REPAIR MAINT OF STEEL AND WOODEN FURNITURE ITEMS OF MD ACCN OTHER THAN MAP UNDER GE I GOS

Amount

Locker bed side steel (Drg No FD-257) Removing old worn out damaged base legs, S&F 1mm thick MS new legs as per existing shape and size as per drg or directed by Engr-in-Charge.

All as per item No 01 above but shelves

All as per item No 01 above but shutter

All as per item No 01 above but base/ top sheet

Removing of old damaged door lock, S&F new door lock as per sample or as directed by Engineer-in-Charge.

Removing of old damaged CP handle, S&F New CP handle as per sample as directed by Engineer-in-Charge.

M&L for welding to damaged/ decayed steel frame with arc welding as per std workmanship or as directed by Engr-in-Charge.

M&L for two coat spray painting with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge.

Table office Clk / Officer steel (Drg No FD-84 1004, 1003) Removing old damaged front/rear rail, S&F new front/rear rail of 25mm MS square pipe 1.6 mm thick as per existing shape and size and as per drg or as directed by Engr-in-Charge.

All as per item No 09 above but side rail.

All as per item No 09 above but legs.

All as per item No 09 above but stiffener.

Removing old damaged Drawers , S&F new steel drawers as per existing shape and size, as per drg or as directed by Engr-in-Charge.

Removing old damaged top of Table, S&F new 18 mm pre-laminated praticale board Top of table as per existing shape and size all as per drg or as directed by Engr-in-Charge.

M&L for welding to damaged/ decayed steel frame of table with arch welding as per std workmanship or as directed by Engr-in-Charge.

Removing old damaged lock, S&F new lock as per existing shape and size complete all as specified and directed by Engr-in-Charge.

Removing UNSV plastic shoes from Leg and S&F new hard plastic shoes of best quality of each leg as per drg or as directed by Engr-in-Charge.

M&L for spray painting of table with synthetic enamel paint OG as per drg or as directed by Engr-in-Charge.

Table 900x600x760mm with drawer steel (Drg No FD-1008) Removing old damaged top, S&F 18mm thick pre-laminated praticale board top as per existing shape and size all as per drg or as directed by Engr-in-Charge.

All as per item No 19 above but long rail

All as per item No 19 above but short rail

All as per item No 19 above but Legs

All as per item No 19 above but Center stiffener

Removing old damaged drawers, S&F new drawers as per drg or as directed by Engr-in-Charge.

Removing of old damaged drawer lock, S&F drawer lock as per sample or as directed by Engineer-in-Charge.

M&L for welding to damaged/ decayed steel frame of table with arch welding as per std workmanship or all as directed by Engr-in-Charge.

Removing UNSV plastic shoes from Leg, S&F new hard PVC shoes of best quality of each leg as per drg or as directed by Engr-in-Charge.

M&L for spray painting of table with synthetic enamel OG paint as per drg complete all as specified as directed by Engr-in-Charge.

Chair CBA special with hand rest (Drg No FD- 120 (M) M&L for welding to damage/decayed steel frame of chair CBA with Arms complete and all as directed by Engr-In-Charge.

S&F flat iron 20x3mm thick welded to steel frame to support of wooden seat to each chair as directed by Engineer-In-Charge.

Removing the old and damage arm rest and S&F arm rest as per drg or as directed by Engineer-In-Charge.

Removing the old damage seat frame, S&F seat frame as per drg or as directed by Engr-In-Charge.

Removing the old damage back rest frame, S&F back rest frame as per drg or as directed by Engr-In-Charge.

Removing the old damage hand rest padded, S&F hand rest padded as per drg or as directed by Engr-In-Charge.

Removing UNSV plastic cane of Seat and back rest frame M&L for recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg or as directed by Engr-in-Charge.

Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg or as directed by Engr-In-Charge.

M&L for painting to steel frame with two coat of OG synthetic enamel paint as per drg or as directed by Engineer-In-Charge.

Chair CB Steel with Arms (Drg No FD-75) M&L for welding to damage/decayed steel frame of chair steel CB with Arms complete and all as directed by Engr-In-Charge.

S&F flat iron 20x3mm thick welded to steel frame to support of wooden seat to each chair as directed by Engineer-In-Charge.

Removing the old and damage arm rest and S&F arm rest as per drg or as directed by Engineer-In-Charge.

Removing the old damage seat frame, S&F seat frame as per drg or as directed by Engr-In-Charge.

All as per item No 38 above but back rest frame.

Removing UNSV plastic cane of Seat and back rest frame M&L for recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg or as directed by Engr-in-Charge.

Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg or as directed by Engr-In-Charge.

