Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.1 LAccepted-AOC 68 BANK COLONY SUNDER NAGAR PATHANKOT 145001 PB | PATHANKOT | PATHANKOT | PUNJAB | 145001 | L1 | Accepted-AOC Being Lowest | |
| 2 | L2₹23.5 L+₹2.0 L (9.21%)Rejected-Finance | L2 | Rejected-Finance Not Lowest | |
| 3 | L3₹23.5 L+₹2.0 L (9.47%)Rejected-Finance | L3 | Rejected-Finance Not Lowest | |
| 4 | L4₹25.0 L+₹3.5 L (16.5%)Rejected-Finance NH 44 BUILDING COLONY NO 01 SUJANPUR TEH DISTT PATHANKOT PUNJAB 145023 | PATHANKOT | PATHANKOT | PUNJAB | 145023 | L4 | Rejected-Finance Not Lowest | |
| 5 | L5₹25.7 L+₹4.2 L (19.7%)Rejected-Finance | L5 | Rejected-Finance Not Lowest |
Tender Value
Refer Docs
EMD Value
₹75,580
Closing Date
26 Nov 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (SOUTH) PATHANKOT
GE (SOUTH) PATHANKOT
SPL REP TO BLDG NO NP 76 AT BHADORIYA COMPLEX UNDER GE SOUTH PATHANKOT
2022_MES_560286_1
GES/PKT/T-46/2022-23
Open Tender
Construction Works
Item Rate
180 days
GE (SOUTH) PATHANKOT
Please refer Tender documents.
9 documents required · 9 mandatory
₹500
GE (SOUTH) PATHANKOT
₹75,580
Yes
23 Feb 2023
28 Oct 2022
28 Nov 2022
28 Oct 2022
26 Nov 2022
12 Nov 2022
Amount
Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc with and including taking out existing roof treatments, brushing neat cement slurry with 3.0 Kg of cement per sqm. complete.
M&L PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregate) as in padding over roof slab for providing proper slope 1:40 and approx thickness 75mm or less and finished the surfaces even and smooth wihtout unsing extra cement complete all as specified and directed.
M&L for 10mm thick rendering in Cement mortar 1:4 mixed with WPC 3% by weight of cement on fair faces of concrete roof surfaces , finished even and fair to receive treatment on roof, complete all as specified and directed.
Supply only water proofing compound, complete all as specified and directed.
Providing and laying of water proofing treatment of roof APP (Atactic Polyproplyllen) modified prefabricated five layer 3mm thick water proofing membrane, super thermply non woven polyester mat reinforcement of 160 gsm, weight of membrane @ 3.6 Kg/Sqm over a solvent based bitumen primer @ 0.3 Ltr Sqm by the same manufacturer conforming to IS:3384-1986 , The membrane shall be laid using bitmun torch.The end lap should be 100 mm and the side lap must be minimum 75 mm the membrane shall be first laid up to the parapet wall junction and then shall be overlapped with another membrane (flashing) with an overlap covering up to a distance of 300mm. In case parapet height is less than/ up to 500 mm, membrane shall be terminated at the top of parapet.All rain water pipe opening shall be suitably sealed with the APP membrane, complete all as specified and directed. (The rate includes for filling cracks in existing roof with cement putty using suitable bonding agent (shalcrate 42) before laying cement plaster)
M&L 40 mm thick brick tiles bedded in cement mortar (1:6), 15mm thick and joints grouted flush in cement mortar (1:3) mixed with 5% of cruded oil by weight of cement.
Taking down chowkhats of frames n.exc 1.50 sqm with shutters (without taking off shutters from the frames) all as spd.
All as per Srl Item No 7 above, but exceeding 1.5 Sqm and n.exc 4 Sqm(without taking off shutters from the frames) all as spd.
Taking down shutters of any description exc 1.00 sqm and not exc 2.00 Sqm each all as specified & directed.
S&F pressed steel frame made out of MS sheet 1.25mm thick of size 105x60mm for doors/ windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including filling of concrete 1:3:6 type C-1 back of chowkats all as specified.
All as per ser item No 10 above but size of frame 125 x 60mm complete all as specified & directed.
S&F 35mm thick HDF prelaminated (Wenga/ Teak coloured ) moulded shutter PUF(Poly urathane foam ) insuation with minimum density 40Kg/Cum filled in between two HDF sheets of thickness 3.2mm both & border covered with 10mm thick PVC sheet as per Drg No. CEPZ/TD-378/sheet 1/1 dated 27/12/2011 complete all as specified and directed.
S&F 35mm thick single piece factory made wire gauge door shutter of (steel & aluminium XPM) manufacturing by PVC sheets printed 5mm thick on both side on frame made out of MS tube 19 SWG size 19 x 19mm complete in all respect with lock rail & beautified by PVC beading all around fixed with PVC solvent cement complete as per Drg No.CEPZ/TD-378/Sheet 1/1 dated 27/12/2011 complete all as specified and directed.
S&F Solid PVC door frame of size 50mmx47mm made out of 5mm prelam PVC sheet used instead of Plain colour PVC sheet and edges will be painted to match with prelam sheet reinforced with MS Square tube, suppling & fixing in opening as per specification and drawing. Note : Door frame shall be water proof, termite proof, elegant and should have excellent screw holding strength to fix hinges and hold doors properly for long life)
S&F Factory made Solid PVC Moulded Door Shutter with wood free EPS, 28 to 30mm thick (stiles) with 5 mm thick moulded prelam PVC sheet on the front face and 5 mm prelam PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.
S&F for Steel windows with tubular frame factory made with double shutter (wire gauged shutter & glass glazed shutter, wire cloth and glass panes shall be measured and paid separately) of size 79mmx39mm,16 gauge rectangular tubular frame with side hung shutter with glazing bars 12x3mm flat iron incl projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills complete, including two coats of synthetic enamel paint over one coat of red oxide primer all as specified & pattern shown in drg No CEPZ/ID-245/01 and 246/02 sheet ½ & 2/2.
S&F steel ventilator with tubular frame factory made of size 79mmx39mm, 16 gauge rectangular tubular frame with side hung shutter ,bottom portion glazed and top portion gauzed shutter with glazing bars 12x3mm flat iron including projecting type hinges with steel handle and steel peg stay dovetailed or welded incl 2 Nos tower bolts 100mm long and 10mm square bar grills and frosted glass and wire cloth complete, including two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
S&F 150mm long aluminium, anodized barrel tower bolts of extruded section ISI marked
S&F 150mm extruded aluminium alloy handle fabricated anodized ISI marked .
S&F 100mm long butt hinges medium weight cold rolled ISI marked mild steel .
S&F for 300 mm long mild steel sliding door bolts, plate type, with stainless steel bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate and fixed
M&L sliding bolt 250mm thick aluminium with hasp & staple bolt type and fixing clips of sheets cast or extruded section and fixing bolts and sliding bolts or extruded section all as specified.
S&F for mild steel 300mm, ordinary rat tail rod pattern springs including roller and roller plate complete
S&F for Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length of cover plate 140 mm complete.
S&F for glavinized mild steel wire cloths 0.56mm nominal dia and average width of apreture 1.18mm & fixed with tint tacks or glavinized wire staples all as specified.
S&F sheet glass 3.00mm thick ordinary quality and glazing with oil putty and pins in square n.exc 0.50Sqm in each panes.
M&L for Preparing the old/new steel surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint
S&F factory made single extruded WPC (Wood Polymer Composite) solid door/window/Ceosetory windows & other frame/Chowkhat of size 45x70mm comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum , screw withdrawal strength of 2200N (Face) & 1100N (Edge), minimum compressive strength of 58 N/mm2, modules of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with properly of being termite/borer proof, water/moisture proof and fire retardant 152 Section 8 and fixed in position with MS hold fast/lugs/SS dash fasteners ofvrequired dia and length complete as per direction of Engineer-in-charge.
S&F prelaminated 18mm thick lead free factory made 100% solid WPC (wood polymer composite) sheet having high natural fiber content 25 to 30% wood colour sheets with density not less than 500 Kg/Cum and the weight of sheet of 1 sqm should be 11 Kg (+-5%) manufactured by ISO 9001-2015 certified company the sheet should be 100% water proof termite proof, fire retardent, manufactured by single layer extrusion process with excellent screw holding capacity and shore D hardness complete including all fittings like handle, hinges, hydraulic stopper, beading etc as per direction of Engineer-in-charge.
Continous (Piano) type hinges mild steel bright finish or lectro galvanised with wide of flaps 30mm complete all as specified and directed.
S&F for hasp and staple aluminium anodised 100 mm long with mild steel hinge pin including bolt to hinge plate and fixed with screw complete,
Taking down old eaves gutters and rainwater pipes (any size or pattern) , including all fitting ,head ,shoes ,bend, swan-nacks etc., including cleaning or refixing or removal to store .
S&F PVC (SWR) pipes single sockets in any length with rubber ring joints fixed to walls as a rain water pipes, 110mm bore with cement joints complete all as specified and directed.
S&F PVC (SWR) shoes of 110mm bores complete all as specified and directed.
S&F PVC (SWR) bends of 110mm bores complete all as specified and directed.
Vitreous China squatting pan of orissa pattern, size 580x440mm white with CI ‘P’ or ‘S’ trap, front or back inlet and foot rests, any pattern (excluding supply but including fixing of flushing cistern and flush pipe) including provision of cement concrete bedding, in repair complete all as specified and as directed.
S&F in repair 10 litres PVC low level flushing cistern(white) syphonic action type with inlet ball valve float and push type handle including bracket, PVC 32mm dia flush pipe with coupling fixed.
S&F in repair for vitreous china WHB, size 550 mm X 400 mm (flat back or angle back type) including cutting for and pinning in ends of brackets or erecting stand etc but excluding fixing of supply and waste pipe complete.
S&F in repair Centre hole basin mixture valve, cast copper alloy fancy type, chromium plated, for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.
S&F in repair Rotational moulded polyethlene water storage tanks of capacity 500 litres, (cylindrical vertical with closed top) hoisted and fixed in position including necessary G I fittings, inlet/outlet washout, overflow pieces long nipples, PVC Ball valves 15/20mm bore high pressure of PTMT incl aluminium rod and plastic ball checknuts & washer etc complete all as specified & directed.
Taking up or down GI pipe 20 mm bore and connection, including cleaning for refixing or removal unserviceable pipe from the site
Taking up or down GI pipe 15 mm bore and connection, including cleaning for refixing or removal unserviceable pipe from the site
S&F in 20mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls
All as per item No 43 above but except tubing
S&F in 15mm bore tubes medium grade galvanized ISI marked with all fittings short pieces and fixed complete to walls
All as per item No 45 above but except tubing
Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in stone/ concrete block walls complete.
S&F in repair Bib taps fancy type chromium plated with long shank with crutch or butter fly handle high pressure screwed down screwed for iron pipes of bore 15mm complete.
S&F in repair 15mm bore stop cock (concealed type), chromium plated with long shank and cup screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe ISI marked.
S&F in repairs swivel shower of PTMT any colour for fixing with 15 mm pipe incl shower arm 15 mm size, 195 mm long with bend of 45 degree with flenge of PTMT
S&F in repair 15mm bore stop valve/angle valve chromiun plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for 15mm bore of pipe ISI marked.
S&F, PVC connection 15mm bore size with two nuts and washers of length 450mm.
S&F Chromium Plated wall mixture valve cast copper alloy fancy type for mixing hot and cold water screwed down high pressure with capstan head screwed both ends for iron pipe 15mm bore dia complete all as specified and directed.
S&F in repair chromium plated tublar towel rail 20mm dia D type 60cm long between flanges.
S&F in repairs shelf of PTMT fixed with and incl chromium plated brass screws and wooden/plastic cleats min weight 300 gms
CP Towel Ring including Chromium plated brass screws and wooden/plastic cleats all as specified & directed.
CP Soap dish, any type, fixed to plugs with chromium plated brass screws
S&F stainless kitchen plate rack of size 600 x 750mm, of approved make, fixed with mild steel screws complete all as specified & directed.
S&F in replacement 75mm bore PVC floor trap with grating including jointing to waste pipe in cement concrete type B-1, 1:2:4, complete all as specified and directed.
S&F of 75mm PVC (SWR) drain pipes 75 mm bore single socketed in any length with rubber ring joint fixed to walls complete all as specified and as directed.
S&F for 75mm bore pipes,PVC (SWR) bends any radius fitting fo PVC (SWR) pipes as in repair complete all as specified and directed.
S&F of 75mm bore PVC (SWR) branch pieces (single Y) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F of 110mm bore PVC (SWR) branch pieces (single Y) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F of 75mm bore PVC (SWR) junction (single T) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F of 110mm bore PVC (SWR) junction (single T) equal or unequal jointing with solvent cement complete all as specified and directed.
S&F sinks with drainage boards made of stainless steel 1mm thick kitchen or labortory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified & directed.
Demoliton of cement conc of any description in any position not specifically provided for, all as specified.
M&L for PCC 1:5:10, type E-2 using 40mm graded crushed stone aggregates aggregate, as in sunken floors and mass concrete all as specified & directed.
M&L for Rendering 15 mm thick in cement mortar 1:2 and mixing with WPC 3% by weight of cement complete. (WPC paid separately)
S&F for Applying evenly a coat of blown type bitumen at the rate of 1.50 kg per square metre and blinding with clean dry sand @ 0.05 cum. per sqm
S&F for Polythene film, 50 micron thick, laid on a coat of bitumen primer, @ 0.30 to 0.50 kg per sqm
Demolition of cement concrete(reinforcement) of any description and in any position not otherwise sepecifically provided for all as specified.
M&L for providing pre cast cover slab for drain cover, Manholes cover etc using type B-1, 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 complete.
M&L mild steel TMT bars 10mm dia and over cut to length, bent to shape, required including cranking, bending, spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified .
Granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and marble dust (1:2) with admixure of pigment to match the shade of granite stone in CM 1:4 including cutting and polishing including 15mm thick screed bed or bedding layer of CM 1:4 of mortar for laying on platform or concrete surface etc complete all as specified & directed.
Granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement and marble dust (1:2) with admixure of pigment to match the shade of granite stone including cutting and polishing including 15mm thick plastering of CM 1:4 of mortar for skirting or vertical surfaces etc complete all as specified & directed.
Kota stone slab flooring 18 to 20mm thick laid and jointed with grey cement slurry and no pigment to match the shade of the slab including rubbing & mirror polishing over and including 20mm thick cement screed in cement mortar 1:4, and demolition of existing floor topping all as specified & directed.
All as per item No 78 above but on vertical surfaces on 10 mm thick CM 1:4.
Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations
M&L rendering 10mm thick on concrete in CM 1:3 in facia or edging of chajjas,ceiling and roof projection etc incl taking out pealed off plaster/concrete and making good to cracked RCC surface in true line /shape by providing RCC 1:2:4 type B1 using 20 mm graded crushed stone aggregate including all necessary form work to thickness at required at GF and FF finish even and smooth without using extra cement complete all as specified and as directed by eng-in charge.NOTE- the rate will be inclusive of scafolding for single or double storey including making hole in brick work and making good in cement mortar.
75 mm thick cement concrete (1:3:6) type C-1, using 20mm graded crushed stone aggregates as in plinth protection in panels, joints filled with bitumen mastic including finishing the surfaces even and fair including demolition of existing concrete in plinth protection, path etc complete all as specified & directed.
Demolition of brick work stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc .
M&L for brick work with sub class ‘B’ bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6 .
All as per item 84 above, but except bricks.
M& L for Cement concrete in surface channels and drains using type B-1 of 1:2:4 (20 mm graded aggregate )
Dismantling floor hearth or wall tiling incl cement mortar bedding (But not backing) removing serviceval tiles to store and rubbish off the premises, complete all as specified & directed.
Demolition Concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level), complete all as specified & directed.
M&L for Cement concrete in sub base for receiving floor tiles and mass concrete using Type B1,1:2:4 (12.5 mm graded aggregate), complete all as specified & directed.
M&L providing glazed ceramic coloured wall tiles of ordinary quality size 450x300mmx7mm thick, set jointed in colour cement to match over 10mm thick rendering in CM 1:4, complete all as specified & directed.
M&L non skid ceramic colour tiles 7 to 8 mm thick ( sq/ rect) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles including 15mm thick screed bed in cement mortar 1:6, complete all as specified & directed.
M&L vitrified ceramic tiles 08 mm thick ( sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
M&L vitrified ceramic tiles 08 mm thick (sq/ rect) polished, area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in dado/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles laid over and including 15mm thick screed bed in cement mortar 1:6 complete all as specified and directed.
Taking down cement plaster on brick/stone wall etc including raking out joints hacking for key scrubbing down with water etc .
M&L for Rendering 15mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified.
M&L for Rendering 15mm thick in cement mortar 1:6 on fair faces of brick work or concrete surfaces finishing the surfaces even and smooth without using extra cement all as specified.
M&L for two coats of cement base paint to newly plastered surfaces including preparation of surfaces all as specified and directed
M&L for Preparing old plastered surfaces of wall and applying one coat of cement base paint on walls, complete all as specified & directed.
M&L for preparation of old plastered surfaces of wall, roof projection/window chajjas and similar surfaces and applying one coat weather proof exterior emulsion paint make: Apex ultima (Manufactrured by Asian paints) complete all as per manufactured and directed Note : - Tint/Shade shall be approved by Engr-in-Charge.
M&L for preparation of newly plastered surfaces of wall, roof projection/window chajjas and similar surfaces and applying two coat weather proof exterior emulsion paint make: Apex ultima (Manufactrured by Asian paints) complete all as per manufactured and directed . Note : - Tint/Shade shall be approved by Engr-in-Charge.
M&L for two coats of white wash on newly plastered surface, as in ceiling including preparation of surfaces all as specified & directed.
M&L for two coats of white wash on old plastered surface, as in ceiling including preparation of surfaces all as specified & directed.
Complete removal of existing treatment from internal/ external surfaces of walls by brushing with wire brushing and washing, rubbing down and stopping of surfaces complete.
M&L for preparation of surfaces by leveling/edging of the disturbed planes/edges of old /new plastered surfaces of wall by using wall care putty of 2 mm thick on vertical surfaces to true vertical and horizontal lines of bricks/ concrete walls finish to even and smooth with two layers of screylie wall cure putty complete.
M&L for preparation of existing finished by wall care putty surfaces of wall and applying one coat of asian primer over two coat of oil bound distemper on old walls surfaces complete all as specified and directed
S&F in repair pvc curtain rod 25mm dia pre-painted synthetic enamel paint of cherry colour finishes fixed with screws
S&F in repair PVC bracket prepainted cherry colour with screw, hole suitable for 25mm dia PVC rod fixed with screws and gutties in wall .
All as per Srl Item No. 107 above, but end caps with wall ornament (Cherry/ Golden) and fixed to curtain rod with screws of design/shape all as specified and directed.
M&L for PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in coping PCC, block for hold fast including all necessary from work all as specified.
Demolition of cement concrete (unreinforced) in ground floor and paving n.exc 15 cm thicknss (below or above ground level) complete.
M&L for providing 75 mm thick, PCC 1:3:6 type C2, using 40mm graded stone aggregate as in sub floors complete all as specified and directed.
M&L for Sand filling under floors or in foundations including watering and consolidation including Spreading and levelling in layers n exc. 25 cm thick
M&L for machine pressed precast interlocking paver block with grey cement and no pigment, factory made, any shape and size as directed (any colour as directed by Engineer in charge), confirming to IS-15658-2006 of 60 mm thickness, made out of M-35 grade of concrete all as specified and directed.
Taking down old damaged SGSW/UPVC/RCC pipes from existing lines including necessary excavation as per requirement of old fitted in trenches & S&F 150 mm dia RCC NP3 pipe laid and jointed complete including providing 150 mm thick cement concrete (1:4:8) type D-2 using 40mm grade stone agg as in bed for pipes incl packing under and huaunching against the sides of pipes after they are laid tested complete all as specified and directed .
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
M&L steel work in tublar trussed incl special shaped washers etc complete using ERW or induction butt welded tubes conferming to IS 1161-1979 gde St -240 incl purlines complete all as specified and directed.
steel work in plates (plain or chequered) channels,square cut or notched (ordinary and counter sunk) Forming holes with riveted,bolted,or welded attachments complete all as spd and directed.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings,M&L Prepainted galvalume aluminum zinc coated GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws and overlap with sufficient laps complete all as specified and directed.
Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings,M&L pre painted galvalume aluminum zinc coated GI based plain steel sheeting 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to walls, fixed with self taping screws complete all as specified and directed.
Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors, complete all as specified and directed.
Providing and injecting chemical emulsion for Post Constructional ATT along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc
Taking down carefully copper/ aluminium point wiring (light/Fan socket or power) with complete fittings such as switch, sockets Ceiling rose pendent holders regulators etc. Removing old/UNSV material from site and making good the old disturbed surface.
M&L for point wiring with PVC insulated fire retardant stranded copper conductor cable of 1.5 sqmm in PVC concealed conduit heavy duty and pressed steel terminal boxes (for mounting switches /sockets/ regulators/ceiling roses etc ) made of not less than 16 gauge MS sheet and 6cm depth covered with 3mm thick laminated bakelite sheet fitted with brass screw and washers and drawing 1.5 sqmm PVC insulated fire retardant FRLS stranded copper conductor cable as earth continuity wire in green colour connected to common earth and each terminal box/fitting all as specified and directed. (Phase Neutral and earth wire shall be provided in standard colour code R,Y,B for phase, Black for neutral green for earth wire). Note In ceiling Portion surface conduit wiring shall be carried out.
One light point or one fan point or bell point controlled by one switch SP one way 230 Volts.
One light point controlled by Two-2 way switches with cable 1.5 Sqmm size,
One 3 pin socket out let 5/6 Amps on same board.
One socket out let 5/6 Amps on Independent board.
All as per srl item No 126 above but for 15/16 Amps socket out let independent with 4.0 sqmm copper conductor.
M&L for switch Piano flush type single pole one way 5/6 Amp
M&L for switch,socket combination 2 in 1 , 3 pin, 5 and 15 Amp flush type all as specified and directed.
M&L for switch Piano flush type single pole Two way 5/6 Amps
M&L for switch,socket combination 3 pin, 5 Amp flush type all as specified and directed.
M&L for bell push flush type 5/6 amp all as specified.
S&F for Buzzer Ding Dong, AC 230 volt single pole
M&L for socket outlet 2 in 1, 3 pin, 5 Amp flush type all as specified and directed.
S&F fan regulator electronic type with hum free snubber circuit with 4/5 steps 240 volts complete all as directed
M&L for ceiling rose 2-3 terminal size 65x20mm all as specified and directed.
S&F lamp holder Angle type insulated body with back plate for batten fitting, fixing with proper round block.
S&F in replacement sheet metal enclosure with DB's (grouted in walls) double door type for MCB's 08 ways with 200 Amps 240 volts rated bus bar all as specified.
S&F in replacement existing unsv distribution board iron clad, double door with IP-43 1K-09 protection suitable for MCCB as incommer and MCB as outgoing 415 Volts 3 phase 50 C/s 4 way, complete with appropriate size copper bus bar and neutral link complete with one MCCB 3 pole 415 Volts 100 Amps rating with rupturing cap 16 KA of the same make as of distribution board & including cutting chases to wall for fixing DB and making good the disturbed wall surface all as required at site or directed.
S&F for amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of following poles and current carrying capacity in the MCB DB complete with connection testing and commissioning and all as specified and directed
M&L 6 to 32 Amps MCB SP ( ISI Marked) 50 C/S 10 KA 'C' sereis complete all as specified.
S&F MCB 32 Amp SPN 50 C/S 10 KA 'C' sereis complete all as specified all as directed
S&F in replacement inverter type LED fitting 1x20W LED including LED tube 4 feet long having bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.
S&F in replacement existing UNSV decorative ultra slim square profile type fitting 4 feet long with LED tube light fitting 18 watt complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.
S&F in replacement bldg security light fittings with LED security light fittings 35 watt, IP 65 having pressure die cast aluminium alloy housing, prismatic polycarbonate cover complete including making connection with 3 core copper flexible cable of suitable size including galvanised iron pipe bracket 0.90 mtr long of 25 mm dia and fixing with bldg for fixing of street light fitting all as directed.
S&F in replacement existing unsv integrated LED bulk head light fitting 1X10 watts IP-65 protection connecting electricaly to ceiling rose using cord flexible 3 core PVC insulated over all sheathed with flexible copper conductor of size 0.75 sqmm all as required.
S&F in replacement existing unsv decorative ultra slim square profilesleek LED mirror light fitting 2 feet long 1x10 W including LED tube 2 feet long of same make having ballast, bipin holder, connector block etc complete all accessories prewired and connecting electrically to ceiling rose using PVC insulated and overall sheathed flexible copper conductor cable of size 0.75 sqmm 3 core all as required at site or directed.
S&F inverter type LED Lamp 10 watt 230 volts complete all as specififed and directed.
S&F sheet metal enclouser single pole and neutral with a 2 pin and earth plug and socket 20 A 240V complete with one single pole MCB of capacity 20 A complete all as specified and directed.
Taking down fan, sealing cable end, dismantling blades and removing fan & blades and keeping in safte custody for refitting/ depositing to MES store
M&L for hanging serviceable fan retirved under item No 151 above and connecting up including provision of cable from ceiling rose or connector to fan comlete all as specified and directed.
S&F in replacement of ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. with brushless direct current motor (BLDC) without remote complete all as specified and as directed.
Supply and fix ventilation fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250mm complete all as specified and as directed.
S&F exhaust fan made of sturdy Engineering steel body with complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 300mm complete all as specified and as directed.
S&F electric water heater, storage type steel body with copper inner tank and heating element upto 2 KW capacity 25 litre, BEE 5 Star rated complete with all accessories such as safety valve, thermostate, NRV, connection piece etc.complete all as specified and as directed.
M&L for Sub main wiring in PVC concealed conduit with 2 Nos single core PVC insulated copper conductor cable FRLS size 4 sqmm multistrand in concealed conduit with 4 sqmm PVC insulated FRLS as earth continuity wire using suitable size of copper thimble including provn of PVC coduit heavy duty ISI marked of adequate size.
M&L for Sub main wiring in PVC concealed conduit with 2 Nos single core PVC insulated copper conductor cable FRLS size 6 sqmm multistrand in concealed conduit with 6 sqmm PVC insulated FRLS as earth continuity wire using suitable size of copper thimble including provn of PVC coduit heavy duty ISI marked of adequate size.
Earthing complete with galvanised steel earth plate electrode 60×60cm.× 6mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less'than 1.5 metres below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical, plate No. 5 connected to earthing test point all as specified or indicated including testing on completion.
Supply and lay cable XLPE insulated armoured heavy duty electric cable with aluminium counductor, 1100 volts grade of crosssectional area 25 Sq mm 4 core.
Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1,5 mtrs in depth for laying of cables including getting out in any kind of soil complete all as specified and directed. (cable shall be laid 60 cm below ground level )
Returning filling in including spreading, leveling ,and well ramming, in layers not exceeding 25 cm each layer of any kind of soil.
Removing surplus excavated material from site not exceeding 50 mtrs from starting point and depositing where directed at level not exceeding 1.5 mtr above the starting point.
Sand cushioning for cables 8 cm below the cable and 15cm above the cable all as specified and directed .
M&L for old size brick well burnt, laid flat ,for cable protection complete all as specified and directed.
M&L for replacement of GI tubing light grade 40 mm bore for passing through cables under the floor ,along the wall or along the pole, complete all as specified and directed.
Note: In case the tenderer quotes different rates for similar item then lowest rate shall only be applicable for payment and contractor shall not have any claim on this account.
M/S Ajay Kumar Mahajan
Abrol construction co
HARI OM ENTERPRISES
jagdambe traders
SAMTA CONSTRUCTION CO
VIKRAM SINGH MANHAS
V K Sharma and Sons
Alishan Builders
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .