SPECIAL REPAIRS TO BUILDING NO ABNS 6 C 2 RECORDS THE MLIRC AND PROVN OF 16 X BIO TOILETS AT A AND B FIRING RANGE AT MLIRC BELGAUM UNDER GE BELGAUM.

Amount

Taking down chowkhat with shutter (without taking off shutter from the frame) of area n exc 1.5 Sqm each and taken as credit complete all as specified and as directed.

Taking down chowkhat with shutter (without taking off shutter from the frame) of area exc 1.5 Sqm and not exc 4.0 sqm each and taken as credit complete all as specified and as directed.

Dismantling single layer Mangalore pattern or similar tiles in roofing and removing rubbish off the premises and old unserviceable tiles taken as credit complete. all as specified and as directed.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thick above or below ground level including removal of debris off the premises complete all as specified and as directed.

Supply and fix in repairs Second class hardwood clean sawn timber framed and fixed scantlings and replace old and decayed timber (including piecing, scarfing, etc., of old and new timbers if required) and removing defective portions etc including dismantling timber scantlings 40 sq. cm and over in section, in any position, unframed work, etc and taken as credit complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6, including demolition of old unserviceable PCC solid block masonry built in cement mortar pillars, etc. in any position below or above ground level etc and removal of debris off the premises complete all as specified and as directed.

Material and labour for Providing PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in floor finishes, 50 mm thick including necessary steel form work complete all as specified and as directed.

Material and labour for Providing PCC 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection 75 mm thick finished even and smooth without using extra cement including necessary steel form work complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in cement concrete in surface channel and drain including necessary steel formwork complete all as specified and as directed.

Extra for forming fair finished drain or channel of 30cm inner girth in cement concrete using extra cement including forms moulds mitred / stopped end etc. complete all as specified and as directed.

Supply and fix Pre painted galvalume coated high tensile Georoof & JSW brand metal spanish tile roofing and profile steel sheet 0.50 mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws and washers completec all as specified and as directed.Note:(i)Make of Galvalume sheet:Tata Blue scope Ltd/JSW (Colouron)/Llyod (II) Measurement shall be taken flat as fixed without any allowance for laps, etc.

Supply and fix Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in pressed ridge cap, valley gutter fixed with self tapping screws etc, complete all as specified and as directed.Note:Make of Galvalume sheet:Tata Blue scope Ltd/JSW (Colouron)/Llyod

Material and labour for Providing and fixing False ceiling at all heights with semi perforated 12 mm thick Micro regular edged GRG (Glass Fibre With Reinforced Gypsum) False Ceiling tiles of Size 595 x 595 mm of approved texture, design and pattern having moisture content less than 2%, humidity resistance of 99%, NRC O.50 to 0.75 as per IS false ceiling 8225:1987, Non combustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter- locking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of main-T runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of secondary intermediate cross-T of size 15 x 32 mm of length 600mm to form grid module of size 600x 600mm, suspended ceiling using galvanized mild steel items (galvanizing@ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing complete all as specified and as directed.Note: Make: Diamond Ceilings (GRG Flase Ciling GRG Wall Panelling).

Supply and fix PVC (SWR) eaves gutter trapezoidal profile 150mm bore including pipe accessories PVC holder bats , bolts nuts etc and including dismantling of exsiting rain gutter of any description and taken as credit complete all as specified and as directed.Note : Make : Finolex/Supreme/Prince EURO.(ISI MARKED)

Material and labour for 4mm thick Aluminium Composite Panel comprising of a core containing not less than 70% non combustible mineral filling sandwiched between two skins of 0.5mm thick aluminium alloy PERALUMAN-100 (AlMg1-NS41), weight not less than 7.6 kg per sqm, complete with all necessary sub-structures, anchors, hardware and fittings to provide a total installation, fixed over and including aluminium section of size 35mmx25mmx2mm th and 1.00mx0.30m panel all as per manufacturers instructions, including dismantling old unserviceable panel board of any description and taken as credit complete all as specified and as directed. Note: (i)Measurement shall be taken flat as fixed without any allowance for laps, etc.(ii) Make: Alstrong/ Aludecor/ Alucobond/EURO

Supply and fix Rolled mild steel roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. Fe 410 -W (Gde E- 250) quality A complete all as specified and as directed.

Supply and fix Mild steel hand rails, half round or other steel section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts etc confirming to Fe-290 Gde E-165 complete all as specified and as directed.

Material and labour for Preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of zinc chrome red oxide primer complete all as specified and as directed.

Supply and fix Factory made Solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of Single Side Prelam PVC sheet used and stile & rails having one side feathered edge and on other side 10mm 90 degree bent edge,to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement suppling & fixing in the frame at site as per specification & drawing complete all as specified and as directed

Supply and fix PVC door frame of size 50mm X 47mm made out of 5mm thick wood grain printed PVC sheet & edges will be painted to match printed sheet, etc reinforced with MS square tube, supplying & fixing in opening complete all as specified and as directed.

Supply and fix Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and 4mm thick sheet glass ordinary quality , ground or obscured or frosted, on one side, and glazing with oil putty/ wooden beads in square n exc 0.5 Sqm in each pane including hacking out old broken glass panes (any thickness ,size ,quality or description ) from wooden frames or brick surrounds ,glazed with putty or fixed with beads etc. complete all as specified and as directed. Note: (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco . (iii) Make of Frosted glass :Saint gobain/Modi guard/Gold fish .

Material and labour for Aluminium anodised door standard section of size 64x38x1.4mm for frame and section size 47x25x2mm for vertical style section size 46.72x44.45x1.4mm for top and central rail section size95x44.45x2mm for bottom rail,section size 19x17.3x0.80mm for glazing clip for shutter including fabrication to required size and fixed with 5mm thick sheet frosted glass in top panel and 4mm thick aluminium composit panel board including fitting etc with door closer hydraulically regulated designation no :03 ,universal type suitable for door shutters of 61 to 80 kg weight ,aluminium anodised ,handle size 150 mm,Aluminium mortice lock ,vertical type size 100 mm , aluminium anodised floor door spring heavy duty etc complete all as specified and as directed. Note: (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco . (iii ) Make of Hydraclic door closer : Everite/Hardwyn(ISI MARKED) (iv) Make of mortice lock : Godrej/Harrison/Dhanraj (v) Make of Frosted glass :Saint gobain/Modi guard/Gold fish. (vi) Make of Aluminium composit panel :

Supply and fix Aluminium sliding window (Triple track), fabricated to required size with standard aluminium anodised sections, with bottom track of size 92 x 31.75 x 1.6mm, side and top frame of size 92 x 31.75 x 1.4mm, top and bottom shutter rail of size 39x17x1.4mm, outer style of size 39 x 17 x 1.4mm, interlock style of size 39 x 27 x 1.4mm, including two number of provision of 4mm sheet frosted glass for panels, one number powder coated MS wire mesh for panel including provision of all hardware fittings such as handles, locking arrangements, rubber gaskets, rollers, spring catchers etc. complete all as specified and as directed . Note : (i) Thickness of aluminium anodisation shall be of 15 microns . (ii) Make of aluminium anodised section : Jindal/Indal/Hindalco (iii) Make of frosted glass : Saint gobain/Modi guard/ Gold Fish .(iv) Make of MS wire mesh : (v) Thickness of powder coating shall not be less than 50 microns

Supply and fix Premium quality vitrified tile of 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry and pointed in white or colored cement to match including screed bed or bedding layers 15 mm thick in cement mortar (1:6) for laying floor finishes including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed. complete all as specified and as directed.Note :Make of Ceramic Tile :Johnson/Somany/Naveen

Supply and fix Premium quality Glazed ceramic tile of size 350x450 x 7mm thick on dado and skirting , set and jointed in neat cement slurry and pointed in white or colored cement to match including 10 mm thick rendering with rough finished in cement mortar 1:4 to received tile including dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) removing, rubbish off the premises all as specified and directed. etc, complete all as specified and as directed.Note :Make of Glazed Ceramic Tile :Johnson/Somany/Naveen

Material and labour for Premium quality, Machine cut Granite stone, 20mm thick, any colour, as in flooring, set and jointed with neat cement slurry and pointed with grey cement mixed with pigment to match the shade of the slab over 15mm thick screed bed in cement mortar 1:4 including rubbing and polishing including dismantling of existing unserviceable stone tiles alongwith cement mortar bedding (but not backing) and removing rubbish off the premises complete all as specified and as directed.

Material and labour for Providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade with approved colour, design & pattern as in footparth, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand etc complete all as specified and as directed.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on other than fair faces of brick work or stone masonry surfaces finished even and smooth without using extra cement on external wall surfaces including taking down cement plaster on brick or stone wall or ceiling concrete etc. including racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed. Note: Water proofing compound shall be measured and paid separately.

M&L rendering 10mm thick in CM 1:6 on brick surfaces and finished even and smooth without using extra cement etc, including taking down cement plaster on brick or stone wall or ceiling concrete etc. and racking out joints hacking for key scrubbing down with water etc complete all as specified and as directed.

Supply only integral water proofing compound Note :Make :Impermo/Roff/Cico

Material and Labour for Applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etccomplete all as specified and as directed.

Material and labour for Preparation of newly plastered surfaces on wall and applying two coats of oil bound distemper over a preparatory coat of chalk whitining on plastered surface over a coat of priming plastered and other surfaces with alkali resistant priming paint completed all as specified and as directed.

Material and Labour for complete removal of existing treatment on old walls and applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali and fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces etc, all as specified and directed

Material and labour for Preparation of old steel surfaces of any descriptiuon exc 10cm in width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed..

Material and labour for Preparation of new and previously un-treated wood and wood base surfaces of any description over 10cm width or girth and applying one coats of synthetic enamel paint complete all as specified and as directed.

Supply and fix 110mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix 75 mm bore PVC (SWR) pipe single socketed in any length with rubber ring joints fixed to wall complete all as specified and as directed. Note :Make of PVC(SWR) Pipe :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix Health faucet Stainless steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and stainless steel wall hook including making connections and fixed in position complete all as specified and as directed.

Supply and fix in repairs CON-041KN 2 Way Bib Cock with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and as directed. Make : Jaquar or equivalent product of Parryware Cat No : G4734A1 Two Way Bib Cock / Hindware Cat No : F330004CP Bib Cock 2 in 1 as approved by GE.

Supply and fix Sink with drainage board made of stainless steel 1mm thick kitchen with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including taking down of kitchen sink of any description and type and making good disturbed surface complete all as specified and as directed.Note :Make of Sink :Nirali/Blue Star/Joyna

Supply and fix15 mm bore Bib tap brass chromium plated fancy type with crutch or butter-fly handle, screwed down , screwed for iron pipe or for brass ferrule etc complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix Vitreous China Urinal, Full Stall Type, White complete including providing and fixing plugs ,bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60 mm long brass screws ,pointing around urinal back in cement and provision of urinal spreader of PTMT any colour for fixing with 15 mm dia pipe(Minimum weight:60gms) ,flush pipe ,grating and union for discharge pipe etc complete all as specified and as directed.

Supply and fix Brass bottle trap 7" (Project) for urinal Full stall type, Cat No BEA-23 Prayag, etc complete all as specifed and as directed.

Supply and fix Toilet paper holder with flat recessed type stainless steel complete all as specified and as directed.Make Jaquar /Hindware/Marc

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.Make Jaquar /Hindware/Marc

Supply and fix CP Towel rail 600mm long ,20 mm dia fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 170gms) complete all as specified and as directed.

Supply and fix in repairs Vitreous China wash down colset pan (pedestal pattern),LYS-WHT-38751S250UFSM Bowl for Coupled WC with UF soft close slim seat cover, Hinges, Fixing Accessories and Accessories Set, Size:380x660x765 mm, S Trap-250mm, LYS-WHT-38201 Cistern with cistern fittings for 38751P180UFSM & 38751S250UFSM Set complete all as specified and directed. Make : Jaquar or equivalent product of Parryware Stanza Cat No : C847I (S-285mm) (685x370x735) White / Hindware Italian Collection ELBA / RIMLESS Cat No : 92528 (S-22/S-30)) 62x37x67 cm Pastel.

Supply and fix Vitreous China wash CNS-WHT-905 Table Top Basin, Size: 410 x 410 x 155mm complete all as specified and as directed. Make : Jaquar or equivalent product of Parryware Regal Cat No : C846Q (420 x 420 x 130mm) White / Hindware Italian Collection INOX Size : 38.5 x 38.5 x 13 cm Cat No : 91050 Pastel as approved by GE.

Supply and fix CON-309KNBM Sink Mixer with Swinging Spout (Table Mounted Model) with 450mm Long Braided Hoses complete all as specified and directed. Make : Jaquar or equivalent product of Parryware Cat No : G4715A1 Basin Mixer / Hindware Cat No : F330014SCP Center Hole Basin Mixer Popup Waste as approved by GE.

Material and labour for 1000 litres capacity rotational moulded polyethylene (HDPE) water storage tanks, 'ISI' marked, cylindrical, vertical with closed top conforming to IS 12701-1989 having two layers wall construction with manhole lid and suitable locking arrangement including making holes for inlet, outlet and over flow pipes, hoisted, fixed in position and testing complete including Dismantling water tanks of any description from the existing staging/ Building after disconnecting and dismantling of all existing pipe line connections carefully and taken as credit complete all as specified and as directed . Note : Make of Water tank : SINTEX/INFRA/POLYCON

Material and labour for 20mm outer dia 3-layer PP-R Polypropylene random co polymer) pipes SDR 7.4 & SDR 11 UV stablised and antimicrobial welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded Polypropylene random fittings fixed complete to walls, ceilings or in floors, including cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth, including taking up or down for bore of pipes in 15 mm, steel tubing and connections and taken as credit complete all as specified and as directed.Note :Make of PPR Pipe :

Material and labour for 25 mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16) & UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply with and including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls/ roofs, ceilings or in floors/ trenches etc.with and including provision of all fittings, including taking up or down for bore of pipes in 20 mm, steel tubing and connections and taken as credit complete all as specified and as directed.Note :Make of PPR Pipe :

Material and labour for 25mm outer dia 3-layer PP-R Polypropylene random co polymer) PP-R Gate valve (brass insert) complete all as specified and as directed.Note :Make of PPR Valve :

Supply and fix in repair Stop valve fancy type brass chromium plated with long shank and cup screwed both ends for 15mm bore GI pipe or for union complete all as specified and as directed . Make Jaquar /Hindware/Marc ( Sample as approved by Garrison Engineer).

Supply and fix PVC connections 15 mm size with PTMT nuts 450mm long completeall as specified and as directed. Note :Make : Prayag /M/S Shakthi Industries

Supply and fix PVC (SWR) reducer for 110 mm bore pipe complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix PVC (SWR) cowl 75 mm bore pipe complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

S&F 110 mm PVC (SWR) WC connector with lip ring complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix PVC (SWR) S trap 110mm bore complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Supply and fix PVC (SWR) nahani/floor trap plain with grating of 75mm dia outlet including jointing with solvent cement complete all as specified and as directed. Note :Make :Finolex/Supreme/Prince (ISI MARKED)

Surface excavation not exceeding 30cm deep and averagig 15cm deep and getting out in soft / loose soil complete all as specified and as directed.

Excavation over areas not exceeding 1.5 metre deep and getting out in soft / loose soil, etc complete all as specified and as directed.

Returning filling in including spreading levelling, watering and well ramming in layers n.exc 25cm thick with useful soil complete all as specified and as directed.

Removing excavated soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and as directed.

Material and labour for Moorum/red bajri filling in floors or paving, laid in layers n exc 15cm thick, spread levelled and rammed including watering and consolidation complete all as specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exc 63 mm deposited spread and levelled in layers not exc 15 cm thick and well rammed to a true surfaces complete all as specified and as directed.

Excavating in post holes each n exc 0.5 cum, getting out, in soft /loose soil, ramming earth filling or borken rubble mixed with earth around in layers nexc 25 cm watering and removing surplus soil to distance nexc 50 m and making good surfaces complete all as specified and as directed.

Material and labour for PCC 1:2:4 type B2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and as directed.

Material and labour for PCC 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundation filling and mass concrete etc complete all as specified and as directed.

Material and labour for Providing plain cement concrete 1:4:8 type D-2 (using 40mm graded stone stone aggregate) as in sub-base of floor, 100mm thick including necessary steel form work complete all as specified and as directed.

Material and labour for Pre-cast cement concrete solid block masonry, exc 10cm width, blocks cast in PCC 1:3:6 type C1, using 20mm graded stone aggregate, set in CM 1:6 complete all as specified and as directed.

Material and labour for Premium Quality Non-skid joint free coloured ceramic tiles of 7 to 8mm thick area of each tile exceeding 0.06 Sqm but not exceeding 0.11 sqm set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile fixed over 15mm thick screed bed of cement mortar 1;6 in floors etc complete all as specified and as directed .Note :Make of Ceramic Tile :Johnson/Khajaria/Naveen

Material and labour for Glazed ceramic coloured tiles in vertical surface of size 350x250x7 mm/ 450x 350x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match with the shade of the tile in skirting/dado over and including rendering 10 mm thick in CM 1:4 on brick masonry walls as in backing coat of skirting, dado etc complete all as specified and as directed Note :Make of Glazed Ceramic Tile :Johnson/Khajaria/Naveen.

Material and labour for Rendering 5mm thick in cement mortar 1: 4 mixed with water proofing compound over 10mm thick backing coat in cement mortar 1:6 on fair faces of brick work or PCC block masonry or concrete surfaces finished even and smooth without using extra cement complete all as directed. Note: Water proofing compound shall be measured and paid separately.

Material and labour for Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over one coat of alkali resistent primer on plastered surfaces of walls complete all as specified and as directed

Supply and fix Mild Steel work in tubular tru-sses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 etc complete all as specified and as directed.

Supply and fix 5 mm thick mild steel Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, with riveted, bolted or welded attachment conforming to Fe 290 grade E-165 complete all as specified and as directed.

Supply and fix Pre painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick (TFT) of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, ridge,valley gutter fixed with self tapping screws and washers completec all as specified and as directed.Note:(i)Make of Galvalume sheet:Tata Blue scope Ltd/JSW (Colouron)/Llyod (II) Measurement shall be taken flat as fixed without any allowance for laps, etc.

Material and labour for Rotational moulded Poly-ethylene Water storage tanks (cylindrical vertical with closed top) double layered, hoisted and fixed in position all as specified in SSR Part-I of 500 litres capacity complete all as specified and as directed. Note :Make of water tank :Sintex/Infra/Polycon (ISI MARKED)

Supply and fix in repairs Gun metal gate valve for 20mm bore pipe with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and as directed . Note :Make of gun metal gate valve :Leader/Kartar/Zoloto.(ISI MARKED)

Supply and fix in repairs 20mm bore dia PTMT ball valves high pressure (minimum weight 210 grams) with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe complete all as specified and as directed.Note:Make :Prayag/M/S Shakthi Industries

Material and labour for 25 mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16) & SDR 11UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply with and including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls/ roofs, ceilings or in floors/ trenches etc.with and including provision of all fittings, complete all as specified and as directed.Note :Make of PPR Pipe :

Material and labour for 20 mm outer dia 3-layer PP-R (Polypropylene random copolymer) pipes SDR 7.4 (PN 16) & SDR 11UV stablised and antimicrobial fusion welded having thermal stability for hot & cold water supply with and including all PP-R plain & brass threaded polypropylene random fittings fixed complete to walls/ roofs, ceilings or in floors/ trenches etc.with and including provision of all fittings, complete all as specified and as directed.Note :Make of PPR Pipe :

Supply and fix Vitreous China wash basin, white, flat back, size 630 mm x 450 mm including CI brackets, (flat back or angle back type) any size, including cutting for and pinning in ends of pedestal stand and Provision of PVC waste coupling, 32 mm dia Low density polyethylene pipes (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors, including 15 mm bore long neck fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' and 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe including 15 mm bore fancy type Stop valve, cast copper alloy, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and 600mm PVC connection pipe etc, complete all as specified and as directed. NOTE: MAKE OF WASH BASIN: Make: Jaguar /Hindware/Cera MAKE OF Pillar tap:Make: Jaguar /Hindware/Marc. Make of Stop Valve:Leader/ Hindustan /Gem/Prayag/Seico

Supply and fix Vitreous China white soap dish, approximate size 160x 160x90mm any type fixed to plugs with chromium plated brass screws etc, complete all as specified and as directed. :Make: Jaguar /Hindware/Marc.

Supply and fix Portolet Portable Readymade Toilet Cabin of size 910 mm (W) x 1075 mm (D) x 2060 mm (H) with 4 to 5 mm thick plastic material by Roto-moulded proceess, the PUF shall be filled in cavity between two wall for extra load bearing, single leaf shutter shall be made out with extruded PVC section, size of door is 600 mm x 1800 mm ,with locking arrangment and inside plumbing items such as IWC, CP bib tap,PVC pipe line, Bio Digester tank filled with Bio Inculum chemicals inside attached below with 300 litres capacity with outlet connection and electrical fitting 1 x electric bulb holders and switch inside toilet etc complete all as specifed and as directed. Make: Sintex(ISI MARKED)

Material and labour for Point wiring with 1.5 Sqmm size single core PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded cable for phase and neutral drawn through in and including PVC casing capping of suitable size with all necessary fittings and provision of one run of Green coloured PVC insulated FRLS unsheathed 1100 volts grade copper conductor multi-stranded single core cable of size 1.5 sqmm and connected to common earth dolly including provision of suitable size of modular metal box fixing on wall with and white colour cover plates for mounting modular type switches, sockets, fan regulators, bell pushes etc. for one light point controlled by one switch 1 way including taking down old unserviceable point wiring of any description and taken as credit complete all as specified and as directed.NOTE. (i) Make of PVC cable :Finolex/Polycab/KEI (ii) Make of PVC casing and capping : Avon Plast/Presto plast /Garware

Description all as per item No. 88 here in before but for one fan/exhaust point controlled by one switch and regulator.

Description all as per item No. 88 here in before but for one 3 pin socket outlet for independent socket 5 amps point

Description all as per item No. 88 here in before but for one 05 amps socket outlet, on the same board socket .with other switches with cable of size 1.5 sqmm

Description all as per item No 88 here in before but complete with 1100volt grade FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core and one run of FRLS PVC insulated unsheathed multistranded wire with 2.5 sqmm copper cable ,single core of upto earth dolly for 15 Amps socket outlet independent .

Supply and fix Modular switch type 6 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix Modular switch type 16 Amps flush button 230 volts AC one way, complete all as specified and as directed. Make -Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular socket outlet 6 Amps 2/3 pin combined flush type multipurpose 2 module, complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular socket outlet 6/16 Amps 2/3 pin combined flush type multipurpose 2 module complete all as specified and as directed. Make : Anchor (Roma) /Legrand/Indo Asian

Supply and fix in repairs Modular electronic type fan regulator 230 V , 120 watt step type, 2 module complete all as specified and as directed . Make : Anchor/Legrand/Rider

Supply and fix in repairs PVC /Poly carbonate Ceiling rose surface bakelite of size 63.5 x 20 mm, three terminals complete all as specified and as directed . Make : Anchor/ Cona / Havells

Material and labour for Sub main wiring with 2 runs of single coreFRLS PVC insulated unsheathed multi-stranded copper conductor cables of size 6.00 Sq mm drawn through in and including PVC casing/capping with all necessary fittings fixed in wall/ceiling and Provn of one run of 6.00 sqmm FRLS PVC insulated unsheathed multistranded copper conductor double core cable for earth continuity and connected to common earth dolly complete all as specified and as directed. NOTE:(i) Two runs of 6.00sqmm and one run of 6.00 sqmm and one run of PVC casing/capping will be measured as one unit. (ii) Make of PVC cable :Finolex/Polycab/KEI (iii) Make of PVC casing/capping: Avon Plast/Presto plast /Garware

Supply and fix in repair LED luminaire of size 600 mm x 600 mm, 35/36 watt, 220 V AC recessed type with high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up to driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Havells cat part no OR equivalent in CG/Philips

Supply and fix in repair Round shaped 12 watt 220 volts AC recessed type with high efficiency PMMA diffuser soft glare free light complete with drivers, holders, LED lamp suitable for roof ceiling includingconnecting up driver with FRLS PVC three core flexible copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Havells cat part no OR equivalent in CG/Philips

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 18/20 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core flexible FRLS PVC copper conductor cable of suitable size complete all as specified and as directed. Note : Make : Havells cat part no LHEXACP7FN1W020 - PRIDE PLUS 20W INVERTER BATTEN OR equivalent in CG/Philips

Supply and fix in repairs LED INTEGRATED BATTEN T5 tube light fitting type 1x 9 /10 watt indoor decorative aluminium extruded T5 LED Battens-integrated type complete with all accesories internally pre-wired and including connecting up with twin core flexible FRLS PVC copper conductor cable of suitable size complete all as specified and as directedNote : Make : Bajaj OR equivalent in CG/Philips

Supply and fix Ceiling fan complete with blades, down rods of suitable length of 20 mm dia medium grade GI pipe from top to bottom, and accessories, 230 V, 1200 mm sweep, Minimum air delivery 210 CFM with service value 6.00 BEE 5 star rated with brush direct current motor (BLDC) complete all as specifed and as directed . Note : Make:-Bajaj /Crompton/Orient

Supply and fix Wall mounting fan 230 V single phase 300 mm sweep with all accessories fixed to wall with all necessary brackets ,bolts nuts etc including testing and making good disturbed surfaces complete including taking down existing unserviceable wall mounting fan from the location and setting aside for fixing /deposting to MES store yardall as specified and as directed . Note : Make:-Almonard /Crompton/Orient

Supply and fix Exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz, RPM 1200, Copper winding of sweep 250 mm with necessary grouting and fixing arrangements and provision of 3 core FRLS PVC flexible copper conductor cable of size 1.5 sqmm size from ceiling rose to connector of exhaust fan complete all as specified and directed .. Note : Make:-Almonard /Crompton/Orient

Supply and fix in repairs LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed. Note : Make : Havellscat part no LHETACU7IA7J035 - Endura Sundown 35W OR equivalent in CG/Philips

Supply and fix Factory made epoxy powder coated distribution board SPN 12 ways double door with acrylic top cover (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plate with knockouts and suitable for one SPN MCB 32/40 Amps as incomer and 10 SP MCBs as outgoings complete all as specified & directed Make -:Indo Asian/L&T/Siemen

Supply and fix amp rating 240V, 10KA 'C' curve miniature circuit breaker (MCB) of SPN 40 to 63 AMP following poles and current carrying capacity in the MCB DB complete all as specified and directed .Note :Make :Indo Asian/L&T/Siemen

