Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹3.3 CrAdmitted-Finance 1 GANESH DARSHAN ADV SURVE MARG SANDHURST ROAD W MUMBAI 9 | MUMBAI | MAHARASHTRA | L1 | Admitted-Finance | |
| 2 | L2₹3.5 Cr+₹22.3 L (6.79%)Admitted-Finance B 204 KAVITA KUNJ CHS MITHBUNDER ROAD KOPRI THANE E 400603 | THANE | THANE | MAHARASHTRA | 400603 | L2 | Admitted-Finance | |
| 3 | L3₹4.1 Cr+₹82.3 L (25.0%)Admitted-Finance 1507 DWARKAMAI SAI NAGAR ST ANTHONY ROAD CHEMBUR MUMBAI 400071 | MUMBAI | MUMBAI | MAHARASHTRA | 400071 | L3 | Admitted-Finance |
| Sl No | Description | Qty | Unit | Gil Airconditioning And Refrigeration Services L2 | Speedfrost Services Pvt. Ltd. L1 | CHAITANYA SERVICES L3 |
|---|---|---|---|---|---|---|
| 1.00 | Fresh Body Cold Room
Supply & erection of 80 mm thick PUFF insulated internal Panels in the mortuary cold- room of non-corrosive 304 grade Stainless. The SS panels will be sandwiched PUFF insulated of 80 MM thick having density 40kg/M3 including Camlocks. Both side covered by 0.5 MM thick SS sheet of 304 grade. It will be having heat resistance capacity as well as enabling washing & cleaning the cold-room internally. | 393.75 | Sq.Mtr | 18,200 ₹71,66,250 | 17,315 ₹68,17,781.25 Lowest | 21,644 ₹85,22,325 |
| 2.00 | D-composed Body Cold Room
Supply & erection of 80 mm thick PUFF insulated internal Panels in the mortuary cold- room of non-corrosive 304 grade Stainless. The SS panels will be sandwiched PUFF insulated of 80 MM thick having density 40kg/M3 including Camlocks. Both side covered by 0.5 MM thick SS sheet of 304 grade. It will be having heat resistance capacity as well as enabling washing & cleaning the cold-room internally. | 142 | Sq.Mtr | 18,200 ₹25,84,400 | 17,315 ₹24,58,730 Lowest | 21,644 ₹30,73,448 |
| 3.00 | Stainless steel Morgue Door: Supply & erection of 1.060Mtr. W X 2.000 Mtr. height SS Sliding Door with 100% Air tight arrangement having 100 MM thickness , made from (SS 304 sheet) sandwich PUFF insulated. Each door will be having Heavy duty Stainless steel Hinges, handles, Door Gaskets etc. | 3 | Job | 3,00,000 ₹9,00,000 | 2,87,503 ₹8,62,509 Lowest | 3,59,379 ₹10,78,137 |
| 4.00 | Air-cooled condensing units: (Fresh Body Area) Refrigeration Units of aggregate capacity 20 TR (72000 BTU/Hr.) each consists of Scroll compressor (Emerson or Similar make), Air-cooled Blue finned copper Cond. Coil of Kuler / Guntner make of 1 fin/ 4 mm, of Max. operating pressure 32 bar, along with drive package like single phase motor with Fan blade, Suction Accumulator, Service Valves & PLC Control’s etc. with 100 % standby arrangement working on R404A Ref.The approx. power consumption will be 2.3 Kw/Hr. The weight of the Cond. . Unit will be 300 Kg. / Unit. Set Of ( 2 X 11 TR Aircoold oudoor unit per System) | 4 | Unit | 6,02,000 ₹24,08,000 | 5,78,047 ₹23,12,188 Lowest | 7,22,559 ₹28,90,236 |
| 5.00 | Air-cooled condensing units: (De-composed Body Area) Refrigeration Units of aggregate capacity 8 TR (3800 BTU/Hr.) each consists of Scroll compressor (Emerson or Similar make), Air-cooled Blue finned copper Cond. Coil of Kuler / Guntner make of 1 fin/ 4 mm, of Max. operating pressure 32 bar, along with drive package like single phase motor with Fan blade, Suction Accumulator, Service Valves & PLC Control’s etc. with 100 % standby arrangement working on R404A Ref.The approx. power consumption will be 2.3 Kw/Hr. The weight of the Cond. Unit will be 240Kg. / Unit. | 2 | Unit | 5,67,220 ₹11,34,440 | 4,78,441 ₹9,56,882 Lowest | 5,98,051 ₹11,96,102 |
| 6.00 | Supply, erection, testing & Commissioning of floor mounted Evaporative Units for Fresh Body Morgue Room. The outer skin will be of 0.63 mm Pre coated GSS, Inner skin will be of 0.63 mm Plain SS with 80 MM thick sandwiched PUFF insulated panel AHU consisting of 8000 CFM, 75 MM static Axial Fans & Electronic defrostic system. The Evaporator section will be consisting of 6 Row Dx cooling coil complete with Expansion valve, drier core, distributer, Sporlan Dx Expansion valves with Power elemnt suitable to work with R 404 refrigerent. The Axial fan motor will be of TEFC 7.5 HP/230 Volts50 HZ. The Evaporator is designed to achieve 0 Deg. Cent.( +/- 2 Deg. C.)Temperature In Room. The AHU consists of Supply Air connection & Mixing Box for & Return Air. | 2 | Nos | 12,78,040 ₹25,56,080 | 12,66,030 ₹25,32,060 Lowest | 15,82,538 ₹31,65,076 |
| 7.00 | Supply, erection, testing & Commissioning of floor mounted Evaporative Units for Fresh Body Morgue Room. The outer skin will be of 0.63 mm Pre coated GSS, Inner skin will be of 0.63 mm Plain SS with 80 MM thick sandwiched PUFF insulated panel AHU consisting of 3200 CFM, 75 mm static Axial Fans & Electronic defrostic system. The Evaporator section will be consisting of 6 Row Dx cooling coil complete with Expansion valve, drier core, distributer, Sporlan Dx Expansion valves with Power elemnt suitable to work with R 404A refrigerent. The Axial fan motor will be of TEFC 2 HP/230 Volts50 HZ. The Evaporator is designed to achieve 0 Deg. Cent.( 0 Deg. C.)Temperature In Room. The AHU consists of Supply Air connection & Mixing Box for & Return Air. | 2 | Nos | 9,50,080 ₹19,00,160 | 9,49,017 ₹18,98,034 Lowest | 11,86,271 ₹23,72,542 |
| 8.00 | Stainless Steel make (304 grades) Tray 3 tier Rack for storing of 3 Body in each rack. The Overall dimensions of the Rack will be 2000 X 700 X 1676 MM H. The Rack will be fabricated with SS Angle size 40 x 40 x1.6 MM equipped with 100 MM dia. Heavy duty industrial wheel with stopper arrangement to move the rack in the Mortuary for cleaning purpose. The Tray will be removable type to enable easy shifting of body from the tray. The SS Heavy duty C channel will be provided into rack as travel rail for the SS tray for smooth movement of Trays in the racks. | 19 | Nos | 3,00,000 ₹57,00,000 | 2,81,645 ₹53,51,255 Lowest | 3,52,056 ₹66,89,064 |
| 9.00 | Stainless Steel make (304 grades) Tray 3 tier Rack for storing of 3 Body in each rack. The Overall dimensions of the Rack will be 2000 X 800 X 1676 MM H. The Rack will be equipped 100 MM dia. Heavy duty industrial wheel with stopper arrangement to move the rack in the Mortuary for cleaning purpose. The Tray will be removable type to enable easy shifting of body from the tray. The SS Heavy duty C channel will be provided into rack as travel rail for the SS tray for smooth movement of Trays in the racksfor easy & smooth movement of Trays in the racks. | 4 | No | 3,32,885 ₹13,31,540 | 3,01,735 ₹12,06,940 Lowest | 3,77,169 ₹15,08,676 |
| 10.00 | Providing & installing Hydraulic Trolley for movement of Dead Body in morgue as per following Tech. Specifications.
Hydraulic Lift Trolley Size : It shall be made of SS-304 grade sections & sheets having overall size 2032 mm× 610 mm × 2103 mm.(+/-10 mm variations)
Load carrying Capacity: 250 Kgs. Finish: Matt Polish SS.
Construction : SS 304 Complete structure (except Hydraulic Pump & Castors)
SS Sections used: box pipes (50mm x 25mm), round pipes (25mm dia), flats as required. 2.Platform for Stretcher: Open-type to suit the above stretchers.
Lifting System: Stretcher is lifted by a single acting hydraulic cylinder manually by a Foot pump. 3.The Foot-pump : It should be made of Mild Steel and is duly Nickel chrome Plated for long life. 4. Lowering System: By Foot-operated Release pedal. The Stretcher will rest at Lowest level 5. Fully Lowered Platform Height: 450 mm. (Approx). 6.Fully Lifted Platform Height: 1600 mm. (Approx). Wheels: The Trolley is easily maneuvered by Steering on 2 nos. Swivel Castors with 125mm Ø x 50mm width ball bearing Polymer-PU bonded Wheels fitted at the rear end. At the front end, there are 2 nos. Fixed Castors of same size & type. Operating system: The Trolley having 1 no. empty stretcher placed on the platform can be taken to the site as required with ease. The Trolley then needs to be locked in position by using the floor lock provided near the handle. The cadaver shall be kept on the trolley stretcher manually. The trolley can now be taken to the Mortuary cold room for storing. On reaching the place, the stretcher has to be raised /lowered to required height by Manual- Hydraulic Foot-pump. Once the stretcher is in the line with the channels of the rack, the stretcher can be pushed in place from the trolley platform to rack with easy movement. The Platform can now be lowered by operating the Pressure Releasing Switch, thus trolley is ready for other . | 1 | Each | 8,15,197 ₹8,15,197 | 7,96,278 ₹7,96,278 Lowest | 9,95,348 ₹9,95,348 |
Tender Value
Refer Docs
Closing Date
22 Sept 2026, 5:30 pmClosed
Executive Engineer Central Mumbai Electrical Divis
Executive Engineer Central Mumbai Electrical Division Sadhana House 2nd floor, Pandurang Budhkar marg, Behind Mahindra Tower, Worli, Mumbai -18.Telephone 022 4564 6881
Providing replacement of Existing Mortuary refrigeration room with SS racks for Old Mortuary Building at Sir J.J Group of Hospitals Compound , Byculla,Mumbai.
2026_PWDM_1338707_1
Quatation/06/02/26-27/1st
Open Tender
Electrical Works
Item Rate
180 days
JJ Hospital subdivision
Please refer Tender documents.
2 documents required · 2 mandatory
₹0
Exempted
24 Sept 2026
15 Sept 2026
24 Sept 2026
15 Sept 2026
22 Sept 2026
15 Sept 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Fresh Body Cold Room
Supply & erection of 80 mm thick PUFF insulated internal Panels in the mortuary cold- room of non-corrosive 304 grade Stainless. The SS panels will be sandwiched PUFF insulated of 80 MM thick having density 40kg/M3 including Camlocks. Both side covered by 0.5 MM thick SS sheet of 304 grade. It will be having heat resistance capacity as well as enabling washing & cleaning the cold-room internally. | 393.75 | Sq.Mtr | - | - |
| 2 | D-composed Body Cold Room
Supply & erection of 80 mm thick PUFF insulated internal Panels in the mortuary cold- room of non-corrosive 304 grade Stainless. The SS panels will be sandwiched PUFF insulated of 80 MM thick having density 40kg/M3 including Camlocks. Both side covered by 0.5 MM thick SS sheet of 304 grade. It will be having heat resistance capacity as well as enabling washing & cleaning the cold-room internally. | 142 | Sq.Mtr | - | - |
| 3 | Stainless steel Morgue Door: Supply & erection of 1.060Mtr. W X 2.000 Mtr. height SS Sliding Door with 100% Air tight arrangement having 100 MM thickness , made from (SS 304 sheet) sandwich PUFF insulated. Each door will be having Heavy duty Stainless steel Hinges, handles, Door Gaskets etc. | 3 | Job | - | - |
| 4 | Air-cooled condensing units: (Fresh Body Area) Refrigeration Units of aggregate capacity 20 TR (72000 BTU/Hr.) each consists of Scroll compressor (Emerson or Similar make), Air-cooled Blue finned copper Cond. Coil of Kuler / Guntner make of 1 fin/ 4 mm, of Max. operating pressure 32 bar, along with drive package like single phase motor with Fan blade, Suction Accumulator, Service Valves & PLC Control’s etc. with 100 % standby arrangement working on R404A Ref.The approx. power consumption will be 2.3 Kw/Hr. The weight of the Cond. . Unit will be 300 Kg. / Unit. Set Of ( 2 X 11 TR Aircoold oudoor unit per System) | 4 | Unit | - | - |
| 5 | Air-cooled condensing units: (De-composed Body Area) Refrigeration Units of aggregate capacity 8 TR (3800 BTU/Hr.) each consists of Scroll compressor (Emerson or Similar make), Air-cooled Blue finned copper Cond. Coil of Kuler / Guntner make of 1 fin/ 4 mm, of Max. operating pressure 32 bar, along with drive package like single phase motor with Fan blade, Suction Accumulator, Service Valves & PLC Control’s etc. with 100 % standby arrangement working on R404A Ref.The approx. power consumption will be 2.3 Kw/Hr. The weight of the Cond. Unit will be 240Kg. / Unit. | 2 | Unit | - | - |
| 6 | Supply, erection, testing & Commissioning of floor mounted Evaporative Units for Fresh Body Morgue Room. The outer skin will be of 0.63 mm Pre coated GSS, Inner skin will be of 0.63 mm Plain SS with 80 MM thick sandwiched PUFF insulated panel AHU consisting of 8000 CFM, 75 MM static Axial Fans & Electronic defrostic system. The Evaporator section will be consisting of 6 Row Dx cooling coil complete with Expansion valve, drier core, distributer, Sporlan Dx Expansion valves with Power elemnt suitable to work with R 404 refrigerent. The Axial fan motor will be of TEFC 7.5 HP/230 Volts50 HZ. The Evaporator is designed to achieve 0 Deg. Cent.( +/- 2 Deg. C.)Temperature In Room. The AHU consists of Supply Air connection & Mixing Box for & Return Air. | 2 | Nos | - | - |
| 7 | Supply, erection, testing & Commissioning of floor mounted Evaporative Units for Fresh Body Morgue Room. The outer skin will be of 0.63 mm Pre coated GSS, Inner skin will be of 0.63 mm Plain SS with 80 MM thick sandwiched PUFF insulated panel AHU consisting of 3200 CFM, 75 mm static Axial Fans & Electronic defrostic system. The Evaporator section will be consisting of 6 Row Dx cooling coil complete with Expansion valve, drier core, distributer, Sporlan Dx Expansion valves with Power elemnt suitable to work with R 404A refrigerent. The Axial fan motor will be of TEFC 2 HP/230 Volts50 HZ. The Evaporator is designed to achieve 0 Deg. Cent.( 0 Deg. C.)Temperature In Room. The AHU consists of Supply Air connection & Mixing Box for & Return Air. | 2 | Nos | - | - |
| 8 | Stainless Steel make (304 grades) Tray 3 tier Rack for storing of 3 Body in each rack. The Overall dimensions of the Rack will be 2000 X 700 X 1676 MM H. The Rack will be fabricated with SS Angle size 40 x 40 x1.6 MM equipped with 100 MM dia. Heavy duty industrial wheel with stopper arrangement to move the rack in the Mortuary for cleaning purpose. The Tray will be removable type to enable easy shifting of body from the tray. The SS Heavy duty C channel will be provided into rack as travel rail for the SS tray for smooth movement of Trays in the racks. | 19 | Nos | - | - |
| 9 | Stainless Steel make (304 grades) Tray 3 tier Rack for storing of 3 Body in each rack. The Overall dimensions of the Rack will be 2000 X 800 X 1676 MM H. The Rack will be equipped 100 MM dia. Heavy duty industrial wheel with stopper arrangement to move the rack in the Mortuary for cleaning purpose. The Tray will be removable type to enable easy shifting of body from the tray. The SS Heavy duty C channel will be provided into rack as travel rail for the SS tray for smooth movement of Trays in the racksfor easy & smooth movement of Trays in the racks. | 4 | No | - | - |
| 10 | Providing & installing Hydraulic Trolley for movement of Dead Body in morgue as per following Tech. Specifications.
Hydraulic Lift Trolley Size : It shall be made of SS-304 grade sections & sheets having overall size 2032 mm× 610 mm × 2103 mm.(+/-10 mm variations)
Load carrying Capacity: 250 Kgs. Finish: Matt Polish SS.
Construction : SS 304 Complete structure (except Hydraulic Pump & Castors)
SS Sections used: box pipes (50mm x 25mm), round pipes (25mm dia), flats as required. 2.Platform for Stretcher: Open-type to suit the above stretchers.
Lifting System: Stretcher is lifted by a single acting hydraulic cylinder manually by a Foot pump. 3.The Foot-pump : It should be made of Mild Steel and is duly Nickel chrome Plated for long life. 4. Lowering System: By Foot-operated Release pedal. The Stretcher will rest at Lowest level 5. Fully Lowered Platform Height: 450 mm. (Approx). 6.Fully Lifted Platform Height: 1600 mm. (Approx). Wheels: The Trolley is easily maneuvered by Steering on 2 nos. Swivel Castors with 125mm Ø x 50mm width ball bearing Polymer-PU bonded Wheels fitted at the rear end. At the front end, there are 2 nos. Fixed Castors of same size & type. Operating system: The Trolley having 1 no. empty stretcher placed on the platform can be taken to the site as required with ease. The Trolley then needs to be locked in position by using the floor lock provided near the handle. The cadaver shall be kept on the trolley stretcher manually. The trolley can now be taken to the Mortuary cold room for storing. On reaching the place, the stretcher has to be raised /lowered to required height by Manual- Hydraulic Foot-pump. Once the stretcher is in the line with the channels of the rack, the stretcher can be pushed in place from the trolley platform to rack with easy movement. The Platform can now be lowered by operating the Pressure Releasing Switch, thus trolley is ready for other . | 1 | Each | - | - |
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.50 MB
BOQ_2288933.xls
BOQ • 1.07 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .