REPAIR/ REPLACEMENT OF REWINDING OF MONOBLOCK PUMPS/ SUBMERSIBLE PUMPS AND CERTAIN MISC WORKS AT AIR FORCE STATION UDHAMPUR

Amount

Dismantling / taking out of submersible pump or motor 15 HP to 20 HP 3 phase, 415 volts, 50 HZ, AC from the borewell to contractor's work shop, dismantling for carrying out necessary repairs / renewal of parts of motors or pump and reassembling complete motors/pump sets & depositing the same after necessary repair to site complete all as specified and as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete complete all as specified and as directed.

All as per item No 1.00 above, M&L for cutting out the burnt existing winding of startor of submersible motor of any make and rewinding with the same size of, copper winding wire, etc as per existing complete all as specified and as directed.

Straightening only of the slots of stator of submersible motor complete all as specified and as directed.

Supply only thrust of ball bearing block complete for submersible motor complete all as specified and as directed.

Renewal only of worn out gun metal bushes for submersible motor as per manufacturer's design complete all as specified and as directed.

Supply and fixing in repairs PVC sheathed and PVC insulated, flat, copper conductor submersible cable 3 core of 10 sqmm size, 8 mtr long complete with suitable clips complete all as specified and as directed.

Supply only sand guard of submersible motor complete all as specified and as directed.

Supply only sleeves of end plates of submersible motor complete all as specified and as directed.

Supply only cable grommet (guard) complete all as specified and as directed.

Supply only water seal complete all as specified and as directed.

Re-metaling of PUMP shaft, turning to bring it to original size and shape and polishing of shaft of submersible pump complete all as specified and as directed.

Supply & fixing coupling of submersible motor and pump with key complete all as specified and as directed.

S & F in repair of broken PUMP shaft with new piece, making key slot, grinding to make coupling size, and balancing the rotor complete all as specified and as directed.

Supply only GI column pipe 80mm bore medium grade 3/6 RM long with flange, gasket nut, bolts and washers etc complete all as specified and as directed

Complete overhauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, rethreading of wornout studs holes and provding over size studs with nuts complete all as specified and directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after.

Supply only bowl bushes complete all as specified and as directed.

Supply only neck ring complete all as specified and as directed.

Supply only steel distance pieces & key complete all as specified and as directed.

Supply only impellor gun metal as per existing complete all as specified and as directed.

Supply only cast iron, bowl complete all as specified and as directed.

Supply only CI, non return valve of required dia complete all as specified and as directed.

Supply only Head Extention (cast iron)complete complete all as specified and as directed.

Supply only of Wedges of slots complete all as specified and as directed.

Jointing of 3 core cable of any size by using puncture/ rubber compound roll & tape / Sealing compound complete all as specified and as directed.

Dismantling/ taking out of complete removal of old painted surfaces of motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and as directed. Note:- Painting shall be done by spray machine.

Dismantling / taking out of submersible pump or motor 5 HP to 7.5 HP 3 phase, 415 volts, 50HZ, AC from the bore well to contractor's work shop, dismantling for carrying out necessary repairs / renewal of parts of motors or pump and reassembling complete motors / pump sets & depositing the same after necessary repair to site complete all as specified and as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, taking up & down overhauling and replacement of spares complete.

M&L for cutting out the burnt existing winding of submersible motor of any make and rewinding with the same size copper winding wire, etc as per existing complete all as specified and as directed.

Straightening of the slots of stator in repair of submersible motor complete all as specified and as directed.

Supply only thrust ball bearing block as per existing size complete for submersible motor complete all as specified and as directed.

Renewal worn out gun metal bushes for submersible motor as per manufacturer's design and specification complete all as specified and as directed.

Supplty & fixed PVC sheathed and PVC insulated, flat, copper conductor submersible cable 3 core of 6 sqmm size, 8 mtr long complete with suitable clips complete all as specified and as directed.

Supply only sand guard of submersible motor complete all as specified and as directed.

Supply only sleeves of end plates of submersible motor complete all as specified and as directed.

Supply only cable grommet (guard) complete all as specified and as directed.

Supply only water seal complete all as specified and as directed.

Supply only studs with nuts of required length & dia complete all as specified and as directed.

Re-metaling of pump shaft, turning to bring it to original size and shape and polishing of shaft of submersible motor complete all as specified and as directed.

Supply only coupling of submersible & pump with key motor complete all as specified and as directed.

Supply only GI coloum pipe 50mm bore medium grade 3 / 6 RM long with flange, gasket nut bolts and washers etc complete all as specified and as directed.

Complete over hauling of submersible pump by carrying out, balancing of pump shaft and cutting of key slots, repairs to bowl assembly, rethreading of wornout studs holes and provding over size studs with nuts complete all as specified and directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after.

Supply only bowl bushes complete all as specified and as directed.

Supply only neck ring complete all as specified and as directed.

Supply only steel distance pieces & key complete all as specified and as directed.

Supply only impellor gun metal as per existing complete all as specified and as directed.

Supply only cast iron bowl assembly complete all as specified and as directed.

Supply only CI non return valve of required dia complete all as specified and as directed.

Supply only Head Extention (cast iron) complete all as specified and as directed.

Supply only of Wedges of slots complete all as specified and as directed.

Jointing of 3 core cable of any size by using puncture/ rubber compound roll & tape / Sealing compound complete all as specified and as directed.

Dismantling / taking out of Complete removal of old painted surfaces of motor and pump set and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and as directed. Note;- Painting shall be done by spray machine.

Dismantling / taking out of Centrifugal pump set - 30HP to 40HP, AC, 3 phase, 415 V AC from pump house at any location / Yard transporting to contractor's work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site complete all as specified and as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Cutting out the existing winding of the motor, opening of winding, re winding of motor with same size of winding wire as existing including varnishing, drying and making connection complete all as specified and as directed.

Repairing of pump by rethreading of worn out studs holes and S&F over size studs with nut and washer complete all as specified and as directed.

Supply only driven end bearing of pump shaft complete all as specified and as directed.

Supply only gun metal / stainless steel bush of pump shaft complete all as specified and as directed.

Balancing and repairing of pump shaft complete all as specified and as directed.

Supply only non driven end bearing of pump shaft complete all as specified and as directed.

Supply only of gland and packing complete all as specified and as directed.

Supply only cooling fan complete all as specified and as directed.

Supply only cooling fan cover complete all as specified and as directed.

Supply only CI impeller of similar make complete all as specified and as directed.

Supply only connection pipe complete all as specified and as directed.

Supply only coupling with studs between motor & pump complete all as specified and as directed.

Supply only sleeve of moter's as per existing size complete all as specified and as directed.

Re-metaling of pump shaft, turning for bring it to Internal dia size of bearing in rear end cover complete all as specified and as directed.

Supply only Neck ring complete all as specified and as directed.

Supply only driven end bearing of motor shaft complete all as specified and as directed.

Supply only non driven end bearing of motor shaft complete all as specified and as directed.

Dismantling / taking out of Complete removal of old painted surfaces of pump set size 30HP to 40HP and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and as directed. Note;- Painting shall be done by spray machine.

Dismantling / taking out of Centrifugal / Monoblock pump / motor set 15HP - 20 HP , 3 phase, 415 V AC from pump house at any location/Yard transporting to contractor's work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site complete all as specified and as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Cutting out the existing winding of the motor, opening of winding, re winding of motor with same size of winding wire as existing including varnishing, drying and making connection complete all as specified and as directed.

Repairing of pump by rethreading of worn out studs holes and S&F over size studs with nut and washer complete all as specified and as directed.

Supply only driven end bearing of pump shaft complete all as specified and as directed.

Supply only gun metal / stainless steel bush of pump shaft complete all as specified and as directed.

Balancing and repairing of pump shaft complete all as specified and as directed.

Supply only non driven end bearing of pump shaft complete all as specified and as directed.

Supply only of gland and packing complete all as specified and as directed.

Supply only cooling fan complete all as specified and as directed.

Supply only cooling fan cover complete all as specified and as directed.

Supply only CI impeller of similar make complete all as specified and as directed.

Supply only connection pipe complete all as specified and as directed.

Supply only coupling with studs between motor & pump complete all as specified and as directed.

Supply only sleeve of moter's as per existing size complete all as specified and as directed.

Re-metaling of pump shaft, turning for bring it to Internal dia size of bearing in rear end cover complete all as specified and as directed.

Supply only Neck ring complete all as specified and as directed.

Supply only driven end bearing suitable of pump set of motor shaft complete all as specified and as directed.

Supply only non driven end bearing suitable of pump set of motor shaft complete all as specified and as directed..

Dismantling / taking out of Complete removal of old painted surfaces of pump set size 15 HP - 20HP and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and as directed. Note;- Painting shall be done by spray machine.

Dismantling / taking out of Centrifugal / Monoblock pump / motor set - 10 HP , 3 phase, 415 V AC from pump house at any location/Yard transporting to contractor's work shop, dismantling for carrying out necessary repais / renewal of parts of pump and depositing the same after repair, reassembling complete to site complete all as specified and as directed. Note:- (i) New spares/parts shall be measured & paid separately under appropriate items listed here-in-after. (ii) Quoted rate shall be deemed included of transporting, repair, overhauling and replacement of spares complete.

Cutting out the existing winding of the motor, opening of winding, re winding of motor with same size of winding wire as existing including varnishing, drying and making connection complete all as specified and as directed.

Repairing of pump by rethreading of worn out studs holes and S&F over size studs with nut and washer complete all as specified and as directed.

Supply only driven end bearing of pump shaft complete all as specified and as directed.

Supply only gun metal / stainless steel bush of pump shaft complete all as specified and as directed.

Balancing and repairing of pump shaft complete all as specified and as directed.

Supply only non driven end bearing of pump shaft complete all as specified and as directed.

Supply only of gland and packing complete all as specified and as directed.

Supply only cooling fan complete all as specified and as directed.

Supply only cooling fan cover complete all as specified and as directed.

Supply only CI impeller of similar make complete all as specified and as directed.

Supply only connection pipe complete all as specified and as directed.

Supply only coupling with studs between motor & pump complete all as specified and as directed.

Supply only sleeve of moter's as per existing size complete all as specified and as directed.

Re-metaling of pump shaft, turning for bring it to Internal dia size of bearing in rear end cover complete all as specified and as directed.

Supply only Neck ring complete all as specified and as directed.

Supply only driven end bearing suitable of pump set of motor shaft complete all as specified and as directed.

Supply only non driven end bearing suitable of pump set of motor shaft complete all as specified and as directed..

Dismantling / taking out of Complete removal of old painted surfaces of pump set size 10HP and applying two coat of synthetic enamel paint (1st quality) over a coat of metal primer (hammer tone finish) complete all as specified and as directed. Note;- Painting shall be done by spray machine.

Supply and fixed in repairs Single Phase Preventor Relay complete all as specified and as directed. Make: ( L&T / Minilac / C&S)

Dismantling and taking out faulty analog type Ammeter from LT panel and supply and fixing three phase Ammeter digital type upto 0 to 100 Amps with suitable CT's ratio of size 96 mm x 96 mm of any range as required at site including necessary control wire connection and testing complete all as specified and directed. Make: L&T/C&S/AE/Secure

Dismantling and taking out faulty analog type voltmeter from LT panel /feeder pillar box and S&F three phase power voltmeter digital type suitable for ( 0-500 volts) range, size 96mmx96mm size including necessary control wire connection and testing complete all as specified and as directed. Make: L&T / C&S / AE / Secure

Supply and fixed star delta DOL starter with auto transformer complete with suitable size cable for connection between starter to auto transformer suitable for upto 7.5 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and as directed. Make: L&T/C&S/Bharat Cutler Hammer/ Maxwell/Jyoti.

Supply and fixed star delta starter with auto transformer complete with suitable size cable for connection between starter to auto transformer suitable for upto15 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and as directed. Make: L&T/C&S/Bharat Cutler Hammer/ Maxwell/ Jyoti.

Supply and fixed star delta starter with auto transformer complete with suitable size cable for connection between starter to auto transformer suitable for upto 25 HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all as specified and directed. Make: L&T/C&S/Bharat Cutler Hammer/ Maxwell/Jyoti.

Supply and fixed star delta starter auto transformer complete with suitable size cable for connection between starter to auto transformer suitable for upto 40HP, 3 Phase, 415 V electric motar including necessary connection and fixed on stand made out of angle iron 40 X 40 X 4 mm size complete all specified and as directed. Make: L&T/C&S/Bharat Cutler Hammer/ Maxwell/Jyoti.

Supply and fixed change over switch 100 Amps, 415 volts, 4 pole, front handle type as per site requirement complete with suitable size cable for connection complete all specified and as directed. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

Supply and fixed change over switch 63 Amps, 415 volts, 4 pole, front handle type as per site requirement complete with suitable size cable for connection complete all specified and as directed. Make: L&T/C&S/Bharat Cutler Hammer/Maxwell/Jyoti.

Supply and fixed in repairs Contactor ML-3, 3 pole, 415 Volts ,18 Amps rating including necessary electrical connection complete all as specified and as directed. Make; L&T/C&S/ABB

Supply and fixed in repairs Contactor ML-2, 3 pole, 415 Volts, 32 Amps rating including necessary electrical connection complete all as specified and as directed. Make; L&T/C&S/ABB

Supply and fixed in repairs Contactor ML-3, 3 pole, 415 Volts ,40 Amps rating including necessary electrical connection complete all as specified and as directed.. Make; L&T/C&S/ABB

M&L Mild screw nut, bolts with washer upto 12 mm dia and 100 mm long ( Machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends , each screwed end to be fitted with washers and one hexagonal or square nut complete all as specified and as directed

Supply & fix in repair electronic control timer 3 phase, 50HZ type ET-100 , 3-30 sec and 12-120 sec as per requirment of suitable capacity as required at site complete all as specified and as directed.. Make:- L&T/ABB/ Legrand/ AE/Secure.

Supply & fix in repair engine starter relay of suitable capacity as required at site complete all as specified and as directed.. Make:- L&T/ABB/ Legrand/ AE/Secure.

Supplying, laying or fixing, jointing and testing LT under ground electric power cable Crossed linked polyethylene ( XLPE Cable) insulated, galvanised steel strip or wire armoured, ISI-7098 Marked, with aluminium conductor multi stranded , heavy duty 1100 Volts grade of size 70 sqmm cross sectional area, 3 1/2 core, complete all as specified laid in trenches / laid under floor or fixed naked with walls / on poles / in ducts / in GI pipes etc. including taking down ( Excavation, earth work, sand cushioning, protection bricks/ tiles/ block,Clamps, nuts , bolts, washers and pipe shall be measured and paid separately under appropriate items.

All as per item No. 21.00 above but size of 50 sqmm 3.5 core complete all as specified and as directed.

All as per item No. 21.00 above but size of 16 sqmm 4 core complete all as specified and as directed..

All as per item No. 21.00 above but size of 10 sqmm 3 core complete all as specified and as directed..

S & F of submersible flat copper stranded cable 1100 Volt grade of size 10 sqmm 3 core complete including taking down all as specified and directed.

S & F of submersible flat copper stranded cable 1100 Volt grade of size 6 sqmm 3 core complete including taking down complete all as specified and as directed.

Supplying and fixing connecting, testing and commissioning fixed type rupturing capacity MCCB 25 to 100 Amps , 3 pole , 415 Volts, 16 KA, 50 Hz including spreader terminals complete all as specified and as directed.

Supplying and fixing connecting, testing and commissioning fixed type rupturing capacity MCCB 125 Amps , 3 pole , 415 Volts, 16 KA, 50 Hz including spreader terminals complete all as specified and as directed.

Supplying and fixing connecting, testing and commissioning fixed type rupturing capacity MCCB 160 Amps , 4 pole , 415 Volts, 36 KA, 50 Hz including spreader terminals complete all as specified and as directed.

Supplying and fixing connecting, testing and commissioning fixed type rupturing capacity MCCB 200 Amps , thirmal magnatic adjustable type 4 pole , 415 Volts, 36 KA, 50 Hz ,Ics=100%Icu@ with suitable size including spreader terminals complete all as specified and as directed.

Supply and fixed MCCB 250 Amps, 415 volts AC 50Hz, 4 pole, bracking capacity 36 KA adjustable type thermal magnatic setting, Ics=100%Icu@ with suitable size of sheet metal enclosure including taking down complete all as specified and as directed.

Supplying and fixing connecting, testing and commissioning fixed type rupturing capacity MCCB 400 Amps , thirmal magnatic adjustable type 4 pole , 415 Volts, 36 KA, 50 Hz, Ics=100%Icu@ with suitable size including spreader terminals complete all as specified and as directed.

Material and Labour in replacement of building security light LED lighting ENDURA CITYLINEAR NEO 90 W LED Cat No: 90 W LED 757SASYBOTG of Havells or equivelent in crompton/ Phillips complete all as specified and directed, including mounting bracket made of 50mm bore medium grade GI tubing 1.2 mtr long with suitable calmps made of FE 40x6mm , Nos for each Bkt and nuts and bolts duly aluminium painted with two coats of red oxide primer complete all as required and as directed at site.

Supply & Fix GI pipe light grade 40mm for cable protection fixed to poles / bldg incl two Nos MS clamps made to shape out of 25 x 3mm MS flat and painting incl bolt, nut, washer etc complete all as specified and as directed.

Supply, installed, connecting, testing and commissionning LT feeder pillar box / panel board / out door type, made out of 3.15mm thick, IP- 54, CRCA sheet, weatherproof, insulated, of size 1100 x 1050 x 620 mm, 3 phase, 4 wire, 415 Volts, AC, 50 HZ with TPN copper bus bar of capacity 400 A and with PVC insulated hat shink colour code sleeves mounted horizontaly with porcelain insulators, sufficient air vent provision for all three sides stickers / plastic plates for switch gear details complete with voltmeter 0-500 volts Ammmeter 0-600 Amps with CTS & seletor switches back to fuse including lamps with toggle switches duly wire including locking arrangement & suitable foundation / platform for mounting the panel with space for including switch gears including taking down complete all as specified and as directed. (i) MCCB TPN 250 Amps 36 KA - 1 No (Incoming). (ii) MCCB TPN 100 Amps 16 KA - 2 Nos (out going). (iii) MCB TPN 415 Volts 63 Amps -01. (iv) Provn of space for one feeder spare. Note : 1. All out going / incoming cable connection marking including digging out loop deemed to be included in cost. 2. writing of feeder names with white paint in capital letters all as specified suitable size of glands & copper lugs to be provided for cable etc.3. including excavation and earth work foundation 300mm height of ground lavel and 150mm depth complete.

S & F (in repair) rubber gasket 3 mm thick (packing ring) suitable for 50 mm bore flange lowering pipe cut type complete all as specified and directed

S & F (in repair) rubber gasket 3 mm thick (packing ring) suitable for 80 mm bore flange lowering pipe cut type complete all as specified and directed

Excavating in trenches, not exceeding 1.5 m wide and not exceeding 1.5 m in depth for foundations of poles, laying of cables, pipes etc. and getting out including trimming the sides and forming bottom surfaces to required levels in soft/loose soil complete all as specified and directed.

Removing excavated material ( soils) not exceeding 50m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.

Returning, filling in, including spreading, levelling, and well ramming in layer not exceeding 25 cm thick in soft/loose soil complete all as specified and directed.

Material and labour for river sand, washed and screened dry for cushioning to under ground cable in trenches below and around under ground cable including spreading and levelling complete as specified and directed .

M&L laying well burnt old size Fly ash bricks, straight or curved on plan , laid flat with width equal to length of brick , laid dry over electric cable for protection all as specified.

Supplying and fixing galvanised mild steel pipe / tubing, 80 mm bore dia, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps , bolts , nuts and washers complete all as specified. Note:- Excavation & Earth work, mild steel clamps, bolts , nuts and washers shall be measured and paid separately.

Supplying and fixing galvanised mild steel pipe / tubing, 40 mm bore dia, light grade complete with all fittings, laid in trenches / under roads, drain, paths, fixed to poles/ walls with Mild steel clamps, bolts , nuts and washers complete all as specified. Note:- Excavation & Earth work, mild steel clamps, bolts , nuts and washers shall be measured and paid separately.

Repair / Rewinding of monoblock pump (Booster pump) or motor set of cap 0.5 - 03 HP single phase 230 Volts ,with with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronge empallor as per site requirement. complete all as specified and directed by Engr-in-Charge.

Repair / Rewinding of monoblock pump (Booster pump) or motor set of cap 05 - 7.5 HP single phase 230 Volts , with super enamelled copper conductor of standard size including varnish, insulation paper and tape including, replacement of unserviceable bush, and replacement to unserviceable bronge empallor as per site requirement. complete all as specified and directed by Engr-in-Charge.

Supply and fix in repair gland packing for sluice valve of size 150/200 mm dia complete all as specified and as directed.

Supply and fix in repair gland packing for sluice valve of size 100/80 mm dia complete all as specified and as directed.

S & F PVC in replacement float valve / ball valve high pressure with polythene float and fly nut complete screwed with iron pipe or brass and fixed in repairs ferrule of the following sizes of make Prayag / Symet complete all as specified and as directed.

15 mm dia complete all as specified and as directed.

20 mm dia complete all as specified and as directed.

25 mm dia complete all as specified and as directed.

Demolition of existing old unserviceable brick masonary valve chamber including demolition of unserviceable M.S iron cover and iron frame and construction of new valve chamber 90x90x90 cm inner dimensions, brick masonary in cm 1:4 PCC base in 1:3:6 of 7.5 cm thick & plastering 15 cm thick in CM 1:4 in inner side/copping of all chamber fabrications of Iron frame 40x40x6 mm size angle iron MS cover 3 mm thick with hinges and locking arrangements duly painted excavation,earth work complete all as specified and as directed.

All as per item No. 50.00 here in before but size of pit 60x60x60 cms with suitable MS cover and angle iron frame complete all as specified and as directed..

M & L in replacement of Cast iron Butterfly Valve , lever operated, Nitrile/EPDM Rubber lining test pressure PN 1.6 ISI markedof size 150mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect complete all as specified and as directed.

M & L in replacement of Cast iron Butterfly valve, lever operated, Nitrile/EPDM Rubber lining test pressure PN 1.6 ISI markedof size 100mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect complete all as specified and as directed.

M & L in replacement of Cast iron Butterfly valve, lever operated, Nitrile/EPDM Rubber lining test pressure PN 1.6 ISI markedof size 80mm dia including all fittings such as nuts , bolts, washers/ welding work and rubber gasket etc complete in all respect complete all as specified and as directed.

M & L in replacement of Cast iron Butterfly valve, lever operated, Nitrile/EPDM Rubber lining test pressure PN 1.6 ISI markedof size 65 mm dia including welding work all fittings such as nuts , bolts, washers and rubber gasket etc complete in all respect complete all as specified and as directed.

M & L in replacement of cast iron sluice valve ISI marked 80 mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780/14846 complete in all respect complete all as specified and as directed.

M & L in replacement of cast iron sluice valve ISI marked 100mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780/14846 complete in all respect complete all as specified and as directed.

M & L in replacement of cast iron sluice valve ISI marked 150mm dia class PN 1.6 flanged with gun metal spindle including all fittings such as nuts , bolts, washers tec with iron wheel confirming to IS: 780/14846 complete in all respect complete all as specified and as directed.

Dismantling / Taking out old unsv 100mm NRV and S & F CI reflux valve (non return valve ISI 5312) of size 100 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or biber board gasket complate with and including including complete fixing accessories like nut, bolt, washers, packing etc and all as specified and directed by Engr-in-Charge.

Dismantling / Taking out old unsv 80mm NRV and S & F CI reflux valve (non return valve ISI 5312) of size 100 mm bore , heavy duty both end flanged of pressure rating PN- 1.6 and joint with rubber or biber board gasket complate with and including including complete fixing accessories like nut, bolt, washers, packing etc and all as specified and directed by Engr-in-Charge.

Disconnecting / removing of existing tanks of capacity upto 500 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as directed by Engr-in-charge.

Disconnecting / removing of existing tanks of capacity 500 Ltrs to 1000 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as directed by Engr-in-charge.

Disconnecting / removing of existing tanks of size 2000 Ltrs setting aside (for lowering if required) and cleaning of all scaling and dirt etc with bleaching powder and making it germ free including hoisting, reconnecting and refixing in position and writting date of cleaning and next due date with white paint complete all as directed by Engr-in-charge.

M&L in replacement for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 500 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed .

M&L in replacement for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 1000 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed.

M&L in replacement for dismantling old unserviceable tank in replacement with new Rotational moulded polyethylene water storage tanks of capacity 2000 ltrs three layered (Cylindrical vertical with closed top) hoisted and fixed in position including ball cock brass of size 20mm dia with polythene ball and inlet, outlet including wash out with plug/over flow pipe and anti mosquito rose coupling at one end all as specified in SSR Pt-I complete all as specified and as directed.

Supply and Fixing in repair of chiller motor 2 / 3 HP , 1.5 KW, RPM 910 -1200, 3 Phase, 50 Hz, 415 Volts , Class F, AMPS 3.8, suitable for plant as per samples complete fixing arrangement all as specified and directed by the Engineer-in-charge. Make :- OSWAL / TATA / Kirloskar / Jindal

All as per item No. 67.00 above but motor winding 2/3 HP suitable for plant as per samples complete all as specified and as directed by Engr -in Charge.

M&L in replacement removal of u/s cable and S&F PVC insulated multistranded with 6 runs of 16 sqmm copper conductor cable including PVC rigid conduit and its accesosories from motor to starter fixed on surface of wall / ceiling / floor complete all as specified and directed.

M&L in replacement the unserviceable CI foot valve S&F new CI foot valve 150 mm dia flanged pipe with necessary bolts and nuts etc complete all as specified and directed.

M&L in replacement the unserviceable CI foot valve S&F new CI foot valve 100 mm dia flanged pipe with necessary bolts and nuts etc complete all as specified and directed .

M&L in replacement the unserviceable CI foot valve S&F new CI foot valve 80 mm dia flanged pipe with necessary bolts and nuts etc complete all as specified and directed.

M&L in replacement the unserviceable brass foot valve S&F new brass foot valve 50 mm dia flanged pipe with necessary bolts and nuts etc complete all as specified and directed.

M & L for display board of size 750mm X 1000mm made out of acrylic sheet 2 mm thick fixed on 12mm thick plywood & 20 mm wide aluminium beeding all around the sheet edges including 2 Nos.Key holes hooks for hanging & 40 mm batten to be fixed on wall for bottom supports.The board shall include description of pump /motor/any other machinery / layout / schamatic diagram of water / electric supply system etc all as directed by Engineer- in- Charge.letters/ diagrams made out of computer aided print in acrylic material of any colours as specified pasted on sheet for the description / details given saparetely for each board fixing the same at E/M installations as directed by Engineer- in- charge.

Supply and installation with testing complete of digital water level indication device, operating on single phase supply direct display in 19 mm size digit system in meter/cubic meter of water of over head tank ensuring alarm while water fall or rise over predetermined limit including taking down unserviceable one with the following description complete all as specified and directed. Note: (a) The entire unit must operate through a compact electronic circuit which must ensure reliable operation at 230 V+ 10% at 50 HZ + 5% with readable in digit display and alarm at low and high level of UG sump. (b) One circuit must be housed in high impact polystyrene moulded box with nylon moulded connections strips. The level system must be resistance/transducer type and resistive to corrosion and other contents available in water. (c) The whole unit must be controlled electronically and the upper level and lower level indications must be transmitted through highly sensitive micro switch. The complete unit must be in two parts. Each complete part must be fitted in MS CRS sheet box separately. One must be installed at UG sump/OH tank and second at pump House with proper powder coating paint with locking arrangements complete all as specified and as directed.

S&F flexible copper cable 4sqmm 4 core size from sump/over head tank to pump house for connecting the both units of water level indicator and passing through PVC flexible / rigid conduit and fixing on walls wherever required complete all as specified and as directed.

S&F pressure guage complete with suitable size of connecting pipe and taps etc of range 10 to14 Kg/cm2 inlcuding removing the existing unserviceable pressure guage complete with connecting pipes, taps hole in the pumping line of any size all as directed.

Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick buried directly in ground (earth pit ndot less than 2.25 mtrs deep below ground level) with top edge of the earth plate at a depth of not less than 1.5 mtr below ground level connected to galvanized iron strip 25 x 4 mm as earthing lead by means of bolts, nuts and washers made out of GI/steel earth strip protected by GI light grade pipe of 40 mm dia and connecting to main panel board/switch board/control board all shown in electrical plate No 3 of SSR Pt I incl PCC chambers in 1:2:4 and RCC cover slab with 8mm dia MS bars reinforced at 10 cm center to center both ways incl earth work like excavation, returning filling back disposal etc complete.

M & L Galvanised iron strip 25 x4 mm with saddles and fixing screws etc. for roof conductors and down conductors above ground, complete all as specified and as directed

Supplying and fixing MPCB thremal rangr 25-32 Amps, 3 pole, 415-440 volts, 50 HZ, 16KA power manual motor starter with rotary knob control protection against overload short circuit including phase failure complete all as specified and directed.

Supplying and fixing MPCB thremal rangr 50-60 Amps, 3 pole, 415-440 volts ,50 HZ, 16KA power manual motor starter with rotary knob control protection against overload short circuit including phase failure complete all as specified and directed.

Supply & Fixing pressure pump / (Booster pump) 0.6 HP complete set, with complete fixing accessories and connection complete all as specified and as directed .Model No - CPBS-5242V, MSTG-2SS-1MP.

Supply & Fixing pressure pump / (Booster pump)1.0 HP complete set, with complete fixing accessories and connection complete all as specified and as directed .Model No - CPBS-T3824V, MSTG-4SS-1MP.

Note : Total amount of Schedule of Credit for retrieved material mentioned on General summary of Tender documents in PDF format will be deducted offline during acceptance of Tender

LUXMI ELECTRONIC WORKS

DAVINDER SINGH

PAWAN KUMAR GOVT. CONTRACTORS

RANBIR ENTERPRISES

shivom builders

MOHAN LAL AND SONS