SPECIAL REPAIR TO BLDG NO. NP 01 AND NP 02 (OR MD ACCN) AT JNE DOWN OF 14 EME BN (COMD) UNDER GE (NORTH)

Amount

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not backing), terrazo, dado and skirting etc. on brick, concrete or stone walls including racking out joints, hacking for key and scrubbing down and removing serviceable tiles to store and rubbish off the premises etc, complete all as specified and directed.

M&L for 7-8mm thick non skid ceramic coloured tiles (square / rectangular), area of each tile exceeding 0.11 Sqm but not exc 0.18 Sqm as in floors with skirtings, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, laid/ fixed over and including 15mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for glazed ceramic coloured tiles, size 450x350x7mm / 350x250x7mm thick as on vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles, fixed over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab flooring, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete and rounding of edges, laid over and including 20mm thick screed bed in CM 1:4, complete all as specified and directed.

M&L for 18-20mm thick machine cut kota stone slab as in skirtings, dados, walls, jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, grinding and polishing complete and rounding of edges, fixed over and including 10mm thick plaster in CM 1:3, complete all as specified and directed.

M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and the like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and including grinding and polishing with rounding to edges of stone slabs one edg complete, laid/ fixed over and including 20mm thick screed be/ plaster CM 1:4, complete all as specified and directed.

Taking down cement plaster on brick walls, stone masonry/ walls, concrete surfaces etc. including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and directed.

M&L for 15mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:4 with using water proofing compound, finished the surface even and smooth without using extra cement, complete all as specified and directed. Note :- Cost of WPC shall be shall be deemed to include in the quoted rates.

M&L for 10mm thick rendering on fair faces of brick work or concrete surfaces in CM 1:6, finished the surface even and smooth without using extra cement, complete all as specified and directed.

M&L for 5mm thick rendering in CM 1:3 as on ceiling, finished the surface even and smooth without using extra cement, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area not exceeding 1.50 Sqm each including cutting holes for taking out hold fasts or dismantling brick work or cut holes for taking out hold fasts and making good disturbed surface to match with existing surface, complete all as specified and directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames), area exc 1.50 Sqm but not exc 4.0 Sqm each including cutting holes for taking out hold fasts or dismantling brick work or cut holes for taking out hold fasts and making good disturbed surface to match with existing surface, complete all as specified and directed.

S&F pressed steel frame for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete, frame size 125mm x 60mm and including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F pressed steel frame for doors with one or more rebates including necessary lugs, hinges, lock strike plate etc. complete, frame size 105mm x 60mm and including one shop coat of red oxide zinc chrome primer, complete all as specified and directed.

S&F plain framed, panelled shutter 35mm thick, 2nd class hard wood (two panel) with lock rail and panel of 9mm thick BWP commercial ply or 12mm thick veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS:1003 (Part I), kiln seasoned and chemically pressure treated, complete all as specified and directed.

S&F 35mm thick 2nd class hardwood glazed and Skelton shutter, open rebated and prepared to receive glass, gauge etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, stiles and rails as specified in SSR Part-I Cection 8 Clause 8.20 (b), complete all as specified and directed.

M&L for PCC 1:3:6 type C-0 (using 12.5mm graded stone aggregates) as filling in hollow pressed steel frame, hold fasts and similars articles, complete all as specified and directed.

S&F aluminium anodised barrel tower bolts of extruded section of size 150mm, complete all as specified and directed.

S&F 300mm long aluminium alloy anodised sliding door bolt with hasp and staple (bolt type) and fixing clip of sheet, cast or extruded sections and fixing bolts and sliding bolt of extruded sections or cast aluminium alloy, complete all as specified and directed.

S&F 150mm long alunminium handle, cast type, oval shape, complete all as specified and directed.

M&L for preparation of new wooden surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed.

M&L for preparation of new steel and iron surfaces exceeding 10cm width or girth and applying two coats of synthetic enamel paint over preprimered surface, complete all as specified and directed.

S&F in replacement wash down water closet pan (pedastal pattern) complete with 'P' or 'S' trap including connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe etc. including PVC seat cover with aluminium hinging device, complete all as specified and directed.

S&F in replacement of vitreous china squatting pan ‘Orissa’ pattern of size 580x440mm, white with integral foot rest (excluding flushing systemn and flush pipe) with ‘P’ or ‘S’ trap, complete all as specified and directed.

S&F in replacement PVC low level cistern of 10 ltrs capacity with top push button inclusive of brackets and PVC bend long type and connecting to flush pipe of any size and pattern with inlet ball valve, float and handle and 15mm dia PVC connection pipes of 450mm long, complete all as specified and directed.

Demolition of brick work or stone boulder masonry, built in cement mortor including all quoins, arches, pillars etc, complete all as specified and directed.

M&L for brick work with sub class ‘B’, old size bricks, straight or curved on plan exc 6 mtr mean radius, built in CM 1:6, complete all as specified and directed.

M&L for half brick work with sub class 'B' brick straight or curved on plan exc 6m mean radius but in cm 1:4, complete all as specified and directed.

S&F in replacement pillar tap, cast copper alloy, fancy type with capstan head, chromium plated, screwed down high pressure with or without lettered, Hot or Cold with long screwed shanks and fly nuts, screwed to iron pipe of 15mm bore, complete all as specified and directed.

S&F in replacement PVC connection of 15mm dia with PTMT nuts of length 450mm, complete all as specified and directed.

S&F in replacement chromium plated tubular towel rail, 'D' type, 600mm long between flanges, complete all as specified and directed.

S&F stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm, complete all as specified and directed.

M&L for preparation of new decorated surfaces and applying two coats of distemper oil emulsion on walls over and including a coat 1-2mm thick wall care putty and a coat of primer, complete all as specified and directed.

M&L for preparation of new plastered surfaces of ceiling and applying two coats of white wash, complete all as specified and directed.

M&L for preparation of new or old surfaces of any description and applying two or more coats of 100% premium acrylic emulsion paint having VOC less than 50 Gram/litre and UV resistance as per IS-15489:2004, alkali & fungal resistance, dirt resistance, exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/10 Sqm over and including priming coat of exterior primer @ 0.90 litre/10 Sqm over and including 2-3mm thick wall care putty, complete all as specified and directed.

S&F stainless steel plate rack of size 750mm x 900mm x 250mm, made out of 1.0mm thick stainless steel sheet with steel shelves and hanging arrangement for utensil with SS screws, complete all as specified and directed.

S&F in replacement kitchen sink with drainage board, made of stainless steel 1mm thick, overall size 915mm x 460mm, bowl size 410mm x 330mm x 160mm with plugs including bedding in cement mortar and fixing cantilever brackets, 32mm dia CP waste coupling & PVC waste pipe, complete all as specified and directed.

S&F 25mm dia stainless steel curtain rod with brackets/ wall brackets and knobs at both ends as per site requirement including taking down old existing PVC conduit pipes with accessories, complete all as specified and directed. Note :- The cost of brackets and knobs shall be deemed to include in the quoted rates. Nothing extra shall be paid on this account.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

Taking up or down 25mm bore steel tubing and connections including cleaning for refixing or removal to store, complete all as specified and directed.

S&F 15mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

Re-fixing of old 15mm bore steel water tubing and connections in new or old position (walls, ceiling, floors etc.) including required GI fittings, complete all as specified and directed.

S&F 20mm bore steel water tubing, medium grade, galvanised with all fittings and fixtures, fixed to wall or ceiling or laid in floors, complete all as specified and directed.

S&F in replacement stop valve, chromium plated, cast copper alloy, screwed down high pressure with crutch or butterfly handle, screwed both ends, fixed to 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement of 15mm dia bib tap, cast copper alloy, fancy type, chromium plated with crtuch or butterfly handle, screwed down, screwed for iron pipe or brass ferrule, complete all as specified and directed.

S&F in replacement waste coupling of PTMT (half or full threaded) (minimum weight 32mm-45gms / 40mm-60 gms), complete all as specified and directed.

S&F in replacement PVC connection of 15mm dia with PTMT nuts of length 600mm, complete all as specified and directed.

S&F 500 ltrs capacity tripple layered rotational moulded polyethylene water storage tank, white colour (cylindrical vertical with closed top) with, hoisted and fixed in position including nipple inlet and outlet and conneting pipes, complete all as specified and directed.

S&F ball valve high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball, screwed for 20mm bore iron pipe (min weight 210 gms), complete all as specified and directed.

Demolition of cement concrete of any description and in any position, not otherwise specifically provided for, complete all as specified and directed.

M&L for 75mm thick PCC 1:4:8 type D-2 as in floors, sub base of floor etc, complete all as specified and directed.

M&L for 40mm thick plain cement concrete 1:2:4 type B-1 (using 20mm graded crushed stone aggregates) as floor, staircase including steps etc, finished the surface even and smooth, complete all as specified and directed.

S&F in replacement wash hand basin of size 550mm x 400mmm vitreous china, white, pedestel type including MS brackets, 32mm dia brass chromium plated waste coupling and PVC waste pipe of 32mm dia, complete all as specified and directed.

S&F chromium plated towel ring, fixed with SS/ CP brass screws and wooden/ plastic cleats (Minimum weight 90 gms), complete all as specified and dirceted.

Demolition of cement concrete reinforced of any description and in any position not otherwise specifically provided for, complete all as specified and dirceted.

M&L for RCC 1:2:4 (Nominal Mix) type B-1 (using 20mm graded crushed stone aggregates) as in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in the shelves and the like including 15mm thick plastering in CM 1:4 with water proofing compound, laid/made to slope as in RCC roof surfaces, complete all as specified and directed.

Use and waste of formwork to rough finished concrete soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work, not exceeding 200mm thick (Horizontal or sloping), complete all as specified and directed.

Use and waste of formwork to edges of concrete (rough finished) flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work, exc 10cm but not exc 20cm wide, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

M&L for mild steel TMT bars, 6-8mm dia and over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.90mm dia or securing with clips, complete all as specified and directed.

SF galvanised mild steel wire cloth 0.63mm nominal dia of wire & average width of aperture 1.40mm, complete all as specified and directed.

S&F powder coated aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc, complete all as specified and directed.

S&F powder coated (of approved colour) aluminium (minimum thickness of powder coated 50 micron) as in shutter of windows, ventilators, openable/ louvers, fixed/sliding type without sash bars, aluminium section not less than 0.55 Kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, aluminium snap beading, screws, rolling for smooth moving & locking arrangement etc. fixed to wall including preparation of disturbed portion both side (internal & external surfaces of wall) to match with existing surface and all sides of aluminium frame shall be sealed with silicon sealent (inner/outer face), complete all as specified and directed.

M&L for mild steel framed work such as grills, gratings etc. with ends of bars shouldered and/or riveted or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work including welding, conforming to Fe-290 Gde-E-165, complete all as specified and directed.

Providing and fixing 30mm thick factory made PVC door shutter consisting of panel of Hollow PVC Profile of 24mm thickness, consisting of frame made out of MS tubes of 19 gauge thickness and size of 19mm x 19mm inserted inside the hollow section of stiles, top and bottom rails and two 19mm x 19mm MS tubes inserted horizontally inside the hollow profile section at an equal distance from top and bottom of door and fixed with hollow profile section using 3mm thick Prelam PVC sheet using screws. Hollow PVC profile shall be lipped with 10mm (5mmx2) thick x 24mm width on stiles and rails using solvent cement. The inner panel shall be laminated with 5mm thick termite proof, water proof and fire retardant Prelam PVC sheet using solvent cement on both the sides of the panel etc. complete as per manufacturer's specification and drawing and as directed by Engr-in-Charge.

S&F solid PVC door frame of size 50mm x 47mm, made out of 5mm plain colour PVC sheet reinforced with MS Square tube in opening and fixed at site, complete all as specified and directed.

Dismantling wall and ceiling boards, fibre, pulp, insulation etc. or insulation boards / slabs / blankets, any thickness including cover fillets,complete all as specified and directed.

S&F 4mm thick non asbestos fibre cement board ceiling, size of panel 605mm x 605mm each, designed ceiling as approved, conforming to IS-14862, type 'B', category three including snapgrid frame work, hold fasts, suspenders, complete all as specified and directed.

S&F 4mm thick sheet glass ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

S&F 4mm thick figured glass, pin head type and glazing with oil putty or wooden beads in squares not exceeding 0.50 Sqm in each pane, complete all as specified and directed.

Dismantling of asbestos cement (corrugated, semi- corrugated etc.) or CGI as in roof coverings including ridges and in other situation, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based corrugated steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws, complete all as specified and directed.

S&F 0.50mm thick prepainted galvalume aluminum zinc coating GI based plain steel sheet of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed self tapping screws, complete all as specified and directed.

Demolition of cement concrete, un-reinforced as in sunken portion of WC and removing all loose particale alogwith exiting water proofing treatment, cleaning, cleaning by wire mess / brushes to removing all dirt and cleaning the surface with water etc, complete all as specified and directed.

Providing and laying water proofing treatment to sunken portion of WCs, bathrooms etc. by applying first layer of slurry of cement @ 0.488 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.253 Kg/Sqm this layer allowed to air cure for 4 hours then applying slurry of cement @ 0.242 Kg/Sqm mixed with acrylic based polymer modified cementitious composite compound @ 0.126 Kg/Sqm and allowed to aircure for 4 hours and joints seal with sealing compound as approved by GE, complete all as specified and directed. Note :- Before laying of lime concrete joints of trap/ WC/ Soil pipes shall be properly sealed with sealing compound of Roofex/ FOSROC and provn of 'P' or 'S' trap & Nahani / Floor traps with long arm.

M&L for 15mm thick rendering in Cm 1:3 on fair faces of brick work or concrete surfaces or roof surfaces (Accessable roof / Non Accessable roof) with using water proofing compound, finishing the surface even and smooth w/o using extra cement, complete all as specified and directed.

M&L for cement concrete 1:5:10 type E-2 (using 40mm graded crushed stone aggregates) as in sunken portion, complete all as specified and directed.

Demolition of cement concrete (un-reinforced) as in roofs of existing water proofing treatment of any type and thickness, complete all as specified and directed.

M&L for roughing surfaces of old concrete surfaces by picking up, sweeping, cleaning and washing down with water to remove dust etc. for local depressions RCC surface and brushing neat cement slurry with 3.0 Kg of cement per Sqm, complete all as specified and directed.

M&L for apply bituminous primer confirming to IS-3384 @ 0.40 Kg/Sqm on prepared surface on sunny day. After the primed surface has dried then apply a coat of hot blown 85/25 penetration grade blown bitumen, confirming to IS-702 @ 1.20 Kg/Sqm on the surfaces then provide APP (Atactiic Polypropylene) modified polymeric five layered membrane with central core of 100 micron high molecular high density firm, minimum weight of membrance shall be 3 Kg/Sqm. APP membrance will be laid across the slope from lowest line sloping roof towards ridge with minimum end lap of 150mm & side lap of 75mm bonded with hot blown bitumen, over the APP membrance apply semi hot blown 85/25 penetration grade bitumen @ 1.20 Kg/Sqm and blinded with fine sand in dry condition @ 0.50 Kg/Sqm dusted over the bitumen coat with two coats of aluminium paint, complete all as specified and directed. Note :- The laying of the membrane shall be got done by authorized applicator of the membrane manufacturer.

S&F in replacement health faucet, brass, chromium plated with 1000mm long 8mm dia chrome finish flexible pipe with wall hook, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in floor / stair case / base of tiles/stones, complete all as specified and directed.

S&F in replacement soap dish, brass, chromium plated, heavy duty, fixed to wall with plugs and with brass chromium plated screws, complete all as specified and directed.

S&F in replacement shower rose, brass, chromium plated, 125mm dia with or without swivel joint with & including CP brass arm and wall flange, fixing to steel pipe or union, complete all as specified and directed.

S&F in replacement glass shelf assembly, consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated brackets, guard and railing 60cm long, complete all as specified and directed.

S&F in replacement centre hole mixer for mixing hot & cold water for wash hand basin, cast copper alloy with dual capstan heads, chromium plated, screwed down, high pressure with lettered 'Hot' & 'Cold' with long screwed shanks and fly-nuts, screwed for 15mm bore iron pipe, complete all as specified and directed.

S&F in replacement wall mixer, brass, chromium plated, fancy type with capstan head handles, screwed down high pressure with lettered 'Hot' and 'Cold' including CP brass wall flanges and necessary extension nipples, screwed for 15mm bore pipe connection, complete all as specified and directed.

M&L for 18/19mm thick prelaminated particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, complete all as specified and directed.

S&F continuous (Piano type) hinges, mild steel, bright finish or electrogalvanised width of flap 30mm (when opened), complete all as specified and directed.

S&F hasp and staple, 100mm size, mild steel, safety type, stove enalmelled black including bolt to hinge plate and fixed with SS screws, complete all as specified and directed.

S&F 100mm long mild steel butt hinges, medium weight, cold rolled, complete all as specified and directed.

Dismantling of 75/110mm bore cast iron drain pipes, jointed in cement mortar and taking out from trenches (if required), complete all as specified and directed.

M&L for 100/110mm bore cast iron soil, waste and vent pipes, sand cast, in any length with or without ears with cement joints, fixed to walls with MS clamps of suitable size, complete all as specified and directed.

M&L for 75mm bore cast iron soil, waste and vent pipes, sand cast, in any length with or without ears with cement joints, fixed to walls with MS clamps of suitable size, complete all as specified and directed.

S&F cast iron bends (any radius), diminishing pieces or tapers (larger bore measured), suitable for 100mm bore pipe, complete all as specified and directed.

S&F cast iron bends (any radius), diminishing pieces or tapers (larger bore measured), suitable for 75mm bore pipe, complete all as specified and directed.

M&L for machine pressed rubber moulded manufactured / compacted by vibrating table method precast concrete interlocking paver block of any shape and size, confirming to IS:15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment and joints filled with sand including sand cushioning, complete all as specified and directed.

Taking down carefully the existing copper / aluminium point wiring of any size and type by disconnecting from the either terminals complete with switches, sockets, ceiling rose, regulators, bell etc. by unscrewing and removing materials to store for keeping in safe custody for re-use or for taking credit and making good to disturbed surface of walls, floors etc. to match with existing surfaces, complete all as specified and directed.

M&L for point wring for one light / fan point, controlled by one switch with 1.5 Sqmm (nominal area) PVC insulated and PVC unsheathed multi-stranded copper conductor cable FRLSH and including concealed PVC conduit of 25mm dia, medium Grade ISI marked and including suitable size new steel sunken boxes, laminated sheet cover plate for fixing of switches, sockets as required, flush to surface and including PVC insulated unsheathed 1.5 Sqmm copper conductor cable FRLSH connected to common earth dooly complete including cutting, chasing and making good disturbed surfaces of walls, floors etc. to match with existing surfaces, complete all as specified and directed.

All as per serial item No. 101..00 here-in-above but for one bell / buzzer point, controlled by one other switch or independent one bell switch.

All as per serial item No. 101.00 here-in-above but for one 3/5 pin socket outlet, 6 Amps on independent board.

All as per serial item No. 101.00 here-in-above but wire size 2.5 Sqmm to controlled the 3/5 Pin 5/15 Amps socket outlet on independent board and providing earth continuity wire using PVC insulated, FRLSH 1100 volts grade unsheathed single core multistranded copper conductor cable of size 2.5 Sqmm.

All as per serial item No. 101.00 here-in-above but for 3 pin socket outlet 5 Amps on same board.

All as per serial item No. 101.00 here-in-above but one light/ fan point, controlled by two way switch.

S&F switch piano, flush type, single pole, one way, 5 Amps, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5 Amps, complete all as specified and directed.

S&F switch piano, flush type, single pole, one way, 15 Amps, complete all as specified and directed.

S&F socket outlet, 2 in 1, 3 pin, 5 and 15 Amps, flush type, complete all as specified and directed.

S&F bell push, flush type, 5 Amps, complete all as specified and directed.

S&F switch piano, flush type, single pole, two way, 5 Amps, complete all as specified and directed.

S&F ceiling rose, 3 terminal, PVC / polycarbonet, isolated body, complete all as specified and direcetd.

S&F electronic fan regulator, 2 Module, flush type, 240 Volt, flush type, suitable for 1200/1400mm sweep ceiling fan, complete all as specified and direcetd.

S&F bell, ding dong type, AC, 230 volts, single pole, complete all as specified and directed.

S&F in replacement 22 Watt LED light fitting, 230 Volts, high quality LED batten with aluminum extrusion housing with PC diffuser, CRI > 80, efficacy : 120 Lm/W, IP-20 complete including connecting up with flexible copper wire of suitable size from ceiling rose to LED, complete all as specified and directed.

S&F in replacement LED light fitting mirror type with high out put diffuser, 2 feet, 10/12 Watt, 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, with CRI >, 80 efficacy : 100 Lm/W , IP-20, complete all as specified and direcetd.

S&F in replacement LED light fitting with high out put diffuser, 1 feet, 5 Watt, 220 V, AC, decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size, with CRI >, 80 efficacy : 100 Lm/W , IP-20, complete all as specified and direcetd.

S&F ceiling fan complete with blades, down rod with remote control opetated and accessories, 230 Volts, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE Five star rated with brushless direct current (BLDC) motor, complete all as specified and directed.

S&F in replacement LED bulk head (6500K) fitting of 10 Watt with CRI >, 80 efficacy : 120 Lm/W , IP-20, surface mounting type extruded aluminium body with diffuser, complete all as specified and directed.

S&F in replacement building security LED light 45 Watt, 230 Volts AC (110 Ln/W), AC, enegry saving long life, made up pressure die cast aluminum housing with separate driver, compartment toughened glass having efficacy with IP-66 complete alongwith suitable size bracket, nuts, bolts and clamps, complete all as specified and directed.

Taking down ceiling / exhaust fan, ceiling cable end, dismantling blades and removing fan and blades to and deposit to MES store or handover to unit MES NCO for kept in safe custody, complete all as specified and direcetd.

M&L for repair of ceiling fan / exhaust fan of any make, size and capacity with oiling, greasing after cleaning slot, overhauling & replacement of defective spare part, split pin, nuts, bolts, washers etc. The ceiling fan to be completed for ready smooth functioning without any noise including spray painting with enammeled paint with the help of spray gun etc, complete all as specified and directed.

S&F exhaust fan, heavy duty, steel body, copper windind, double bearing, AC, single phase, size 300mm sweep, 4 blades with iron frame and iron louver and connection, complete all as specified and directed.

S&F PVC body air freshner fan, copper winded, AC, single phase, size 150mm sweep with louver including making necessary hole for fixing of fan, complete all as specified and directed.

Hanging / fixing only ceiling fan and connecting up and including provision of cable from ceiling rose or connector to fan obtained from serial item No. 122.00 here-in-above, complete all as specified and direcetd.

M&L for earthing complete with galvanized steel earth plate electrode of size 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25 mtr deep below ground level) with top edge of the plate not less than 1.5 mtr below normal ground level, connected to earth plate with GI wire of 4mm dia by means of nuts, bolts and washers, check nuts of galvanized iron or steel including 15mm dia GI pipe light grade upto 1.5 mtr below GL for protection pipe, excavation and earth work, charcoal dust, common salt, PCC 1:3:6 type C-1 chamber with cover and RCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregates), reinforced with 6mm dia round bars @ 75mm c/c both way with MS handle 12mm dia, PGI funnel and wire mesh all as shown in electrical plate No. 3 of SSR Part-I, connected to earthing test point terminal including testing on completion, complete all as specified and directed.

S&F sheet metal VTPN DB, suitable for 125 Amps MCCB, double door, 04 Way (optimum F1+12) with metal door, 415 Volts grade, IP-42 Protection Grade, fixed/ flush to wall and connections should be provide with necessary reducer lugs and making good disturbed surface to match with existing surfaces, complete all as specified and directed.

S&F MCCB 4 Pole, 415 Volts, adjustable type, 125 Amps with breaking capacity, 16 KA, complete all as specified and directed.

S&F in replacement SPN sheet metal steel powder coated distribution board for MCBs fitted with bus bar neutral link earth bar and din rail suitable for use on 240 Volts, 50Hz, double door, DB system, 8 way, complete all as specified and directed.

S&F in replacement of single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB of 20 Amps, 240 Volt, complete all as specified and directed.

S&F MCB SPN 40 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed.

S&F MCB SP, 6 to 32 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed.

S&F MCB SP, 63 Amps, 240 Volts, repturing capacity 10 KA, 'C' Series, complete all as specified and directed.

Taking down serviceable/ unserviceable electric meter including meter box from existing position carefully for refixing including making good to disturbed surfaces to match with existing surfaces, complete all as specified and directed.

M&L for submain wiring with two run single core 6.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit/ PVC casing & caping, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 6.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 6.0 Sqmm and one run 6.0 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

M&L for submain wiring with two run single core 4.0 Sqmm FRLSH copper conductor cable PVC insulated, unsheathed, 1100 Volts grade including 25mm dia in PVC concealed conduit/ PVC casing & caping, medium grade, ISI marked with all accessories such as Tees, elbows, junction boxes etc. as required, fixed on wall alongwith one run of 4.0 Sqmm single core PVC FRLSH insulated unsheathed copper conductor cable as continuous earth wire and connecting to existing main switch board / distribution board, complete including taking down unserviceable submain of any type/size and testing on completion, complete all as specified and directed. Note :- Two run of 4.0 Sqmm and one run 4.0 Sqmm cable and one run of PVC conduit / PVC casing & caping shall be measured as one unit/RM.

Supply, laying/ fixing and testing XLPE insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 Sqmm 3.5 Core, as in trenches/ floor/ pole/ GI pipe complete including cutting/ chasing to any surface and making good to the disturbed surface to match with existing surfaces and including taking out/ down existing cable, complete all as specified and directed.

Excavation in trenches in any type of soil, not exc 1.5 mtr deep and not exc 1.5 mtr wide for laying of under ground cable, pipe, electric pole and getting out, complete all as specified and directed.

Returning, filling in including spreading, leveling and well ramming in layers not exc 25cm in thick, complete all as specified and directed.

Removing excavated material to a distance not exc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point, complete all as specified and directed.

Supply and laying 20 to 100mm dia DWC pipe (double wall corruguated) HDPE, PE-100, PN-4, confirming to IS:14930 (Part-II) alongwith necessary snap fit coupler for inter connection and size suitable protection for LT cable, complete all as specified and directed. Note :- Dia of DWC pipe shall be decided by EIC as per site requirement and cost for the same shall be deemed to include in the quoted rates.

KUMAR CONSTRUCTION CO (BID ID -3499894)

TULSI RAINA AND SONS (BID ID -3493547)