Construction of Stores and Shelter Sheds for Port Railway Division

Amount

Initial Load test for pile including kenteledge of required load and supply of all testing equipments including construction of test pile cap and dismantling of the same after completion of test and submitting the test report as per IS-2911(Part-IV) with supply of all labour, materials, taxes, tollage, royalties, transportation, T&P etc. all complete as per direction of Engineer-in-Charge.(Excluding GST).

Providing single under reamed bored compaction pile foundation of following dia & length long with reinforced cement concrete of M-20 grade using 12mm size black hard granite (C.B) stone chips, boring from existing ground level with removal of obstruction if any, using bentonite,providing required reinforcement as per drawing making the end of the cage to Conical shape, welded properly, providing 750mmdia under ream at appropriate level and disposal the boring earth from work site with supply of all labour, T&P, taxes, Port enry fees, hire & running charges of all machineries reuqired for the work etc. all complete excluding GST and as per direction of Engineer in charge (excluding cost of reinforcement steel and binding wire). (300mm dia pile of 9.00 mtr length)

Cutting of pile heads upto 0.3m from cutoff level and disposing the debrises clear out of the work site with supply of all labour,T&P etc. complete as per direction of Engineer-in-Charge.

Routine Load test for working pile including kenteledge of required load and supply of all testing equipments including construction of test pile cap and dismantling of the same after completion of test and submitting the test report as per IS-2911(Part-IV) with supply of all labour, materials, taxes, tollage, royalties, transportation, T&P etc. all complete as per direction of Engineer-in-Charge.(Excluding GST)

Earth work in all kind of soil with initial lead and lift including rough dressing in layers not exceeding 0.3m in depth and the Earth transported by transport vehicles as directed by the Engineer-in-charge. ( Excluding Cost of GST)

Filling in foundation and plinth with filling sand(saline) including watering and ramming but excluding cost of GST as directed by the Engineer-in-charge

P.C.C(1:3:6) of using 20 mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hosting, laying to proper level & slope compacting, curing, watering charges etc. complete including cost & supply of all materials, labour, T&P, taxes, etc. complete but excluding cost of GST as directed by Engineer-in-charge

C.C. M20 for R.C.C. works using 20mm and 10 mm size C.B.G. chips for all floors, foundation & plinth etc. of approved quality, mixing as per approved design mix, hoisting, laying, compacting with40 to 60 neddle vibrator, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties,etc. all complete but Excluding GST as directed by Engineer-in-charge.

Supply Tor/TMT steel manufactured by SAIL/TISCON/VIGAC Steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works binding the grills with binding wire of 18 to 20 gauge including supply of steel, labour, materials, transportation charges, T&P, taxes, etc. all complete but excluding GST as per the direction of Engineer-in-charge. (NB: No payment shall be made for extra weight than theoretical co-efficient).

Brick work in Fly Ash Bricks of size 25cm x 12cm x 8cm having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² with C.M (1:6) including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. all complete but excluding cost of GST as per direction of Engineer-in-charge.

For Foundation and footing

For Superstructure

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank of approved quality for R.C.C. structures and deshuttering and removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc. all complete but excluding GST as directed by Engineer-in-charge.

For foundation and plingth

For Coloumn, Beam for store at Bauriapalanda YM office/Indira Park

Lintel/Chhajja/RoofSlab for store at Bauriapalanda YM Office/Indira Park

12 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge.

16 MM thick Cement plaster with cement mortar (1:6) proportion, over brick work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge.

Close deep chipping and cleaning to R.C.C. surface for receiving cement plaster for roof plasterig and column plastering excluding GST as directed by Engineer-in-charge.

6 MM thick Cement plaster with cement mortar (1:4) proportion, over RCC work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, tollage, royalties, etc. complete but excluding cost of GST as per direction of Engineer-in-charge. (Qty Same as Item No.14)

Wall painting two coats with 100% Acrylic emulsion paint (1st quality) exterior grade of approved make & shade to make an even finished surface over a coat of primer with water bond cement primer in all heights with all scaffolding and staging charges including cost and supply of all materials, labour, T&P, all taxes, transportation charges etc. complete but excluding cost of GST as per direction of Engineer-in-charge.

Supplying fitting fixing of 6.5mm to 6.7mm thick ceramic wall tiles ( premimum Quality 200 x300 mm or 300 x450 mm size) or any other approved size as approved by EIC in floors, treads or steps and landing on 12mm thick bed of cement mortar 1:3(1cement: 3 sand) jointed with neat cement slury mixed with pigment to match the shades of the tiles including rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Supplying fitting fixing of Vitrified floor tiles ( premimum Quality 600 x600 mm size)in floors, treads or steps and landing with applicattion of polymere modified quick set cement based water resistant adhesive conforming to IS:15477 of 3mm thicked and filling joints with white cement of approved quality with rubbing and cleaning complete including supply of all labour material taxes tollage etc all complete but excluding GST as per direction of Engineer in charge.

Supplying of Unskilled Labour for cleaning of site and shifting of railway materials etc. all complete as per direction of Engineer-in-Charge. (Excluding GST)

Painting and writing of figures and letters in different size upto 120 mm height with Supply of all labour, materials, T&P, taxes, etc. complete as directed by Engineer in charge.

Supplying fitting, fixing fully glazed aluminum framed open able windows using15 micron anodized OEL aluminum section 2082 as out section, 9139 as mullion section, 4124 as a shutter section frame with tapered clip of section 4125, aluminum angle , rubber beading, friction stay and handle etc. with 5mm black glass. including locking arrangement including all fitting including cost of materials all taxes labour, T&P etc. complete as per direction of Engineer-in-charge (Excluding GST).

40mm. (av) thick graded cement concrete in C.C.(1:2:2) using 12mm. to 6mm. size hard granite chips of approved quality including cleaning the roof top, washing, mixing, hoisting laying to proper level slope, gradient making rounding hunching at the corners, joints, finished smooth to exposed surface over 2 coats of WPC as water proofing course with cost and supply of all materials, labour, T&P, taxes, tollage transportations, curing, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge. (New work)

Supplying, fitting and fixing of M.S. grill gate with cost, conveyance, taxes of all materials, labour, T&P etc. required for the complete in all respect as directed by Engineer-in-charge (Excluding GST)

Supplying, fitting & fixing of precoated Galvolume metal sheet or its equivalent of 1000 mm width with total coated thickness of 0.5mm. for roof approved quality, drilling hole fixing of wind tie and ridges or valley including supply of all EPDM screw, ridge pieces, eve board, wind ties, cutting the sheet to proper profile with supply of all materials, labour, transportation, loading and unloading at both ends, T&P, etc. all complete as per the direction of Engineer-in-charge (Excluding cost of GST).

Supplying of GI Pipe heavy quality conforming to IS-1239, part -1 (2004) including fabricating,fitting and fixing… etc. all complete as per direction of Engineer-in-Charge.

65mm dia (Vertifical)

50mm dia for Truss & Purlin

Providing and laying factory made chamfered edged cement concrete paver blocks in footpath, park lawn, drive way or light traffic parking etc. M30 strength and 80 mm thick ,made by table vibratory method using PU mould , laid in required colour & parten over 50 mm thick compacted bed of sand , compacting and proper embedding /laying of inter locking paver blocks into the sand bedding layer throught vibratory compaction by using plate vibrator, filling the joints with sand and cutting the paver blocks as per required size and partern, sweeping the surface etc all complete with supply of material, labour , t&P taxes tollage etc all complete but excluding GST as directed by EIC

Supplying,fitting,fixing of following PH items with supply of all labour,materail,cutting of groove in brick/concrete wall/floor/roof/beam/column,earth work excavation,cutting of pipes as per required length,UPVC Paste,T&P, taxes etc. all complete as per direction of Engineer-in-Charge.

50mm dia UPVC pipe SCH 80

40mm dia UPVC pipe SCH 80

20mm dia UPVC pipe SCH 80

25mm dia UPVC pipe SCH 80

Sintex Tank 2000 ltr

50 mm dia UPVC Ball Valve SCH 80

40 mm dia UPVC Ball Valve SCH 80

25 mm dia UPVC Ball Valve SCH 80

UPVC FITTINGS SCH-80 AS PER ASTM D 2467 (MTA - MALE THREAD ADAPTOR - PVC) 50 mm dia

UPVC MTA 40 mm dia

UPVC MTA 25 mm dia

UPVC MTA 20 mm dia

UPVC FTA 50 mm dia

UPVC FTA 40 mm dia

UPVC FTA 25 mm dia

UPVC FTA 20 mm dia

UPVC FITTINGS SCH-80 AS PER ASTM D 2467 (90 DEGREE ELBOW) 50mm dia Elbow

UPVC Elbow 40 mm dia

UPVC Elbow 25 mm dia

UPVC Elbow 20 mm dia

UPVC FITTINGS SCH-80 AS PER ASTM D 2467 (TEE) 40 mm dia

UPVC Tee 25 mm dia

UPVC Tee 20 mm dia

UPVC FITTINGS SCH-80 AS PER ASTM D 2467 (UNION) 50 mm dia

UPVC Union 40 mm dia

UPVC Union 25 mm dia

UPVC Union 20 mm dia

110MM DIA SWR PIPE

110 MM DIA PVC PTRAP

110 MM DIA PVC BEND

110 MM DIA PVC DOOR BEND

110 MM DIA PVC SOCKET

110 MM DIA PVC VENT COWL

porcelain EWC with p-trap WITH COVER

Cistern 10Lr Cpacity

Porcelain flat back standing urinal (380x580x350)

Porcelain squatting urinal (600x355)

15mm Connection Pipe

15mm dia CP long body Bibcock

15mm dia CP Pillarcock

15mm dia CP Angular Stopcock

porcelain 22"x16" wash hand basin

32 mm CP waste

32 mm PVC waste Pipe

C.I basin bracket in pair

CP Grating

CP Extension piece -2”

Fixing 600mm x 450mm bevelled edge mirror of superior glass mounted on 6mm thick A.C sheet or plywood sheet and fixed to wooden plugs with chromium plated brass

6mm cement plaster 1:3 (1 cement:3 fine sand) finished with a floating coat of neat cement and thick coast of Lime wash on top of walls, when dry for bearing of RCC slabs and beams as dirercted by Engineer-in-Charge (Excluding GST)

Engagement of the following machineries for cleaning the site and shifting the railway materials including T&P, taxes etc. all complete as per direction of Engineer-in-Charge.(Excludig GST)

Engagement of Hydra

Engagement of JCB

Engagement of Tracator

Hydraulic Braker

Painting two coats with approved quality & shade enamel paint on new iron work over one coat of red oxide primer including scraping, cleaning, the old paint surface sand papering, filling the holes with wax putty etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. all complete but excluding cost of GST as per direction of Engineer-in-charge.

Shoring and shuttering for foundation trenches, pits etc. with supply of 38 mm thick non sal planks for poling boards and 10 mm thick non sal planks for walling and 125 mm dia non sal bullah for struting including putting close the wooden planks sheets for protection of excaveted earth pit with supply of all labour materials T&P, taxes, tollage, royalities etc all complete but excluding cost of GST as directed by EIC .

Up to 1.5 Mtr.

Beyond 1.5 Mtr.

Engagement of 5HP Diesel Pump sets and placing those pumps at required locations inside prohibited area for dewatering of stagnated water by pumping including fuel and consumable, providing required length of suction and delivery pipes with supply of all labour, T&P, engagment, hire & running charges of Pump, transportation charges, tollage, Operator cost, Port entry fee with barricading the same area if required etc. including all taxes excluding G.S.T all complete as directed by Engineer-in-charge. (No idle charges will be paid. Pumps will be engaged as and when required).

Supplying, fitting, fixing of factory made single leaf rigid F.R.P composite door shutter of 32 mm thick, laminated with to G.R.P skins with wood grain finished, fabricated using UV stabilized Isopthalic gal coat and one layer of 450 gsm E-glass Chopped Strand Mat (CSM) impregnated with orthopathalic, polyster resin including fitting of all fixtures like hinges, tower bolt, handle, aldrop etc. with cost, conveyance and taxes of all materials and labour etc. complete as directed by Engineer-in-Charge (Excluding cost of GST)

Supplying, fitting & fixing of F.R.P door frame of size 75mm x 100 mm including drilling holes in masonry wall with cost of all materials, rawl plug, screws, taxes and cost of all labour, etc. Complete as directed by Engineer-in-charge (Excluding cost of GST)

Dismantling cement concrete including stacking the useful materials for reuse and removing the debris within 50m with supply of all labour, T&P, staging, scaffolding, etc. complete cleaning the debrises with all taxes, including leads & lifts transportation & disposing at specified place and as per direction of Engineer-in-charge (Including GST).

Supplying, fitting, fixing Sal wood frame choukaths for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required nos. of W.I. clamps of size 25cm to 30cm long, 35mm wide, 2mm to 3 mm thick in C.C(1:3:6) including cutting grooves in choukaths, jointing with adhesive solution fixing to proper position etc. all complete including cost and supply of all materials, labour, T&P, all taxes, transportation, staging, scaffolding etc. complete as directed by the Engineer-in-charge.

32mm thick flush door shutter made out of 32mm B.W.R. block board and with 1mm thick sunmica to both side pasted with adhesive including fixing fixtures like Godrej make Mortice Lock , Godrej make Door closure having 100mm Aluminum heavy hinges with cutting grooves in chaukaths mending good the damages etc. all complete including cost of all materials, labour, T&P, taxes, all transportation, staging, scaffolding, etc. complete & as per direction of the Engineer-in-charge.(Excluding GST)

Providing fitting, fixing of Al. door with anodized Al. door section No. 9202 as vertical member, 9201 as top member and 9200 as bottom and middle member and size of the aluminium section is 125 mm x 37 mm x 1.50 mm and 12mm thick pre-laminated board on bottom & 6 mm plain glass on top fixed door frame by means of tapered clip No. 4660 and the frame to be completed by means of jointing angle No. 1855 including providing rubber beading, aluminum U channels, angle, clips, required nos. of handles, tower bolts, hooks, mortise lock & hydraulic door stopper as per relevant I.S. specification, etc. all finished including cost & supply of all materials, labour, T&P, taxes, transportation charges, staging, scaffolding, etc. complete and as per direction of Engineer-in-charge (Excluding GST)

PART-B :

Supply and execution of following electrical items including fitting,fixing etc.all complete as per direction of Engineer-in-Charge.(Excluding GST FROM Sl.No.41 to 88)

Supply of 4'x 20Watt batten type twin LED light fittings complete with inbuilt LED Lamps

Supply of 1400 mm sweep Ceiling Fan.

Supply of 120 Watt LED Flood light

Supply of 300mm sweep Exhaust Fan

Supply of wall mounted distribution board having 01 No 125A,4 pole of MCCB as in comer and 4 Nos. 32A DP MCB as outgoing with bus bar and indicator

Sypply of 4Cx 25 sqmm, 1.1KV grade GI armoured XLPE insulated stranded aluminium conductor cable copper communication cable

Supply of 1.5 Ton Split AC with copper tubes for both indoor & outdoor units.

Supply of 63 Amp. 4 Pole MCCB with encloser box.

Supply of 32 Amp 4 Pole MCCB with encloser box.

Supply and wiring to 6 Amp Plug point with provision of switch & socket along with board & plate.

Supply and wiring to 16 Amp Plug point with provision of switch & socket along with board & plate.

Fixing of LED light fittings

Wiring to LED Light point with 6/10 Amp switch and copper wire alongwith ceiling

Fixing of Ceiling Fan

Wiring to Ceiling fan point with 6 Amp. Flush type switch,regulator,Ceiling Rose,board & plate.

Fixing of Exhaust Fan

Wiring to Exhaust Fan points with 6/10 Amp. Flush type switch alongwith board & plate.

Fixing of 120 Watt LED flood light fitting

Wiring to 120 Watt LED flood light with 3 core x 1.5 sq.mm copper flexible cable.

Installation of wall mounted distribution board having 01 No 125A, 4 pole MCCB as incomer and 4 Nos. 32A DP MCB as outgoing with bus bar and indicator

Supply and wiring of 6 way BDB having 06 Nos. 6 Amp. MCB

Making of Kutcha cable trench of size 750mm depth x 300 mm width in hard soil for laying of 4C x 25 sq.mm cable alongwith dressing and levelling.

Laying of 4C x 25 sq mm, 1.1 KV grade G.I armoured XLPE insulated stranded aluminium conductor cable.

Execution of Earthing as per IE rule and necessary connections with 50 mm G.I flat to the earth points.

Wiring to A.C point with 4 sq.mm copper wire along with earth wire,supply & fixing of 32 Amp. DP MCB & 16 Amp. Socket with plug top.

Supply & wiring to 06 way BDB having 6/10/20 Amp. Single Pole MCBs & 20 Amp. Double pole MCB as per the scope of the work.

Making of Kutcha cable trench of size 750 mm Depth x 300 mm Width in hard soil for laying of 4 C X 25 Sq.mm cable and 3.5 C X 185 Sq.mm cable with dressing and levelling.

Laying /retrive of 3.5 C x 185 sq.mm, 1.1KV grade G.I armoured XLPE insulated stranded aluminium conductor cable.

Excution of Earthing as per IE rule.

Wiring to Light points as per scope of work.

Wiring to Ceiling fan points as per scope of work.

Wiring to 5/6 Ampere socket points as per scope of work.

Wiring to 15/16 Ampere Socket points as per scope of work.

Wiring to Call bell points as per scope of work.

Wiring to 4-way BDB points having 01 no. 10A SP MCB & 01 no. 20A SP MCB as per scope of work.

Supply & installation of 1400mm sweep ceiling fan as per scope of work.

Supply & installation of 300 mm sweep Exhaust fan as per scope of work.

Supply & installation of 1' X 1' surface mounted, 24 Watt LED down light as per scope of work.

Supply & installation of 1' X 1' surface mounted, 15 Watt LED down light as per scope of work.

Supply & installation of call bell as per scope of work.

Supply & installation of 90 watt LED street light fittings as per scope of work.

Supply,installation ,testing & commissioning of 125A out door plinth mounted double door Distribution panel having 4P 125 A MCCB as Main incoming and 4 nos.4 Pole 63 A MCB & 4 nos. 2 Pole 63 A MCB as out going as per scope of work.

Supply of 4C X 25 sq.mm. aluminium round armoured XLPE cable.

Making of kutchha cable trench of size 300 MM.(width) X 900 MM.(depth) & laying of 3½C / 4C X 25 sq.mm. aluminium round armoured XLPE cable inside the cable trench & refill the cable trench with excavated soil.

Execution of 20' chemical earthing system as per IE Rule including supply of all required materials.

Supply,installation ,testing & commissioning of 32A,DP MCB AS MAIN Switch as per scope of work.

Supply of 120 Watt LED flood light fitting complete with inbuilt LED lamp.

Supply of 20 Watt batten type LED light fitting complete with inbuilt LED lamp.

BIKRAM KESHARI ROUTARAY

SUSANTA KUMAR SWAIN

Aakar Engineers and Contractors

Nxtgear Services Private Limited

Bidder Name

Nxtgear Services Private Limited