SITC of Air Conditioner Machines in place of more than 10 years old Split Machine at Emergency MO Room and MCW Doctor Room, ART Clinic, ART Centre and EYE OPD of North Bengal Medical Collage and Hospital, Dist-Darjeeling. SITC of Refrigeration pipe

Amount

SITC of hard /soft copper refrigeration pipe line with 9 mm nitral rubber insulation and Al foil tape complt. With fittings , elbow, bends, supporting arrangents on walls (Make- Ryoku/Rajco/Nippon)

a) Liquid Line (1/4 ' OD with 0.6 mm thick)

b) Suction line (5/8' OD with 0.7 mm thick )

Supply & Fixing 240 V, 25 A, 3 pin Modular type plug socket (Brand approved by EIC), without plug top and switch with 2 Module GI Modular type switch board with top cover plate flushed in wall and making necy. connections with PVC Cu wire and earth continuity wire etc

Supply & Fixing of 240V 50 Hz 48" sweep (1200 mm) AC ceiling fan complete with down rod , Canopy, fork etc. with out regulator as per direction of EIC. (Make-Orient PSPO /CG/USHA striker 1200 mm safety wire & S3 Capacitor)incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire as per G.S.

Supplying & Fixing iron beam fan clamp of two piece type, as per approved specification, fabricated from 40 mm x 9 mm MS sheet flat suitable for beam having flange upto 150 mm wide – (As per Drawing no. 476 of PWD Specification Book – May 1991)

Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Wiring in 1.1 KV grade single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc.

Supply & Laying of 3 core 2.5 sq.mm Copper cable for Connecting of Indoor & outdoor unit as per direction of E.I.C (Make - KEI/Polyvcab /Havells)

SAATHI BUILDER

TAPAS LIGHTS