ADDN/ALTN/IMPROVEMENT TO CERTAIN SMQS AT AFS RAJOKRI (PH-III)

Amount

Demolition of cement concrete (un-reinforced) of any description & in any position not specifically provided for complete including dismantling of floor tiles etc complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc and including removal of debris and rubbish from the site complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises. Complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness laid, bedded and pointed in any mortar in floors, aprons etc. complete all as specified and directed.

M&L for 25mm thick plain cement concrete (1:2:4) type B-0 (using 12.5 mm graded stone aggregates) as in sub base of flooring/tiles etc complete all as specified and directed.

M&L for Cement concrete 1:5:10 type E-2 using 40mm graded brick aggregates as in sunken portion of Bath/WC etc complete all as specified and directed.

M&L for rendering 15 mm thick in CM (1:3) mixed with water proofing compound @ 3% by weight of cement finished even and smooth without using extra cement in sunken portion of toilet including applying first layer of cement slurry @ 0.488 Kg/Sqm mixed with Acrylic based polymer modified cementitous composite compound @0.253 Kg/Sqm (the layer shall be allowed to air cure for 4 hours followed by water curing for 48 hours). 2nd layer acrylic based polymer modified cementious composite compound slurry after air of 1st coat for 4 hours, as per manufacturer's instruction complete all as specified and directed. Note: WPC will be measured and paid separately under relevant of Sch 'A'.

M&L for PCC 1:2:4 type B1 (using 20mm graded stone aggregates) as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, coping, bed plates and the like including weathering, slightly rounded or chamfered angles and throating including necessary form work, complete all as specified.

M&L for screed bed or bedding layer of mortar 15 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified and directed.

M&L for 10 mm thick rendering in cement mortar (1:3) on vertical surfaces for backing of tiles etc complete all as specified and directed.

M&L for screed bed or bedding layer of mortar 20 mm thick in cement mortar (1:4) for bedding of tiles complete all as specified and directed.

M&L for Non - skid (joint free) coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Non - skid (joint free) coloured Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified.

M&L for Non - skid (joint free) coloured Ceramic coloured tiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors/skirting etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 300X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and directed.

M&L for Machine cut kota stone slab flooring 20-25mm thick bull nosed edge over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for Machine cut kota stone slab 20-25mm thick in riser of steps, skirting, dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

M&L for 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plat forms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and directed.

Demolition of reinforced cement concrete (reinforcement cut as required to facilitate demolition ) of any description in any position not specifically provided complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in chajjas complete all as specified and directed.

M&L for providing reinforced cement concrete (1:2:4) type B1 (using 20mm graded crushed stone aggregate) as in fins, fascias, louvres, parapets, and railings exc. 60 cm in height, newels, balustrade, and the like complete all as specified and directed.

M&L for Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips etc complete all as specified and directed.

All as per item No.24 here-in-before but 6 mm dia to 8 mm dia complete all as specified and directed.

M&L for Formwork to soffits of suspended slabs such as roof slabs, floorslabs, landings and similar work not exceeding 200 mm thick rough finished in flat surface complete all as specified and directed.

M&L for Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 5 cm but n exc 10cm wide rough finished complete all as specified and directed.

M&L for Formwork to fins, louvers, fascia/parapet wall rough finished in flat surface complete all as specified and directed.

M&L for guniting work to RCC work in column, flooring, side walls, beam, slab, etc by removing loose concrete cover etc, cleaning of surface with wire brush and applying epoxy paint to rusted reinforcement and S&F welded wire mesh fabric or wire net less than 95 X 95X 3 mm adhesive, plaster grade for concrete admixture 1 part of cement and 3.5 part of sand and average thickness 40 mm and making the surface even including 15mm thick plastering in cement mortar (1:4) on brick or concrete surfaces including finishing the surfaces even and smooth, without using extra cement plumb and making surface true to geometry in line and including necessary form work to be carried at upto double storey building, complete all as specified and directed. Note.- Whereever reinforcement required will be measured and paid seperately.

Demolition of Mud in roofs, any thickness including plastering and leeping (whether full thickness removed or only a part thereof) complete all as specified and directed.

M&L for 40 mm thick PCC (1:2:4) type B-0 (Using 12.50 mm graded stone aggregate) as in roof padding complete all as specified and directed.

M&L for 15 mm thick plaster in cement mortar (1:4) mixed with water proofing compound on roof slabs finished even and smooth (without using extra cement) after cleaning of roof surfaces with wire brushes complete all as specified and directed Notes : WPC shall be measured and paid seperately.

M&L for water proofing treatment with APP (Atactic Polypropylene) modified polymeric prefabricated five layer membrane over roof consisting of cleaning of concrete or plaster surface of roof & parapet walls and applying evenly a bitumen primer confirming to IS 3488 @ 0.40 Kg per sqm laid using buten torch and sealing all joints of APP modified polymeric water proofing membrane minimum weight 3.6 kg/sqm reinforced with non woven polyester fabric (weight not less than 160 grams per sqm) unrolled and bonded to substrata with logitudinal and end laps 100 mm and 150 mm respectively as per manufacturer's instructions complete all as specified and directed.

Cutting grooves in brick wall, 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and directed.

M&L for providing plain cement concrete (1:2:4) type B0 (using 12.5 mm graded crushed stone aggregate) as in coping or roof kerbs on roof chamfered on edge including trowelling slightly complete all as specified and directed.

M&L for Cement concrete tiles 25cm x 25cm x 22 mm thick, machine pressed; set jointed and pointed in neat cement slurry in floors, and cut and polished, set with grey cement and pigments on roof complete all as specified

Removing bldgs demolished materials/debries exc 1.50 KM and dispose off the same outside MD land at contractors own expenses, complete all as specified and directed.

Demolition of Brickwork or stone/ boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc including removal debries from the site complete all as as specied and directed.

M&L for brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:6 etc complete all as specified and directed.

M&L for half brick work with sub class 'B' old size brick, straight or curved on plan exc 6.0 mtr mean radius built in cement mortar 1:4 etc complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:6) on brick work or concrete surfaces finished even and smooth (without using extra cement) complete all as specified and directed.

M&L for 15 mm thick plastering in two layers (10+5) mm in cement mortar (1:4) on brick or concrete surfaces including rendering on fins, fascias, chajja, parapets etc and finishing the surfaces even and fair (without using extra cement), top layer shall be with WPC as per manufacturer's instruction and complete all as specified. Note: WPC shall be measured and paid separately.

M&L for rendering 10mm thick in cement mortar (1:3) as in ceilings finished even and smooth (without using extra cement) complete all as specified and directed.

Supply only integral water proofing compound ISI Marked complete all as specified.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer, of approved manufacturer of required shade and colour complete as per manufacturer's specification and as specified and directed.

M&L for Complete removal of existing surfaces of wall by mechanised sander of Berger paints or equivalent makes viz Express sander machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre over a coat of primer , of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified.

M&L for preparation of newly plastered or unplastered/undecorated surface of ceiling and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M&L for complete removal of existing surfaces of ceiling by mechanised sander of Berger paints or equivalent makes viz Express sander machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying two or more coat distempering with 1st quality acrylic distemper (ready mixed) having VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour complete, as per manufacturer's specification complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for complete removal of existing surfaces of wall by mechanised sander of Berger paints or equivalent makes viz Express sander machine having suction vaccum bag or by manual scrapping tools where mechanical removal is not possible and applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm complete all as specified and directed.

M&L for providing 3mm thick wall care putty on wall before applying oil bound distemper and making the surface uniform complete all as specified and directed.

M&L for providing 3mm thick wall care putty on ceiling before applying oil bound distemper and making the surface uniform complete all as specified and directed.

M&L for preparation of newly plastered or unplastered/undecorated surface of wall and applying three coat of white wash complete all as specified and directed.

M&L for preparation of old decorated surface of walls by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with with suitable material like cement or plaster of paris etc and thereafter applying one coat of white wash on wall complete all as specified.

M&L for preparation of newly plastered or unplastered/undecorated surface of ceiling and applying three coat of white wash complete all as specified.

