WBPWD/EE-I/CKHED/eNIT27/25-26

Amount

Distribution wiring in 2 x 22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit 'FR' (Precision make), with 1x22/0.3 (1.5 sqmm) single core stranded 'FR' PVC insulated & unsheathed copper wire for ECC, to light/fan /call bell points with Piano Key type switch fixed on MS CRC sheet metal (16 SWG) switch board cum JB on wall complete with 2 no. suitable size “Ph & N” copper bar incl. bakelite/Perspex (wall matching color) top cover 3 mm thick and incl. 175mmx100mmx65mm inspection box, making earthing attachment, painting the MS box and mending good the damages to original finish. i)Average run 10 mtr.

ii). Average run 8 mtr

iii). On Board

Supplying & Fixing CRC sheet metal (16 SWG) JB-cum?Switch Board of the following sizes complete with three no. suitable size Copper bar with holes (for Ph, N & E) fixed on bakelite/Hard Rubber insulator over the MS welded chairs incl. bakelite/Perspex/coloured Perspex (wall matching colour) top cover 3 mm thick flushed in wall for housing the board after cutting the brick wall or mount it on the wall surface on flat iron frame incl. making earthing attachment, painting and mending good damages to building works

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

240 mm x 200 mm x 65 mm

Supply & Fixing bakelite / perspex top cover on existing switch board by Brass screws after making housing for switch by cutting bakelite / perspex cover and making necessary connections as required

150 mm x 100 mm x 65 mm

175 mm x 100 mm x 65 mm

240 mm x 200 mm x 65 mm

Supply & Fixing 240 V 6 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V 16/20 A Piano key type switch (Brand approved by EIC) on existing sheet metal switch board having bakelite/perspex top cover by screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 6A plug socket (Brand approved by EIC), without switch & plug top, on existing sheet metal switch board with bakelite/perspex top cover by screws after making housing for plug by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc

Supply & Fixing 240 V, 20 A plug socket (Brand approved by EIC), without plug top and switch, on existing sheet metal switch board with bakelite/ perspex top cover by screws after making housing for combined plug switch by cutting bakelite/perspex top cover and making necy. connections with PVC wire and earth continuity wire etc.

Supply & Fixing Socket type fan regulator (Step type)(Anchor) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/ perspex top cover incl. making neccessary. connections etc.

Supply & Fixing 240 V, 3 nos. 6A, & 1 no. 20A plug socket with separate 3 nos. 6 A & 1 no. 20A Piano key type switch, indicator & 20A switch type SP MCB (Brand approved by EIC) on sheet metal switch board fixing on surface of wall incl. S &F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex coverand making neccy. connections as required

Supply & Fixing 240 V, 4 nos. 6A, plug socket with separate 4 nos. 6 A Piano key type switch, indicator & 16A switch type SP MCB (Brand approved by EIC) on sheet metal switch board embedded in wall or mount it on the wall surface on flat iron frame incl. S & F 240x200x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mm thick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required

Supply & Fixing 240 V, 2 nos. 6A, plug socket with separate 2 nos. 6 A Piano key type switch, (Brand approved by EIC) on sheet metal switch board fixing on surface of wall incl. S & F 175x100x65mm MS (16SWG) switch board and bakelite/perspex top cover of 3mmthick by Brass screws after making housing for switch by cutting bakelite/perspex cover and making necessary connections as required(NS)

Supply & Fixing 240 V, 25 A, Modular type starter (Brand approved by EIC) with 25A Modular switch type DP MCB (C?Curve) and 4 Module GI Modular type switch board with 4 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.

Supply and fixing 2-way MCB SS enclosure with IP-20/30 protection, [Legrand ] powder coated & S&F of (32)A,2pole MCB Isolator in DIN channel, concealed in wall after cutting the wall or mount it on the wall surface on flat iron frame & mending good the damages to the original finish incl. inter-connection with suitable size of copper wire, necy. painting,& provision for earthing attachment etc. as required.

Supplying & fixing of 230V, Timer DB Fixed on Wall by flat iron/Angle frame or as per direction of EIC . The Box should comprising following accessories......... A).Double-door SPN-MCB Distribution Board with IP-42/43 protection 2+8 way[ make Legrand/Seimens/L&T] B). 1No. 250V ,50Hz,16 Amp Digital daily & weekly time switches(Make L&T-67DDT0/Eqv. legrand) C)1No 250V,40A DP-Contractor(Make-L&T/legrand /ABB/). D)1No. 250V,6-32 A DP-MCB(Make-L&T/Eqv. legrand). E)1Nos LED Indication Lamp for running condition. F)The complete arrangement must be wiring by suitable size of PVC insulated Cu wire with suitable socket/lugs as per requirement & direction by EIC .

Distribution wiring in 1.1 KV single core stranded 'FR' PVC insulated & unsheathed copper wire (RR/Havells/KEI) in 20mm/25/35mm size PVC rigid conduit 'FR' (Precision make) incl. necy. fittings as requiredi. i)4x126/0.4 (16 sqmm) + 2x80/0.4 (10 sqmm) as ECC

ii)2x 84/0.3 (6 sqmm) + 1 x 56/0.3 (4 sqmm) ECC

iii)2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC

iv). 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC

Finishing of the PVC insulated wire ends by socketing with pin/ ring type copper sockets and insulated tapes etc.,including supplying sockets, tapes. i)16sq mm.

ii)10sq mm.

iii)6sq mm.

iv)4sq mm.

v)2.5sqmm

vi)1.5sq mm.

Supply and delivery of commercial type indoor mounting retrofit rail for DOUBLE LED tube light frame complete with all accessories as required. [Make:(PHILIPS-TMC-501-P-2XT-LED-P3241)/CG/Wipro ]

Supply and delivery of commercial type indoor mounting retrofit rail for Single LED tube light frame complete with all accessories as required. [Make:(PHILIPS-TMC-501-P-1XT-LED-P3241)/CG/Wipro ]

supply & delivery of 240V, 20W,2100lm ,4Feet LED tube light..[Make:(PHILIPS-Essential)/CG/Wipro ]

Fixing only single/twin florescent light fitting complete with all accessories Directly on wall/ceiling with HW block and suitable size MS fastener, Ceiling plate, nipples etc. as required.

Fixing only LED tube light fitting(single/twin) suspended 25 cm bellow the ceiling with 2 No. 20 mm dia EI conduit (14 SWG) supports incl. S&F EI conduit, ball socket/socket type ceiling plate and connecting the length of PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5 sqmm) flexible copper wire of 1.10mt. length.

Extra for suspension exceeding 25 cm with S&F additional 2 no. 20 mm dia EI conduit (14 SWG) supports & necy. PVC insulated wire and painting etc. as required by 2x24/0.20 mm (1.5sqmm.) flexible copper wire of 1.10 mt. length.

Supply & delivery of (9''),rpm-1420,230volt,80 watt metal body exaust fan [ Make: EPC india pvt ltd- Tempest] complete with all accessories.

Supply & delivery of (12''),rpm-1420,230volt,80 watt metal body exaust fan [ Make: EPC india pvt ltd- Tempest] complete with all accessories.

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 23 cm (9")

Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI 23 cm Exhaust fan (9")

Supply & Fixing louver shutter on wall with necy. bolts & nuts (6 mm dia x 62 mm long) For GI 30 cm Exhaust fan (12").

Supply & delivery of 450mm,(18''),rpm-1420,230volt,85 Watt wall bracket Fan [ Make: EPC india pvt ltd- Tempest] , full metal body, heavy duty fan complete with all accessories..

Fixing the wall bracket fan into the wall by fastnuts,screws etc as per direction of EIC.

Supply & Delivery of 48",1200mm,,230volt single phase AC ceiling fan (Brown in colour) inch. All acessories (blades,canopy,fork, rubber bush etc.) & the capacitor of the fan should be P-2 type burst proof & must have safety wire/rope directly from fan hook to stator of the fan ceiling. [Make:crompton Riviera/Orient ]

Extra for supplying additional down rod ans 2x1.5 sqmm flexible copper wire for exceeding 30 cm incl. painting the rod with approved paint and making necessary connection as required

Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessary connection as required by 2x1.5 sqmm flexible copper wire.

Supply & fixing additional safety arrangement of ceiling fan by stranded GI strain wire of suitable gauge with one end fixed at RC clamp with special type of socket, nut-bolts, thimbles which throughly crimped with the strain wire and the wire passing through down rod (for upto 8 ft) and also other end connected with armature spindle by its existing jam nut hole with special arrangement (sample approved by EIC). The length of the strain wire up to 9ft also considering any type of work required i.e. enlarging the existing hole by file etc. to complete the job including installation as per direction of EIC (Static & Dynamic Load Test (in rotation of 1:20) .

Fixing only fan clamp for RC ceiling as per specification after cutting the ceiling & binding with reinforcement and mending good the damages.

Supply & Fixing MS fan clam of two piece type for RC ceiling as per approved specification, fabricated from 40 mm x 9 mm MS flat including making good damages to building roof with satisfactory finishing and painting – (As per Drawing no. 475 of PWD Specification Book – May 1991)

Supplying and fixingdouble -door SPNMC BDistribution Board with IP-42/ 43 protection,concealedin wall after cutting the wall or flat iron/angle iron frame on wall with nuts bolts etc &mending good the damages to original finishincl. Interconnection with suitable size of copper wire and neutral link & provision for earthing attachment 2+12 way Enclosure (607712) .(Make Legrand)

Supplying and fixing double door Horizontal TPNMCB Distribution boardwith IP-42/43protection, concealed inwall after cutting the wall or flat iron/angle iron frame on wall with nuts bolts etc &mending good the damages tooriginal finish incl. Inter connectionwith suitable size of copper wire and neutral link &provision for earthing attachmen. 8 way, Enclosure (607717) .(Make Legrand)

Rate should be quoted incl. of all taxes and cess.

Defect Liability period : 1 year

BHATTACHARYYA ENTERPRISE (BID ID -6799595)

GHANASHYAM ELECTRIC STORES (BID ID -6782401)

KANJILAL and SONS (BID ID -6810179)