41/EUDC (Chowk)/LESA/2024-25

Amount

Safe carriage, loading-unloading with proper stacking of following material from ESC-Daliganj to Work Site/JE -Dump Store–

33KV XLPE CABLE 3X300 Sqmm

33 KV END TERMINATION O/DOOR & I/DOOR 3X300 SQ MM

33 KV ST/TH C/J KIT 3X300 SQ MM

11 KV XLPE Cable 3x185 Sqmm

11 KV END TERMINATION O/DOOR & I/DOOR 3X185 SQ MM

11 KV ST/TH C/J KIT 3X185 SQ MM

ACSR Dog Conductor

STP Pole 11 Mtr Long

Disc Insulator (B &S Type)-70 KN 33 KV

Safe carriage loading unloading with proper stacking of following material from JE dump store to work site.

33KV XLPE CABLE 3X300 Sqmm

33 KV END TERMINATION O/DOOR & I/DOOR 3X300 SQ MM

33 KV ST/TH C/J KIT 3X300 SQ MM

11 KV XLPE Cable 3x185 Sqmm

11 KV END TERMINATION O/DOOR & I/DOOR 3X185 SQ MM

11 KV ST/TH C/J KIT 3X185 SQ MM

ACSR Dog Conductor

STP Pole 11 Mtr Long

Disc Insulator (B &S Type)-70 KN 33 KV

Supply of 11 KV RMU 3 way

Fabrication & erection of S/S type double pole for 11KV line on 11 M long ST pole with fixing of necessary clamps & other acessories.

Stringing of ACSR Dog Conductor. All the materials supplied by contractor except ACSR Dog Conductor)

Hoisting of 33 KV 3x300 Sq. Mm XLPE cable on existing pole. Cable will be passed through GI Pipe. (All the materials will be arranged by the contractor).

High Pressure testing of 33 KV 3x300 sqmm. XLPE cable with DC voltage at 18 KV with hold up to 5 minutes.(All the material will be arranged by the contractor).

S/C Laying of 11 KV 3x70/185 sqmm in HDPE Pipe

S/C Cable laying Mannual Method

High Pressure testing of 11 KV XLPE cable. Testing equipment will be arranged by the contractor.

Chemical Earthing system with outer pipe diameter 50mm, inner Strip 40x6, length 3000 mm. galvanization up to 200 micro, earthing pipe with crystalline conductive mixture filled inside the pipe with anti-corrosion & high conductive along with 50 Kg(As per required) of BFC which should be capable to reducing the soil resistively with good moisture retaining capacity.(Specification of chemical earthing and drawing is hereby enclosed). All material shall by supply by the contractor.

Providing earthing strip size 50x6mm and connecting from earthing pipe/m.s.earting rod to fuse unit/tronsformer body/ neutral earthing(Earthing rod & earthing strip arranged by contractor).

Grouting of pole in depth of 1/6 the length of pole in ratio 1:4:8 in cement sand and brick balast as per RESPO norms.

Construction of pole plinth 300mm x 450 mm above ground level in 1:2:4 in cement, coarse sand and stone gritt as per RESPO norms.

Painting of new erected pole with two coat of red oxide paint,PO red paint at top of pole 2 M & balance by two coats of best quality aluminium paint ISI of Burger/Nerolac/Asian mark as per norms.

Hoisting of 11 KV XLPE Cable/RMU

Plinth for RMU

Wiremesh Fencing for RMU

Installation of 3 Way RMU

Making Heat & shrinkables joints of following sizes and types for 11/33 KV XLPE cable (Jointing kit will be provided by deptt. )

Indoor/Outdoor end termination kit for 11 KV 3x185 sqmm XLPE cable

Indoor/Outdoor end termination kit for 33 KV 3x300 sqmm XLPE cable

11 KV ST/TH C/J KIT 3X185 SQ MM

33 KV ST/TH C/J KIT 3X300 SQ MM

P.S. ENTERPRISES (BID ID -4823964)