CO Primary Health Center Building Level II at Burma Papri Teshil Nahan Distt. Sirmour HP SH Providing Electrical installation thereof

Amount

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required

Group-A

Group-B

Group-C

Wiring for twin control light point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, 2 way modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required.

Supplying and fixing suitable G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required.

Supplying and fixing suitable G.I. box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required.

Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required

2x1.5 sq.mm + 1x1.5 sq.mm earth wire

2x 4 sq.mm + 1x 4 sq.mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

2 X 10 sq. mm + 1 X 6 sq. mm earth wire

4 X 4 sq. mm + 2 X 4 sq. mm earth wire

Earthing with copper earth plate 600 mmx600 mmx 3 mm thick, including accessories and providing masonry enclosurewith cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal /coke and salt as required.

Providing and fixing 4.00 mm dia Copper wire on surface or in recess for loop earthing as required.

Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2 sets of brass nut bolt & spring washer spaced at 50mm)

Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 KA, " C’ curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required.

Single pole

Supplying and erection of 40/50/63 amps rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required:-

Double pole. Cat-A.

Supplying and fixing following way. single pole and neutral, sheet steel, MCB distribution board, 240V on surface/recess, complete with tinned copper bus bar, neutral bus bar, learth bar, din bar, inter connections, powder painted including earthing etc.as required.( But without MCB/RCCB/Isolator)

8 way, Double Door

12 way, Double Door

Supplying and erection of light sub - panel (confirming to(IEC code-61439) of dimensions 650mm(H)*450mm(W)*200mm(D) with plus 5cm variation,made from 1.6mm thick M.S. Sheet duly fabricated in a segregated manner for housing of switch fuse units,by welding each compartment on five sides &front sides hinged,complete with locking arrangements to house 63 amp MCCB with 63 amp Copper busbar & 1 set RYB light indicator and cable alley as required complete in all respects including the cost of switchgear . The cubical pedestal shall have cable entry box at one side,with epoxy powder coated approved paint and bonding to the existing earth etc.

Supplying and erection of wall mounted metal boards for switch gear mounting of suitable size, with permissible variation in size of plus minus 5mm, welded frame work made of M.S. angle iron 35mm x 35mm x 5mm, duly welded complete with 1.6mm thick M.S. sheet fixed with hinges as openable front, complete with locking arrangement including painting and bonding to the existing earth as required:-

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes on wall surface as required

Armoured cable 25 sq. mm (3.5 core)

Providing & Laying of one number aluminium conductor, PVC insulated and PVC sheathed armoured/ XLPE power cable, 1.1 KV grade of following sizes direct in ground including excavation and refilling the trench etc as required, but excluding sand cushioning and protective covering.

Armoured cable 25 sq. mm (3.5 core)

Providing and installation exhaust fan of following sizes in the existing opening, including making the hole to suit the size of the above fan, making good the damages, connections, testing and commissioning etc. as required:-

Exhaust Fan, Light duty, (Domestic) 300 mm sweep

Exhaust Fan, Heavy duty, (Domestic) 300 mm sweep

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including, providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required: of Approved Make

Ceiling Fan 1200 mm sweep

Ceiling Fan 1400 mm sweep

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Providing and installation of following type of surface mounting square/round type LED panel Light with aluminium die cast housing in white finish with anti glare polycarbonate diffuser and seprated energy efficient constant current, non-integral, electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, connections, testing etc. as required:of Approved Make

Square/round LED Panel Light 10/12 W Surface

Square/round LED Panel Light 15W Surface

Square/round LED Panel Light 24W Surface

Providing and installation of following type of LED batten with aluminium housing, anti glare polycarbonate diffuser and energy efficient constant current, integral electronic driver; suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, including mounting clamps, connections, testing etc. as required: of Approved Make

LED Batten Light 10W

LED Batten Light 20W

Providing and installation of following type of LED street light( cat no. BCLST 25W LED /V2) with powder coated pressure die cast housing along with prismatic polycarbonate diffuser and LEDs with secondary optics and IP65 protection, electronic driver; suitable for input voltage: AC220-240V,50/60Hz, complete with all accessories, connections , testing and commissioning etc. as reqd. Make Philips, Bajaj, C&S, or any other approved by Engineer-in-Charge. LED 25 W

Supplying and erection of street light bracket made of G.I.pipe 'A' class of suitable length and dia, the pipe bended to give an angle of 100 to 110 degree fitted with bolt & nuts at the top of existing pole or wall including painting the pipe with two coats of approved paint over priming coat complete in all respects as required.

32 mm dia. G.I. pipe, heavy class

Supplying and fixing brass batten/ angle holder including connection etc. as required

Supplying and fixing of fancy wall bracket suitable for input voltage: AC 220-240 V, 50/60Hz, complete with all accessories, lamp holder, but excluding lamp including making connections, testing etc. as required: of Approved Make

Wall light fixture, brushed nickel finish body, Opal Glass diffuser, suitable for 9 W retrofit LED lamp B22 base.

Providing and installation of following type of LED retrofit lamp B-22 holder base with polycarbonate body and aluminium heat sink; suitable for input voltage: AC 220-240 V, 50/60Hz, including mounting in existing fixture, testing etc. as required complete in all respects. LED retrofit lamp 9 W Make: Philips, Bajaj, C&S, Panasonic or any other approved by Engineer-in-Charge.

Supplying and fixing call bell/ buzzer suitable for single phase, 230 V complete as required

Providing and installation of stationary storage type Electric water heater (Geyser) of various sizes by means of expansion-bolts with nuts and washers, including embedding of expansion-bolts in the wall, making good the damages, electrical connections, testing etc. complete as required:-

15 Liter capacity water heater (Cat-A)

25 Liter capacity water heater (Cat-A)

Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.

Supplying and fixing electrical switch board, having 3 No. of 5 amp. switches and socket on suitable size of metal box of mm deep 6 modules(205mmx78mmx50mm on surface or in recess with suitable modular sheet cover in the front i/c providing and fixing 3 No. 5 pin 5/6 amp socket outlet and 5/6 amp modular type switch, connection, painting etc.as req.(For light plugs)

supplying & fixing testing and commisioning of storage type water cooler (Molel/Size:- SDLX4080B) with reciprocating compressor of ISI marked,envioromental friendly new age refrigrent of rugged stainless steel/galvanised steel body total storage capacity 80 ltr and colling capacity 40 ltr/hr with 2 Nos of faucets and all accessories etc .Make usha ,blue star,carrier or equivalent make .

Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. in the existing trench,complete as required

63 mm dia (OD-63 mm & ID-51 mm nominal)

P/F openable sheet metal shutter suitable for exhaust fan size 300mm as required in all respect.

Rakesh Sharma