Supply and fix MCB SP 240 Volt of capacity 6 to 40 Amps 10 KA‘C’ curve complete all as specified and as directed. .Note :Make :Indo Asian/L&T/Siemen

Material and labour for Earthing complete with galvanised earth plate electrode 600 mm x 600 mm x 6 mm thick, burried directly in ground in vertical position, earth pit not less than 2.25 Metre deep below ground level with top edge of the plate not less than 1.5 Metre below ground level connetced with galvanised iron earth lead wire of size 4 mm dia(Upto 7.50 metre length) by means of nuts, bolts, check nuts and washers made of galvanised iron or steel earthing lead protected by galvanised iron pipe 15 mm bore (medium grade) and other end connected to earthing test point or lightening arrestor or main controlling switch as directed including providing funnel with 20mm bore galvanised iron pipe (light grade), wire mesh, charcoal or coke and common salt in alternate layer of 15cm (compacted thickness) all round the earth electrode, concrete earth pit in PCC (1:3:6) type C-1 (with 20mm graded aggregate), 50mm thick precast RCC (1:2:4) cover slab (re-inforced with 8mm dia TMT bar @ 15 cm C/C bothways and suitable handle made of 10mm dia) including necessary excavation & earth work, returning filling and removal of surplus earth upto a distance not exceeding 50 Mtr etc all as shown on electrical plate No. 3 of MES Schedule Part-I complete to obtain less than 1 Ohm earth resistance, fiaxed in repairs complete all as specified and as directed.

Supply, lay and test cable XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of Cross sectional area 35 Sqmm, 3.5 core laid in trenches or fixed to wall / passing through pipe / pole compete all as specified and as directed. Note : (i) Excavation & earth work, Brick protection and sand cushining shall be measured and paid for separately under relevent items in this BOQ (ii) Make of XLPE Cable : Gloster/Polycab/CCI

Excavation in trenches n. exc. 1.5m wide and n. exc. 1.5m depth in any type of soil up to top of drain pipe,laying of cable etc complete all as specified and as directed.

Material and labour for Double wall corrugated HDPE pipes of ISI marked 63 mm outer dia and 50 mm inner dia as in cable protection fixed to poles with necessary suitable MS clamps, bolts, nuts, washers or laid in trenches/ roads crossings etc complete. all as specified and directed.Note :Make : Rex/ Ketron/Duraline

Supply and fix Galvanised iron water tube 'light grade' of size 40 mm bore with and including all GI fittings such as flanges, unions, reducer sockets, socket reducing bends, elbows, tee, check nuts, caps, plugs etc.and clips, wall hooks etc. laid in trenches, on ground or fixing on wall and testing complete all as specified and directed.Note:Make of GI Pipe :TATA/JINDAL/ZENITH (ISI MARKED)

Supply and fix Factory made epoxy powder coated distribution board double door TPN 4 ways (VTPN MCCB DB) with metal door (IP-43 protection) fabricated from minimum 1.0 mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amps copper bus bar, neutral bar, strandard DIN rail, earth bar and cable ties for cable management, top and bottom removable gland plates with Knockouts and suitable for one FP MCCB 100 Amps as incomer and SP/TP MCBs (or any combination of SP/TP MCBs ) outgoings complete all as specified and as directed.Note :Make :L&T/Indo Asian/Legrand

Supply and fix in replacement MCCB,4 pole ,100 Amps , 16 KA , C Series current rating conforming to IEC-609472 & IS-139473 to be fixed in distribution board complete all as specified and as directed..Note :Make :Indo Asian/L&T/Siemen

M/s. J P CONSTRUCTIONS

SHRI.H.R.PATIL

ASHIRWAD ELECTRICALS

N K CONSTRUCTION

ASHOK M RAJGOLKAR

M/S MAHADEV M PATIL

M/s. VIJAY ELECTRICALS

M/s. N D KALING

DHANSHRI ENTERPRISES