Provision of certain LBW , Special repair and other sanctioned works at MIRC Ahmednagar

Amount

Soakage well 3.6 m dia and 4.50 m deep below inlet pipe level (depth from inlet pipe to ground level 45 cm) including excavation and earth work in any type of soil, foundation PCC 1:3:6 , type C2,walls of honey combed brick work in CM 1:3, top ring in cement concrete M-25, including intercepting chamber and screen chamber made of Brick masonary in CM, complete filled with brick bats, interconnecting pipes of RCC/DWC , RCC cover slab in cement concrete M25 with SFRC manhole cover factory made ISI marked conforming to IS 12592 fixed in angle iron frame, SWG single junction inlet filling around slab in slopes and disposal of surplus soils to a distance exceeding 50 m but not exceeding 100 m complete all as specified and shown in drawing no.CEPZ/2004/TD/8 Sheet No. 1/1, dated 30 Jun 2004

All as per serial item No. 1 here-in-before but of size 3.6 mtr dia x 6.00 mtr deep etc

All as per serial item No. 1 here-in-before but of size 1.80 mtr dia x 3.00 mtr deep etc

All as per serial item No. 1 here-in-before but of size 1.20 mtr dia x 3.00 mtr deep etc

Septic tank including inlet & outlet chambers for 30 users, in brickwork construction (with top of slab at ground level) including necessary excavation and earth work in any type of soil and disposal of surplus soil to a distance not exc 50 m, bricks work in sub class 'B' bricks built in CM (1:4), RCC 1:2:4, type B1 as in slab including RCC manhole covers factory made ISI marked conforming to IS 12592 with angle iron frame 100 mm bore cast iron sand cast vent pipes with cast iron cowls complete all as specified and shown in drawing No. CEPZ/88/TD/17M dated 01 Oct 88, sheet 1/4 to 4/4

Surfaces excavation not exc 30 cm deep and average 15 cm deep and getting out in soft /loose soil complete all as specified and directed.

Excavating over areas, n exc 1.5 m deep and getting out in any type of soil etc complete all as specified and directed.

Excavation in trenches nexc 1.5 mtr deep & 1.5mtr wide & nexc 10 Sqm on plan & getting out in any type of soil (avarage of soft/ loose and hard/ dense soil) complete all as specified and directed.

Returning, filling in (soil) including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick in any type of soil all as specified and directed.

Sand filling under floors or in foundations including watering and consolidation in layers complete all as specified and directed.

Removing excavated material (soil) to a distance n exc 50m and deposited where directed at a level n exc 1.5m above the starting point complete all as specified and directed.

Moorum / red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete as specified and directed.

Hard core of broken stone/boulders of gauge n exc 63 mm deposited spreed and leveled in layers n exc 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Demolition of cement concrete any description and any position not otherwise specifically provided (below or above ground level) complete all as specified and directed.

Cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate as in sides locking of interlocking tiles and in holdfasts etc. complete all as specified and directed.

Plain cement concrete 1:4:8, type D-2 using 40mm graded stone aggregate as in foundation filling and mass concrete etc. complete all as specified and directed.

Plain cement concrete 1:7:12, type E-2 using 40 mm graded brick aggregate as in filling of sunken portion complete all as specified and directed.

Plain cement concrete 1:3:6, type C1, using 20 mm graded stone aggregate as in coping, bond stones , bands and similar items including weathering, slightly rounded or chamfered angle and throating etc. complete all as specified and directed.

Reinforced cement concrete M-25 (design mix) using 20 mm graded crushed stone aggregate as in foundation, basement slabs, foundation slabs etc. complete all as specified and directed.

Reinforced cement concrete M-25 (design mix) using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5 m span etc. complete all as specified and directed.

Reinforced cement concrete M-25 (design mix) as in shelves slopped roofs with 20 mm thick plaster in cement mortar in CM 1:4 mixed with water prrofing compound and the like complete all as specified and directed.

Supply only integral water proofing compound, ISI marked complete all as specified and directed.

Brick work with fly ash 'B' bricks, straight or curved on plan to any radius in half brick thick walls, built in cement mortar 1:4, complete all as specified and directed.

Brickwork with fly ash bricks straight or curved on plan exc 6 m mean radius built in cment mortar 1:6 etc complete

Walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted built in CM 1:6 complete all as specified and directed.

Extra over stone walling for hamer dressing to face stones and dressing of fare beds and joints as specified of random rubble walling uncoursed or brought upto course with maximum depression on face upto 40 mm granite or trap stone complete all as specified and directed.

