Upgradation of Teaching facilities by way of construction of 200 Bedded Hospital at Government Medical College Baramulla

Amount

FRAMED PART ONLY

EARTH WORK

Surface dressing of the ground incluind removing vegetation and inequalties not exceeding 15 cm deep and disposal of rubbishlead upto 50m and lift upto 1.5m (All Kinds of soil) including dewatering etc

Earth work in bulk excavation by mechinical means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including dewatering, disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge.including dewatering etc

All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead upto 50 m and lift upto 1.5 m including all dewaterings

Providing and laying Stone soling/Sand matrix filling in under foundation /foundation trenches etc in layers not exceeding 20 cm in depth consolidating each layer by rammng, watering including all leads and liftscomplete job

Supplying and filling in plinth with sand matrix /khak bajree under floors, including watering, ramming, consolidating and compaction complete as directed by the Engineer incharge including all leads and lifts up to site.

Extra for every additional lift of 1.5 m or part thereof in excavation/banking excavated or stacked material :

All kinds of soil

Providing and laying Stone soling/Khak Bajree filling in under foundation /foundation trenches etc in layers not exceeding 20 cm in depth consolidating each layer by rammng, watering including all leads and liftscomplete job

CONCRETE WORK

Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with:

1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 mm nominal size) including dewatering

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast or stone soling 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete

REINFORCED CEMENT CONCRETE WORK

Centering and shuttering including strutting, propping etc. and removal of form for:

Foundations, footings, bases of columns etc. for mass concrete. Including dewaterings

Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc.

Columns, pillars, piers, abutments, posts and struts.

Shelves (cast-in-situ)

Stairs (excluding landings) except spiral staircases.

Extra for shuttering in circular work (20% of respective centering and Shuttering items)

Edges of slabs and breaks in floors and walls

Under 20 cm wide

Suspended floors, roofs, landings, balconies and access platform with waterproofing ply 12 mm thick

Lintel, beams, plinth beams, girders, bressumers and cantilevers with waterproofing ply 12 mm thick

Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de-shuttering and de-centering at all levels, over a height of 3.5 m, for every additional height of 1 meter or part thereof (Plan area to be measured).

Suspended floors, roofs, landings, beams and balconies (plan area to be measured)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level

Thermo-Mechanically Treated bars of grade Fe-500D or more.

Providing and laying in position machine mixed design mix M-25 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix but excluding the cost of centering, shuttering, finishing and reinforcement, including any admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer-incharge.

All work upto plinth level includings dewaterings

All work above plinth level upto floor V level

Extra for providing richer mixes at all floor levels. Note:- Excess/ less cement over the specified cement content used is payable/ recoverable separately.

Providing M-30 grade concrete instead of M-25 grade BMC/RMC.

Providing M-40 grade concrete instead of M-25 grade BMC/RMC.

STEEL WORK

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

welded

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting , hoisting , fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.

Electric resistance or induction butt welded tubes

Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, ncluding a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

0.50 mm thick with zinc coating not less than 275 gram/sqm

Extra for straight cutting in C.G.S. sheet roofing for making opening of area exceeding 40sq.decimetre for chimney stacks, sky light etc. 0.80 mm/0.63 mm/0.50 mm thick

Providing ridges/valleys of width 60-90cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2

Providing and fixing plained eaves boarding of 2nd class Deodar wood 300x40 mm (nominal size)

Providing and Fixing 1.0 mm thick CR Sheets in eaves projection including necessary frame work of 40x40x6 angle iron and 35x 5 mm flats

Demoslishing

Demolishing R.C.C. work manually/by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Demolishing brick work manually/by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge:

Brickwork in clay fly ash(non-modular) bricks of class designation 7.5 in superstructure above plinth level upto floor five level and curing completion.Cement mortar 1:6(1 cement:6 coarse sand)

Half brick masonary with common burnt clay(non- modular) brick of class designation 7.5 in super structure upto floor v lvl. Cement mortar 1:3 (1 cement:3 coarse sand)

Extr. Or for providing 6mm dia. Bars 2 nos. at every third course of half brick masonry.

Cement concrete (cast in situ)

Providing and laying in position cement concrete of specified grade including curing but excluding cost of centering and shuttering. 1:2:4(1 cement :2 coarse sand:4 graded stone aggregate, 40mm nominal size

Providing and laying in position cement concrete of specified grade including curing but excluding cost of centering and shuttering. 1:3:6 (1 cement :3 coarse sand:6 graded stone aggregate, 40mm nominal size

Double charged Vitrified floor tiles Providing and laying vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorption less than 0.08% and confirming to IS:15622 of approved make, to all colours and shades laid on 20mm thick cement mortar 1:4(1 cement:4 coarse sand including grouting the joints with white cement and matching pigment etc. complete

Size of tile 600x600mm.

Grouting the joints of flooring tiles having joints of 3MM width using epoxy grout mix of 0.70 KG of organic coated filler of Desired shade zero point 10 KG of partner and 0.20 KG of resin/kg) Including feeling grouting and finishing complete as per the directions off the engineer in charge .

Providing and laying vitrified tiles in different sizes( thickness to be specified by the manufacturer with water absorption less than 0.080% and confirming to IS:15622) of approved make, in all colours and shade in skirting, riser of steps over 12mm thick bed of cement mortar 1:3( 1 cement:3 coarse sand) mix, grouting the joints with white cement and matching pigments etc. complete. Size of tile 600x600mm @153.85/m.sq(wall cladding)

Providing and fixing of granite molding with approved for locking off skirting wall cladding in cement motor 1:3 mix making good the joints.

Providing and fixing is quality ceramic glazed floor tiles confirming to IS:15622 ( Thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by engineer in charge in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 and joining with grey cement slurry @3.30kg per sq.m including painting in white cement mixed with pigment of matching shade complete.

Providing and laying off non slippery tiles on floors over a cement motor of 20M thick to proper grade and joining with Gray cement with pigment complete

Providing and laying ceramic glazed floor tiles 300x300mm thickness to be specified by the manufacturer) of first quality conforming to IS :15622 of approved make laid on 20MM thick bed of cement mortar 1:4(1 cement 4 coarse sand including painting of joints with white cement and matching pigment etc. complete .In all colors shades except white, ivory,fume red brown

Extra for prefinished nosing in treads of steps or granite stone slab

Kota stone slab flooring 25MM thick over 20MM thick base laid over and jointed with Gray cement slurry mixed with pigment to Gray cement slurry mixed with pigment to Gray cement slurry mixed with pigment to match the shape of this lab including match the shape of this lab including match the shape of this lab including match the shape of this lab including match the shape of this lab including rubbing polishing and curving complete with base of cement motor 1:4

Providing and fixing collapsible steel shutters in position with vertical channels 20 x10 x 2MM and braced with flat iron diagonal, 20x5MM size with top and bottom rail of T- section iron 40x40x6mm, with 40mm dia. Steel pulleys, complete with bolt nuts ,locking, arrangements, stoppers ,handles including applying priming coat of approved steel primer’s.

Providing and fixing hand rail Off approved size by melting etc to structural steel ladder railing, balcony railing ,staircase railing and similar works including applying priming coat of approved steel primer .

Providing and fixing stainless steel (grade 304) railing made of hollow tubes channels plates etc. including welding, grinding, buffing ,polishing and making curvature wherever required and fitting the same with necessary stainless steel nuts and bolts complete including fixing off the railing with necessary accessories and stainless steel dash fasteners stainless steel bolts etc. of required size on top of the floor or the side of waist slab with Suitable arrangements as per approval of the engineer in charge( for payment purposes only weight of stainless steel members shall be considered excluding fixing accessories such as nuts ,bolts fasteners etc.

Providing and fixing Factory made upvc door frames made of U PVC extruded sections or size 65mmx 55mm with wall thickness 2mm corners of door frame to be mitred cut and fixed With plastic brackets and stainless steel screws reinforcing change side vertical of the frames with PVC profile of size 28MMx30MM having wall thickness 2mm including providing and fixing 3 no’s of 125MM long stainless steel hinges to the frame fixing the frame with required number and size of anchor dash fasteners all complete as per manufacturers specification and direction of engineer in charge.

Providing and fixing 37MM thick factory made PVC door, shutters, styles and rails made of PVC Hollow section off size 100MMx 37MM with wall thickness 2mm with inbuilt bad on one side styles and rails mitred cut and point at the corners by means of 2 no’s plastic brackets of size 75MMx220MM at each corner and stainless steel screws reinforcing the inside of style by inserting PVC profile off size 28MM x30MM with wall thickness to MM will be fixed to the vertical styles. Providing with PVC snap fit beads and panel of size 100 MMx 20MM and inserting 2 number type pause of 6MM diameter and fastening with nuts and washers complete all as per manufacturers specification and direction of engineer in charge.

Providing and fixing factory made upvc white color glazed windows comprising of upvc multi-chambered frame sash and fixed glazed window comprising of upvc wherever required extruded profiles only reinforced with 1.600 MM thick galvanized mild steel section made from roll forming process of required length ,shape and size according to upvc profile) upvc extruded glazing beads of appropriate dimensions EPDM gasket stainless steel SS304 grade fiction hinges zinc alloy (white powder coated) casement handles ,G.I fasteners 100MM x 8MM size for fixing frame to finish walls plastic patches plastic caps unnecessary SS screws etc profile of frame and sash Shall be mitred cut& infusion welded at all corners, mullion ( if required ) Shall be also fusion welded including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame an adjacent finished wall shall be filled with weatherproof silicone sealant over Becker rod of required size and of approved quality and complete as per approval drawing and directions of engineer in charge( single) double glass panes and silicone sealant Shall be provided for separately .

Providing and fixing stainless steel made fiction hinges to the side/ top lining upvc windows or approved quality with necessary stainless steel screws etc as per direction of the engineer in charge .

Providing and fixing casement handles made of zinc alloyed( white powder coated) in upvc casement windows with necessary screws.

Providing and fixing framework four partitions wall lining etc. made of 50x50x 1.60MM hollow MS tube placed along the walls ceiling and floor in a grid pattern with spacing@ 60 cm c/c both ways or at required spacing near opening, with necessary welding at junctions and fixing the frame to walls ceilings, lining/ floors with steel dash fasteners of 8mm diameter 75 mm long bolt and making provision for opening of doors windows electrical conduits switchboards etc. and providing of two coats of approved steel primer etc. complete all as per direction of engineer in charge .

Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1cement : 4 coarse sand) laid and jointed with cement slurry and pointingwith white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified andas directed by the Engineer-in-Charge including nosing mouldings

Granite Work :- Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 16-18mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. Polished Granite stone slab.

15MM cement plaster on rough side or single and half brick wall of mix 1:6 (1 cement:6 coarse sand)

15MM cement plaster on rough side of single or half brick wall of mix. 1:4 (1 cement: 4 coarse sand)

Providing and applying white cement based putty of specified thickness of approved brand and manufacturer over the plaster surface to prepare the surface even and smooth .

2MM thick

Wall painting with acrylic emulsion paint having BOC volatile organic compound content less than 50 grams per liter of approved brand and manufacture including applying additional coat wherever required to achieve even shade and color ( 2 or more coats)

Forming grooves of uniform size in the top layer of washed stone great plaster cement plaster as per approved pattern using wooden Battens nailed to the under layer including removal of wooden battens repair to the edges of panel and finishing the grooves complete as per specifications

20mm Cement plaster of mix: 1 : 6 ( 1 cement : 6 coarse sand) Extrnal surgace for height upto 5th floor

Providing and applying texture based putty of specified thickness of approved brand and manufacturer over the plaster surface to prepare the surface even and smooth (1 to 2mm thk) for height upto 5th floor

Finishing walls with textured exterior paint of required shade :on new work( two or more codes applied @ 3.28kg/10sq.m) Over and including base coat of exterior primer applied at the rate 2.20 KG /10 sq. m for height upto 5th floor

Providing and fitting of false ceiling at all heights up to 10 ½ft including providing and fixing and of frame work made of specified sections power pressed from Ms sheets and galvanized with zinc Coating of 120 gram per square meter including fixing of gypsum calcium board as per the drawing and specifications and direction of the Engineer in charge including cost of painting with BIS specification marks Ground floor 500 meter square First floor 700 meter square Second floor 600 meter square

Lettering with oil based paint of approved brand for signage boards whererever applicable

Letters of up to 5 centimeters height

Letters of up to 10 centimeter height

Reinforced cement concrete work in beams suspended floors roofs having slope up to 15 landings balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral staircases up to 5 level including curing but excluding the cost of centering shuttering finishing and reinforcement for lintel beams, sun shades etc (in M25 grade)

