Const. of modernization of Jeevika Bhawan at existing DRDA Shops near DC Office Complex Udhampur.

Amount

Demolishing cement concrete manually/ by mechanical means including disposal of material.

1:3:6 or richer mix

1:4:8 or leaner mix

Dismantling doors, windows and clere-story windows (Steel or wood) shutter including chowkhats, architrave, hold fasts etc. Complete and stacking within 50 mtrs. Lead of area beyond 3 Sqm.

Demolishing brick work manually / By Mechanical means incl. stacking of serviceable material and disposal of unserviceable Material with in 50 mtr. Lead (in cement mortar).

Earth work in excavation by manual means in trenches for foundations, drains, pipes, cables etc. (Not exceeding 1.5 mtr in width & for shafts, wells, cesspits & the like not exceeding 10 sqm on plan, depth upto 1.5 m including disposal of excavated earth upto 1 mtr from cutting edge, disposed earth is to be levelled & neatly dressed. All kinds of soil

Providing & laying in position cement concrete of specified grade excluding the cost of centering and shuttering -- All work upto plinth level 1:5:10 (1 cement : 5 coarse sand : 10 graded stone agg. 40 mm nominal size) Nallah.incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Reinforced cement concrete work in walls, (any thickness) including attached pilasters, buttresses, plinth & string courses, fillets, columns pillars, piers, abutments, posts and struts, etc. upto floor 5 – level , excluding the cost of centering , shuttering , finishing and reinforcement. 1:1 ½ :3 (1 cement : 1 ½ coarse sand : 3 graded crushed stone aggregate 20 mm nominal size) incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Reinforcement for RCC works incl. straightening, cutting, bending, placing in position & binding all complete cold twisted bars. incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Brick work with common burnt clay F.P.S (non- modular) bricks of class designation 75 in foundation and plinths in cement mortar 1:6 (1cement : 6 coarse sand). incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

Extra for brick works in super structure above plinth level up to floor five level. incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

Half Brick masonry with bricks of class designation 75 in foundation and plinth in cement mortar 1 : 4 (1 cement : 4 coarse sand) incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Extra for half brick masonry in superstructure above plinth level up to floor V level. incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Centering & shuttering incl. strutting , propping etc. and removal of form work for :-

Foundations, footings, bases of columns etc.

Lintels, beams, plinth beams, girders, bressumers and cantilevers.

Columns, pillars, piers, abutments, posts and struts.

Suspended floors , roofs, landings, balconies, & access platform.

Edges of slabs and breaks in floor and walls under 20 cm wide.

Providing and fixing wood work in frames of doors, windows, clerestory windows & others frames, wrought framed & fixed in position with holdfast lugs or with dash fasteners of required dia & length (hold fast lugs or with dash fasteners shall be paid for separately) salwood.

Providing 40x5 mm flat iron holdfast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts & wooden plugs & embedding in cement concrete block 30x10x15 cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)

Providing & fixing panelled or panelled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished off required size with necessary screws excluding panelling which will be paid for separately, all complete as per direction of engineer- in charge. Second class Deodar wood. 35 mm thick.

Providing & fixing panelling or panelling & glazing in panelled and glazed shutters for door, windows & clerestory windows (area of opening for panel inserts excl. portion inside grooves or rebates to be measured) panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. Particle board 12 mm thick plain particle board flat pressed 3 layer or graded wood particle board medium denesity grade I IS: 3087 marked

Proving & fixing 35 mm thick wire gauze shutters using galvanised M.S wire gauze of average width for aperture 1.4 mm both direction with wire of dia. 0.63mm for doors, windows & clerestory windows with hinges & necessary screws. Second class deodar wood.

Providing & fixing glazed shutters for doors , windows and clerestory windows using 10 Kg / Sqm. (4 mm thick) float glass panes , incl. ISI marked M.S pressed butt hinges bright finished off required size with necessary screws 35 mm thick of second class Deodar wood.

Renewing glass panes, with wooden fillets wherever necessary glass panes weighing 10 kg/ sqm. (for fixed portion)

Providing and fixing wooden moulded beading to door and window frames with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class Teak wood 50x12 mm.

Supplying and fixing rolling shutters of approved make made of required size M.S laths interlocked together through their entire length and jointed together at the end by end locks mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete including the cost of providing and fixing necessary 27.5 cm long wire springs manufacture from high tensile steel wire of adequate strength confirming to IS 4454 part 1 and M.S top cover of required thickness for rolling shutters 80x1.25 mm M.S laths with 1.25 mm thick top cover

6mm thick cement plaster to ceiling of mix 1:3 (1 cement : 3 fine sand).incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

12 mm cement plaster of mix 1:4 (1 cement: 4 coarse sand). incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand). incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

15 mm cement plaster on the rough side of single or half brick wall of mix 1:6 (1 cement : 6 coarse sand) incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

Providing and applying white cement based putty of average thickness 2 mm, of approved brand and manufacture, over the plastered wall surface to prepare the surface even and smooth complete.

Finishing wall with acrylic smooth exterior paint of required shade on new work (Two or more coats applied @ 1.67 litre/10Sqm over and including base coat of water proofing cement paint applied @ 2.2 kg/10 sqm.

Providing & fixing M.S grills of required pattern in frames of windows etc. with M.S flats, square or round bars etc. Including priming coat with approved primer all complete. Fixed to openings / wooden frames with raw / plugs, screws etc.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Providing and laying damp- proof course 40 mm thick with cement concrete 1:2:4 (1 cement :2 coarse sand: 4 graded stone aggregate 12.5 mm nominal size) crushed. incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Providing & laying in position cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded brick agg. 40 mm nominal size).incl all carriage lead, lift, loading/ unloading/handling/ rehandling Complete

Providing & laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS :15622 of approved make in all colours and shades , laid on 20 mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc. complete ; Size of tile 60x60 cm incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Providing & fixing ceramic glazed floor tiles 300x300 mm (thickness to be specified by the manufacturers) of 1st quality conforming of IS: 13755 of NITCO, ORIENT, SOMANY , KAJARIA or equivalent make in colour such as White Ivory , Grey, Fume red brown laid on 20 mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand) incl. pointing the joints with white cement & matching pigment etc. complete.

Providing and fixing 1st quality ceramic glazed tiles conforming to IS: 13753 of minimum thickness 5 mm of approved make like NITCO, ORIENT, SOMANY, KAJARIA, or equivalent make in all colour , shades except burgundy, bottle green, black of any size as approved by Engineer In Charge in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 Kg per Sqm. Incl. pointing in white cement mixed with pigment of matching shade complete. incl all carriage lead, lift, loading/ unloading/handing/ rehanding Complete

Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1:4 (1 cement : 4 coarse sand). 25 mm thick

Kota stone slab 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement :3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Providing & fixing white vitreous china pedestal type water closet(European Type W.C pan) with seat & lid, 10 litre low level P.V.C flushing cistern including flush pipe with manually controlled device (handle lever) conforming to IS: 7231, with all fittings & fixtures, complete including cutting & making good the walls & floors wherever required W.C pan with ISI marked white solid plastic seat & lid.

Providing & fixing white vitreous china wash basin including making all connections but execluding the cost of fittings flat back wash basin of size 630x450 mm

Providing & fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings

Providing & fixing water closet squatting pan (Indian Type W.C pan) with 100 mm sand cast iron P or S trap. 10 litre low level P.V.C flushing cistern (of approved make) with manually controlled device (handle lever) conforming to IS: 7231, with all fittings C.I./ M.S brackets, 32 mm diameter flush pipe with fittings and clamps, over flow arrangement with specials and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required. stainless steel AISI-304 (18/8) Orissa pattern W.C pan of size 585x480 mm with flush pipe & integrated type foot rests

Providing & fixing C.P brass bib cock of approved quality confirming to IS 8931: 15 mm nominal bore. (Parry ware, Cera, etc).

Providing and fixing C.P brass long nose bib cock of approved quality confirming to IS standards and weighing not less than 810 grams 15 mm nominal bore.

Providing and fixing C.P. brass angle valve for basin mixer and gyser points of approved make conforming to IS : 8931. 15mm nominal bore.

Providing and fixing C.P brass close hole basin mixer pillar tap of approved quality and make weighing not less than 1.970 kg 15 mm nominal bore of standard back type.

Providing and fixing PVC waste pipe for sink or wash basin including PVC waste fitting complete flexible pipe 32mm dia.

Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing unplasticised PVC connections pipe with brass unions 30 cm length 15 mm nominal bore.

Proving & laying on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked indicating the BIS License No. with cover and suitable locking arrangement and making necessary holes for inlet, outlet and over flow pipes but without fittings and the base support for tank (Sintex, Electroplaste Star, Lotus or equivalent having valid ISI License).

Providing & fixing G.I. pipes complete with G.I fittings and clamps, including cutting and making good the walls etc. Internal work-Exposed on wall

15 mm dia nominal bore (Medium)

20 mm dia nominal bore (Medium)

Providing & fixing on wall face unplasticised- Rigid P.V.C rain water pipe confirming to I.S – 13592 type –A incl. jointing with seal ring confirming to I.S- 5382 leaving 10 mm gap for thermal expansion 110 mm dia

Providing & fixing wall face unplasticised- Rigid P.V.C rain water pipe confirming to I.S – 13592 type –A incl. jointing with seal ring confirming to I.S- 5382 leaving 10 mm gap for thermal expansion 75 mm dia

Providing & fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes confirming to IS:13592 type A including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion Bend 87.5* 110 mm dia

Providing & fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes confirming to IS:13592 type A including jointing with seal ring confirming to IS: 5382 leaving 10 mm gap for thermal expansion Bend 87.5* 75 mm dia

Providing & fixing 600 x 120 x 5 mm glass shelf with edges round of supported on anodized aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc. complete.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arrangements of approved quality and colour 450 mm long towel rail with total length of 495 mm, 78 mm wide and effective height of 88 mm, weighing not less than 170 gms.

Providing & fixing PTMT grating of approved quality and colour circular type 100 mm nominal dia

Providing & fixing aluminium tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete.

Providing & fixing aluminium handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade with necessary screws etc. complete.

Providing & fixing IS: 3564 marked Aluminium extruded section body tubular type universal hydraulic door closer, (Having superior brand) embossed on the body, door weight upto 36-80 kg and door width upto 700-1000 mm with double speed adjustment with necessary accessories and screws etc. complete.

Providing & fixing aluminium sliding door bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts & screws etc. complete. 250x16 mm dia

Providing & fixing aluminium hanging floor door stopper ISI marked anodized (anodic coating not less than grade AC-10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete Twin rubber stopper.

Filling available excavated earth (excl. rock) in trenches , plinth , sides of foundations etc in layers not exceeding 20 cm in depth consolidating each deposited layer by ramming & watering, lead up to 50 m & lift up to 1.5 m.

Anil Kumar