REPAIR/MAINT INCLUDING PAINTING TO STEEL FURNITURE IN DOMESTIC AREA AND TECH AREA AT AFS HASIMARA

Amount

TP FURNITURE REPAIR TO CHAIR REVOLVING TRADE PATTERN (TP) M & L for Re-upholstery of seat and back with new tapestry cloth of approved quality and colour as required including dismantling of old unserviceable one, all as per drawing, complete all as specified and directed.

M & L for 75mm thick new seat cusion and 50mm thick new back cusion of approved quality of foam 32 density duly covered with new tepestry cloth of approved quality and colour as required including dismantling of old unserviceable one, all as per drawing, complete all as specified and directed.

M & L for replacement of hydraulic system of suitable size and design as per original pattern, as required, complete all as specified and directed.

M & L for replacement of arms of chair revolving steel with arms, best quality, complete all as specified and directed.

M & L for repair to castor wheel to chair revolving, as per original pattern, as required, complete all as specified and directed.

M & L for replacement of wheel base fit to five Nos. of castor wheels to chair revolving, approved colour, complete all as specified and directed.

REPAIR TO CHAIR WRITING, CHAIR VISITOR CUSHION SEAT AND BACK (FD/E6/MAP/12, TP) M & L for Re-upholstery of seat and back of visitor chair with new tapestry cloth of approved quality and colour as required including dismantling of old unserviceable, all as per drawing, complete all as specified and directed.

M & L for replacement of 75mm thick new seat cushion and 50mm thick new back cushion of approved quality of foam 32 density duly covered with new tapestry cloth not less than Rs. 350.00 per meter of approved quality and colour as required including dismantling of old unserviceable, all as per drawing, complete all as specified and directed.

M & L for replacement of arms of chair writing/chair visitor steel with arms of best quality, complete all as specified and directed.

S&F new MS cleat for chair writing as per existing size, welded with frame, , all as per drawing, including removing old broken cleat, complete all as specified and directed.

REPAIR TO TABLE DINING OR'S (FD-165M) M & L for replacement of top of table dining with 18/19mm thick one side teak face pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screwed all as per drawing, complete all as specified and directed.

M & L for replacement of damaged legs with 25mm MS square tube of wall thickness 1.6mm by welding complete and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer all as shown on drawing and taking out old leg, complete all as specified and directed.

M & L for replacement of centre stiffener and long rail with 25mm MS square tube of wall thickness 1.60mm welded to frame complete and applying two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer all as shown on drawing including taking out old stiffener and long rail, complete all as specified and directed.

All as per item No. 3.20 here-in before but short stiffener and short rail, complete all as specified and directed.

REPAIR TO ALMIRAH LARGE STEEL (FD- 67M, FD-1033 & 1031) & ALMIRAH LARGE 1/2H & 1/2S Taking down old unserviceable locking device of almirah large steel and supply and fixing new lock of suitable size provided with duplicate keys as per sample, fixed with screws, all as per drawing, complete all as specified and directed.

M & L for repairing locking device of almirah steel large including lock bar, complete all as specified and directed.

M & L for repairing of door shutters of almirah steel large by denting and necessary adjustment, as required, complete all as specified and directed.

Taking down old unserviceable handle of almirah large steel and supply and fixing new chromium plated handle, fixed with screws, all as per drawing, complete all as specified and directed.

Taking down old unserviceable legs of almirah large steel and supply and fixing (by welding) new legs made out of 1mm thick mild steel black sheet and applying two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer including preparation of surfaces of new legs, all as per drawing, complete all as specified and directed.

Taking down old unserviceable shelves of almirah large steel and supply and fixing (by welding) new shelves made out of 1mm thick mild steel black sheet made to shape and applying two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer to new srfaces of shelves including preparation of surfaces, all as per drawing, complete all as specified and directed.

M & L for running welding in repair to broken/damaged sides (left/right), back and top of almirah steel large, complete all as specified and directed. (Note : Thickness of material to be welded n. exc. 2mm and length of each welding exc. 10mm but n. exc. 20mm).

REPAIR TO LOCKER STEEL (FD- 1029) Taking down old unserviceable legs of locker steel and supply and fixing (by welding) new legs made out of 1mm thick mild steel sheet and applying two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer to new legs including preparation of new surfaces, all as per drawing, complete all as specified and directed.

M & L for replacement for old damaged hasp and staple of locker steel with new hasp and staples of chromium plated safety type 100mm long, complete all as specified and directed.

Taking down old unserviceable handle of locker steel and supply and fixing new chromium plated steel handle, of 100mm size, ‘D’ type, complete all as specified and directed.

Taking down old unserviceable hinges of locker steel and supply and fixing new mild steel hinges, 75mm size of approved quality, complete all as specified and directed.

M & L for repairing of door shutters of locker steel by denting and necessary adjustment as required, complete all as specified and directed.

S&F 20mm dia stainless steel conduit pipe as a hanging rod all as per drawing iincluding taking out old unserviceable pipe, complete all as specified and directed.

S&F new shelves made out of 1mm thick plain sheet, all as per drawing iincluding taking out old unserviceable shelves, complete all as specified and directed.

M & L for running welding in repair to broken/damaged sides (left/right), back and top of locker bed sidw steel, complete all as specified and directed. (Note : Thickness of material to be welded n. exc. 2mm and length of each welding exc. 10mm but n. exc. 20mm).

REPAIR TO TABLE 3'X2' WITH/WITHOUT DRAWER STEEL (FD-1007 & 1008) M & L for replacement of top of table 3'x2' with/without drawer with 18/19mm thick one side teak face pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screwed all as per drawing including taking out old unserviceable top, complete all as specified and directed.

M & L for replacement of damaged legs with 25mm MS square tube of wall thickness 1.6mm and welding complete and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer, all as shown on drawing including taking out old unserviceable leg, complete all as specified and directed.

M & L for replacement of damaged stiffener/short rail 25mm MS square tube of wall thickness 1.6mm and welding complete and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer, all as shown on drawing including taking out old unserviceable stiffner/ short rail, complete all as specified and directed.

M & L for replacement of damaged long rail/centre stiffener with 25mm MS square tube of wall thickness 1.6mm and welding complete and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer all as per shown on drawing including laking out old long unserviceable rail/ centre stiffner, complete all as specified and directed.

M & L for replacement of damaged drawer of table made out of 1mm thick MS black sheet including making shape, welded with gas welding and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer all as shown on drawing including taking out old unserviceable drawer, complete all as specified and directed.

M&L for spot welding in repair n. exc. 2.50cm in length of broken steel frame of table, complete all as specified and directed.

REPAIR TO TABLE 3'X3' STEEL (FD-1009) M & L for replacement of top of table 3'x3' steel with 18/19mm thick one side teak face pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screwed all as per drawing including taking out old unserviceable top, complete all as specified and directed.

M & L for replacement of damaged legs with 25mm MS square tube of wall thickness 1.6mm and welding complete and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer, all as shown on drawing including taking out old unserviceable leg, complete all as specified and directed.

M & L for replacement of damaged front/back rail 25mm MS square tube of wall thickness 1.6mm and welding complete and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer, all as shown on drawing including taking out old unserviceable stiffner/ short rail, complete all as specified and directed.

M & L for replacement of damaged long side rail with 25mm MS square tube of wall thickness 1.6mm and welding complete and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer all as per shown on drawing including laking out old unserviceable long rail/ centre stiffner, complete all as specified and directed.

M&L for spot welding in repair n. exc. 2.50cm in length of broken steel frame of table, complete all as specified and directed.

REPAIR TO TABLE OFFICE CLERK STEEL (FD-84M, 84 & 1004) M & L for replacement of table top office clerk steel of size 1370mm X 760mm with 18/19mm thick one side teak face pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screws all as per drawing including taking out old unserviceable top, complete all as specified and directed.

M & L for replacement of table top of size 1160mm x 570mm with 18/19mm thick one side teak faced pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixe with screws with frame all as per drawing & and taking out old unserviceable top, complete all as specified and directed.

M & L for replacement drawer made out of 1mm thick MS black sheet including making shape, welding and painting with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer all as per drawing including taking out old unserviceable drawer, complete all as specified and directed.

M & L for replacement of damaged legs / stiffener with 25mm MS square tube of wall thickness 1.6mm by welding complete and applying with two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide primer all as shown on drawing including taking out old unserviceable leg / stiffener, complete all as specified and directed.

M & L for replacement of unserviceable lock of drawer with new lock of 6 lever 65mm long (best quality) with double key, complete all as specified and directed.

REPAIR TO TABLE OFFICER STEEL (FD-1003) M & L for replacement of table top of table office officer steel 1680mm x 870mm with 18/19mm thick one side teak face pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screws with frame all as per drawing including taking out old unserviceable top, complete all as specified and directed.

M & L for replacement of top of table office officer steel of size 1800mm x 1200mm with 18/19mm thick one side teak face pre-laminated particle board (exterior grade) with 4mm thick teak wood edging all round and fixed with screws with frame all as per drawing including taking out old unserviceable top, complete all as specified and directed.

M & L for replacement of damaged drawer of table made out of 1mm thick MS black sheet including making shape, welded with gas welding and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as per drawing & including taking out old unserviceable drawer, complete all as specified and directed.

M & L for replacement of damaged legs/stiffener with 25mm MS square tube of wall thickness 1.6mm and welding complete and painting with two coats of synthetic enamel paint over a coat of red oxide primer all as shown on drawing & including taking out old unserviceable leg/stiffener, complete all as specified and directed.

M & L for replacement of unserviceable lock of drawer with new lock of 6 lever 65mm long (best quality) with double key, complete all as specified and directed.

REPAIRS TO CHAIR CB STEEL WITH ARM (FD-75M) M & L for replacement of seat of chair CB steel with 2nd class hard wood well seasoned seat frame duly painted with two coats of synthetic enameled paint of black colour over a coat of primer including canning of seat complete as per Godrej pattern with 3mm wide half round white plastic cane and fixed with screw and washers as per drawing and including taking out old unserviceable seat, complete all as specified and directed.

All as per item No 10.00 here-in-before but back of chair, complete all as specified and directed.

M & L for replacement of stiffener of chair CB steel with flat iron 25mm x 3mm size, 500mm long fixed to frame by welding, complete all as specified and directed.

M & L for replacement of damaged arms with well seasoned 1st class hard wood duly painted with two coats of synthetic enameled paint of black colour over a coat of primer, all as per drawing, complete all as specified and directed.

M&L for providing new PVC cap 20mm dia including taking out old unserviceable cap from chairs CB steel with arm, complete all as specified and directed.

REPAIR TO CHAIR CB STEEL WITHOUT ARM (FD-75M) Repair to chair CB without arm by spot welding of legs/stiffener/frame as per drawing, complete all as specified and directed. (Note: Length of each spot welding shall not exceed 4cm in length and 2mm in thickness)

M & L for replacement of seat of chair CB steel without arm with 2nd class hard wood well seasoned seat frame duly painted with two coats of synthetic enameled black paint (1st grade quality) over a coat of pink primer including canning of seat complete as per Godrej pattern with 3mm wide white plastic cane half round and fixed with chair frame with 04 Nos screw with washers of size 75mm x 3mm all other as per drawing and taking out old unserviceable seat, complete all as specified and directed.

M & L for replacement of back of chair CB steel without arms with 2nd class hard wood well seasoned back frame duly painted with two coats of synthetic enameled black paint over a coat of primer including canning of back complete as per Godrej pattern with 3mm wide half round white plastic cane and fixed with chair frame with 04 Nos screw with washers of size 75mmx 3mm all other as per drawing and taking out old unserviceable back, complete all as specified and directed.

M & L for replacement of stiffener of chair CB steel with flat iron 25mm x 3mm size, 500mm long fixed to frame by welding, complete all as specified and directed.

M&L for providing new of PVC cap 20mm dia including taking out old unserviceable cap from chair CB steel, complete all as specified and directed.

REPAIR TO CHARPOY GI PIPE (FD-220) M&L for replacement of angle iron of size 25 x 25 x 5mm thick, 225mm long welded to long rail and short rail at corners of charpoy GI pipe drilling holes for fixing plywood with bolts and painting to angle iron pieces with two coats of black synthetic enameled paint (1st grade quality) over a coat of red oxide zinc chrome primer including taking out old one, complete all as specified and directed.

M&L for replacement of angle iron of size 25 x 25 x 5mm thick, 850mm long welded to long rail horizontally (one end to each long rail) at equal distance including drilling holes where ever required for fixing plywood with bolts and painting to angle iron pieces with two coats of black synthetic enameled paint (1st grade quality) over a coat of red oxide zinc chrome primer including taking out old one, complete all as specified and directed.

M&L for replacement of commercial plywood top of charpoy GI pipe size 1950mm x 900mm x 12mm thick, BWR grade, confirming to IS 303-1975 with 4mm wide 2nd class hard wood beading all-round the plywood, fixed to charpoy frame with and including nuts, bolts and GI washers (minimum 12 Nos. per charpoy), dia of bolt not less than 8mm including taking out old unserviceable plywood top, complete all as specified and directed.

Dismantling of old unserviceable / worn out long rail of the charpoy GI pipe and replace the same with new long rail made out of 32mm GI pipe including cutting threading etc. without damaging other parts, all as per drawing, complete all as specified and directed.

M&L for replacement of short rail (converted from U/S long rail), complete all as specified and directed.

M&L for replacement of legs converted from U/S short rail, (complete with clamps for FMN set), complete all as specified and directed.

M&L for replacement of wooden plugs made of 2nd class hard wood, as per drg, complete all as specified and directed.

M&L for replacement of GI elbow, three way (ISI marked) 32mm dia, complete all as specified and directed.

M&L for replacement of GI check nut (ISI marked), complete all as specified and directed.

REPAIR TO ALMIRAH MEDIUM STEEL (FD-67M & 1032) Taking down old unserviceable locking device from almirah medium steel and supply and fixing new lock of suitable size provided with duplicate keys, complete all as specified and directed.

M & L for repairing of door shutters by denting and necessary adjustment as required, complete all as specified and directed.

Taking down old unserviceable handle and supply and fixing new chromium plated brass handle, of size 125mm, fixed with screws, all as per drawing, complete all as specified and directed.

Taking down old unserviceable legs of almirah medium steel and supply and fixing (by welding) new legs made out of 1mm thick mild steel black sheet and applying with two coats of spray painting with synthetic enameled paint (1st grade quality) over a coat of red oxide zinc chrome primer to new legs including preparation of surfaces, all as per drawing, complete all as specified and directed.

Taking down old unserviceable shelves of almirah medium steel and supply and fixing new shelves made out of 1mm thick mild steel black sheet made to shape and applying two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer to new surfaces of shelves including preparation of surfaces, all as per drawing, complete all as specified and directed.

M&L for running welding in repairs to broken/damaged sides (left/right), back and top of almirah steel large, complete all as specified and directed. (Note: Thickness of materials to be welded n. exc 2mm thickness and length of each welding exc 10mm and n. exc 20mm in length)

REPAIR TO BED HARD STEEL (FD/E6/MAP/08R) M & L for replacement of plank of head rest by replacing with 18mm thick pre-laminated particle board screwed to MS strip and welded to 18mm rectangular pipe, all as per drawing including taking out old unserviceable plank of head rest, complete all as specified and directed.

M & L for replacement of plank of foot rest by replacing with 18mm thick pre-laminated particle board screwed to MS strip and welded to 18mm rectangular pipe, all as per drawing including taking out old unserviceable plank of head rest, complete all as specified and directed.

M & L for spot welding n. exc. 2.50cm in length of broken steel frame of bed hard steel. All joints welding and fixing shall be done in accordance with standard workmaship/specification and all steel member shall be powder coated, complete all as specified and directed.

M&L for replacement of top of bed hard steel with 12mm thick plywood, BWR grade, to same platform with screw including removing of old unseviceable plywood top, complete all as specified and directed.

S&F best quality hard rubber shoes to legs including removing of old unseviceable legs, complete all as specified and directed.

REPAIR TO CHARPOY IP HARD TOP AND CHARPOY WITH HARD TOP (FD/MAP-II/01) M&L for replacement of top of charpoy with 12mm thick plywood, BWR grade, to same platform with screw including removing of old unseviceable plywood top, complete all as specified and directed.

M & L for spot welding n. exc. 2.50cm in length of broken steel frame of charpoy IP hard top. All joints welding and fixing shall be done in accordance with standard workmaship/specification and all steel member shall be powder coated, complete all as specified and directed.

S&F best quality hard rubber shoes to legs including removing of old unseviceable legs, complete all as specified and directed.

REPAIR TO TEAPOY VERANDAH (FD- 232, 382 & FD/E6/MAP/17) M & L for replacement of top of tea poy verandah made out of 18/19mm thick pre laminated particle board one side teak face (exterior grade) with 4mm thick teak wood edging all round, all as per drawing including taking out old unseviceable top, complete all as specified and directed.

M & L for spot welding n. exc. 2.50cm in length of broken steel frame of teapoy verandah, complete all as specified and directed.

TABLE COMPUTER (FD/E6/MAP-II/03 & TP OF SIMILAR PATTERN) S&F new table top of table computer made out of 18mm thick pre-laminated particle board, laminated on both sides with 4mm thick teak wood beading all around the edges, all as per drawing including removing of old unseviceable table top, complete all as specified and directed.

S&F new shelf of table computer made out of 18mm thick pre-laminated particle board, laminated on both sides all around the edges, all as per drawing including removing of old unseviceable shelf, complete all as specified and directed.

S&F new key board steel of table computer of size 450mm x 480mm of 18mm thick pre-laminated particle board, laminated on both sides all around the edges, all as per drawing including removing of old unseviceable key board steel, complete all as specified and directed.

S&F new drawer box of size 75mm deep of table computer made out of 18mm thick pre-laminated particle board, laminated on both sides all around the edges, all as per drawing including removing of old unseviceable drawer box, complete all as specified and directed.

S&F new knobs of table computer made out of high density material, all as per drawing including removing of old unseviceable knob, complete all as specified and directed.

S&F new side board of table computer made out of 18mm thick pre-laminated particle board, laminated on both sides all around the edges, all as per drawing including removing of old unseviceable side board, complete all as specified and directed.

S&F new nylon buffers of table computer made out of high density material, all as per drawing including removing of old unseviceable buffers, complete all as specified and directed.

S&F new telescopic channel of table computer, all as per drawing including removing of old unseviceable telescopic channel, complete all as specified and directed.

REPAIR TO CHAIR VARANDAH (FD/E6/MAP/12) S&F new seat and back of chair varandah, pre-fabricated, with best quality plastic sheet of approved make including taking out old unseviceable plastic seat and back, complete all as specified and directed. (Make : Cello/AMKO/COMPO)

M&L for spot welding in repair n. exc. 2.50cm in length of broken steel frame of chair verandah, complete all as specified and directed.

M & L for providing new hard rubber shoe for chair verandah, all as per existing and as approved, complete all as specified and directed. (FD-19M/256/359)

REPAIR TO RACK SHOE STEEL (FD/E6/MAP/02R) M&L for spot welding 25mm in length including painting the welded parts to match with existing, as per drawing, complete all as specified and directed.

M & L for providing new hard rubber shoe for rack shoe steel, all as per existing and as approved, complete all as specified and directed.

REPAIR TO RACK SHOE STEEL (FD/E6/MAP/02R) M&L for replacement of glass of shutter of book case steel of size 695mm x 285mm x 5mm thick including taking down old unserviceable glass, complete all as specified and directed.

S&F of aluminium handle of size 100mm including taking down old unserviceable broken handle, as per drawing, complete all as specified and directed.

S&F of lock of size 50mm with double key including taking down old unserviceable lock, as per drawing, complete all as specified and directed.

M&L for spot welding of broken joints n. exc. 25mm in lengthincluding painting the welded parts to match with existing, as per drawing, complete all as specified and directed.

M & L for scrapping out old painted (external and internal) surface of almirah large steel and applying two coats of spray painting with synthetic enamel paint (1st grade quality) over a coat of red oxide zinc chrome primer including preparation of surfaces and filling cavities with putty, complete all as specified and directed. (Drg No. FD- 67 & 1031)

All as per item No.21.00 here-in-before but chair writing steel, chair visitor, complete all as specified and directed. (Drg No. FD/E6/MAP/12, TP)

All as per item No.21.00 here-in-before but table dining ORs, all as per existing and as approved, complete all as specified and directed. (FD-165M)

All as per item No 21.00 here-in-before but locker steel, complete all as specified and directed. (Drg No. TD, FD- 1029)

All as per item No 21.00 here-in-before but table 3' x 2' with drawer steel, complete all as specified and directed. (Drg No. FD- 1008)

All as per item No 21.00 here-in-before but table 3' x 2' without drawer steel, complete all as specified and directed. (Drg No. FD- 1008)

All as per item No 21.00 here-in-before but table 3' x 3' steel, complete all as specified and directed. (Drg No. FD- 1009)

All as per item No 21.00 here-in-before but table office clerk steel, complete all as specified and directed. (Drg No. FD- 1004)

All as per item No 21.00 here-in-before but table office officer clerk steel, complete all as specified and directed. (Drg No. FD- 1002)

All as per item No 21.00 here-in-before but chair CB steel with arm, complete all as specified and directed. (Drg No. FD- 75)

All as per item No 21.00 here-in-before but chair CB steel without arm, complete all as specified and directed. (Drg No. FD- 75)

All as per item No 21.00 here-in-before but almirah medium steel, complete all as specified and directed. (Drg No. FD- 67 & 1032)

All as per item No.21.00 here-in-before but bed hard MAP, complete all as specified and directed. (Drg No. FD/E6/MAP/08R).

All as per item No.21.00 here-in-before but charpoy IP hard top, complete all as specified and directed. (Drg No. FD/MAP-II/01).

All as per item No.21.00 here-in-before but teapoy verandah, complete all as specified and directed. (Drg No. FD-232, 382, FD/E6/MAP/17).

All as per item No.21.00 here-in-before but table computer, complete all as specified and directed. (Drg No. FD/E6/MAP-II/03) TP-Similar Pattern.

All as per item No.21.00 here-in-before but chair varandah, complete all as specified and directed. (Drg No. FD/E6/MAP-12)

All as per item No.21.00 here-in-before but rack shoe steel, complete all as specified and directed. (Drg No. FD/E6/MAP-02R)

All as per item No.21.00 here-in-before but book case steel, complete all as specified and directed. (Drg No. FD-90, FD-69(M), FD-1028)

All as per item No.21.00 here-in-before but rack steel adjustable 3075 x 900 x 50mm/1905 x 915 x 305mm, complete all as specified and directed. (Drg No. FD-84)

All as per item No.21.00 here-in-before but rack steel adjustable 6 tier, rack steel 6 tier, complete all as specified and directed. (Drg No. FD-1038)

M & L for providing new hard rubber shoe for table dining Ors 3' x 2' with/without drawer steel, table 3' x 3' steel, table office clerk steel, table officer steel, all as per existing and as approved, complete all as specified and directed. (FD-165M, FD-1008, FD-1009, FD-1004, FD-1002)

Note: An amount of Rs.24,212.00 on account of Credit Schedule for schedule 'A' part - II shall be deducted from the total amount of BOQ to arrive at the contract sum.

M/S DEY ENTERPRISE (BID ID -3288562)

CONSTRUCTION SHELTER (BID ID -3288570)

M/S RELIABLE CONSTRUCTION CO. (BID ID -3287579)

BHARAT ELECTRIC (BID ID -3288391)

SHRI D P AGARWAL (BID ID -3288413)