Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance B 13 ROOM NO 2 2 SHIVA PALM BEACH SOCIETY SECTOR4 NERUL WEST NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance NOT AVAILABLE | Admitted-Finance |
Tender Value
₹29.5 L
EMD Value
₹60,000
Closing Date
29 Jun 2020, 6:00 pmClosed
GE NW NOFRA
GE NW NOFRA DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI
ADDITION/ ALTERATION TO TOILET BLOCKS OF BUILDINGS P-1 AND P-2 AT COLABA MUMBAI AND ADDITION/ ALTERATION TO ELECTRICAL FITTINGS AND FIXTURES AT PASTA LANE COLABA MUMBAI
2020_MES_327817_5
8733
Open Tender
Civil Works
Item Rate
180 days
MUMBAI
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE NW NOFRA
₹60,000
Yes
6 Jul 2020
16 Jun 2020
4 Jul 2020
16 Jun 2020
29 Jun 2020
16 Jun 2020
Amount
ADDITION/ ALTERATION TO TOILET BLOCKS OF BUILDING P-1 & P-2 AT COLABA, MUMBAI
Taking down of chowkhats or frames without taking off shutters from the frame not exc 1.5 Sqm each, complete all as specified and directed.
Taking down of chowkhats or frames without taking off shutters from the frame exc 1.5 Sqm but n.exc 4.00 Sqm each, complete all as specified and directed.
Dismantling floor, hearth or wall tiling (fixed at any portion but not backing) including cement mortar bedding and removing and removing rubbish off the premises (outside MD land) complete all as specified and directed.
Demolition of brickwork or stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles & ht. upto 16th floor of bldg., complete all as specified and directed.
Demolition of reinforced cement concrete of any description and in any position, complete all as specified and directed.
M&L for Brickwork with subclass ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in CM 1:4, complete all as specified and directed.
M&L for Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, edges etc. also splays between floors and beams, etc.complete all as specified and directed.
Reinforced cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like, complete all as specified and directed. MAKE of Cement : ACC Gold, Ultratech Premium, Ambuja Plus.
M&L for Polished granite stone slab 16 to 18mm thick coloured as in cooking platforms , set and jointed with 20mm thick cement mortar 1:4 and pointed in white cement 1:2 mixed with pigment to match the shade of slab, including moulding at front edge complete all as specified and directed in platforms. Note : Quality of granite all as approved by GE .
M&L coloured non-skid ceramic tiles 7-8mm thick rectified glossy (square/rectangular) area of each tiles exceeding 0.06 sqm but not exceeding 0.11sqm in floors etc , set and jointed in neat cement slurry and pointed in white or coloured cement match to existing complete all as specified and directed. MAKE : Kajaria or Somany or Orient bell
M&L for coloured glazed ceramic tiles as in vertical surface, of size exc 0.06 Sqm and not exc 0.16 Sqm 7-8mm thick as approved by GE as in dado/skirting or on vertical surface, over and including 10mm thick backing coat in CM 1:4,set and jointed in neat cement slurry and pointed in white or colour cement match to existing complete all as specified and directed. MAKE : Kajaria or Somany or Orient bell
Taking down cement plaster on brick wall including raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.
Material & Labour for rendering 15mm thick CM 1:6 on fair face of brick work or concrete surfaces of walls and finised surfaces even and smooth without using extra cement complete all as specified and directed. MAKE of Cement : ACC Gold, Ultratech Premium, Ambuja Plus.
Material & Labour rendering 10 mm thick cement plastering on ceiling surfaces in CM (1:4) finished even and smooth without using extra cement all as specified and directed, as in ceiling. MAKE of Cement : ACC Gold, Ultratech Premium, Ambuja Plus.
Material & Labour preparation of new plastered or unplastered surfaces of walls including scrapping and applying two coats of oil bound distemper over layer of smooth putty finish punning 3mm thick over a coat of primer strictly as per manufactuure instruction with smooth roller finish complete all as specified and directed. MAKE : Asian Paint Tractor UNO or Berger Bison Distemper or its equivalant in nerolac.
Material & Labour preparation of new plastered or unplastered surfaces and applying three coats of white wash on ceiling, complete all as specified and directed. MAKE : Surya Cem or Asian Paint or Nerolac.
S & F in repairs solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube fixing in existing opening including necessary hold fast and filling concrete all and as specified and directed and sample shall be approved by GE.
S & F in repairs factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail on either side. Panelling of fplain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles. & rails with suitable PVC sheet beading, and joined together with solvent cement adhesive etc complete as specified and directed and sample shall be approved by GE. Make :- Rajshree, Sintex, Jain wood industries
S&F of stainless steel butt hinges medium weight of size 75mm complete all as specified and directed.
S&F in extruded aluminium alloy handle fabricated type anodized 100mm long complete all as specified and directed. Make : Bharat or Classic or Argent
S&F in Aluminium alloy anodised barrel tower bolt 100mm long complete all as specified and directed. Make : Bharat or Classic or Argent
Taking up or down 15mm bore steel tubing and connections ,complete all as directed.
Taking up or down 20mm bore steel tubing and connections ,complete all as directed.
S&F Steel water tubing galvanised medium grade (ISI marked) of 15mm bore, with all fittings fixed complete to walls and ceiling or laid in floor/wall/ ceiling (including scaffolding) complete all as specified and directed. Make: TATA , Jindal , Zenith
All as per iterm No. 26 but 20mm bore of pipe & ditto
S&F Low density poly ethylene pipes (LDPE) of pressure rating 6kg/ cm2 and fixed to walls , ceiling, waste coupling, complete all as specified and directed. Make : Dutron , Finolex , Astral
M&L for cement concrete type D2 (1:4:8) using 40mm graded stone aggregate in foundation, filling & mass concrete , sub-base etc. , complete all as specified and directed.
Taking down Cast iron of 100mm bore fixed on wall or floor at any floor/ any height/ any location including all fittings & including scaffolding upto 16th floor of building complete all as specified and directed.
Taking down Cast iron of 75mm bore fixed on wall or floor at any floor/ any height/ any location including all fittings, complete all as specified and directed.
S&F 100 mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall, complete all as specified and directed. Make of CI Pipes and fittings : NECO , Electro steel , Kalinga
S&F 75mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste fixed to wall, complete all as specified and directed.
S&F 100 mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste , laid in trenches or in floors, complete all as specified and directed.
S&F 75 mm bore of sand cast CI soil waste pipe in any length with ears and jointed with neat cement paste , laid in trenches or in floors,complete all as specified and directed.
M&L 75mm cast iron floor trap with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) including complete all as specified and directed.
S&F stainless steel grating cover to suit the 100mm/75mm dia nahani trap fixed with cement complete all as specified and directed.
S&F 75mm sand cast CI Branch pieces (Tee), Single (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall or roof at any floor/ any height/ any location including all fittings complete all as specified and directed by Engr-in-Charge. Make of CI Pipes and fittings : NECO , Electro steel , Kalinga
S&F 100mm sand cast CI Branch pieces (Tee), Single (equal), ordinary or inverted (spigot or socket type) or with parallel branches with ovel access door and jointed with neat cement paste to CI pipes fixed to wall & including scaffolding upto 16th floor of building complete all as specified and directed.
S&F 75mm bore Bends with oval access doors (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F 100mm bore Bends with oval access doors (any radius), diminishing pieces or tapers (larger bore measured) complete all as specified and directed.
S&F 75mm bore Bends (any radius) with duck's foot or heel rest with oval access door, complete all as specified and directed.
S&F 100mm bore Bends (any radius) with duck's foot or heel rest with oval access door, complete all as specified and directed.
S&F stack clamps suitable for securing 75 / 100mm dia CI pipe made out of 50mm by 5mm flat iron and 16mm dia round iron stays Including bolts and nuts and securing ends of stays fixed to wall & including scaffolding upto 16th floor of building complete all as specified and directed.
Supply and fixing in repairs bib tap 15 mm dia ,CP cast copper alloy with crutch or butterfly handle screwed down for iron pipe or for brass ferrule complete all as specified and directed. Make: ESSCO or its equivalent in Jaquar or Kohler.
S&F in repairs 15mm pillar taps, cast copper alloy with captain heads chromium plated, fancy type screw down high pressure with long screwed for iron pipe complete all as specified and directed. Make: ESSCO or its equivalent in Jaquar or Marc.
S&F as in repairs 15mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in positioncomplete all as specified and directed. Make : Leader , Zoloto , Gem
S&F as in repairs 20mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed ,with suitable fittings fixed new line and in position complete all as specified and directed. Make : Leader , Zoloto , Gem
Supply and fixing in repairs angular stop valve cast copper alloy ,screwed down ,high pressure or butterfly handle screwed both ends for iron pipe or for union and fix of size 15 mm bore Make: ESSCO or its equivalent in Jaquar or Kohler.
Supply and fixing in repairs angular stop valve cast copper alloy ,screwed down ,high pressure or butterfly handle screwed both ends for iron pipe or for union and fix of size 20mm bore complete all as specified and directed. Make: ESSCO or its equivalent in Jaquar or Kohler.
Supply and fixing in repairs over head shower rose complete all as specified and directed. Make: Jaquar, Kohler, Marc.
S&F sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm, complete all as specified and directed. Make: Diamond Blanco or its equivalent in Bluestar / Nirali.
S&F in repair wash hand basin vitreous china white counter top type oval shaped of size 550mm minimum including waste cupling waste pipe and suitable PVC connection pipe etc. complete all as specified and directed. Make : Jaquar or its equivalent in Hindware 1st Quality , CERA 1st quality.
M&L Vitreous water closet (orissa pattern) 'long pan', white with 'P' or 'S' trap, front or back inlet any pattren and fixed as in repairs complete all as specified and directed. Make : Jaquar or its equivalent in Hindware 1st Quality , CERA 1st quality.
S&F in repairs 10 ltr cap PVC Valveless, syphonic action type, flushing cistern low level all accesories complete all as specified and directed. Make : Jaquar ESSCO Cat Part No. WHE-183L , Sleek essence series of Hindware , CERA 1st quality.
S&F in repairs tubular towel rail brass chromium plated 20mm dia D type 60cm long between flanges including a pair of brackets complete all as specified and directed. Make : ESS ESS , Jindal , KICH.
S&F 32mm dia PVC (flexible) waste pipe complete all as specified and directed.
S&F 450 mm long PVC connections with PTMT nuts etc complete all as specified and directed.
Material & Labour Preparation of old painted wood or wood based surfaces of any description exc 10 cm width or girth and applying two coat of synthetic enamel paint with smooth roller finish etc complete all as specified and directed. MAKE of Synthetic Enamel Paint : Asian ( Apcolite) or Nerolac ( Hi- gloss) or Berger (Luxol Hi- gloss)
M&L Preparation of old plastered surfaces of ceiling and applying one coat of white wash complete all as specified and directed. Make : Surya cem , Asian , Berger
Preparation of new steel surfaces & apply two coats of synthetic enamel paint over a coat of red oxide, complete all as specified and directed. MAKE of Synthetic Enamel Paint : Asian ( Apcolite) or Nerolac ( Hi- gloss) or Berger (Luxol Hi- gloss)
M&L for cutting holes in brick wall exc half brick but n.exc one brick built in cement mortar for inserting pipes ,bend etc and making good in cement concrete 1:2: 4 type B 1 as required, complete as specified and directed.
S&F 2000 ltr Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I and including float valve complete all as specified and directed. Make ; Sintex , Rotex , Infra
M&L for TMT Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.
S&F aluminium anodised various section powder coated as required for doors, window & partion etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement for shutter, sealant etc complete all as specified and as directed. Note:-Aluminium doors, window & partion to be fixed with cadmium plated screw not less then 300 mm C to C & cealing the joints between frames & kota stone with polysulphide sealant as per the manufactures instruction".
S&F in repair aluminum anodised GRILL (Deco grill DG 103 of 7.5 mm thick of M/s ELESAR FOCCHI Ltd.) fixed with suifable 'F' section No. 8584 15.30 x 23.40 x 1.40mm fabricated and rivetted to aluminum windows, complete all as specified and directed by Engr-in-charge.
S&F in stainless steel wire cloth (Wire dia 0.36 mm) and average width of aperture 1.40 mm and fixed with and including Ilnd class hard wood beading complete as specified and directed .
Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden bead complete all as specified and as directed.
S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete all as specified and as directed.
Resecuring or easing & adjusting without taking down shutters of any description exc 1 sqm and n.exc 2 sqm each complete all as specified and directed.
M&L for roughening surfaces of old concrete surfaces by picking, sweeping cleaning and washing down with water to remove dust etc including taking down tarfelt and 15 mm thick screeding in cement mortar 1:4 finished even and smooth without using extra cement including mixed with water proofing compound as per manufacturer instructions (Note : WPC shall be measured and paid separately).
Providing water proofing treatment with five layered 4 mm thick APP (Atatic poly propylele) modified bituminous membrane re-inforced with non woven polsster mat of weightr 180 gms/sqm as centre core and without multiple layers of polythene finished on top and bottom with 7 micron thick flammable polythlene applied by the thermo fusion using LPG finishing the treatment with one coat of bitumen and one coat of aluminium paint over APP membrane (An overlap of 100 mm & 150 mm shall be provided on sides ends respectively) Notes :- (i) Irrespective of lap the net covered area shall only be measured and paid (ii) The quoted rate shall be deemed to be inclusive of primer for APP membrane and SBR latex complete. (iii) The quoted rate shall be inclusive of one coat of aluminium paint & one bitumen coat @ 1.2 Kg/Sqm over APP membrane & finishing with two coats of solar reflective bituminous aluminium paint @ 0.10 Kg/Sqm as prescribed by manufacturer of membrane. Make : STP Ltd , IWL Ltd , Pidilite , Tiki Tar .
Treatment of sunken floor slab compraises of the following specifications and all as specified :-
(i) M&L for cleaning the sunken/lowered portion of RCC slab surface (including vertical total depth plus skirting height) of floors by wire brush, chisel out any mortar sticking to the surface and brooming completely. 40mm thick avg PCC 1:2:4 type B-0 using 12.5mm graded aggregate as in padding conc to achieve proper slope including cutting holes in bricks or RCC wall for spout (Note : Cost cutting holes and pipes shall be measured and paid separately)
(ii) Rendering of uneven surfaces with 6mm thick CM 1:4 mixed with integral water proofing compound @ 3% by wt of cement consumed. Fill it with water and check dampness and seepage. Where dampness/ seepage is noticed, nozzles shall be fixed and grouting carried out. (Note : WPC shall be measured & paid separately)
(iii) All junctions points of side wall where CI/GI pipes are passing through shall be sealed with epoxy puty.
(iv) After drying putty, wash the slab and sides of sunken portion with water and make it clear and clean.
(v) M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion all as specified and directed. (Note :This item shall be measured and paid separately)
(vi) Plaster the bottom and sides up to bottom of the skirting with minimum 20mm thick CM 1:4 mixed with integral water proofing compound 3% by wt of cement consumed as per manufacturer's specification including rounding of corners and junctions sloping towards spout. (Note : WPC shall be measured & paid separately)
(vii) All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round after painting with anticorrosive paint (Note : This item shall be measured & paid separately)).
Note :- Test the water proofed area (ponding test) by filling water for at least 72 hours and tested for leakage seepage and to the entire satisfaction of GE. Test shall be done in presence of reps of PMG and record for each sunken slab shall be maintained. Cost of testing is inclued in the rates quoted above.
S&F for GI pipe 50mm dia medium grade laid on sunken floor complete all as specified and direced by EIC.
All pipes laid in sunken portion shall be covered with 50mm thick PCC 1:3:6 all round including painting with anticorrosive paint complete all as specified and direced by EIC.
M&L for applying two coats of polymer modified cementious water proof coating as per manufacturs instruction to bottom and vertical sides up to finished floor level+100mm height. The thickness of two layer shall be 1mm. When the second layer is still sticky, coarse sand spray shall be carried for the vertical and bottom surface of the sunken portion complete all as specified and direced by EIC. Make :- Pidilite, Sico, Dr fixit .
M & L Injection grouting in RCC slab shall be cast/laid to the slope as directed/as per site conditions. After RCC slab is laid, cured and fully set, water shall be ponded in the sunken slab portion as per specified ponding test. The location of seepage/leakage, if any, shall be identified and marked. The portion of the slab where leakage/seepage is observed shall be repaired with grouting at contractor's expences. The area of dripping/leakage shall be cleaned to expose the surface. Mark the spots for injection grouting. If leakage is through a crack, mark grouting points along the crack in a staggered manner. If the leakage is across the area mark grouting spots in a grid pattern. Drill grouting holes so as to neatly fit the injection packers. Drilling to be done at an angle of 45 to the plane of grouting surface. Fix PVC/MS nozzles in the low viscosity, polyurethane resin/epoxy grout using a grouting pump. Repeat the process after 1 or 2 days if the leakage continues at some point. allow to cure for 24 hours and seal the grouting holes appropriately using epoxy putty etc complete all as specified and as directed. Make :- Dr Fixit, Pidilite , equivalent as approved by GE.
Dismantling of old urinals of any size, complete all as specified and directed by EIC.
S&F aluminium decorative type powder coated brackets suitable for 20mm dia curtain rod or similar articles complete all as specified and directed
S&F 20mm dia aluminium decorative type powder coated curtain rod or similar articles complete all as specified and as directed .
Excavation in trenches not exc. 1.5 mtr wide and not exc 1.5 mtr deep in soft/loose soil and getting out complete all as specified and directed by Engineer-in-charge.
Returning filling in soft/loose soil including spreading, levelling, ramming in layers not exc. 25 cm thick all as specified and directed by Engineer-in-charge.
Removal of excavated soils from site to in defence land a distance exc 1.50 Km but not exc 5 Km and depositing where directed at a level not exc 1.5 mtr above the starting point as directed by Engineer-in-charge.
S&F for 200mm bore RCC pipe class NP-2 laid and jointed complete with collers as specified including testing all as specified and directed by Engineer-in-Charge. Make : Himalaya , Everest , Indian Hume pipes
M&L for cement concrete 1:3:6 type C-2 (using 40mm graded stone aggregate) as in bed to drain pipes including forming cradle after they are laid and tested for 200mm bore RCC pipe complete all as specified and as directed by Engineer-in-Charge.
M&L brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:4, complete all as specified and directed
M&L for 15mm thick cement plaster in cement mortar 1:4 on fair faces of brick work finished even and smooth without using extra cement with WPC @ 3% by weight of cement complete all as specified and directed
Supply only integral water proofing compound confirming to IS-2645 , complete all as specified and directed. Make : Pidilie , Scot No 1 , Dr Fixit.
M&L for PCC 1:3:6 type B-1 (using 20mm graded stone aggregate) as in foundations, filling ad mass concrete complete all as specified and directed
M&L for cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in benching, coping, cills steps, parapets, railings up to 60cm in height, water troughs and the like rounded or chamfered on edges including necessary form work complete all as specified and directed
M&L for forming fair finished drain or channel 200mm inner girth in cement concrete, using ex-tra cement, including forms, moulds, mi-tred/stopped ends etc complete all as specified and directed
Cutting into existing manholes for connecting new drain making good to pipe and rendering cutting out existing benching for and forming branch channel (1/2 round or 3/4 Sec) in cement concrete 1:2;4 type BI smooth finished and reforming benching as reqd for 200mm bore of pipe complete all as specified and directed
S&F Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165, complete all as specified and directed
M&L for heavy duty cement concrete interlocking paver tiles 60 mm thick having glossy finish (colour and pattern approved by GE) (tested as per IS 1237-1980) laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compation by means of surface complete all as specified and directed Make : Mehtab , Ultra Tiles , NITCO , Supreme.
M&L for refixing of cement concrete interlocking paver tiles 60/80mm thick laid over and including 50 mm thick dry sand cushioning and voids filled with dry and surface compact, including compation by means of surface vibrator, complete all as manifacture instructions complete all as specified and directed Make : Mehtab , Ultra Tiles , NITCO , Supreme.
ADDITION/ ALTERATION TO ELECTRICAL FITTINGS AND FIXTURES AT PASTA LANE COLABA, MUMBAI
Material and Labour for point wiring complete with 1.5 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes/ modular boxes surfacing on wall including one FRLS PVC insulated & sheathed multistranded green colour copper conductor 1.5 sqmm as earth continuity conductor connected to common earth as earth dolly for :- Make of cable : Polycab, Finolex, Havells. Make of casing & capping : Precision, Supreme, Pressfit
(a) One light point controlled by one switch SP one way.
(b) One ceiling fan point controlled with one 5A switch
(c) One 3 pin socket outlet 5Amps on same board with other switches.
(d) One 3 pin socket outlet 5Amps on independant board.
Material and Labour for point wiring complete with 4 sqmm single core multistranded FRLS PVC insulated unsheathed copper conductors 1100 volts grade drawn through and including PVC non-metallic casing and caping of size not less than 25mm width, ISI marked with accessories fixed on wall/ceiling/truss etc with PVC non metallic ISI marked terminal boxes / modular boxes surfacing on wall including one FRLS PVC insulated & unsheathed multistranded green colour copper conductor 4 sqmm as earth continuity conductor connected to common earth as earth dolly. Make of cable : Polycab, Finolex, Havells. Make of casing & capping : Precision, Supreme, Pressfit
Supply and fix in repair Modular Switch, 6Amp, One way, 1 module. Make : Legrand(Arteor), Havells(Coral), Goldmedal (NIXON).
S&F Modular Blank Plate , One way, 1 module. Make : Legrand(Arteor), Havells(Coral), Goldmedal (NIXON).
S&F Modular Switch , 16Amp, One way, 1 module. Make : Legrand(Arteor), Havells(Coral), Goldmedal (NIXON).
S&F Modular Socket oulet, 6 Amps, 2/3 pin combined 2 module. Make : Legrand(Arteor), Havells(Coral), Goldmedal (NIXON).
Supply and fix in repair Modular Socket oulet, 6/16 Amps, 2/3 pin combined, 2 module complete all as specified and directed. Make : .Make : Legrand(Arteor), Havells(Coral), Goldmedal (NIXON).
Supply and fix in repair Modular metal flush box 3 module complete all as specified and directed Make : Legrand(Arteor), Havells(Coral), Goldmedal (WEGA).
Supply and fix in repair Modular white cover plate with Frame 3 Module complete all as specified and directed. Make : Legrand(Arteor), Havells(Coral), Goldmedal (WEGA).
Supply and fix in repair Modular metal flush box 8 module complete all as specified and directed .Make : Legrand(Arteor), Havells(Coral), Goldmedal (WEGA).
Supply and fix in repair Modular white cover plate with Frame 8 Module complete all as specified and directed. Make : Legrand(Arteor), Havells(Coral), Goldmedal (WEGA).
S&F ceiling rose surface bakelite with ISI mark, flush type with ISI mark three terminals complete all as specified and directed
S&F LED baton integral aluminum body with white acrylic cover of lumen output 1800 -2400 Lux, 3000 to 6500 Kelvin with accessories internally prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed Make- Philips/ Jaquar/ Havells
S&F LED baton integral aluminum body with white acrylic cover of lumen output 1000 -1200 Lux, 3000 to 6500 Kelvin with accessories internall prewired and including connecting up with twin core twisted flexible copper conductor cable of suitable size complete all as specified and directed Make: Philips/ Jaquar/ Havells
Supply and fix submain wiring 2 single core FRLS unsheathed 1100 volts grade cable with stranded copper conductor of size 6 Sqmm in and including PVC casing caping not less than 25 mm dia including 1 single core cable with stranded copper conductor of size 06 sqmm (green colour) for earthing. Make of cable : Polycab, Finolex, Havells. Make of casing & capping : Precision, Supreme, Pressfit Note :- (i) Two runs of 06 Sqmm cable, 1 run of PVC casing caping and 1 run of 06 Sqmm cable shall be measured as 1 RM. (ii) Each submain wiring shall run in seperate PVC casing caping
S&F Ceiling Fan of size 1200mm Sweep, ISI marked, alongwith down rod , Aerodynamic blades for maximum air delivery of 215 m3 / Hr, No of blades -3, fixed to ceiling by means of grouting with nut & bolts and connecting up including provision of flexible 3 core copper cable & testing, smooth functioning at site complete all as specified and directed by the Engineer-in-Charge. Make : Havells or its equivalent in Orient / Philips as approved by GE.
S&F pedestal Fan of size 400mm Sweep, ISI marked, with 2000 RPM for maximum air delivery, No of blades -3, including provision of flexible 3 core copper cable with three pin plug top & testing, smooth functioning at site complete all as specified and directed by the Engineer-in-Charge. Make : Havells or its equivalent in Orient / Philips as approved by GE.
Supply and fix single phase sheet metal powder coated double door distribution board 4 way complete all as specified and directed and comprising with following :- Make: Havells, Legrand,Schneider. (a) MCB SPN 25Amps 240Volts, 10KA - 1 No ('B' Series) (b) MCB SP 6 - 32Amps 240Volts - 2No ('B' Series)
Supply, installation, commissioning of water cooler fully stainless steel, electric driven single phase having approx storage 80 Ltr and nominal cooling capacity 40 Ltr per hour ,complete all as specified and as directed. Make- Blue Star / Aqua gaurd/ Usha/ Voltas.
Supply, installation, commissioning of water purifier wall mounted UV with 60L/Hour capacity ,complete all as specified and as directed. Make- Blue Star / Aqua gaurd/ Voltas
Supply, install,, testing of monoblock pump of capacity 1 HP 50mm dia outlet inclusive of starter, fixing materials and aluminium sheet 2mm thickness cover all as specified and directed by Engineer-in-Charge.
S& F GI tubing , medium grade, with all fittings, complete fixed to walls and ceiling or laid in trenches / floors for the following sizes complete all as specified . (Quoted rate inclusive of cost of necessary GI fittings)
(a) 40mm dia
(b) 50mm dia
Supply and replace gun metal gate valve, with iron wheel head,screwed both ends, class II, and fixed complete including cutting of the pipe line and taking down perished valves wherever required for the following sizes:- Make : Leader , Zoloto , Gem
(a) 40 mm dia
(b) 50 mm dia
Supply and firxing rotational moulded polyethylene water storage tanks of 5000 Ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed. Make ; Sintex , Rotex , Infra
Anil Industrial Corporation
Modern Engineering Co
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .