Constructing Anganwadi Building at Kokare Budarwadi Tal Chiplun Dist Ratnagiri

Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavatedmaterial up to a distance of 50m. beyond the building area andstacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary backfilling, ramming,watering including shoring and strutting etc. complete. (Lift upto 1.5 m.) By Mechanical Means

Excavation for foundation in Hard rock by chiselling, wedging, line drilling, etc. including trimming and evelling the bed,removing the excavated material upto a distance of 50 metres beyond the building area stacking as directed, dewatering and back filling with available earth / murum watering, ramming etc.complete. (Liftupto1.5m). By Mechanical Means

Providing and laying Cast in situ / Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer /concrete Batch mix plant (Panmixer) etc.complete.With fine aggregate (Crushed sand VSI Grade)

Providing Laterite stone masonry in cement mortar 1:6 in foundation and plinth including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding.

Providing and laying Cast in situ/Ready Mix cement concrete M-15 of trap/ granite/quartzite/gneiss metal for coping to plinth or parapet, moulded or chamfered as per drawing or as directed including steel centering, plywood / steel formwork compacting ,roughening them if special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete.The Cement Mortar 1:3 plaster is considered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tar paulin etc.(Wooden centering will not be allowed.) With fine aggregate (Crushed sand VSI Grade)

Filling in plinth and floors with approved excavated material in 15cm. to 20cm. Layers including watering and compacting etc. complete.

Providing dry/ trap/ granite/ quartzite/ gneiss rubble stone soling 15 cmto 20 cm thick including hand packing and compacting etc. complete.

Providing Laterite stone masonry in cement mortar 1:6 in Super structure including racking out joints when plastering is to be done/striking joints when no plastering is to be done watering and scaffolding.

Providing and fixing frame with / without ventilator of size as specified with Country cut teak wood for doors and windows including chamfering, rounding, rebating, iron holdfast of size 300mm x 40mm x 5mm with oil painting, etc. complete

Providing and fixing solid core flush door shutter in single leaf 32 mm thick decorative type of exterior grade as per detailed drawing sapproved face veneers 3 mm thick on both faces or as directed ,all necessary beads,mouldings and lipping ,wrought ironholdfasts, chromium plated fixtures and fastenings, with brassmortise lock, chromiumplated handles on both sides, and finishing with French Polish etc. complete

Providing and fixing 30 mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting off rame made outof M.S. tubes o 19 gauge thickness and size of 40mm x 20 mm for stiles,top, lock and bottom rails.M.S. frame shall have acoat of steel primers of approved make and manufacture .M.S. frame shall be covered with 5mm thick heat molded PVC channel of size 30 x 100 mm formings tiles, and 5 mm thick, 125 mm wide PVC sheets for topr ail, lock rail and bottom rail one ither side, and 15mm (5mm x 3) thick ,20 mm wide cross PVC sheet as gap insert for top rail and bottom rail. Paneling of 10 mm thick prelam PVC sheet to be fitted in the M.S.frame welded /sealed to the stiles and rails with 30 mm wide x 5 mm thick PVC sheet beading on either side, and joined together with solvent cemen adhesive etc.An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the C Channel using PVC solvent cement adhesive. including stainless steel fixtures and fastening Complete as per direction of Engineer in charge,manufacturers specification and drawing.

Providing and fixing in position. (asperI.S.1868/1982) aluminium sliding window of two tracks with rectangular pipe having over all dimension?63.50 x 38.10 x 1.02 mm at weight 0.547 Kilogram / One Running Metre. and window frame bottom track section 61.85 x 31.75 x1.20 mm at weight 0.695 Kilogram / One Running Metre. Top and side track section 61.85 x 31.75 x1.30 mm at weight 0.659 Kilogram / One Running Metre. The shutter should be of bearing bottom40 x 18 x 1.25mm at weight 0.417 Kilogram / One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram / One Running Metre.And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / On eRunning Metre. and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in chargewith all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and self locking catch fitted in vertical section of shutter including 5 mmt hick plain glass with all required screws and nuts etc, complete.With powder coating without box

Providing and fixingin position (as per 1868 / 1982)Aluminium sliding window of three tracks with rectangular pipe 95 x 38 .10 x 0.90 mm at weight 0.637 Kilogram / One Running Metre.with window frame bottom track section 92 x 31.75 x 1.30 mm at weight 1.070 Kilogram / One Running Metre..Topand side track section 92 x 31.75 x 1.30 mm a weight 0.933 Kilogram /Running metre. The shutter should be of bearing bottom 40 x 18 x 1.25 mm at weight 0.417 Kilogram /One Running Metre. Inter locking section 40 x18 x1.10 mm at weight 0.469 Kilogram / Running metre. and handle and top section 40 x 18 x 1.25 mm at weight 0.417 Kilogram / Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon castinging 5 mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required screwsand nuts etc,complete.With powder coating without box

Providing and fixing in position powder coated aluminium louvered windows / ventilator of various sizes with powder coating as per detailed drawing and specifications including aluminium frames 80 x 38 mm x 1.22 mm box type, 5 mm thick sheet glass louvers, of approved quality etc. complete.

Providing and laying Cast in situ / Ready Mix cement concrete M-20 of trap / granite/ quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including steel centering, formwork, cover blocks, laying/ pumping, compactionand roughening the surface if special finish is to be provided and curing etc.complete. (Excluding reinforcement and structural steel). with fully automatic micro process or based PLC with SCADA enabled reversible Drum Type mixer / concrete Batchmix plant (Panmixer) etc. complete.With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landings as per detailed designs and drawings including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing and laying Cast in situ /Ready Mix cement concrete M-20 of trap/ granite/ quartzite/gneiss metal for R.C.C. chajja as per detailed design and drawings including steel centering, formwork ,cover blocks, laying / pumping, compacting and roughening the surface if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel ).with fully automatic micro processor based PLC with SCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Panmixer) etc. complete. With fine aggregate (Crushed sand VSI Grade)

Providing internal cement plaster 12mm thick in single coat in cement mortar 1:5 with neeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc. complete.

Providing and applying Two coats of wall care Putty on plastered surface and Ceiling and Walls to prepare surface even and smooth of approved make, etc complete

Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using water proofing compound at 1 Kilogram per cemen tbag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete.

Providing sills of polished Kadappa stone 25mm to 30mm thick, on a bed of 1:4 cement mortar including cement float, filling joints with slurry, curing polishing and cleaning etc. complete.

Providing and laying matt finish ceramic tiles of having size 30 cm x 30 cm confirming to I.S.15622/2006 (group D II-A) and 7 to 8 mm thick for flooring in required position laid on a bed of 1:4 cement mortar including cement float, filling joint with white/colour cement slurry cleaning curing etc. complete.

Providing and laying ceramic tiles of having size 30 cm. x 30 cm. and confirming to corresponding I.S. for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/ colour cement slurry cleaning curing etc. complete.

Providing structural steel work in trusses, other similar trussed purlins and members with allbracing, gusset plates etc. as per detailed designs and drawings or asdirected including cutting, fabricating, hoisting, erecting fixing in position, Making riveted / bolted/ welded connection and one coat of anti corrosive paintand over it 2 coats of oil painting approved quality and shade etc. complete.

Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete.

Providing and fixing Mangalore tiled roofing with class ' AA' tiles including securing the last course of tiles near the eaves with steel flat 40 mm x 3 mm and 1.22 mm wire fixing 50 mm x 25 mm horizontal teak wood battens and iron works and oiling the battens etc. complete. (Excluding ridge and hip tiles).

Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding without flushing tank and its accessories etc. complete.

Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including P.V.C. waste pipe and trap up to the outside face of the wall. Making good the damaged surface, testing etc. complete.

Providing and fixing black kadappa stone as shelves 25mm. thick machine polished, extending the polish upto 20 cm width on lowerside, rounding corners, laying in position jointing with bedding cement mortar 1:4 proportion curing etc etc. complete.

Providing, laying and fixing P.V.C. pipe of 110 mm. dia. with fittings such as bends, tees, reducers, clamps, etc. including necessary excavation, trench filling etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing on walls/ ceiling/ floor 15 mm dia. CPVC pipe with necessary fittings, remaking good the demolished portion etc. complete. Including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. complete.

Providing and fixing H.D.P container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet,outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 liters

Providing and fixing 15 mm dia. screw down bib/ stop tap of brass including necessary socket union nut complete.

Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces. (excluding the primer coat.) etc. complete.

Providing and fixing N.H . /S.H. Route Marker size 60 cm x 45 cm with one No.direction plate of size 30 cm x 25 cm prepared on 16 gauge M.S.sheet including painting with one coat of zinc cromate stoving primer and two coats each of white and green back ground and back side gray stovee namelled, bonded with cut out of red Retro reflective sheet Engineering grade,border/ letters / numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100 % reflection including one One Number of M.S.Angle iron post of size 50 x 50x 5 mm of 3.65 m. long in flated at bottom drilled on to pin one piece without joint painted with white and black bands of 30 cm. fixing board and post with 4 Nos .of high strength G.I. bolts and nuts of size 10 mm dia.and 20 mm long including all taxes, conveying, fixinging round with cement concrete 1:4:8 block of 60 cm x 60 cm x 75 cm size as directed by Engineer-in-charge etc.complete. Mild Steel Route Marker with Engineering Grade

Test Reports- Basic Cement test, Strength of CC Cube

Royalty

Please Enable Macros to View BoQ information