Use and waste of form work for column footings and sides of plinth beam, bands, cantilevers, bressumers,lintel over 1.5 m span and columns complete all as specified and direted..

Form work to soffits of suspended slabs such as roof slab, floor slab, shelves etc for fair finished surface complete all as specified and directed

Formwork to sides and soffits of floor or roof beam, beam hauchings, girders, bressum-mers, lintels cantilevers, shelves including supports complete all as specified.

Use and waste of form work for sides of concrete slabs, shelves etc exc 10 cm but not exc 20 cm wide complete all as specified and dierected.

Taking down shutters of any description exc 1 sqm and not exc 2 sqm each and removing to store or as directed complete all as specified and diercted.

35 mm thick second class hardwood, factory made , plain framed, panelled shutter with panel of 9 mm thick BWP plywood bonded with high quality phenol formal dehyde synthetic resin adhesive confirming toIS-710. the size of rails & style shall be as per IS -1003 (Part I) kiln seasoned as per IS -1141 & chemically pressure treated as per IS-401 complete all as specified & directed

Mild steel barrel tower bolt 200 mm long stove enamelled black with bright bolt and fixed complete all as specified and directed.

Mild steel sliding door bolts clip type 250 mm long stove enamelled black with bright bolt not less than 16 mm dia with & including a minimum of 6 bolts & nuts four on bolt plate and two on staple plate complete all as specified & directed.

Mild steel butt hinzes100 mm long medium weight cold rolled, ISI marked fixed complete all as specified and directed.

Continuous (Piano) hinges, mild steel, bright finished or electro galvanized, width of flaps (when open) 30 mm, fixed with screws complete all as specified and directed.

MS pressed handles of size 125 mm oval type stove enamelled black, fixed complete all as specified and directed.

Galvanized mild steel wire cloth of 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples or with wooden beads, screws and nuts botls etc. complete all as specified and directed.

Mild steel angle iron posts and struts as in fencing, embeded in cement concrete, cutting to shape as directed, drilling holes, notching for wire, etc, flat iron fillets (for securing wire mesh etc.) including all necessary drilling bolting, or revetting etc and similar work conforming Fe-290 Gde E-165 complete all as specified and directed.

Mild steel framed works such as grills, gates, gratings etc with end of bars shouldered and riveted or forged into spikes, framed guard bars, barred iron doors, ladders and framed nad hung as gates inluding pintel hinges stops ,hand made sliding bolt etc similar work conforming to Fe Gde E 165 etc completed.

12mm dia mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, not exc 5cm long complete all as specified and directed.

TMT bars 10 mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified

TMT bars 6 to 8 mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified

TMT bars 5 mm dia and over upto and including 10mm dia in stirrups, spacers and binders and binding with and including mild steel wire(annealed) not less than 0.90mm dia as in stirrups, complete all as specified and directed.

Supply only chain link MS galvanised fencing any size or type or dia complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of strandards, rails, straining bolts, etc. Including provision of binding wire complete all as specified and directed.

Mild steel round bars of 8 mm dia for line bars to support chain link fencing , cut to length, bent to shape required including cranking, bending nad binding as directed, conforming to Fe-410-0 complete all as specified and directed.

Galvanised 2 strand, steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacing and straining and fixing to any type of standard rails, straining bolts, including, securing or tying at crossing with and provn of galvanised mild steel wire, staples or steel pins, etc complete all as specified and directed. (each line of wire to be measured seperately).

Steel window or ventilators fixed type made of 'Z' Section with glazing bar including lugs/ holdfasts etc. complete all as specified and directed

Factory made steel windows with side hung shutter including projecting type hinges with steel handle, and steel peg stay complete without glazing bar with & incl fixing flat iron for securing wire mesh complete all as specified and directed.

Pressed steel frames for doors with one or more rebates incl necessary fixing lugs, hinges, lock strike plate etc complete of size of frame 125 mm X 60 mm filled with PCC 1:3:6 type C 0 complete all as specified and directed.

GI wire netting 0.90 mm dia and 12mm mesh lathing to walls incelling beams etc including all laps cutting and waste including making V groove in crack portion and filled with cement mortar 1:2 etc complete all as specified and directed.

19/20 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work in cup board shutters, partitions, shelves and similar work fixed in repairs, complete all as specified and directed.

100 mm thick PCC 1:2:4, type B-2 (by using 40 mm graded aggregate) as in flooring including necessary form work etc where required complete all as specified and directed.