M&L for painting to steel frame with two coat of OG synthetic enamel paint as per drg or as directed by Engineer-In-Charge.

Chair Varandha (PVC) (FD-19, 359, FD/MAP-II/06) Removing UNSV seat & back plastic sheet, S&F new seat & back plastic sheet as per drg or as directed by Engr -in- Charge.

M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge.

S&F 20mm steel conduit pipe nos 1 welded to steel frame to support chair as directed by Engr-In-Charge.

Removing unsv plastic shoes from chair, S&F new hard PVC shoes of best quality as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Chair CB Steel without Arms (Drg No FD-75) M&L for welding to damage/decayed steel frame of chair steel CB with Arms complete and all as directed by Engr-In-Charge.

S&F flat iron 20x3mm thick welded to steel frame to support of wooden seat to each chair as directed by Engineer-In-Charge.

Removing the old damage seat frame, S&F seat frame as per drg or as directed by Engr-In-Charge.

All as per item No 51 above but back rest frame.

Removing UNSV plastic cane of Seat and back rest frame M&L for recanning to seat and back rest frame with 2mm wide half round plastic cane in Godrej pattern including polishing to wooden frame, as per drg or as directed by Engr-in-Charge.

Removing the old UNSV top cap and PVC toes, S&F new PVC top cap and PVC toe to each chair as per drg or as directed by Engr-In-Charge.

M&L for painting to steel frame with two coat of OG synthetic enamel paint as per drg or as directed by Engineer-In-Charge.

Chair Verandah (Can) (Drg No FD-19, 359) Removing UNSV plastic cane, M&L for recanning to chair with 4mm wide half round plastic cane in Godrej pattern, as per drg or as directed by Engr-in-Charge.

M&L for welding to damage/decayed steel frame all as directed by Engr-In-Charge.

Removing UNSV plastic shoes from chair, S&F new hard PVC shoes of best quality as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Sofa Set 5 seaters with cushion (Drg No FD-281, FD/MAP/06) Removing of old damage seat and back cushion from Sofa Set 5 Seater , S & F New cushion of 100 mm thick 40 density make sleep well/Kurlon duly upholster with tepstry cloth not less than Rs. 250/- Per meter of best quality approved shade as per drg or as directed by Engineer-in-Charges.

Charpoy GI pipe with ply top (Drg No FD-220) Removing of damage UNSV Top plywood , S&F new 12mm thick BWR plywood as per specification or as directed by Engr-in charge

Removing damaged /UNSV long rail, S&F new 32 mm dia BWR dia GI long rail med grade ISI marked threading shall be made up to 22 mm at one end and 40mmon other end complete all as specified & directed by Engr-in charge

Removing of old damaged GI UNSV long rail & fabricated in short rail to charpoy GI pipe threading shall be made upto 22 mm at one end and 40 mm on other end complete all as specified as directed by Engr-in-Charge.

Removing old damaged GI UNSV short rail and fabricated in legs to charpoy GI pipe threading shall be made upto 40 mm complete all as specified as directed by Engr-in-Charge

Removing of old damaged GI three way elbow 32mm dia S&F New GI three way Elbow 32mm dia ISI marked all as specified and directed by Engr-in-Charge.

Removing of old damaged GI 32 mm dia check nut, S&F GI 32 mm dia check nut 10mm thick complete all as specified and directed by Engr-in-Charge.

Removing of old damaged FI clamp from GI charpoy S&F new FI clamps of size 25x3mm welded to GI leg pipe complete all as specified and directed Engr-in-Charge.

Table 900 x 600 x 760 mm with drawer (Drg No FD-224, 283) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing old damaged legs , S & F new legs as per existing shape and size, as per drg or directed by Engr-in-Charge.

All as per item No 70 above but long Rail.

All as per item No 70 above but short Rail.

All as per item No 70 above but side stiffner.

All as per item No 70 above but centre stiffner.

Removing old damaged Drawer , S & F new Drawer made of 12/6 mm thick BWR commercial plywood as per existing shape and size and replaced unsv knobs, as per drg or directed by Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Dining (Drg No FD-228, 203, 279, FD/MAP-II/05) Removing of damaged front leg ,S&F new Front leg, as per existing shape and size directed by Engr-in-Charge.

All as per item No 78 but rear leg.

All as per item No 78 but side rail (left/right).

All as per item No 78 but front rail.

All as per item No 78 but rear rail.

All as per item No 78 but back rest.

All as per item No 78 but stiffner.

Removing UNSV plastic cane, M&L for Recanning to Chair with 2mm wide half round plastic cane in Godrej pattern & PVC sheet, provided hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

Removing UNSV PVC sheet and suporting of 2x stiffener of bottom of PVC sheet M&L for Chair PVC sheet, provided hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Easy (Drg No FD-201, 229, 281) Removing of damaged front leg ,S&F new 25 x 55 mm thick Front leg made of 1st calss season teak, as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 88 above but rear leg.

All as per item No 88 above but side seat rail.

All as per item No 88 above but back side rail.

All as per item No 88 above but front seat rail.

All as per item No 88 above but rear seat rail.

All as per item No 88 above but back upper/lower rail.

All as per item No 88 above but stiffner.

All as per item No 88 above but arm.

Removing UNSV plastic cane,M&L for Recaning to Chair with 2mm wide half round plastic cane in Godrej pattern, provided hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Wooden Bottom. (Drg No FD-56,225,285) Removing of old damaged front leg ,S&F new 30 x 55 mm thick Front leg made of 1st class season teak, as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 99 above but rear leg.

All as per item No 99 above but side rail.

All as per item No 99 above but front rail.

All as per item No 99 above but rear rail.

All as per item No 99 above but stiffner.

All as per item No 99 above but back reast.

Removing UNSV/damaged seat of ply wood, S&F seat of 6 mm thick ply wood commercial BWR quality and provided hard PVC toe to each leg as per drg or as directed by Engineer-In-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Chair Writing (Drg No FD-202,250, 271,280) Removing of old damaged front leg ,S&F new 30 x 55 mm thick Front leg made of 1st class season teak, as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 108 above but rear leg .

All as per item No 108 above but back rest.

All as per item No 108 above but side rail .

All as per item No 108 above but front/back rail.

All as per item No 108 above but stiffner.

All as per item No 108 above but Hand rest.

Removing UNSV plastic cane,M&L for Recaning with 2mm wide half round plastic cane in Godrej pattern, provide hard PVC toe to each leg as per drg or as directed by Engr-in-Charge.

M&L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table dining 4 person (Drg No FD-239,269,273, FD/MAP-II/03) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F new 40 x 75 mm thick leg made of 1st class season teak, all as per drg or as per existing shape and size directed by Engr-in-Charge.

All as per item No 117 above but long rail.

All as per item No 117 above but stiffner

All as per item No 117 above but short rail

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Peg (Drg No FD-266,277) Removing old damaged top,S & F new 18 mm thick pre-laminated praticale board Top, as per existing shape and size,provided hard pvc toe to each leg ,all as per drg or as directed by Engr-in-Charge.

Removing of old damage leg, S&F New 30 x 50 mm thick leg made of 1st class season teak, all as per drg or as directed by Engineer-In-Charge.

All as per item No 123 above but long rail.

All as per item No 123 above but short rail .

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table bed side (Drg No FD/E6/MAP/15 (R)) Removing of old damage Top of Table bed side S & F new 18 mm thick pre-laminated praticale board Top, as per drg or as per existing shape and size directed by Engr-in-Charge.

Removing of old damage left/right side, S & F new 12 mm partical board with teak venreed OSD left/right side as per drg or as directed by Engineer-In-Charge.

Removing of old back side, S&F new 6 mm ply BWR quality to back side as per drg or as directed byf Engineer-In-Charge.

Removing of old damage shelves and bottoms, S&F New 19 thick MDF board shelves as per drg or as directed by Engineer-In-Charge.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Teapoy Varandha Steel (Drg FD-255, 383) Removing old damaged top, S&F new top of 18 mm thick pre-laminated praticale board as per existing shape and size all as per drg are as directed by Engr-in-Charge.

M&L for welding to damage/decayed steel frame all as directed by Engr-In-Charge.

Removing UNSV plastic shoes from leg, S&F new hard PVC shoes each leg best quality as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of white synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Table Computer (TP, FD/E6/MAP/03) Removing old damaged top, S&F new Top as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing old damaged tray S&F new tray as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing old damaged shelf S&F new shelf as per existing shape and size, all as per drg or as directed by Engr-in-Charge

Removing UNSV plastic shoes from Leg and S&F new hard plastic shoes of best quality of each leg as per drg or as directed by Engr-in-Charge.

Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Dressing Gents with Mirror (Drg No FD-230,379 FD/E6/MAP/16) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage drawers, S&F new drawers of 12/6 mm thick commercial BWR quality ply with knobs as per drg or as directed by Engineer-In-Charge.

Removing of old damage Top S&F Nes Top of 12 mm thick pre-laminated particale board,as per drg or as directed by Engineer-In-Charge.

Removing of old damage left/right side S&F new left/right side of 12 thick pre-laminated particale board, as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side Ply,S&F new back side Ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage bottom ply, S&F new bottom of 6 mm thick commercial BWR quality ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side 6mm ply of mirror, S&F new back side 6mm ply for mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage long rail of mirror frame including beading , S&F new 25 x 35 mm thick long rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge.

Removing of old damage short rail of mirror frame including beading , S&F new 25 x 35 mm thick short rail of mirror frame including fitting as per drg or as directed by Engineer-In-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Table Dressing Ladies with Mirror (Drg No FD/E6/MAP/11) Removing of old damage mirror S&F new mirror of 5 to 5.5mm thick mirror as per drg or as directed by Engineer-In-Charge.

Removing of old damage drawers, S&F new drawer of 12/6 mm thick commercial BWR qualithy playwood with knobs as per drg or as directed by Engineer-In-Charge.

Removing of old damage Top S&F new Top of 19 mm thick pre-laminated praticale board as per drg or as directed by Engineer-In-Charge.

Removing of old damage left/right side and centre protion S&F new left/right side & centre protion of 19 mm thick pre-laminated particale board as per drg or as directed by Engineer-In-Charge.

Removing of old damage back side ply,S&F new back side Ply of 6 mm thick commmercial BWR quality, as per drg or as directed by Engineer-In-Charge.

Removing of old damage leg , S&F new leg as per drg or as directed by Engineer-In-Charge.

Removing of old damage bottom ply , S&F new 12 mm thick bottom commercial BWR quality ply as per drg or as directed by Engineer-In-Charge.

Removing of old damage glass shutter with aluminum channel, S&F new glass shutter with aluminum channel as per drg or as directed by Engineer-In-Charge.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

Removing old damage channel S&F New Telescopic channel stainless steel, all as specified shape, size, drg or as per directed by Engr-in-Charge.

Removing of damage old UNSV wheel S&F new wheel to stool revolving complete all as per specification or as directed Engr-in-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Bed Ply Wood Top (Drg No FD-213, 246) Removing of old damage long rail, S&F New long rail of IInd cl HW Sal wood as per drg or as directed by Engineer-In-Charge.

All as per item No 166 above but stiffner

All as per item No 166 above but short rail

Removing of old damage leg, S&F new leg of 60 x 60 at top & 30 x30 at bottom as per drg or as directed by Engineer-In-Charge.

Removing of old damage head rest, S&F head rest as per drg or as directed by Engr-in-Charge.

All as per item No 166 above but foot rest.

Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Charpoy IP Hard Top Steel/ PBOR (Drg No FD/E6/MAP-II/01) Removing of old damage 12mm BWR ply wood, S&F 12mm BWR ply wood ISI marked as per drg or as directed by Engineer-In-Charge. .

M&L for welding to damage/decayed steel frame all as per drg or as directed by Engr-in-Charge.

M&L for painting steel surface with two coat of Black synthetic enamel paint as per drg or as directed by Engr-in-Charge.

Board Notice (Drg No FD-1042, 99 (M), 117 (M), 1041 ) Removiing old damage unsv green baize cloth, S&F New green baize cloth of best quality with allround beadings of 1st class HW as per drg or as directed by Engr-in-Charge.

Removing old damage unsv frame S&F new frame of particle board/MDF board 18 mm thick of as per existing shape and size, as per drg or directed by Engr-in-Charge.

All as per item No 177 above but sliding glass 4mm thick.

Removing old damage Soft board S& F New soft board as per exsisitng shape and size all as specified and directed by Engr-in-charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

Bin Linen multipurpose (Drg No FD-E6/MAP/09) Removing of old damaged top S&F New Top of pre-laminated partical board of 18 mm thick as per existing shape & size, all as per drg and directed by Engineer-in-Charger.

Removing old damage left/right side pre laminated partical board, S&F New left/right side pre laminated practical board of 18 mm thick all as per drg and directed by by Engr-in-Charge.

Removing of old damaged drawer S&F new drawer of 18 mm thick pre-laminated praticle board existing shape and size all as per drg or as directed by Engineer-in-Charger.

Removing old damage shutter S&F New shutter of 18 mm thick pre-laminated praticle board as per existing shape and size, drg or as directed by Engr-in-Charge.

Removing old damange legs S&F New legs as per existing shape and size as per drg or as directed by Engr-n-Charge.

Removing old damage handle S&F New handle 100 mm long CP, all as specified shape, size, drg or as per directed by Engr-in-Charge.

M/L for applying polyurethane (P.U.) wood polish all exposed wood surface as per drg or as directed by Engineer-in-Charge.

M/s Bapujee Builders and Traders (BID ID -3350306)

ABC CONSTRUCTION COMPANY (BID ID -3350363)