M&L for preparation of old decorated surface of ceiling by brooming down or steel wire brushing scrapping down smoke spot moulds moss and efflorescent salts and treating oily & greasy spots and filling of holes and cracks with suitable material like cement or plaster of paris etc and thereafter applying one coat of white wash on wall complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) not exc. 1.5 sqm each, including cutting holes for removing the hold fast etc ( The rate quoted shall be deemed to be included for making good disturbed surface of wall ) complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutter from frames) exc. 1.5 Sqm but n exc 4 Sqm each, including cutting holes for removing the hold fast etc( The rate quoted shall be deemed to be included for making good disturbed surface of wall) complete all as specified and directed.

S&F Pressed steel frames 125X60mm (made out of 1.25 mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified and directed.

S&F Pressed steel frames 105X60mm (made out of 1.25mm thick MS Sheet) for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete as specified and directed.

M&L for cement concrete (1:3:6) type C1 (using 20 mm graded stone aggregate) as in filling of door frames of pressed steel and in bed blocks etc complete all as specified and directed.

S&F factory made 35 mm thick flush shutters , solid core construction with block board core and plywood face pannel commercial type on both faces complete all as specified and directed.

S&F factory made 35mm thick 2nd class hardwood glazed and skelton door shutters, open rebated and prepared to receive glass, gauze, (without sash bars) edges for framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-1 section 8 clause 8.24 (a) fitted to chowkats complete all as specified and directed.

S&F solid PVC door frame of size 50 mm X47 mm made out of 5mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as per specification and drawing, complete all as specified and directed.

S&F factory made PVC shelter panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in MS frame welded/ sealed to the stiles and rails with suitable PVC sheet beading and joined together with solvent cement , supplying and fixing in the frame at site as per specification & drawing complete all as specified and directed.

S&F 100 mm Butt hinges, Stainless steel complete all as specified and directed.

S&F 200mm long aluminium anodised, barrel tower bolts of extruded section complete all as specified and directed.

S&F 150mm size extruded aluminium alloy handles,fabricated type anodised, complete all as specified and directed.

S&F 250 mm long aluminium alloy,anodised, sliding door bolts with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast sections or cast aluminium alloy complete all as specified and directed.

M&L for preparation of new or previously untreated wooden surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F powder coated aluminum frame for partition, doors, windows, ventilations with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F powder coated aluminium window and ventilator shutters, fixed/side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150mm long (1 no.). hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. Note: Sheet glass/ wire cloth to be measured and paid separately under relavant Item of Sch 'A'.

S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening,complete all as specified and directed.

S&F 5.0 mm thick sheet glass ordinary quality and glazing each pane n exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame work complete all as specified and directed.

S&F 5.0 mm thick frosted glass ordinary quality and glazing each pane n exc 0.50 Sqm fixed with neoprene rubber gasket in aluminium frame work complete all as specified and directed.

S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staple including necessary beading complete all as specified and directed.

Dismantling of boarding of any description, fixed in any position with nails complete all as specified and directed.

S&F 18 mm thick 100% solid WPC(wood Polymer Composite) plain board (minimum density 650 kg/Cum) fixed with screws, solvent cement/adhesive to make kitchen cabinet sides top and bottom and shelves inside the cabinets complete all as specified and directed. Note: Material Testing Certificate(MTC) and authentication of the product shall be mandatory by the manufacturing company.

S&F18 mm thick 100% solid WPC(wood Polymer Composite) board (minimum density 650 kg/Cum) of one side Prelam/Rigidlam and other side balancing laminate colour to make kitchen cabinet shutter/drawer front shutters complete all s specified and directed. Note: Material Testing Certificate(MTC) and authentication of the product shall be mandatory by the manufacturing company.

S&F 12 mm thick 100% solid WPC(wood Polymer Composite) plain board (minimum density 650 kg/Cum) fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all s specified and directed. Note: Material Testing Certificate(MTC) and authentication of the product shall be mandatory by the manufacturing company.

S&F 6 mm thick 100% solid WPC(wood Polymer Composite) plain board (minimum density 650 kg/Cum) fixed with screws, solvent cement/adhesive to make wall mount kitchen cabinet back and pull out drawer sides complete all s specified and directed. Note: Material Testing Certificate(MTC) and authentication of the product shall be mandatory by the manufacturing company.

S&F 20 mm wide & 1 mm thick PVC edge bending of PVC pasted on edges with suitable adhesive, complete as specified and directed.

S&F auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as specified and directed.

S&F Ball bearing runners 45 mm telescopic channel (20 inch) full extension load capacity 50 kgs complete all as specified and directed.

S&F stainless steel handles 100 mm size for kitchen cabinet/cupboard shutters complete all as specified and directed..

S&F chromium plated stainless steel of grade 304 wire basket (storage basket) pull out type for large utensils, size 558x500 mm with necessary fixing clips etc complete all as specified and directed. Note: Basket shall be heavy in weight and as approved by GE.

S&F chromium plated stainless steel of grade 304 wire basket (cup and saucer basket) pull out type size 558x300 mm with necessary fixing clips etc complete all as specified and directed. Note: Basket shall be heavy in weight and as approved by GE.

S&F chromium plated stainless steel of grade 304 wire basket (Jar basket) pull out type size 585x150 mm with necessary fixing clips etc complete as specified and directed. Note: Basket shall be heavy in weight and as approved by GE.

S&F chromium plated stainless steel of grade 304 wire basket (Thali basket) pull out type, size 380x500 mm with necessary fixing clips etc completeall as specified and directed. Note: Basket shall be heavy in weight and as approved by GE.

S&F chromium plated stainless steel of grade 304 wire basket (Cutlery basket) pull out type, size 380x500 mm with necessary fixing clips etc complete all as specified and directed. Note: Basket shall be heavy in weight and as approved by GE.

S&F chromium plated stainless steel of grade 304 wire basket (Grain Trolley) pull out type, size 380x500 mm with necessary sliding frame structure etc complete all as specified and directed. Note: Basket shall be heavy in weight and as approved by GE.

S&F chromium plated stainless steel of grade 304 wire basket (Storage/plain basket) pull out type, size 380x500 mm with necessary fixing clips etc complete all as specified and directed. Note: Basket shall be heavy in weight and as approved by GE.

S&F chromium plated stainless steel of grade 304 wire basket (Bottle pull out) pull out type , size 150 to 200 mm with necessary sliding frame structure etccomplete all as specified and directed. Note: Basket shall be heavy in weight and as approved by GE.

S&F 75 mm Butt hinges, Stainless steel complete all as specified and directed.

S&F 150 mm tower bolt, Stainless steel complete all as specified and directed.

Dismantling of cast iron pipe up to 100 mm dia, jointed in cement mortar and taking out in trenches/Wall if required etc complete all as specified and directed.

S&F 100 mm bore Cast iron soil, waste and vent pipes (sand cast pipes), in any length with or without ears with cement joints, laid in trenches or in floors complete all as specified and directed.

S&F 100 mm bore Cast iron soil, waste and vent pipes (sand cast pipes), in any length with or without ears with cement joints, fixed to wall complete all as specified and directed.

S&F 75 mm bore Cast iron soil, waste and vent pipes (sand cast pipes), in any length with or without ears with cement joints, fixed to wall complete all as specified and directed.

S&F in repair 100 mm bore (larger bore measured) cast iron Bends(any radius), diminishing pieces or tapers complete all as specified and directed.

S&F in repair 100 mm branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches) complete all as specified and directed.

S&F in repair 100mm bore Cast iron cowls complete all as specified and directed.

S&F in repair 75 mm bore(larger bore measured) cast iron Bends of (any radius), diminishing pieces or tapers complete all as specified and directed.

S&F in repair 75 mm branch pieces, single (equal or unequal),ordinary or inverted (spigot or socket type) or with parallel branches) complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber rings joints fixed to walls complete all as specified and directed.

S&F in repair 110 mm dia PVC (SWR) bends with rubber rings joints fixed as required complete all as specified.

S&F in repair 50mm bore PVC (SWR) pipes single socketed, in any length with rubber ring joints including bend, tee, laid in trenches, complete all as specified and directed.

S&F in repair 100 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair 75 mm dia Cast iron floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed.

S&F in repair Salt-glazed stoneware gully traps (150X150) mm, square or round mouthed, type 'P' complete all as specified and directed.

S&F in repair Salt-glazed stoneware gully traps (100X100) mm, square or round mouthed, type 'P' complete all as specified and directed.

Taking up or down steel tubing 15mm bore and connection including cleaning for refixing or removal to store complete all as specified and directed.

Taking up or down 20mm dia steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed.

Cutting chases, pinning in making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills,sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in brick wall etc complete all as specified and directed.

S&F 15mm bore medium grade galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors complete all as specified and directed.

S&F 20mm dia bore medium grade, galvanized steel tubing with all fittings & fixed complete to walls & ceiling or laid in floors (including in short length) complete all as specified and directed.

S&F in repair vitreous china squatting pan, white, orissa pattern, size 580x440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron ‘P’ trap incl lime concrete bedding and making good to the disturbed surface to match with the existing surface of floor complete all as specified and directed.

S&F in repair vitreous china wash hand basin (flat back) white of size 550x400mm with pedestal including one number chromium plated waste fittings, 32 mm dia, brass with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed, with & including 32 mm dia PVC waste pipe with connector, including cutting for and pinning in ends of brackets complete all as specified and directed.

S&F in repairs PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action type with inlet ball valve and float, handle with & including bracket and PVC flush pipe 32 mm bore complete all as specified and directed.

S&F in repair Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed.

S&F Soap dish of chromium plated or stainless steel fixed to wall with chromium plated brass screws complete all as specified and directed.

S&F in repair PVC connection 450 mm long suitable for 15 mm GI pipe with two brass nuts & rubber washers complete all as specified and directed.

S&F in repair brass CP mixer for mixing hot & cold water screwed down for iron pipe 15 mm dia and fixed complete all as specified and directed.

M&L for 15 mm dia stop valve/angle valve, cast copper alloy,fancy type, chromium plated screwed down high pressure with with crutch or butterfly handle, screwed both ends for iron pipe or for unions complete all as specified and directed.

S&F in repair bib taps, long body, brass, fancy type, chromium plated with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair chromium plated shower roses 125 mm size with or without swivel joints of standard size including fixing to 15mm steel pipe or union complete all as specified and directed.

S&F in repair sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe,overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm including one number chromium plated waste fittings 40 mm dia & waste pipe complete all as specified and as directed.

S&F in repair Double bowl sink (Pearl finish) made of 304 grade stainless steel kitchen sink with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall and connecting union to pipe,overall size 980 mm x 480 mm & bowl size 400X400X 230 mm (02 nos) mm including two number chromium plated waste fittings 40 mm dia & waste pipe complete all as specified and directed.

S&F Auto clean Wall Mount Baffle Filter T-Shapped electric Kitchen Chimney with the following specifications,complete all as specified and directed:- (a) Maximum Suction-1200 m3/Hr (b)Filter Type- Filterless Technology (c) Controls-Touch Control (d) Oil Collector cup- Yes (e) Lamp-2X1.5 W LED Lamp (f) Warranty- 1 year comprehensive 5 years on motor and Metallic Blower. (g) Size-90CM (h) Motion Sensor- Yes (j)Dimension(WXDXH)-490X495X905mm (k) Package inclusions-1 cooker hood, 1 user Manual/Fixture materials.

S&F in repair kitchen plate rack stainless steel 1 mm thick of size 60cmx75cm complete fixed to brick/concrete wall, with screw including rawl plug complete all as specified and directed

S&F in repair Brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.

S&F in repair Corner Glass Shelf of size 200mm with Bracket complete all specified and directed.

S&F in repair stainless steel toilet paper holder with flat recessed type complete all as specified and directed.

S&F chromium plated health faucet telephonic type with 8mm dia, 1 meter long CP flexible with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed.

Dismantling of existing water tanks of steel/PVC/AC of capacity exceeding 250 liters but not exceeding 500 litres complete all as specified and directed.

S&F rotational moulded polyethylene water storage tanks 500 ltrs capacity (cylinderical vertical with closed top) hoisted and fixed in position all as per SSR Part I complete all as specified and directed.

S&F in repair 20mm dia Gun metal gate valve with iron wheel head, screwed both ends for iron pipe complete all as specified and directed.

M&L for preparation of old painted surfaces of wood & wood based of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified.

M&L for preparation of old painted surfaces of steel of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for anti termite treatment of voids or holes in masonry using chemical emulsion one litre per hole, at 300mm intervals including drilling holes at 45 degree and replugging them with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floors complete all as specified and directed.

M&L for Providing and injecting chemical emulsion for Post Constructional Anti termite Treatment along external wall where the apron is not provided using chemical emulsion at the rate of 7.5 litres per sq.m of the vertical surface of the sub-structure to a depth of 300mm including excavating channel along the wall and rodding etc. complete all as specified and directed.

M&L for anti termite treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and directed.

S&F in repair 25 mm outer dia medium weight pipe made out of stainless steel 304 grade, including decorative ornamental knobs at both ends and one set of ornamental decorative Stainless steel clamps to fixed to walls complete all as specified.

S&F 15 mm outer dia stainless steel rod,1mm thick, with bracket for wardrobe including full threaded steel screws complete all as specified and directed.

S&F in repair 100 mm chromium plated grating, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description complete all as specified and directed.

S&F rolled mild steel in framed work as in doors or steel gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering,running rails and guides) and hanging; also fastening and fixing conforming to Fe- 290.Gde-E-165 complete all as specified and directed.

Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified & directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L for prepration of new Steel surfaces of any description, not otherwise described, over 10cm width or girth & applying two coats of synthetic enamel paint over a coat of primer complete all as specified

S&F in repair vitreous china premium/ 1st quality EWC one piece(Square design) white/ ivory/off white (closed pattern incl all necessary accessories like rag bolts/ gel gasket etc.and High or low level fluslhing cistern of 10 ltres and connections to pipes and fixing of chain and pull, or lever, if any & flush pipe complete as specified and directed.

M&L for 75 mm thick cement concrete (1:4:8) type D-2 (using 40 mm graded stone aggregates) as in sub base of flooring etc complete all as specified and directed.

M&Lfor Chequered cement concrete tiles 20cm x 20cm x 25mm thick,set, jointed and pointed in neat cement slurry in floor with grey cement and pigment to match complete all as specified and directed.

Taking down carefully copper/aluminium point wiring (light, Fan, Socket or power) including fixture and fittings such as switches, ceiling roses, pendents, regulators, sockets etc complete removing material to store for keeping in safe custody for reuse or taking in schedule of credit and making good disturbed surfaces of walls, floors etc all ascomplete all as specified and directed.

Dismantling and taking down of fluorescent tube light single/double of any wattage or size street light fittings for repair or replacement of burnt/worn out accessories or carrying to MES store for reuse or taking in schedule of credit (Accessories or components to be provided free for replacement by department) complete all as specified and directed.

Taking down unserviceable sub main wiring of any type/size including wires, conduits/battens etc complete all as specified and directed.

Taking down fan regulator, sealing cable ends and removing regulator to store complete all as specified and directed.

Taking down unserviceable / serviciable MCB DB's/AC's box to deposit in store for keeping in safe custody for reuse or taking in schedule of credit of any size/rating complete all as specified and directed.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm drawn through in and including concealed PVC conduit size of not less than 20mm concealed in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover for mounting modular switch, socket and regulator along with earth wire of PVC insulated, unsheathed, 1100 V grade cable multi stranded copper conductor of size 1.5 sqmm and making good disturbed surface as it is for one light point controlled by one, one way switch complete all as specified and directed. Note :- (i) Cost of cutting chases wherever required on site is deemed to be included in quoted rate. (ii)Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green

All as per Item No. 160 here in before but for One ceiling fan/Exhaust fan point controlled by one, one way switch complete all as specified and directed.

All as per Item No. 160 here in before but for One call bell point controlled by one, one way switch complete all as specified and directed..

All as per Item No. 160 here in before but for one light point controlled by 2, 2 way switch complete all as specified and directed.

All as per Item No. 160 here in before but for 3 Pin 5 Amp Socket outlet on the same board,complete all as specified and directed.

All as per Item No. 160 here in before but for 3 Pin 5 Amp Socket outlet on independent board , complete all as specified and directed.

M&L for point wiring with two runs of FRLS PVC insulated unsheathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm drawn through in and including concealed PVC conduit size of not less than 25mm concealed in wall / surface including provn of pressed steel terminal box of suitable size with 3mm thick plastic laminated sheet cover/modular white cover plate with frame and modular metal flush box of required module at site for mounting modular switch, socket and fan regulator along with earth wire of PVC insulated, unseathed, 1100 V grade cable multi stranded copper conductor of size 2.5 sqmm and for one 5 pin socket outlet two in one 16/6 amps on an independent board including colour coding of cable shall be Phase- Red, Neutral- Black and Earth- Green and making good, disturb surface as it is complete all as specified and directed.

M&L for sub main wiring with two single core 2.5 sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 2.5 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed .

Note :- (i) Cost of cutting chases wherever required on site is deemed to be included in quoted rate. (ii)Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green (iii) 3X2.5Sqmm cable alongwith PVC conduit shall be measured as one

M&L for sub main wiring with two single core 4 sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 4 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

Note :- (i) Cost of cutting chases wherever required on site is deemed to be included in quoted rate. (ii)Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green (iii) 3X4.00 Sqmm cable alongwith PVC conduit shall be measured as one unit.

M&Lfor sub main wiring with two single core 6 sqmm stranded copper conductor PVC insulated and unsheathed cable ISI marked in 25 mm dia, medium grade, PVC conduit concealed in wall for sub main connection including 6 Sqmm PVC insulated unsheathed copper conductor ISI marked as earth wire complete all as specified and directed by Engr-in-charge.

Note :- (i) Cost of cutting chases wherever required on site is deemed to be included in quoted rate. (ii)Colour coding of cable should be Phase- Red, Neutral- Black and Earth- Green (iii) 3X6.00 Sqmm cable alongwith PVC conduit shall be measured as one unit.

S&F Modular socket out let, 3 pin 06 Amps,flush type, 230 volts complete all as specified and directed.

S&F Modular socket out let, 3 pin 6/16 Amps, 2 in 1, flush type, 230 volts complete all as specified and directed.

S&F Modular switch piano flush type, single pole, one way 5 Amps 240 volts complete all as specified and directed.

S&F Modular switch piano flush type single pole, one way, 15 Amps 240 volts complete all as specified and directed.

S&F Modular switch piano type single pole, 2 way, 15 amps 240 volts complete all as specified and directed.

S&F Modular bell push flush type, single pole, one way 5 Amps 240 volts complete all as specified and directed.

S&F bell electric heavy duty Ding Dong type single pole 230 volts complete all as specified as directed

S&F Modula fan regulator stepped type, electronic 100 watt rating, 230 volts complete all as specified and directed.

S&F ceiling rose, surface bakelite, size as per relevant IS, three terminals complete all as specified and directed

Refixing of ceiling rose, surface bakelite, size as per relevant IS, three terminals complete all as specified and directed

S&F sheet metal enclosure single pole and neutral two pin and earth plug and socket complete with one double pole MCB SP 20 Amps for geyser/AC complete all as specified and directed.

S&F MCB DB sheet metal enclosure single pole and neutral 240V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 43 without MCB and with enclosure blank plates for unused way suitable for 12 way complete all as specified and directed :

All as per item No 184 here in before but for 8 way, complete all as specified and as directed.

All as per item No. 184 here in before but for 4 way, complete all as specified and as directed.

All as per item No. 184 here in before but for 2 way, complete all as specified and directed.

S&F MCB DB sheet metal enclosure Vertical Triple pole and neutral 415V with 200 Amp suitable size plate and common neutral link all enclosed in standard steel sheet flush mounting type factory fabricated Acrylic double door complete confirming to IP 43 without MCB and with enclosure blank plates for unused way suitable for 06 way complete all as specified and directed

S&F MCB, single pole & neutral, 240 Volts ( 40-63) Amps,10KA, 'B' series complete all as specified and directed.

Refixing of MCB, single pole & neutral, 240 Volts ( 40-63) Amps,10KA, 'B' series complete all as specified and directed.

S&F MCB, single pole, 240 Volts (05 to 32) Amps,10KA, 'B' series complete all as specified and directed.

Refixing of MCB, single pole, 240 Volts (05 to 32) Amps,10KA, 'B' series complete all as specified and directed.

S&F MCCB, Three pole & neutral, 415 Volts 125 Amps, 16KA complete all as specified and directed .

Supply and fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Re-fixing LED lights fitting 1x 22W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

S&F LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

Re-fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed

S&F LED bldg light fitting 35/36 Watt, having uniformty ratio 0.25 , high pressure die cast aluminium housing , heat resistant toughened glass frame , IP-65 protection complete with lamp & connected items and connection with suitable cable from celing rose to light fitting and fixing on GI pipe bracket made out of suitable dia GI pipe medium grade 1.2 m long bend to shape and fixed on wall with flat iron clamps nut, bolts washers etc complete all as specified and directed.

Supply and fixing post top lantern LED type 20 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete including provision of GI pipe medium grade 40mm for grouting of fittings and PVC copper cable multi stranded 2.5 Sqmm from SPN BD/ street light pole to fittings etc complete all as specified and as directed.

Taking down ceiling fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Taking down of Exhaust fan, sealing cable end, dismantling blades and removing fan and blades to store complete all as specified and directed.

Re-fixing ceiling fan and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Re-fixing of exhaust fan and connecting up including provision of cable from ceiling rose/connector to fan complete all as specified and directed.

S&F exhaust fan, steel body AC single Phase, 230V of size 300mm sweep with blades,frame and louvers Complete all as specified and directed

M&L for earthing complete with galvanized mild steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit not less than 2.25 Mtr below ground level) with top edge of earth plate not less than 1.5 Mtrs below ground level connected to GI wire 4 mm Dia as earth lead by means of nuts, bolts, thimbles, chuck nuts, washers of GI or steel, including PCC (concrete chamber) shall be PCC 1:3:6 type C-1 using 20mm graded stone aggregate, with fair finish internal surface of concrete chamber shall be given 15mm thick plaster in CM 1:4, funnel with wire gauge mesh, 80 mm thick RCC pit cover 320 mm x 320 mm of RCC 1:2:4 type B-1 using 20 mm graded stone aggregate reinforced with XPM, JALLI and charcoal dust and common salt all as shown in electrical plate No 3 of MES SSR Part-I (2009) and specified including provision of 20 mm dia medium grade pipe for watering and light grade 20 mm dia for protection and including all excavation and earth work & connecting the earthing to an earthing test point complete all as specified and directed .

M&L for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles or any other indicated situation for loop earthing etc. as required 4 Sqmm galvanised iron or steel wire complete all as specified and directed

Taking down existing deteriorated meter box, Supply and fix Meter box with transparent glass sutable for accomodating 4 No of single phase energy meter Kiosk type 230 Volts, 50 Hz , grouting with wall , factory assembled, indoor type weather and vermin proof (Protection Class IP-67) made out of 3.15 mm thick MS Sheet CRCA sheet with front hinged opening, rubber lining, locking arrangement ,powder coated externally and internally after seven tanks treatment, fully compartmentalized design complete all as specified and directed.

M&L for cutting opening through brick wall 230mm thick built in cement mortar suitable for exhaust fan 300mm sweep including making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4, type B1 as required complete all as specified and directed.

Note: Schedule of Credit of Rs. 4,75,575.00 will be deducted from total quoted amount while calculating Contract sum.

MODERN CONSTRUCTION CO

Adhunik Builders

A R construction

V r traders

M/s KUMAR BUILDERS

imran construction company