50 mm thick PCC 1:3:6, type C2 using 40 mm graded stone aggregate as in plinth protection with joints grouted in cement mortor 1:3, finishing the surfaces even & smooth without using extra cement complete all as specified and directed.

75 mm thick PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in a sub base of floors complete all as specified and directed

25 mm thick plain cement concrete 1:2:4, type B 0, using 12.5 mm graded stone aggregate mixed with WPC as in bedding in sunken portions etc complete all as specified and directed.

Dismantling floor .hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and removing the rubbish off the premises. complete all as specified and directed.

Glazed ceramic tiles (plain or printed) of each tile of size 300x200x7 mm thick as on vertical surfaces like dado, skirting etc jointed in neat cement slurry and pointed in coloured cement laid over and including 10 mm cement plaster backing in CM 1:4 complete all as specified and directed.

Non-skid coloured ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm, as in floors etc. laid over and including 15 mm thick screed bed in CM 1:6 and 25 mm thick PCC 1:2:4, type B0, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles complete all as specified and directed.

Vitrified Ceramic tiles (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over and including 15 mm thick cement screed bedding in CM 1:6 complete all as specified and as directed.

All as per serial item No. 61 here-in-before but on vertical surfaces as in skiting /dado of size as required at site all as specified and directed.

Precast cement concrete interlocking tiles (glossy finish/ rubber mat finish) of 60 mm thick ,hydraulically pressed cemented tiles of grey colour with pigments,(glossy finish/ rubber mat finish) factory made, M-35 grade conforming to IS-15658-2006, as in floor laid over & including 25 mm thick sand cusion and including filling of interstices with fine sand complete all as specified and as directed by Engineer-in-charge. Note Size, shape & pattern of tiles shall be as decided.

Granite (for cooking platform) tiles 15 to 18 mm thick machine cut, bedded and jointed with gray cement and pointed with white cement mixed with admixture of pigment to match the shade of granite stone including grinding and polishing laid over and including 20 mm thick screed base in CM 1:6 complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls etc., including raking out joints, hacking for key, scrubbing down with water etc., complete all as specified and as directed.

Rendering 15 mm thick in cement mortar 1:4, mixed with water proofing compound as per manufacturer instructions, on brick or concrete surfaces, trowelled to even and smooth finish without using extra cement complete all as specified. ( WPC shall be measered and paid for separately).

All as per srl item No. here-in-before but 10 mm thick in CM 1:6 finishing even and smooth without using extra cement.

5 mm thick cement plastering in cement mortar 1:4 on fair faces of concrete ceiling surfaces finished even & smooth without using extra cement complete all as specified and directed.

Keyed pointing in CM 1:3 to randam rubble masonry including racking out joints etc complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of cement base paint over a coat of alkali resistent primer complete all as specified and directed.

Perparation of newly plastered surfaces of ceilings and applying three coats of white wash complete all as specified and directed.

Preparation of newly plastered surfaces of walls and applying two coats of oil bound distemper over a coat of primer and two coats of altek putty complete all as specified and directed.

Preparation of old decorated surfaces of walls by washing, rubbing down and stopping of distempered surfaces and applying a coats of distemper oil emulsion complete all as specified and directed.

Preparing old painted surfaces by washing, rubbing down and stopping of painted surfaces and applying a coat of cement base paint on surfaces of walls complete all as specified and directed.

20 mm thick cement plastering in cement morter (1:4) using water proofing compound @ 3% by weight of cement & applying evenly a tack coat of industrial bitumen 85/25 at the rate of 1.2kg per sq.m after preparation of surfaces complete all as specified and directed.

APP polythene membrate minimum weight 3kg/sqm and minimum 3 mm thick reinforced with polyster non wooven fabric weight not less than 150 gms/sqm including primer for surfaces by forced application complete all as specified and directed.

Applying two coats of aluminium paint over APP membrane laid over roof complete all as specified and directed.

Hacking out of old broken glass (any thickness ,size quality or description) from wooden / metal frames including punching or drilling out old glazing pins/spring clips complete all as specified and directed.

Sheet glass 3 mm thick, plain, ordinary quality & glazing with oil putty in square n.exc 0.50 sqm in each pane complete all as specified and directed.

Frosted or figured glass, pin headed type 3 mm thick & glazing with oil putty in square n.exc 0.50 sqm in each pane of metal frame complete all as specified & directed.

Preparing new surface of wood and wood based material of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparing new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of pink primer complete all as specified and directed.

Preparation of old painted steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying one coats of synthetic enamel paint complete all as specified and directed..

Taking up or down GI steel tubing and connections for 15 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down GI steel tubing and connections for 20 mm bore pipe including cleaning for re-fixing or removal to store complete all as specified and directed.

15 mm bore galvanised iron tubing, medium grade, ISI marked with all fittings and concealed in walls or laid in floors fixed complete all as specified and directed.

20 mm bore galvanised iron tubing, medium grade, ISI marked with all fittings and concealed in walls or laid in floors fixed complete all as specified and directed.

15 mm bore bib taps,chromium plated, with Capstan head, screwed down screwed for iron pipe or for brass ferrule fixed complete all as specified and diercted.

Vitreous China wash hand basin White of 580 x 450 mm size flat back including cutting for and pinning in ends of brackets, including waste coupling CP, PVC waste pipe and PVC connection 15mm dia, 600mm long with brass check nuts and brackets (excluding pillar tap), fixed complete all as specified & directed.

15 mm bore pillar taps, chromium plated, screwed down high pressure, with or without letteres `Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe,fixed in repairs complete all as specified and directed.

Brass CP wall mixer for mixing hot and cold water and bend for connecting to shower screwed down for iron pipe 15 mm bore and fixed in repairs complete all as specified and directed.

Stop valves 20 mm bore, cast copper alloy, chromium plated, screwed both ends for iron pipe, fixed in repairs complete all as specified and diercted.

Brass chromium plated shower rose 125 mm size with or without swivel joints, including fixing to steel pipe or union complete all as specified and directed.

Aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges including brackets, fixed with screws complete all as specified and directed.

Vitreous china wash down water closet pan (pedestal pattern) white (including fixing bolts,and flush pipe, fixed in repairs complete all as specified and directed.

Vitreous china bowl urinal, flat back coloured of size 465x355x265mm, white (Minimum) with grating and union for discharge pipe, Spreader, including providing and fixing plugs, bedding urinals against the wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around the urinal back in cement, including fixing automatic flushing cistern with brackets, PVC flush pipe 32 mm bore complete all as specified and directed.

10 ltr capacity PVC coloured flushing cistern high/low including ball valve, bracket including PVC connection 15mm dia and 600mm inlet, outlet PVC pipe, complete all as specified and directed.

Angle stop cock fancy type, brass chromium plated with CP wall cap 15 mm bore screwed down screwed for iron pipe or for brass ferrule, fixed in repairs complete all as specified and diercted.

PVC (SWG) soil, waste and vent pipe, centrifugal type 75 mm bore, sand cast, in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified and directed.

PVC (SWG) soil, waste and vent pipe, centrifugal type 100 mm bore, sand cast, in any length, with or without ears, with lead joints, fixed to walls with and including stack clamps, nuts , bolts etc. and making necessary connections complete all as specified and directed.

PVC (SWG) branch pieces double, (equal or u n equal) ordinary or inverted(spigot or socket type) with parralled branches, suitable for 100 mm bore pipe, as in repairs, fitted with oval access doors jointed with cement solvent complete all as specified and directed

PVC (SWG) floor trap centrifugal type with CP grating including jointing to waste pipe in run lead dia of outlet 75 mm including cutting floor and making good to match with existing surface in PCC 1:2:4, fixed in repairs complete all as specified and directed.

75 mm dia PVC floor trap plain with PVC gratings including jointing with cement solvent and setting in and including PCC 1:2:4, type B1 complete all as specified and directed.

PVC (SWG) cowl suitable for 75 mm bore pipe, fixed complete all as specified and directed.

Reinforced concrete pipes of approved make , 150 mm bore, class NP3, laid and jointed complete with collars in cement joint complete all as specified & directed.

Concrete bed to drain pipes 150 mm bore in PCC 1:4:8, type D-2, using 40 mm graded aggregate including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed.

40 mm dia galvanised iron pipes medium grade as in spouts 50 cm long, fixed in cement mortar 1:4 complete all as specified and directed.

Preparation of old painted surfaces of wood and wood based material of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

Applying three coats of brush bond acrylic based cementitious material of approved quality for sunken portion treatment all as per manufacturer instruction and providing 200 mm micron thick polythene film over 85/25 grade bitumen layer @ 0.5 kg /Sqm complete all as specified and directed.

Galvanised mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperature 1.18 mm and fixed with tinned tacks or galvanised wire staples fixed in repairs complete all as specified and directed.

Vinod Enterprises

AMAR CONSTRUCTION

MS. A.S. CONSTRUCTION

M/s.Abhay Kulkarni and Associates

M/s AG PATHAN

M/s. N D Karande