Providing and fixing glazing in aluminum/ upvc door, window, ventilator Shutters and partitions etc complete as per architectural drawing And the directions of engineer in charge of aluminum snap beading Shall be paid in basic with EPDM rubber / neoprene gasket etc. With floating glass frames of 40MM thickness weight not less than 10 KG per square meter

Providing and fixing anodized aluminum grills (anodized transparent or dyed to required shade acc. To IS:1868 minimum anodic coating of grade AC 15) of approved design/ pattern with approved standard section and fixed to the existing window frames with c.p brass stainless steel screws @200mm c/c mid. Cutting the grill to size of opening for framing and operation of handles and fixing approved anodized aluminum standard section around the opening, all complete as per requirement and direction of engineer in charge ( only wt. of grill to be measure for payment)

Filling the gap in between Aluminum/ stone/ wood/ upvc frames and adjacent rcc/ brick/ stone/ wood/ ceramic/ gypsum work by providing weather structural non-sag elastomeric PU sealant over basher rod or approved quality as per the architectural drawings and direction of the engineer in charge. Complete

Up to 5mm depth & 5mm width

Up to 10mm depth & 10mm width

Up to 20mm depth & 20mm width

Providing and laying water proofing treatment in sunken portions of WC’s bathroom etc. by applying cement slurry mixed with water proofing cement compound consisting of applying. (a)First layer or slurry of cement @0.400 kg/ m.sq mixed with water proofing cement compound @ 0.253 kg/ m sq.. this layer will be allowed to air cure for 4 hours (b)Second layer of slurry of cement 20.242 kg/ m sq. mixed with water proofing cement compound @ 0.126 kg/ m sq. This layer will be allowed to air cure for 48 hours. The rate includes preparation of surface treatment and sealing of all joints, corners, functions of pipes and masonry with polymer mixed with slurry.

Providing and fitting chromium plated brass casement window fastener with necessary screws etc. complete

Providing and fixing CP brass handle with necessary screws etc. complete

Providing and fixing CP brass casement stays ( straight peg type) with necessary screws etc. complete

300mm weighting is not ≤ (330gm)

Providing and fixing aluminum sliding door bolts ISI marked anodized (anodic coating and grade ac as per IS: 1860) transparent or dyed to required color or shade with nuts and bolts etc. complete

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating and grade ac as per IS: 1860) transparent or dyed to required color or shade with necessary screws etc. complete

Providing and fixing aluminum door hanging floor door stopper, ISI marked, anodized (anodic coating of grade Al 10 as per IS: 1060) transparent & dyed to required shade and color with necessary screws etc. complete.

Single rubber stopper

Double rubber stopper

Providing and fixing 2nd class pre- laminated teak wood lipping") molded beading or Taj beading of size 10x5mm wood with wooden adhesive of approved quality and screws , nails on edges of pre laminated particle beard as per directions of the Engineer in charge.

Providing and fixing aluminum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections of appropriate Z sections and other sections of approved make conforming to IS;733 and IS;1285, fixed with dash fastener of required dia and size including necessary filling up of gaps at junctions i.e. at top, bottom, and sides with required EPDM rubber/ neoprene gasket felt etc. Aluminum sections shall b smooth, rust free, straight, mitered and jointed mechanically , wherever required including cleat angle, aluminum snap beading for glazing/ paneling, CP brass/ stainless steel screws. all complete as per architectural drawing and directions of engineer-in-charge(glazing, paneling and dash fasteners to be paid for separately for fixed portions Partitions in ICU section/ wards G.F

Providing and fixing 12mm thick pre- laminated particle board flat pressed three layer in graded wood particle board (conforming to IS:12823 grade-I type II ) IN PANELLIN, FIXED IN Aluminum doors, windows, shutters and partition frames with CP brass/ stainless steel screws etc. complete as per architectural drawing and direction of engineer-in-charge Pre-laminated particle board with decorative laminati0ons on one side and balancing lamination on other side

Providing and fixing CP brass curtain rods having wall thickness of 1.25mm with two CP brass bracelets fixed with CP brass screws and PVC sleeves etc. wherever necessary complete.

Providing 40x5mm flat iron hold fast 40cm long including fixing to frames with 10mm dia bolts, nuts and wooden plugs and embedding in cement concrete block 30X10X15 cm 1:3:6 (cement :coarse sand :graded stone aggregate 20mm nom size)

( PLUMBING AND SANITARY INSTALLATIONS)

China Ware

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.I. brackets,40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required

W.C. pan with ISI marked white solid plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm dia CP Brass single hole basin mixer of approved quality and make, including painting of fittings and brackets, cutting and making good the walls wherever required:

(a) White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer

Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing and fixing white vitreous china laboratory sink with C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required :

Size 600x450x200 mm

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:

White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern,with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass,including painting of fittings and cutting and making good the walls and floors wherever required :

Range of four half stall urinals with 10 litre P.V.C. automatic flushing cistern

C.P Fitting and Accessories

Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing :

Rectangular shape 1500x450 mm

Providing and fixing toilet paper holder with Flap made out of C.P Brass

C.P Brass

Providing and fixing C.P Brass Soap Dish.

Providing and fixing health faucet with hose pipe for european water closet complete in all respect of approved quality

Providing and fixing CP brass towel rail complete with CP brackets fixed to wooden cleats with CP brass screws

Providing and fixing C.P. brass bib cock of approved quality conforming to IS:8931 :

15 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931

15 mm nominal bore

Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge.

Providing and fixing CP Brass Single lever telephonic wall mixer of quality & make as approved by Engineer in charge.

15 mm nominal dia

SOIL, WASTE AND VENT PIPES

Providing and fixing soil, waste and vent pipes IS 13592 & fittings (IS: 14735 ) suitable to rubber ring joints , which includes bends, rubber ring, jointing, junctions, clean out plug , cowls, offsets, collar, M.S holder-bat clamps, access pieces, trap of self cleansing design .etc. complete including jointing.

110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B

75 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B

160 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B

Providing and Fixing of Floor Traps 110 mm with double chrome plated Cover one Grated and one closed and all other fittings required.

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge. (external)

Concealed work, including cutting chases and making good the walls etc.

1620 (20 mm OD) pipe

2025 (25 mm OD) pipe

2532 (32 mm OD) pipe

Providing and fixing Polyethelene-Aluminium-Polyethelene (PE-ALPE) Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80 0C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes testing of joints complete as per direction of the Engineer in charge.

Internal work (Exposed on wall)

2025 (25 mm OD) pipe

2532 (32 mm OD) pipe

3240 (40 mm OD) pipe

4050 (50 mm OD) pipe

Providing and fixing unplasticised PVC connection pipe with brass unions:

45 cm length 15 mm nominal bore

Cutting holes upto 30x30 cm in walls including making good the same with common burnt clay F.P.S.(non modular) bricks

U-PVC External Sewage

Constructing masonary chamber 60x60x75 cm inside, in brick work in cement mortar 1:4 (1 cement: 4 coarse sand) with C.I. surface box 100x100x75 mm (inside) with hinged cover fixed in cement concrete slab 1:2:4 mix (1 cement: 2 coarse sand:4 graded stone aggregate 20 mm nominal size) necessary excavation foundation concrete 1:5:10 (1 cenment: 5 fine sand: 10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 coarse sand) 12 mm thick finished with a floating coat of neat cement complete as per standard design With F.P Bricks.

Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 m :

Pipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia

Filling available excavated earth (excluding rock) in trenches, plinth,sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.

Providing and filling sand of grading zone V or coarser grade all-round the Composite Pipes in external work & lay dry brick over sand layer to protect the pipe.

110 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B

160 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B

200 mm dia. PVC SWR socketed pipe with rubber ring joints as per IS:13592 Type-B

Supply, Installation of PVC Gully Trap of Size 110 mm

Providing & fixing full way lever operated forged brass ball valve of brass body with forged brass hard chrome plated steel ball tested to a pressure not less than 16 Kg / sqcm with threaded / flanged joints complete with nuts, bolts, gaskets, washers etc.

50 mm Diameter

40 mm Diameter

32 mm Diameter

25 mm Diameter

Providing and fixing on wall 50 LTRS Electric water Geyser with ABS Body of standard make

Providing and placing polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. Complete job

M/S MOHD AMIN MALLA