Repairs to Roa, culver, foot path and road side furniture at AF Stn under GE Brichgunj, Sri Vijaya Puram

Repair to potholes any depth not exc 1 Sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc cutting around edges to at least 25mm in depth, making good by applying tack coat at 5 Kg per 10 Sqm and putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sqm, binded with 0.09 cum of stone chippings, 6.3mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30mm etc complete all as specified and as directed by Engr-in-Charge/GE.

M&L for preparing black top surfaces by brushing with wire brushes for removing caked mud etc sweeping with broom and finally fanning the cleaned surfaces with gunny bags to remove all lose dirt etc on black top surfaces and applying evenly a priming/tack coat with bituminous primer (VG -10) @ 5 Kg/10 Sqm with paving bitumen complete all as specified by Engr-in-Charge/GE.

M&L for premix bituminuos macadam (consolidated thickness not more than 75mm )with 4% binder content of paving bitumen of grade (VG -30) by weight of total mix laid and rolled with 8-12 tonne power roller to required gradient and camber up to the outer edges of roads on existing black top surfaces using mechanical paver only complete all as specified and directed by Engr-in-Charge/GE.

M&L Bituminous premix semi dense asphaltic concrete 40mm consolidated thickness with 5.5% binder content VG-30 by weight by total mix, by hot process and laid by mechanical paver only, rolling with 8-12 ton power roller and compacted to required camber and gradient etc complete as specified and directed by Engr in charge/GE.

M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimunm 2.5mm thick, double coat as in centre line and edge line road marking in white/yellow (colour to be approved by GE) colour & shade of 150/100mm width using 'HOT MARK' termoplastic modern propelled road marking machine incl all ingredients such binder, glass beads, titanium dioxide, calcium carbonate inter fillers termoplastic requirement for glass beads shall be as per table No. 800.4 of MoST specification incl spraying glass beads etc all as per manufacturers instructions complete all as specified and directed by Engr-in-Charge/GE

S&F in repair metal tubular delineator fitted with reflector mounted on 60mm dia MS pipe of 600mm height duly powder coated and thermo plastic elastomer 2 bands of red reflector radium tape with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 including necessary earthwork required for post holes complete all as specified and directed by Engr-in-Charge/GE.

S&F in repair metal tubular delineator fitted with solar reflector mounted on 40mm dia MS pipe of 1000mm height duly powder coated and thermo plastic elastomer 2 bands of red reflector radium tape with anti theft steel net for reflector protection including embedding in PCC 1:2:4 (150x150x300mm) type B1 including necessary earthwork required for post holes complete all as specified and directed by Engr-in-Charge/GE.

S&F in repairs cat eye reflective type of size 100mm x 100mm x 20mm (ABS Body) with retro reflective panel of Amber, Red or white colour (colour as approved by GE), fixed all as per manufacturers instructions etc complete all as specified and as directed by Engr-in-Charge/GE.

S&F in repairs solar cat eye aluminum alloy shell (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 mcd fixed all as per manufactures instructions complete all as specified and as directed by Engr-in-Charge/GE.