm thick wall care putty with airless spray technology, max pressure 3300 PSI with single spray gun complete all as specified.

M&L applying one coat of synthetic enameled paint on woooden surfaces over 10 cm width or girth including preparation of old surfaces all as specified.

M&L applying one coat of synthetic enameled paint on steel surfaces over 10 cm width or girth including preparation of old surfaces all as specified.

M&L applying one coat of synthetic enameled paint on steel surfaces n exc 10 cm width or girth including preparation of old surfaces all as specified.

M&L for Preparing old plastered surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash on ceiling complete all as specified and directed.

M&L for complete removal with machine of existing treatment and applying 2mm thick wall care putty and followed by two coat of exterior weather proof paint with airless spray technology, max pressure 3300 PSI with single spray gun on wall all as specified and directed.

M&L for complete removal with machine of existing treatment and applying 2mm thick wall care putty and followed by two coat of exterior weather proof paint with airless spray technology, max pressure 3300 PSI with single spray gun on ceiling all as specified and directed.

M & L for vitrified tile 9 to 10 mm thick (Square/ rectangular) dark shade area of each tile not exceeding 0.36 Sqm, in floor etc set & jointed in neat cement slurry and pointed in coloured cement to match including screed bed and bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and approved by Garrison Engineer.

M & L for vitrified tile 9 to10 mm thick (Square/ rectangular) dark shade area of each tile not exceeding 0.36 Sqm, in skirting etc set & jointed in neat cement slurry and pointed in coloured cement to match including 10mm thick rendering in CM 1:4 as a backing coat on walls for fixing of tiles complete all as specified and approved by Garrison Engineer.

M&LNon - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not n. exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed and bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and approved by Garrison Engineer.

M&L for glazed ceramic coloured tiles in floors 400 x 400 X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including screed bed and bedding layer of mortar 15mm thick in CM 1:6 for laying floor finishes complete all as specified and approved by Garrison Engineer.

M&L for glazed ceramic coloured tiles in verticle surface 450 x 350 X7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match including 10 mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:4 for backing coat complete all as specified and directed .

Dismantling of stone slab and tiles of any description or thickness in floors, aprons etc. ( laid bedded and pointed in any mortar) complete all as specified.

M/L 18- 20 mm thick granite of any type work (table rubbed and polished) in steps, jambs, pillars, window cills, cooking platforms laid over cement screed bed or bedding 15mm thick laying floor finishes in CM 1:6 and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified & directed.

M&L fo 20mm thick marble Makrana white machine cut in floor, skirting/ dado laid over cement screed bed of bedding layer 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

Dismantling timber scantling 40 Sq.cm and over in section in any position in fillets, rails, post purlin etc complete all as specified & directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F of SS (Gd-304) brackets, angles, hollow tubes, flats, sheets etc of any shape and size with & including SS screws / fasteners etc and all kind of machine works i.e. cutting, welding, bending, moulding, grinding, polishing, buffing etc to get the required shape and size, fixed to any position and at any surface etc, complete all as directed. (Note : All fixtures and fittngs should be of stainless steel).

M&L fo 20mm thick marble Makrana green machine cut in floor, skirting/ dado laid over cement screed bed of bedding layer 15mm thick for laying floor finishes in CM 1:6 complete all as specified and directed.

S&F in repair bottle trap 32mm size with 250mm long wall connection pipe and wall flange made of cast copper alloy, chromium plated fancy type,complete all as specified and directed.

S&F in repair 25mm dia drapery rod wooden finish powder coated and fixed as approved by Engr-in-Charge complete all as specified and directed.

S&F heavy duty Stainless steel peg set of minimum size 450x50mm with 6 pegs fixed on to bath doors/ walls including screws and necessary fittings complete all as specified and directed.

S&F in repair 32mm dia and 60 cm long PVC waste pipe for WHB/ kitchen sink complete all as directed.

M&L in repair 18mm thick Medium density fibre board, both side laminated exterior grade, fixed as in framework for cupboard and cupboard shutters including/ beading fancy type with screws complete all as specified and directed.

S&F soft closing clips on hinge, full/ half overlay type SS stainless steel complete all as specified and directed.

S&F 100mm size extruded stainless steel CP handles, fabricated type polished complete all as specified and directed.

S&F multi purpose lock 50mm size with triple keys suitable for cup boarddoor/ drawer complete all as specified and directed.

S&F 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, fixed to wall including taking down old pvc pipe and all connection ie bends, tee equal or unequal all as specified and directed.

S&F PVC 110mm (SWR) bends, elbow including taking down all as specified and directed.

S&F PVC (SWR) junction single, (single T) equal or unequal including taking down all as specified and directed.

M&L for Excavation in trenches, n. exc 1.5m wide and n. exc 1,5m in depth, for foundation, etc or for shafts, wells, cesspits, manholes, piers holes etc n.exc 10 sqm on plan and n. exc 1.5m in depth and getting out soft/ loose soil complete all as specified & directed.

Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends to edges of landings, steps, cills, sunsheds,shelves, lintels etc. and cutting chases for concealed water tubing or cocealed conduit wiring, etc nad making good, cutting n,exc 10 cm girth (brick wall) all as specified and directed.

S&F 1000 liters capacity rotational moulded polythene water storage tank (cylindrical vertical with close top) hoisted and fixed in position including dismantaling of water tanks any capacity and all connection as specified and directed.

S&F in repair nipple suitable for HDPE water tank 25mm bore complete all as specified and directed.

S&F in repair ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball complete screwed for iron pipe and fixed 25mm bore of pipe complete.

M&L for taking up cast iron pipe any size or pattern ( including all fittings), fixed to wall or floor with spigot and sockets ends and lead joints including burning out joints and recovering lead all as specified and as directed

S&F Cast iron soil waste and vent pipe100mm bore ( sand cast pipe) of in any length with or withouts ears, with lead joints fixed to walls.all as specified and directed.

S&F Cast iron soil waste and vent pipe100mm bore ( sand cast pipe) of in any length with or withouts ears, with cement joints laid in floors or in trenches.all as specified and directed.

S&F Cast iron soil waste and vent pipe 75 mm bore ( sand cast pipe) of in any length with or withouts ears, with lead joints fixed to walls.all as specified and directed.

S&F Cast iron soil waste and vent pipe 75 mm bore ( sand cast pipe) of in any length with or withouts ears, with cement joints laid in floors or in trenches.all as specified and directed.

S&F bends, spigot 100mm bore of pipe(any radius) diminishing, pieces or tapers( large bore measured) All as specified and directed.

S&F 100mm cast iron branch pieces, Tee, single (equal or unequal), ordinary or inverted ( spigot) or socket type) or with parallel branches all as specified.

S&F bends, spigot 75mm bore of pipe(any radius) diminishing, pieces or tapers( large bore measured) All as specified and directed.

S&F 100mm cast iron branch pieces, Tee, single (equal or unequal), ordinary or inverted ( spigot) or socket type) or with parallel branches all as specified.

S&F for cast iron floor trape suitable of 75 mm dia outlet with grating including with jonting to waste pipe in run lead fixed in cemnt mortar (1:4) complete all as specified.

S&F in repair cast iron 'P' or 'S' trape of 100 mm size as per IS: 1729-2002 ISI marked,fixed with lead joints laid in floor, complete all as specified and directed.

Demolition of unreinforced cement concrete of any description and any position not otherwise specifically provided for and removing to a distance n.exc 500m etc, complete all as specified.

M&L rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:3 using integral liquid water proofing compound for floor and sides of wall in sunken floor complete all as directed. ( Note:- WPC shall be measured and paid separately.

M&L for ready mix rendering with water froofing compound 5 mm thick on fresh plastered surface for both floor and side of wall in sunken floor, complete all as specified.( Make:- Coral/ Cico/ Dr Fixit)

M&L for sealing of pope pe etratio of toilets core cutting & sunken slab treatment in fwg stages :- Supply and apply solvent free, moisture insensitive epoxy resin based patch repair putty Sikagrade - 694F (I) yield : 0.6 ltr/kg, suitable for submerged condition having compresssive str of 40N/ MM2 (1 day) acording to IS 9162 - 1979 on pipe penetration surface. The putty shall be applied to a grovve thickness of mim 20 mm in pipe penetration joints to concrete. Penetration of surface of sunken portion and M & L for glass fiber rainforce acrylic modified cementitious coating sustem as Top coat : Sila Top Seal - 107 @ 1.5 Kg/ M2 over reiforcement, Sika Fab - 1 over based coat : Sika Top Seal - 107 @ 1.5 KG per/M2 etc all as specified and directed. System should have compressive strength : 20 N/ mm2, bond strength : 2.0N/mm2 complete all as specified. Note : (i) Entire work shall be carried out through manufacturar or his authorised representitive. (ii) The contractor shall furnish a 10 years warrabty for effectiveness of waterproofing treatment and the period shall be reckoned from the next day of actual date of competion of work. (iii) An amount of 2.5 % of total quoted amount against this item shall be retained, out of the final bill amount as seurity deposit, against 10years water proofing effectiveness and the same sall be released only after the exiry of guirantee period. The contractor ay also furnish fixed deposit receipt/ BGB in lieu of the su to be retained as security.

Supply only integral liquid water proofing compound complete all as specified.

M&L for plain cement concrete 1:5:10 E-2 ( Using 40mm graded stone aggregate ) for filling in any position complete all as specified.

M&L for 25mm thick PCC 1:2:4 type B-1 ( Using 20mm graded stoe aggregate ) as in flooring finished even and smooth surface using extra cement complete all as specified.

M&L for 75mm bore of pipe stack clamps made out of 50mm x 5mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends for stays to wall or roof complete all as specified & directed.

M&L for 100mm bore of pipe stack clamps made out of 50mm x 5mm thick flat iron and 16mm dia round iron stays, including bolts and nuts and securing ends for stays to wall or roof complete all as specified & directed.

S&F grating square 150mm size of stainless steel ( Minimum weight 100 gms) all as specified and directed

S&F in repair 20mm dia gun metel globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified & directed.

M&L for cement concrete 1:4:8 type D2 ( 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified.

M/L for Demolition and breaking up drain pipes ( salt glazed ware AC or reinforced concrete) of 200mm internal dia of pipe complete all as specified and directed.

S&F Reinforced concrete pipe, class NP-2 200mm bore of pipe laid in trenches and jointed complete with collars all as specified and directed.

M&L for concrete bed to drain pipes 1:3:6 type C2 including packing under, and haunching against the side of pipes, after they are laid and tested, all as specified and directed.

M&L for Returning, filling in, including spreading, levelling, watering and well ramming in layers n, exc 25 cm soft/ loose soil all as specified and directed.

M&L for demolition of brick work stone / boulder masonary, built in cement mortar including all quoins, arches, pillars, etc. all as specified and directed.

M&L for brick work with sub- class 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 all as specified and directed.

M&L for brick work with sub- class 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 all as specified and directed.

M&L for providing precast cement concrete 1:2:4 Type B1 ( using 20mm graded stone aggregate) Set in cement mortar 1:6 as in landings, cover slab( for manholes etc.) chullah hoods, chajjas,water troughs with plain faces all as specified and directed.

S&F for mild steel TMT bars 6 to 8mm dia, cut to lenth, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or secring with clips completd all as specified and directed.

Dismantling Asbestos cement ( corrugated, semi corrugated etc) sheets in roof coverings all as specified and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping, screws as specified and directed.

S&F Pre- painted galvatume aluminium zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping, screws complete all as specified & directed.

M&L for 50mm Sand filling under floors or in foundations including watering and consolidation complete all as specified.

M&L for Machine pressed rubber moulded coloured precast concrete interlocking paver block ultra finish with epoxy coating any shape and size conforming to IS 15658- 2006 of 80mm thickness M-40 Grade all as specified and directed.

M/L PCC 1:3:6 type C-1 ( using 20mm graded stone aggregate) as in kerb or mud stops, rounded or chamfered on edges all as specified and directed.

M/L in repair 12mm thick Plywood grade BWR, type BB, ( 7 Nos of ply) fixed with screws to timber farme work all as directed and specified.

M/L for second class hard wood for plain fillets, square, rectangular or traingular in section, clean sawn, screwed with nails or brads Exc 13 & n.exc 25 Sqcm in section all as specified and directed.

M&L for removing excavated material exc 250Mtr but n. exc 500mtr depositing where directed all as specified.

S&F in repair 4 mm dia plain mild steel wire, galvanised class3,in detached work such as for mosquito nets and fixing to straining bolts, hooks, eyes etc. all as specified and directed.

M/L for surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out soft/ loose soil complete all as specified & directed.

M/L for rolling and consolidating formation surfaces with power roller exc 8 tonne & n. exc 12 tonne complete all as specified & directed.

M&L for Excavation in post holes ( or similar holes) each n. exc 0.5 cum, getting out soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm all specified and directed.

S&F Steel work in tubler trusses, posts including special shaped washer etc.complete using ERW or induction butt welded tubes conforming to IS 1161- 1979 grade St- 240 complete all as specified & directed.

M&L for PCC 1:3:6 type C-2 ( Using 40mm graded stoe aggregate ) in foundation, filling and mass concrete complete all as specified.

M&L for hardcore of guage 63mm but n.exc 100mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified & directed.

M&L for 75 mm thick PCC 1:2:4 type B-2 (using 40 mm graded stone aggregate) in sub base of floor complete all as specified & directed.

M&L for 50 mm thick PCC 1:2:4 ( Using 20mm graded stoe aggregate ) as in flooring finished even and smooth surface complete all as specified.

M&L applying two coat of synthetic enameled paint over one coat of priming paints plaster coat on concrete surfaces over 10 cm width or girth including preparation of new surfaces all as specified.

S&F plastic dividing strips, 1.5mm thick and width of strrip 40mm fixed in any position all as specified and directed.

M&L for PCC 1:2:4 type B-1 (using 20 mm graded stone aggregate) in lintel upto 1.5m clear span, cills, steps, seismic and other similar work all as specified and directed.

M/L for excavation over area, n. exc 1.5m deep and getting out Hard/ dense soil all as specified and directed.

M/L for form work to sides of concrete foundation, footings, base of columns, raft and raft beams, side and soffits ( if any) of foundation and plinth beams,and similar work all as specified and directed.

M/L for form work sides of pillars, posts, struts, piers, columns and stanchions Square, rectangular all as specified and directed.

S&F Joist, channel, angle or tee sections, fixed independently, without connecting plates, etc ( cut to ordinary lengths) Fe-410W Gde E-250 all as specified and directed.

S&F hand rails, round or other steel section or core for wooden hand - rail straight portion, drilled and countersunk for blusters running bars, for doors, blusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape and directed, drilling holes , notching for wire, etc. flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting , etc. and similar work conforming to Fe-290 gde E-165 complete all as specified & directed.

S&F Framed work as in doors and gate or angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting pr other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fiting ( exclusive of steel sheeting or other covering, running railsand guids) and hanging, also fastening and fixing complete conforming to Fe-290 gde E-165 complete all as specified & directed.

S&F for mild steel round bars 10mm dia and over cut to lenth, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or secring with clips Fe- 410-W (Gde E- 250). completd all as specified and directed

S&F Mild steel screw bolts ( machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exc 5cm but n. exc 10 cm and dia of neck 5 to 10mm all as directed and specified.

Supply only MS galvanised chain link fencing of mesh size 75mm x 75mm and 4 mm dia of wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails, straining bolts, etc, including provision of binding wire complete all as specified and as directed.

M&L applying two coats of synthetic enameled paint over a coat of red oxide zinc chrome primer on new steel surfaces over 10 cm width or girth including preparation of new surfaces all as specified and directed.

S&F study table folding type of (size 60x60cm) made of 18mm thick Medium density fiber board exterior grade with lamination including 1mm thick leepted heavy dity SS collapsible shelf bracket 508mm-02 Nos etc as per site requirement, fixed on wall all as directed by Engr- in charge.

Expose the first joint of masonry structure at ground level horizontally. The plaster must be knocked off at least 50 cm beyond the visible penetrated area. Damaged mortar joints are to be scraped out to a depth of approximately 2-3 cm drilling holes 10mm diameter in masonary structure along the side of the joints at 45 degree so as to cross the bick/ block at the intervals spacing of 10-30 cm depending on extent of rising dempness as per recommendation of Engr- in- charge, Cleaning of hole:- Clean the hole by air blower proir to fixing nozzles. Install Sika @ packer injection packers 9.8mm diameter, 10cm long in the holes and tighten. Fix the packet securely using Sikadar 31. Cutting of packers :- Cut the packers after completion of grouting without damaging structural elements.

Supply and apply of a 3 part, very 10W viscous elastic polyacrylic injection resin Sika @ Injection 306 with a versatile and adjustable reaction time having mixed viscosity : 3-11 M pa s at + 20 degree C, reaction time: adjustable according to ambient temperature and execution requirement between 8-50 Mins PH - 9-10. Tested as per wissbau No 2002- 094- (1A) function test with re- injectible hose system. The holes should be drilled until a depth of approx 5 cm ( for a 6cm thick wall) before the end of the wall is reached. Pump Sika @ injection- 306@ at > 20 bar into a behind fissures or into masonry joint wich are allowing water to infiltrate into unwanted area if voids is masonry being injected contain insufficient moisture to activate the grout inject a small amount of water prior to injecting the grout when movement stop or Sika @ injection - 306 appears at the next packer move to the next packer and inject. If the dampness is heavy inject similarly at next joint line.

M & L for vitrified tile 10-12 mm thick (Square/ rectangular) dark shade area of each tile exceeding 0.42 Sqm not exceeding 1.00 Sqm, in floor etc including set & jointed in adhesive of thickness 5-6 mm and pointed in coloured epoxy to match including old floor grinding to become old surface level & even and self leveling compound to smooth out old thin set for laying floor finishes complete all as specified and approved by GE

M & L for vitrified tile 10-12 mm thick (Square/ rectangular) dark shade area of each tile exceeding 0.42 Sqm not exceeding 1.00 Sqm, in skirting etc including set & jointed in adhesive of thickness 3-4 mm and pointed in coloured epoxy to match including old wall grinding to become old surface level & even and self leveling compound to smooth out old thin set for fixing of tiles complete all as specified and approved by GE

S&F in repairs fancy type stainless steel brackets suitable for holding of 25 mm drapery rod including brass screw and necessary fitting complete all as specified and directed

S&F in repairs fancy type wooden finish powder coated fanials for 25 mm drapery rod complete all as specified and directed

S&F 75 mm bore cast iron cowl fixed in repairs complete all as specified and directed

S&F 100 mm bore cast iron cowl fixed in repairs complete all as specified and directed

M&L for Pre- cast factory made kerb stone of PCC 1:2:4 type B1 ( 20mm graded stone aggregate) of size 300x300x150mm fixed in CM 1:4 mortar , complete all as specified and as directed.

Preparation of newly concrete Surface of any description over 10cm girth or width, not otherwise described and apply two coat synthetic enamel paint over a coat of primer complete all as specified and directed

S&F 25mm thick RCC jalli in ventilator opening including cutting of grooves in opening and making good the disturbed surface with cement mortar 1:3 including removal of debris if any complete all as specified and directed.

M&L rendering 15mm thick in CM 1:6 on fair faces of brick or concrete surfaces of walls, facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed

M&L rendering 5mm thick in CM 1:3 on fair faces of brick or concrete ceiling surfaces , facia etc to be finished even and smooth (w/o using extra cement) complete all as specified and directed

Description of Work / Item(s)

Amount

Taking down old unserviceable point wiring with and including existing conduit / batten type (light, fan, socket or power point) complete such as tube light any type switches, ceiling rose, pendent holder, regulator and socket etc and removing the material from site with chasing and cutting surface of wall / floor/ ceiling etc complete all as directed.

Taking down existing sub main wiring aluminium/copper of size 4/6 sqmm complete all as specified and directed. Note:- The two run of 4/6 Sqmm wire, one run of 4/6 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.

Taking down existing sub main wiring aluminium/copper of size10 sqmm complete all as specified and directed. Note : 1. The four run of 10 Sqmm wire, one run of 10 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.

Material and labour for point wiring complete with 1.5 Sq mm (nominal area) FRLS PVC insulated un-sheathed and stranded copper conductor cable ISI marked including cutting and chasing and PVC concealed conduit ISI marked of size 20 mm bore medium grade and PVC conduit fittings such as tees, bends, elbow, reducers including FRLS PVC insulated unsheathed 1.5 Sqmm copper earth wire, connecting to common earth dolly with and including ordinary/modular Metal flush boxes with modular white cover plates of any module suitable for fixing modular switches / sockets / fan regulator of any type etc and making good surface as original by plastering and whitewash/ colour/ distemper etc, for one light point / fan point / exhaust fan point / bell / buzzer controlled by one 1-way switch/ bell push complete all as specified and directed. Note: Existing conduit shall be used in ceiling / roof of building.

All as per srl item No. 4 here in before but point wiring for one socket outet point 5/6 amps on the same board.

All as per srl item No. 4 here in before but point wiring for one socket outet point 5/6 amps on the independent board.

All as per srl item No. 4 here-in-before but with 2.58 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for one socket out let 5/6 Amps on independent board.

All as per srl item No. 4 here-in-before but with 2.5 sq mm FRLS copper wire with 2.5 Sqmm FRLS copper earth wire for socket out let 5/15 or 6/16 Amps on independent board.

All as per srl item No. 4 here in before but point wiring for one light point controlled by two Nos of two way switches

Material and labour for Sub main wiring with 2 run of 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including one run 4 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB/Panel to sub DB complete all as directed. Note : 1. The two run of 4 Sqmm wire, one run of 4 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.

Material and labour for Sub main wiring with 2 run of 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including one run 6 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB/Panel to sub DB complete all as directed. Note : 1. The two run of 6 Sqmm wire, one run of 6 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.

Material and labour for Sub main wiring with 4 run of 10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked, drawn in and including PVC conduit with wall thickness 1.6mm thick and including one run10 Sqmm (nominal area) FRLS, PVC insulated, unsheathed and stranded copper conductor cable ISI marked as earth wire, connected with thimble from main DB/Panel to sub DB complete all as directed. Note : 1. The four run of 10 Sqmm wire, one run of 10 Sqmm wire and 1 mtr PVC conduit pipe will be measured as one unit.

S&F of Switch piano flush type, single pole, one way, 5/6 Amps complete all as directed.

S&F of switch piano flush type, 6 amps two way,SP,230 volts AC all as specified.

S&F of switch piano flush type, 16 amps one way,SP,230 volts AC all as specified

S&F of socket flush type, 6 amps 2 & 3 pin combined,230 volts AC all as specified

S&F of socket outlet flush type, 2 in 1, 6/16 amps 3 pin combined, 230 volts AC all as specified.

S&F of electronic fan regulator, step type, socket size and making all necessary connections complete all as directed.

S&F of Bell push switch piano flush type, single pole, one way, 5/6 Amps complete all as directed.

Supply & fixing of Modular switch 6 Amp, 1 way, 1 module size complete all as directed.

Supply & fixing of Modular switch 2 way 6A,1 module size complete all as directed.

Supply and fixing of Modular switch 16 Amp, 1 way, 1 module size complete all as directed.

Supply and fixing of Modular socket 6 Amp, 3 pin, 2 module size complete all as directed.

Supply and fixing of Modular socket 6/16 Amp, 3 pin, 2 module size complete all as directed.

Supply and fixing of Modular Fan regulator step type, 100 watts, 1 Module size complete all as directed.

Supply and fixing of Modular Bell push switch 6A with indicator lamp, 1 Module size complete all as specified and directed.

Supply & fixing Bell Buzzer, Ding Dong single phase AC Supply 230 volts complete all as directed.

Supply and fixing of Ceiling rose, insulated body, 3 terminal, 240 volts, 5 Amps with and making good surface as original by plastering and whitewash/ colour/ distemper etc complete all as directed.

Supply & Fix Lamp holder, PVC/Polycarbonate type with back plate suitable for batten fittings all as directed by Eng- in Charge.

Supply and fix in replacement of 20 Amp Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB complete all as specified & directed by Engineer-in-charge.

S&F in replacement LED tube light fitting 18/20 watt (CW) , 4 feet long in extruded aluminium batten with high efficient LEDs available in milky diffuser and Color Rendering Index (CRI>70), IP20, correlated Color Temparature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V complete all as specified & directed.

S&F in replacement tube light fitting 10 watt (CW), 2 feet long in extruded aluminium batten with high efficient LEDs available in clear & milky diffuser and Color Rendering Index (CRI>70), IP20, correlated Color Temparature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V complete all as specified and directed.

Supply and fix in replacement Building security light with high efficient high power LED street light 25 watt with lens with pressure die cast aluminium housing and enclosed with toghened glass IP-66 including service bracket 1.2 mtr long by using 32 mm bore GI pipe and fixing accessories ( Clips, Fasteners, Nut, Bolts etc) and Color Rendering Index (CRI>70), IP20, correlated Color Temparature (CCT- 5700K to 6500K) , PF>0.9 and Voltage rated 220V to 240V etc complete all as directed.

Supply and fix study light, decorative wall mounting, brushed nickel finish fixture with acrylic diffuser suitable for 9 W LED lamp B22 base complete all as specified & directed.

Taking down carefully ceiling fan/exhaust fan of any size & make including disconnection of electric connection, complete all as specified and directed.

M&L for painting of ceiling fan / exhaust fan of any size & make complete with synthetic enamel paint by spraying including filling cavaties with filter one coat after cleaning complete all as specified and directed.

Fixing only with fixing accessries celing fan and connecting with and including 3 core flexible copper cable from ceiling rose to fan complete all as specified and directed.

Fixing only with fixing accessries exhaust fan and connecting with and including 3 core flexible copper cable from ceiling rose to fan complete all as specified and directed.

Supply and fix ceiling fan complete with three blade, down rod, remote & other accessories 230V, 1200mm sweep, with brushless direct current (BLDC) motor, 5 star rating complete all as specified and directed.

Supply and fix in replacement of Distribution Board double Door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating and IP 43 & IK 09 protection, surface mounting, SPN 4 way, 240 volts with bus bar rating 200 Amps, dust and vermin proof suitable for incorporation of MCB’s and isolators etc and making all necessary connections complete all as specified and directed.

All as srl item no 40 here in before but of SPN 8 way type.

All as srl item no 40 here in before but of SPN 12 way type.

S&F in replacement distribution board double door made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 4 way, 415 volts with copper bus bar rating 250 Amps for each phase, dust and vermin proof and IP 43 protection for provision of MCBs as required at site including necessary cutting chasing and making good the disturbed surfaces complete all as directed.

S&F in replacement distribution board with MCCB Incomer double door vertical type made out of CRCA mild steel sheet surface with insulated material like polyester or with epoxy powder coating, TPN 8 way, 415 volts with copper bus bar rating 250 Amps for each phase, dust and vermin proof and IP 43 protection for provision of MCCB, MCBs as required at site including necessary cutting chasing and making good the disturbed surfaces complete all as directed.

M&L in replacement SP, 6 to 32 Amp rating, 'C' Curve type, 240 V, 10kA MCB with over load and short circuit protection complete all as directed.

All as srl item no 45 here in before but of SPN, 40 to 63 amps rating MCB

M&L in replacement TPN, 40 to 100 Amp rating, 'C' Curve type, 415 V, 10kA MCB with over load and short circuit protection complete all as directed.

S&F in replacement of MCCB, 415 volts, four pole of capacity 160 Amps, 36 KA, ICS = 100% ICU, with Thermal - Magnetic Release, including spreader terminals, phase barriers, thimbles of suitable size etc and making electric connections and taking down old unserviceable MCCB, complete all as directed.

Description of Work / Item(s)

Amount

Supply and installation of water cooler 40/80 Ltr, electric driven (single phase) 230 Volts, 50 Hz AC, with energy efficiency fully stainless steel and eco friendly non CFC refrigerant, including connected pipe from water main to water cooler complete all as directed.

Supply and fix desert cooler electric driven (single phase), having nominal air flow capacity of 4000 CuM per hour (or nearest size).Plastic Body including float valve for water pipe line connection ,complete all as directed.

M & L for point wiring with 1.5 Sq mm (Nominal area) PVC insulated FRLS unsheathed copper cable of 1100V grade with stranded copper conductor in and including PVC conduit surface/conceil wiring with connected accessories along with continuous earth wire of 1.5 Sq mm PVC insulated, copper conductor cable and connected to common earth dolly with and including sunk MS pressed steel terminal boxes with 2.8 mm thick hylam sheet cover fixed with brass screw complete with all accessories for one power point controlled by one ,one way switch completeall as directed

All as per item No 3 here in above but 2.5 Sq mm copper wire

S&F Socket outlet 2 in 1, 3 pin, 6 Amps Capacity complete all as directed.

S & F switch piano flush type single pole ,one way 6 Amps complete all as directed.

S&F Socket outlet 2 in 1, 3 pin,5 and 15 Amps complete all as directed.

S & F Switch , flush type single pole one way 15 A capacity complete all as directed.

S & F tube medium grade 15 mm bore galvanised with all fitting laid down in the wall including grouting and making good distrub surface complete all as directed.

S & F gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed bore 15 mm complete all as directed.

Description of Work / Item(s)

Amount

Excavating in trenches in soft / loose soil, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth and getting out complete all as specified and directed.

Material and labour for river fine dry sand filling under floors or in foundations including watering and consolidation for under ground cable complete all as specified and directed.

Supplying and laying of old size, common burnt clay building bricks, sub-class ‘B’ designation 75 for cable protection complete all as specified & directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of excavated material not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.

S&F of GI pipe of 100 mm nominal dia light grade with all fittings laid in trenches or under road crossing or fixed to walls/poles with clamps nuts, bolts and washers for cable laying complete all as specified and directed.

All as per srl item No 6 here-in-before but for GI pipe of 80 mm dia size.

M&L for road cutting of average size 0.40 m x 0.60 m for laying of GI pipe, including excavation, returning filling in, spreading, levelling well ramming in layers, soling with broken boulders/stones, WBM 7.5 cm thick coarse aggregate received from dismantling the existing road, premix carpeting 25 mm thick using ready mix patch material, rolled and compacted for road patch repair work, complete all as specified & directed.

All as per Ser Item No 9 here-in-before but of size 70 sqmm x 3.5 Core complete all as specified and directed.

All as per Ser Item No 9 here-in-before but of size 120 sqmm x 3.5 Core complete all as specified and directed.

All as per Ser Item No 9 here-in-before but of size 185 sqmm x 3.5 Core complete all as specified and directed.

All as per Ser Item No 9 here-in-before but of size 240 sqmm x 3.5 Core complete all as specified and directed.

Supply and fixing LED flood light 120 watt 230 V, AC, outdoor type with thermal management in multiple optics and equipped with IP66 protection, with impact and corrosion resistant complete with driver, lamp and fixing accessories nut, bolts, Clamps, bracket etc, complete all as specified and directed.

Supply and fixing post top lantern LED type 35/40 watt 230 volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver, lamp and fitting accessories nut, bolts, suitable dia SS-304 pipe, complete all as specified.

Taking LT supply shutdown, disconnecting all electrical connection, taking down existing old / unservicable LT panel from its position incl all accessories and demolishing old plateform complete all as specified and directed. Note: Contractor shall be responsible for alternate arrangment of LT Supply with suitable capacity of LT cables if uninterrupted power supply is required as and when directed by Engr-in-charge. No exrtra cost will be paid to the contractor on this account.

Supply, fabricate, install, test and commissioning of LT control panel outdoor type, powder coated, weather proof, dust proof, vermin proof, made out of 3.15 mm thick CRCA sheet front and back openable door, angle iron frame and locking arrangement with pad lock, including suitable working space in bus bar chamber, cable box chamber with alley suitable for 3 phase 4 wire system, 415V, 50 Hz, AC supply including aluminium bus raisers with PVC sleeves/ tape RYB colours for phases identification, including all bus raiser shall be extend upto cable box chamber fixed on fibre insulation for RYB & neutral to all out going cable, confirming to IP-54 and fixed on raised PCC platform with PCC 1:2:4, type B1 (20mm graded aggregate) raised base with control wiring with comprising cable gland brass, copper lugs, phase barriers, spreader terminals,DANGER plate and Panel & outgoing shall be marked etc. (Loc: Behind cook house-1)

INCOMING

(i) 1600 Amp aluminium bus bar TPN system.

(ii) ACB 4 Pole, 415 V, Manual Drawout type with microprocessor release of capacity 1000 Amps, 50 Hz, 60 kA - 01 No

(iii) Change over switch On load type 4 Pole 415 volts AC 50 Hz 1000 Amps - 01 No

(iv) Indication lamp RYB for phase indication- 01 Set of three

(v) Intelligent meter with all parameter as V, A, F, PF, KW, KVA, KWh/KVAh, old energy, On and Run hours with suitable capacity of 03 Nos CT's - 01 No

OUTGOING

(i) MCCB 4 Pole 415 volts AC 50 Hz, 250 Amps, 35 kA, Adjustable Microprocessor release - 01 Nos

(ii) MCCB 4 Pole 415 volts AC 50 Hz, 200 Amps, 35 kA, Adjustable Microprocessor release- 03 Nos

(iii) MCCB 4 Pole 415 volts AC 50 Hz, 160 Amps, 35 kA,Adjustable Microprocessor release- 01 Nos

(iv) Spare MCCB 4 Pole 440 volts AC 50 Hz, 200 Amps, 35 kA, Adjustable Microprocessor release - 02 Nos

(v) angle iron frame 40x 40x 6 mm for support of panel height as directed by Engr In Charge.

All as per Ser Item No 18 here-in-before but with the following Specifications:- (Loc: Behind Cook House -2)

INCOMING:-

(i) 1000 Amp aluminium bus bar TPN system.

(ii) MCCB 4 Pole 415 volts, AC 50 Hz, 630 Amps, 50 kA, adjustable microprocessor release - 01 No

(iii) Change over switch On load type 4 Pole, 415 volts, AC 50 Hz, 630 Amps - 01 No

(iv) Indication lamp RYB for phase indication- 01 Set of three

(v) Intelligent meter with all parameter as V, A, F, PF, KW, KVA, KWh/KVAh, old energy, On and Run hours with suitable capacity of 03 Nos CT's - 01 No

OUTGOING:-

(i) MCCB, 4 Pole, 415 volts AC, 50 Hz, 200 Amps, 35 kA, adjustable microprocessor release - 02 Nos

(ii) MCCB 4 Pole 415 volts AC 50 Hz, 160 Amps, 35 kA, adjustable microprocessor release- 02 Nos

(iii) Spare MCCB 4 Pole 415 volts AC 50 Hz, 100 Amps, 35 kA, adjustable microprocessor release - 02 Nos

(iv) angle iron frame 40x 40x 6 mm for support of panel height as directed by Engr In Charge

All as per Ser Item No 18 here-in-before but with the following Specifications:- (Loc: P-94)

INCOMING:-

(i) 630 Amp aluminium bus bar TPN system.

(ii) MCCB 4 Pole 415 volts AC 50 Hz, 320 Amps, 36 kA, adjustable microprocessor release- 01 No

(iii) Change over switch On load type, 4 Pole, 415 volts, AC 50 Hz, 320 Amps - 01 No

(iv) Indication lamp RYB for phase indication- 01 Set of three

(v) Intelligent meter with all parameter as V, A, F, PF, KW, KVA, KWh/KVAh, old energy, On and Run hours with suitable capacity of 03 Nos CT's - 01 No

OUTGOING:-

(i) MCCB 4 Pole 415 volts AC 50 Hz, 160 Amps, 35 kA, adjustable microprocessor release - 02 Nos

(ii) Spare MCCB 4 Pole 415 volts AC 50 Hz, 160 Amps, 35 kA, adjustable microprocessor release - 02 Nos

(iii) Angle iron frame 40x 40x 6 mm for support of panel height as directed by Engr In Charge

Description of Work / Item(s)

Amount

M&L for Excavation in post holes ( or similar holes) each n. exc 0.5 cum, getting out soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm all specified and directed.

M&L for PCC 1:3:6 type C-2 ( Using 40mm graded stoe aggregate ) in foundation, filling and mass concrete complete all as specified.

S/F hand rails, round or other steel section or core for wooden hand - rail straight portion, drilled and countersunk for blusters running bars, for doors, blusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts posts and struts in fencing including cutting tops to shape and directed, drilling holes , notching for wire, etc. flat iron fillets ( for securing wire mesh etc.) including all necessary drilling, bolting or riveting , etc. and similar work conforming to Fe-290 gde E-165 complete all as directed.

M&L applying two coat of synthetic enameled paint over one coat of priming paints plaster coat on concrete surfacer over 10 cm width or girth including prepration of new surfacs all as specified.

Supply only MS galvanised chain link fencing of mesh size 75mm x 75mm and 4 mm dia of wire complete all as specified and as directed.

Fixing only chain link fencing including line wires, any mesh size and type to any type of standards rails, straining bolts, etc, including provision of binding wire complete all as specified and as directed.

M/L for RCC type B1 1:2:4 ( using 20mm graded stone aggregate) as in columns, pillars,piers, posts and struts complete all as specified and directed.

S&F for mild steel TMT bars 10mm diaand over cut to lenth, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or secring with clips completd all as specified and directed.

S/F Framed work as in doors and gate or angle or other section with gusset plates, rails, braces, etc. complete drilled for fixing of steel sheeting pr other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fiting ( exclusive of steel sheeting or other covering, running railsand guids) and hanging, also fastening and fixing complete conforming to Fe-290 gde E-165 complete all as directed.

M/L 18- 20 mm thick granite of any type work (table rubbed and polished ) in steps, jambs, pillars, window cills, cooking platforms incuding 10mm thick rendering in CM 1:4 as a backing coat including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

S&F for mild steel round bars 10mm dia and over cut to lenth, bent to shape required including cranking, bending hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or secring with clips Fe- 410-W (Gde E- 250). completd all as specified and directed

M/L for surface excavation n. exc 30 cm deep and averaging 15 cm deep and getting out soft/ loose soil complete all as directed.

M/L for rolling and consolidating formation surfaces with power roller exc 8 tonne & n. exc 12 tonne complete all as directed.

M&L for PCC 1:4:8 type D-2 ( Using 40mm graded stoe aggregate ) as in sub base complete all as specified.

M&L for 50mm Sand filling under floors or in foundations including watering and consolidation complete all as specified.

M&L for Machine pressed rubber moulded precast concrete interlocking paver block ultra finish with epoxy coating any shape and size and conforming to IS 15658- 2006 of 60mm thickness M-35 Grade all as specified and directed.

M&L for precast factory made kerb stone of PCC 1:2:4, type B-1 of size 300x300x150mm fixed in CM 1:4 complete all as specified and as directed.

M&L for removing excavated material exc 250Mtr but n. exc 500mtr depositing where directed all as specified.

S&F MS Bolt n.exc 10mm dia and 50mm long alongwith washer complete all as specified and directed

M&L for form work sides of pillars, posts, structs, piers, columns and stranchions square, rectrangular complete all as specified and directed

Description of Work / Item(s)

Amount

Material and labour for 20 meter high galvanized mast light suitable for 6 to 9 lantern symmetrically fitted along with their control gear and having two point suspension system with stainless steel wire rope of 6 mm dia 97/19 guage and double drum winch with luminaire mounting arm, pully assembly, aviation obstruction light, lightning arrester spike including RCC foundation as per height 20 meter with complete electrical wiring from bottom to top by suitable size multicore cable, junction box and contol gear along with LT feeder pillar box with necessary control accessories such as timer, MCB, Contactor as required for completion of the job complete all as specified and as directed. Note: (i) In HM light, cost of luminaires will be measured and paid separately under respective items of this sch. (ii) In HM light, Rates are inclusive of cost of foundation as per 20 meter height.

Supply and fixing flood light LED flood light 300 watt 230 V, AC, 50Hz, outdoor type with thermal management in multiple optics and equipped with IP66 protection, impact & corrosion resistant and made up of exclusive innovative die-cast aluminium housing with toughened glass, high power LEDS with secondary lens including driver, lamp and other connected accessories complete all as specified and directed. Make : Havells Cat Part No. JETAIRISMAXFL300WLED757PWBLTG or equivalent make of Phillips/Eveready.

Excavating in trenches in soft / loose soil, not exceeding 1.5 meter wide and not exceeding 1.5 meter in depth and getting out complete all as specified and directed.

Material and labour for river fine dry sand filling under floors or in foundations including watering and consolidation for under ground cable complete all as specified and directed.

Supplying and laying of old size, common burnt clay building bricks, sub-class ‘B’ designation 75 for cable protection complete all as specified & directed.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick complete all as specified and directed.

Removal of excavated material not exceeding 50 meters and depositing where directed at a level not exceeding 1.5 meter above the starting point complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm x 4 core complete all as specified and directed.

S&F street light panel outdoor type, made up of 3.15mm thick CRCA sheet, 3 phase frame size 2 of max load 12 kW, capacity 65 A, 3 Pole incl Digital timer, power contactor 65 Amp, MCB 63 Amp, 4 pole, indicator lamps with switch for bypass arrangment and fixing by making proper foundation with angle iron frame or fixed in pole all as directed by Engr -in-charge. Make : Indoasian Cat Ref No TL065DB0 or equivalent model of L&T/Havells.

Description of Work / Item(s)

Amount

M&L for Surface excavation (not exceeding) 30 cm deep and averaging 15 cm depth and getting out hard/dense soil complete all as specified and directed

Excavation in hard/dense soil in post holes (or similar holes) eache n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25cm and removing excavated material to low line area from MoD land complete all as specified and directed

Demoltion of cement concrete (Unreinforced) in ground floor and paving n exc 15cm thickness (below or above ground level) complete all as specified and directed

M&L Cement concrete type C2 1:3:6 (40mm graded agg) in foundations, filling and mass-concrete in walls or retaining walls, any thickness, size or shape including pilasters, buttresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed

S&F Steel work in tubular trusses medium graded including special shaped washer etc. (Post height appx 4 to 5 m) complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed

Preparation of newly steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed

S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm of an colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed

S&F Pre- painted galvatume aluminium zinc coating GI based plain sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping, screws complete all as specified and directed

Forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade `A' thickness of concrete 100mm complete all as specified and directed

Forming Construction joint 30mm deep x 10mm wide filled with sealing compound Grade 'A' complete all as specified and directed

M&L for hardcore of guage exc 63mm but n.exc 100mm, deposited, spread and levelled in layers n. exc 15 cm thick, watered and rolled/ rammed to a true surface complete all as specified and directed

M&L for 100 mm thick PCC 1:4:8 type D-2 ( Using 40mm graded stone aggregate ) as in sub base complete all as specified and directed

M&L for 75 mm thick PCC 1:2:4 type B1( Using 20mm graded stone aggregate ) as in flooring finished even and smooth surface complete all as specified and directed

M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in roof kerbs, mud stops, rounded or chamfered on edges, coping etc complete all as specified and directed

S&F Hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embedding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.), plates including all necessary welding, drilling, bolting or riveting, etc., and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed

Removing excavated/debris material exc.50 m but n exc 250 m including loading/unloading and stacking at the destination out side MoD premises, complete all as specified and directed

M&L for Pre- cast factory made heavy duty kerb stone of PCC 1:2:4 type B1 ( 20mm graded stone aggregate) of size 300x300x150mm fixed in CM 1:4 complete all as specified and directed.

Preparation of newly concrete Surface of any description over 10cm girth or width, not otherwise described and apply two coat synthetic enamel paint over a coat of primer complete all as specified and directed

Global Enterprises

India Guniting Corporation

Siya constructions

Pooja Singla Builders And Engineers Pvt Ltd

India Guniting Corporation

Global Enterprises

Pooja Singla Builders And Engineers Pvt Ltd

Global Enterprises

Siya constructions

India Guniting Corporation

Pooja Singla Builders And Engineers Pvt Ltd

Global Enterprises

Siya constructions

Global Enterprises

India Guniting Corporation

India Guniting Corporation

Siya constructions

Global Enterprises

India Guniting Corporation

Siya constructions

Global Enterprises

Bidder Name

Pooja Singla Builders And Engineers Pvt Ltd

Global Enterprises

Siya constructions

India Guniting Corporation