Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹15.4 LAccepted-AOC | 1 | Accepted-AOC Accepted L1 | |
| 2 | 2₹16.5 L+₹1.1 L (6.95%)Rejected-AOC | 2 | Rejected-AOC Rejected | |
| 3 | 3₹16.9 L+₹1.5 L (9.39%)Rejected-AOC | 3 | Rejected-AOC Rejected | |
| 4 | 4₹17.3 L+₹1.9 L (12.3%)Rejected-AOC | 4 | Rejected-AOC Rejected | |
| 5 | 5₹18.9 L+₹3.4 L (22.2%)Rejected-AOC HOUSE NO 214 WARD NO 2 TEHSIL SUJANPUR DISTT HAMIRPUR HP | HAMIRPUR | HIMACHAL PRADESH | 174304 | 5 | Rejected-AOC Rejected |
Tender Value
₹22.1 L
EMD Value
₹44,200
Closing Date
27 Jan 2023, 11:00 amClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
DCF Rohru
DCF Rohru, Upper market rohru, Dist. Shimla, H.P. 171207
c/o Forest Guard Hut at Sharontha beat, Tikkar Forest Range under Rohru Forest Division
2023_FD_67253_1
468/2023
Open Tender
Civil Works - Buildings
Item Rate
60 days
Sharontha, sub-tehsil Tikkar, tehsil Jubal
Please refer Tender documents.
2 documents required · 2 mandatory
₹500
DFO Rohru
₹44,200
1 Mar 2023
18 Jan 2023
27 Jan 2023
18 Jan 2023
27 Jan 2023
18 Jan 2023
Excavation in foundation, trenches etc. in earth work, lift up to 1.50mtrs stacking the excavated soil not more than 3 mtr clear from the edge of the excavation and then returning the stacked soil in 15 cm layers, when required in to plinths side of foundations etc. Consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 mtrs.
Providing and Laying concrete 1:6:12 (one cement: six sand: twelve graded stone aggregate 40 mm (forty millimeter nominal size) for plain/reinforced concrete in open foundations complete as per drawing and technical specification clauses 802, 803, 1202 and 1203 including carriage of material with in all leads and lifts as per direction by the Engineer-In-Charge including all leads and lifts
Stone Random Rubble Masonry work In cement mortar 1:6 (1 cement : 6 sand ) in foundation complete as per drawing and technical specifications Clauses 702, 704, 1202 & 1203..including carriage of material with in all leads and lifts as per direction of Engineer-In-Charge.
Providing from work with steel plates 3.15 mm thick welded with angel iron in frame 30X30X5mm so as to give a fair finish including centering shuttering strutting propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for instu-reinforced conc. and plain concrete in a) Foundations footings basis of columns etc. and mass concrete including all leads and lifts, as per HPPWD, specification of 1990 volume-I as directed by the Engineer-In-Charge
Providing from work with steel plates 3.15 mm thick welded with angel iron in frame 30X30X5mm so as to give a fair finish including centering shuttering strutting propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for instu-reinforced conc. and plain concrete in: -Sides and soffits of beams, beam hauntings, cantilevers, bressumers and lintels not exceeding 1 meter in depth in all heights from floor. Sides, Soffits, Beam, hauntings, cantilevers ,bressumers etc.
Providing from work with steel plates 3.15 mm thick welded with angel iron in frame 30X30X5mm so as to give a fair finish including centering shuttering strutting propping and centering below supporting floor to ceiling not exceeding 4mtrs.and removal of the same for instu-reinforced conc. and plain concrete in :-Columns Pillars Posts,strutsetc square,rectuangular or polygonal in plain:
Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in: in foundation and plinth
Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in: Column pillar post and struts
Providing and laying cement concrete 1:2:4(1 cement:2 sand :4 graded stone aggregate 40mm nominal size)and curing complete excluding cost of form work in:-Suspended floor roof landing shelves their supports balconies beams etc.
Providing Mild steel/Tor steel reinforcement for RCC work including bending, binding and placing in position complete upto floor toe level:-Tor steel
Half brick masonry in common burnt clay building bricks in cement mortar 1:4 (1cement: 4sand) 2nd class bricks in foundation and plinth
Stone soling properly hand-packed filling interstices with Kharanja stone and consolidating with power road roller to the requested gradient and comber including spreading watering and rolling of binding materials moorum or earth etc. complete as per HP.PWD specification. 100 mm spread thickness (finished work including materials and labor)
Cement concrete flooring 1:2:4 cement: 2 sand: 4 graded stone aggregate 20 mm nominal size) laid in one layer finished with a floating coat of neat Cement.
Providing and laying spartic ceramic tiles 5.5mm.thick in flooring (300 x300mm. size)treads of steps laid on a bed of 12mm. thick cement mortar 1:3(1cement: 3 sand) finished with flush pointing in white cement.
Providing woodwork in frames of doors, windows, clerestory, windows and other frames wrought, framed and fixed in position.2nd class deodar wood.
Providing and fixing paneled glazed or paneled and glazed shutters for door, windows and clerestory windows including black enameled iron but hinges with necessary screws(i) 40mm thick, 2nd class deodar wood including all leads and lifts, as per HPPWD, specification of 1990 volume-I, as directed by the Engineer-In-Charge.
15mm cement plaster in single coat on fair side of brick/concrete/stone walls for interior plastering upto floor two level including arises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth.
White glazed glossy tiles 6mm thick in skirting risers of steps and dado 12mm thick cement mortar 1:3 (1cement: 3sand) and jointed with cement slurry as per specification including all leads and lifts, as per HP:PWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge
Providing and fixing 19mm thick water proof commercial board in shelves/box for cupboard with butt joints & fixing with nails & screws etc. complete)
Providing and fixing 1.00mm thick coloured or plain lamination sheet (sun mica) on boards/ply wood sheets with approved adhesive and nails etc. complete.
Providing and laying granite stone in flooring 20mm(average)thickness base of cement mortar 1:3(1cement: 3 sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of granite stone i/c rubbing and polishing complete. 20mm.thick
Applying Birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final matter finish to the surface complete.
Finishing wall with weather proof exterior grade emulsion of approved design (Apexultima) or its equivalent on undecorated wall surfaces (two coats) to give an even shade and final finish after thoroughly cleaning the surface to remove all dirt, dust and other foreign matter etc. including sand paper smooth complete.
Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil grease, dirt and other foreign matter sand papering and knotting (a) Ready mixed paint brushing wood primer pink including all leads and lifts, as per HP:PWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Painting two coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surfaces of all dirt, dust and other foreign matters sand papering and stopping including carriage within all leads, lifts of materials and other incidentals:- with enamel paint other than white.
Providing Preprinted sheet corrugated G.I sheet roofing with galvanized iron J or L hooks bolted and nuts 8mm diameters with bitumen and G.I limpet washers filled with white lead completed excluding the cost of purlins, rafters and trusses(i) 0.63mm thick sheet including all leads and lifts, as per HPPWD, spec imitation of 1990 Volume-I, as directed by the Engineer-In-Charge.
Steel work welded in built up sections, trusses and framed work including cutting hoisting, fixing in position and applying a priming coat of lead paint in gratings, frames ,girders etc.
Providing ridges or hips 60cm overall in plain with galvanized iron G.I sheet fixed J or L hooks bolts and nuts 8mm dia G.I limpet and bitumen washers complete (i) 0.63mm thick sheet including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-charge.
Providing valleys 90cm overall plain G.I sheet fixed with galvanized iron J or L hooks bolts and nuts 8mm dia G.I limpet and bitumen washers complete (i) 0.63mm thick sheet including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Providing and fixing 15cm wide and 45cm overall semicircular plain G.I sheet gutter with iron brackets 40x30mm size bolts and nuts and washer etc. including making necessary connection with rain water pipe complete (i) 0.63mm thick sheet including all leads and lifts, as per HP:PWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Providing and fixing M.S. BP Sheet 1.66mm to 2.00 mm thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer as well as painting complete as per the instruction of Engineer-in-charge.
Providing 40x3 mm flat iron hold fast 40mm. Long including fixing to frame with 10m diameter bolts nuts and wooden plugs and embedding in cement concrete block 30x10x13 sand: 6 graded stone aggregate 20mm nominal. 1:3:6 (1 cement :3sand:6graded stone aggregate)
Fixing of anodized aluminum sliding door bolt anodized transparent or dyed to required color and shade with bolts and nuts screws etc.
Fixing of tower bolt (barrel type anodized transparent or dyed to required color and shade with bolts and nuts screws etc. Complete
Fixing of handles anodized transparent or dyed to required color and shade with bolts and nuts screws etc. complete
Providing and fixing vitreous China wash down, water closet(European Type W.C Pan) with integral P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (1cement: 1sand)(seat and cover to be measured and paid for separately (i) Anglo Indian including all leads and lifts, as per HPPWD, specification of 1990 volume-I as directed by the Engineer-In-Charge
Providing and fixing 600x450mm beveled edge mirror or superior glass mounted on 6mm thick a.AC sheet or plywood sheet and fixed to wooden plug with C.P brass screws and washers including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Providing and fixing chromium plated brass soap dish with C.P Brass brackets fixed to wooden cleats with C.P brass including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Providing and fixing C.P Brass bib tap with capstan head (i) 15mm dia including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Providing and fixing C.P Brass pillar tap 15mm dia including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Providing and fixing sand cast iron/cast iron spun fittings and accessories: (a) Bends of required degree(any radios) (I) With oval access door insertion rubber washers 2mm thick, bolts and nuts complete (i) 100mm nominal size including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Providing and fixing sand cast iron/cast iron spun fittings and accessories: (a)PLAIN BEND 100mm dia
Providing and fixing sand cast iron/cast iron spun fittings and accessories: (a)OFF SET with 100 nominal dia with 76 mm projection
Providing and fixing sand cast iron/cast iron spun fittings and accessories: (C) Singles equal branch of required degree: (I) plain 100 mm Dia
Providing and fixing sand cast iron/cast iron spun fittings and accessories: (C) Collars: (i) 100mm nominal size.
Providing and fixing high pressure PVC spigot and socket, waste and ventilating pipes ISI marked including fixing with approved adhesive etc. Complete
Providing and fixing to wall ceiling and floor galvanized mild steel tubes(Medium grade) tube fittings and clamps including making good the wall, ceiling and floor (i) 15mm nominal bore including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Providing and fixing1000 liters net capacity PVC water storage tank of ISI:12701 marked, G.I .inlet and outlet connection 15 mm nominal bore ball valve and mosquito proof PVC cover with locking arrangement including hoisting up to all heights above ground including carriage of materials within all leads and lifts by all means & other incidentals. .
Providing and fixing C.P steel grating for wash basin and sink including carriage of materials within all leads and lifts by all means & other incidentals. . i) 100 mm dia
Providing and fixing composite end seal compression fittings as per IS 15450-2004 for cold water supply high grade pressure pipes fittings/ accessories including carriage of materials within all leads and lifts
Door Bends of required degree (any radius) :-With oval access door insertion rubber washer 3 mm thick, bolts and nuts complete including carriage of materials within all leads and lifts :-
Providing and fixing ISI marked high pressure PVC (finolex) of working pressure not less than 4.5 kg/sqm in trenches including fixing of joints properly with approved adhesive complete in all respects including carriage of materials within all leads and lifts as per direction of Engineer in charge
Providing and fixing vitreous china wash basin with single hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fittings FLAT BACK category No 1025 including carriage of all labor equipment’s and materials to various location through all modes of transportation in all leads and lifts, including all incidental charges
Providing and fixing 680 X 450 mm (five hundred fifty into four hundred millimeter) stain less steel sink with single/ double hole for pillar tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding fitting including carriage of materials within all leads and lifts.
Supplying and fixing woven plains G.I. wire fencing of mesh 50mm to 150mm to any type of standard rails, straining bolts. etc. including provision of binding wire, staples etc. including painting
Providing and fixing Mixer for kitchen sink with casted swinging spout at top.
Constructing manhole with R.C.C top slab in 1:2:4 mix in (1cement: 2sand: 4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 (1cement: 4sand: 8 graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1cement: 2sand: 4 graded stone aggregate 20mm nominal size) finished smooth complete including cutting and testing Inside size 800x800mm and 500mm deep including C.I cover with frame light duty single seal pattern (i) 450x610mm internal dimension total weight of cover and frame to be not less than 38 Kg (weight of cover 23 Kg and weight of frame 15 Kg) (a) With 200mm thick walls of brick masonry using common burnt clay building bricks in cement mortar 1:3 (1cement: 3sand) including all leads and lifts, as per HPPWD, specification of 1990 Volume-I, as directed by the Engineer-In-Charge.
Supplying cast iron cover without frame for main hole. A) For frame of internal dimensions 455 mmx610 mm rectangular C.I cover (light duty single seal pattern-I) the weight of cover to be not less than 23 (twenty three) kg. Including carriage of materials within all leads and lifts by all means & other incidentals.
Yogesh Chauhan
CHATTER SINGH RATHORE
Devinder Sharma
RAJNEESH THAKUR
Lokinder Dhanta
Sunil Kumar
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .