Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹1.2 CrAdmitted-Finance RAJENDRA NAGAR KUNWAR SINGH ROAD NEAR SRIJAN APARTMENT NEW ULIDIH MANGO JAMSHEDPUR EAST SINGHBHUM PIN 8310102 | 8310102 | ₹1.2 Cr | L1 | Admitted-Finance |
| 2 | Rejected-Technical | - | - | Rejected-Technical decision |
| Sl No | Description | Qty | Unit | ABHISHEK ENTERPRISES L1 |
|---|---|---|---|---|
| 1.00 | Application of approved make anti corrosive treatment to rusted/exposed steel bars after manually cleaning and with rust remover of single component of Sika Rust off 100/ Fosroc Reebaklens RR/Dr. Fixit Rust remover or equivalent on exposed bar and leave for 24 hour to dry and then remove the loose rust particles by brush. After removal of loose rust or dust by cloth and apply a preventive coating (Two component Epoxy/cement based) of- Sikatop Armatec 108 plus, Fosroc Nitozinc Primer, MYK floarm coat ZP or equivalent on exposed reinforcement before rendering further course and allowed to get dried. This application is inclusive of all matarials, tools, tackles and workmen. Treatment of the reinforcement to be measured as per the actual chipped off area.
Note: The application of chemicals should be as per manufacturer data sheet or as per direction of Engineer in charge. | 200 | M2 | 4,310 ₹8,62,000 Lowest |
| 2.00 | Exposing damaged concrete :- Chipping existing loose damaged concretefrom RCC membres of all affected columns, beams and slabs at terraceslab viz. Terrace floor slabs, staircas rooms, Lift machin room, OG WTetc. beyod main r/f carefully with chiesel and hammer.(icl. disposal of debris) | 783 | M2 | 810 ₹6,34,230 Lowest |
| 3.00 | Providing and applying bonding agent (Epoxy based two component) of Sikadur 31in, Fosroc Nitobond AR, Dr. Fixit Epoxy bonding agent or any approved chemical over the Concrete surface including all materials, tools and workmen complete. Note: The application of chemicals should be as per manufacturer data sheet or as per Engineer incharge. | 500 | M2 | 4,900 ₹24,50,000 Lowest |
| 4.00 | Sealing of expansion joints of roof, wall etc. shall be executed as per manufacturers specifications with maximum 25mm x 12mm groove with Dr fixit pidiseal PS 41G, MASTERFLEX700i. This to be applied asper manufacturer specifications and finishing the same. | 120 | M | 5,700 ₹6,84,000 Lowest |
| 5.00 | Epoxy PO Grouting by Injection Slurry : 1. Carrying out pressuregrouting by injection of Epoxy PO slurry with as specifiedby manufacturer chemical compound of approved make to Epoxy PO Grout afteridentifying the leakage area, making holes approx 80-120 mm deep Drilling inZig-Zag(staggerred) fashion. | 50 | KG | 9,500 ₹4,75,000 Lowest |
| 6.00 | Providing and applying Repairing mortar (One component-polymer modified) of Sika Top 122 Monotop, Fosroc Renderoc SP-40, MYK refearm repairing mortar or any equivalent composition over the treated concrete surface. Rate are including for finishing of surface, materials, tools, workmen and curing to be done for minimum 14 days by water or by use of curing compound. Minium thickness: 8-10mm, The repair mortar shall exceed compressive strength of 35 N/MM2 at 7 day and 55 N/MM2 at 14 days (According to ASTM C-109) Note: The application and preparation of mortar should be as per manufacturer data sheet or as per Engineer incharge. | 1,400 | M2 | 1,110 ₹15,54,000 Lowest |
| 7.00 | Pressure Grouting by Injection Slurry : 1. Carrying out pressuregrouting by injection of cement slurry with 3% by weight or as specifiedby manufacturer chemical compound of approved make to cement afteridentifying the leakage area, making holes approx 40-80 mm deep inZig-Zag(staggerred) fashion with maximum spacing upto 300 mm, cutting""""""""V"""""""" grooves, fixing 15mm dia GS/PVC threaded nozzle or NRV havinga minimum thickness of 16 gauge. 1.Fix Nozzle in the hole 2. CementSlurry to be madeby adding 3% by weight of cement or as permanufacturer Specifications water proofing | 1,800 | NOS | 520 ₹9,36,000 Lowest |
| 8.00 | Providing & erecting full scaffolding ma
item long text :providing & erecting hiring,scaffold material(from 3m to 6mheight)applicable standard
(all)-anchor ties ,base plate ,board (all)caster wheel,coupler ,cuplock loose spigot ,cuplock spigot pin,ginwheels ,head plates,horizontal galvanised cuplock ,jacks for cuplock,ladder ,reveal ties,rope,toe boards ,tube ,tubes vergalvanised
cuplockincluded transportation to site from
stacking yard and shifting andstacking of scaffolding on per cubic mtr. on job basis. | 250 | M3 | 980 ₹2,45,000 Lowest |
| 9.00 | Supply and application of SikaTop Seal 107 # acrylic based, ready to use,cementitious, waterproof coating with fiber glass net onto the prepared surface in a continuous film on the Tunnel slab area, taking the coating over the vertical surfaces on to the floor and over the coving on to the wall(before tiling) to at least 300mm above the final finished flevel.The coating shall also be continued on to the inner surfaces of the pipepenetration holes. Two coats shall be applied. After that providing a 15mm thick cement-sand plaster(1:4) on the waterproof coating by mixing an integral waterproofing compound, Plastocrete | 1,400 | M2 | 1,600 ₹22,40,000 Lowest |
| 10.00 | Cleaning for Tunnel Area water/soil/ | 700 | M2 | 2,200 ₹15,40,000 Lowest |
Tender Value
Refer Docs
EMD Value
₹2 L
Closing Date
28 Apr 2023, 5:00 pmClosed
Executive Engineer, Irrigation Division Galudih.
Executive Engineer, Irrigation Division Galudih.
Repair and Maintenance of Aqueduct at 29.90 Km of GRMC.
2023_WRD_69852_1
WRD/IRRDIVGAL/NIQ-01/2023-24
Open Tender
Civil Works
EOI
180 days
Ghatsila, East Singhbhum
Please refer Tender documents.
8 documents required · 8 mandatory
₹0
₹2 L
Yes
30 May 2023
20 Apr 2023
2 May 2023
20 Apr 2023
28 Apr 2023
20 Apr 2023
Amount
Application of approved make anti corrosive treatment to rusted/exposed steel bars after manually cleaning and with rust remover of single component of Sika Rust off 100/ Fosroc Reebaklens RR/Dr. Fixit Rust remover or equivalent on exposed bar and leave for 24 hour to dry and then remove the loose rust particles by brush. After removal of loose rust or dust by cloth and apply a preventive coating (Two component Epoxy/cement based) of- Sikatop Armatec 108 plus, Fosroc Nitozinc Primer, MYK floarm coat ZP or equivalent on exposed reinforcement before rendering further course and allowed to get dried. This application is inclusive of all matarials, tools, tackles and workmen. Treatment of the reinforcement to be measured as per the actual chipped off area. Note: The application of chemicals should be as per manufacturer data sheet or as per direction of Engineer in charge.
Exposing damaged concrete :- Chipping existing loose damaged concretefrom RCC membres of all affected columns, beams and slabs at terraceslab viz. Terrace floor slabs, staircas rooms, Lift machin room, OG WTetc. beyod main r/f carefully with chiesel and hammer.(icl. disposal of debris)
Providing and applying bonding agent (Epoxy based two component) of Sikadur 31in, Fosroc Nitobond AR, Dr. Fixit Epoxy bonding agent or any approved chemical over the Concrete surface including all materials, tools and workmen complete. Note: The application of chemicals should be as per manufacturer data sheet or as per Engineer incharge.
Sealing of expansion joints of roof, wall etc. shall be executed as per manufacturers specifications with maximum 25mm x 12mm groove with Dr fixit pidiseal PS 41G, MASTERFLEX700i. This to be applied asper manufacturer specifications and finishing the same.
Epoxy PO Grouting by Injection Slurry : 1. Carrying out pressuregrouting by injection of Epoxy PO slurry with as specifiedby manufacturer chemical compound of approved make to Epoxy PO Grout afteridentifying the leakage area, making holes approx 80-120 mm deep Drilling inZig-Zag(staggerred) fashion.
Providing and applying Repairing mortar (One component-polymer modified) of Sika Top 122 Monotop, Fosroc Renderoc SP-40, MYK refearm repairing mortar or any equivalent composition over the treated concrete surface. Rate are including for finishing of surface, materials, tools, workmen and curing to be done for minimum 14 days by water or by use of curing compound. Minium thickness: 8-10mm, The repair mortar shall exceed compressive strength of 35 N/MM2 at 7 day and 55 N/MM2 at 14 days (According to ASTM C-109) Note: The application and preparation of mortar should be as per manufacturer data sheet or as per Engineer incharge.
Pressure Grouting by Injection Slurry : 1. Carrying out pressuregrouting by injection of cement slurry with 3% by weight or as specifiedby manufacturer chemical compound of approved make to cement afteridentifying the leakage area, making holes approx 40-80 mm deep inZig-Zag(staggerred) fashion with maximum spacing upto 300 mm, cutting""""""""V"""""""" grooves, fixing 15mm dia GS/PVC threaded nozzle or NRV havinga minimum thickness of 16 gauge. 1.Fix Nozzle in the hole 2. CementSlurry to be madeby adding 3% by weight of cement or as permanufacturer Specifications water proofing
Providing & erecting full scaffolding ma item long text :providing & erecting hiring,scaffold material(from 3m to 6mheight)applicable standard (all)-anchor ties ,base plate ,board (all)caster wheel,coupler ,cuplock loose spigot ,cuplock spigot pin,ginwheels ,head plates,horizontal galvanised cuplock ,jacks for cuplock,ladder ,reveal ties,rope,toe boards ,tube ,tubes vergalvanised cuplockincluded transportation to site from stacking yard and shifting andstacking of scaffolding on per cubic mtr. on job basis.
Supply and application of SikaTop Seal 107 # acrylic based, ready to use,cementitious, waterproof coating with fiber glass net onto the prepared surface in a continuous film on the Tunnel slab area, taking the coating over the vertical surfaces on to the floor and over the coving on to the wall(before tiling) to at least 300mm above the final finished flevel.The coating shall also be continued on to the inner surfaces of the pipepenetration holes. Two coats shall be applied. After that providing a 15mm thick cement-sand plaster(1:4) on the waterproof coating by mixing an integral waterproofing compound, Plastocrete
Cleaning for Tunnel Area water/soil/
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .