Loading
Loading…
Loading…
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Tender Value
₹14.9 L
EMD Value
₹29,788
Closing Date
22 Oct 2026, 4:00 pm4d left
Eligibility, documents, scope, Go/No-Go checksEligibility, required documents, scope of work and Go/No-Go checks for this tender, in one click.
Executive Engineer
the Executive Engineer, Irrigation and Public Health Division, Public Works Department, Karaikal
Providing and laying booster line UPVC 160mm dia from Pillaiyar Koil street to Ruby Garden nagar Neravy 1st Main road, Neravy
2026_PWDC3_22961_1
21-01/PW/IPH/2026-27
Open Tender
Pipe Laying Works
Percentage
60 days
Karaikal
Please refer Tender documents.
2 documents required · 2 mandatory
₹525
₹29,788
14 Oct 2026
14 Oct 2026
23 Oct 2026
14 Oct 2026
22 Oct 2026
14 Oct 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavating trenches by mechanical / manual means of required width for pipes, cables, etc including excavation for sockets, metre and dressing of sides, ramming of bottoms, for all depth, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as per direction of Engineer-in-charge, within a lead of 50 m - all kinds of soil - pipes, cables etc exceeding 80mm dia but not exceeding 300 mm dia | 850 | Rum | 337.57 | ₹2,86,934.5 |
| 2 | Constructing masonry chamber 90x90x100 cm inside, in brick work in cement mortar 1:4 (1 cement : 4 fine aggregate) for sluice valve, with C.I.surface box 100mm top diameter, 160 mm bottom diameter and 180 mm deep (inside) with chained lid and RCC top slab 1:1.5:3 mix (1 cement : 1.5 fine aggregate : 3 graded stone aggregate 20mm nominal size), including necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine aggregate: 10 graded stone aggregate 40mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 fine aggregate) 12mm thick finished with a floating coat of neat cement complete as per standard design - with common burnt clay F.P.S. (non modular) bricks of class designation 3.5 | 2 | Nos | 20,463.07 | ₹40,926.14 |
| 3 | Making connection of uPVC distribution branch with Upvc main of following sizes by providing and fixing tee including cutting the pipe etc., compete.-110 mm dia to 160 mm dia nominal bore. | 2 | Nos | 1,942.18 | ₹3,884.36 |
| 4 | Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc, complete - 100mm dia | 4 | Nos | 956.5 | ₹3,826 |
| 5 | Providing and fixing mild steel flange including bolts, nuts, rubber insertion, labour charges etc, complete- 150mm dia | 4 | Nos | 2,018.21 | ₹8,072.84 |
| 6 | Providing, laying and jointing UPVC pipes (0.6 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site, lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment, including cost of solvent cement, excluding UPVC specials such as bends, tees, threaded pieces, couplers, reducer, endcaps etc., complete all as per IS and CPWD specification. - 160mm dia. | 850 | Rum | 1,257.03 | ₹10,68,475.5 |
| 7 | Providing and fixing in position UPVC moulded reducer coupler (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 160 x 110mm dia | 2 | No | 404.52 | ₹809.04 |
| 8 | Providing and fixing in position UPVC moulded tail piece without flange (0.6 Mpa) conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 110mm dia | 4 | Nos | 148.33 | ₹593.32 |
| 9 | Providing and fixing in position UPVC moulded tail piece without flange (0.6 Mpa)conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 160mm dia | 4 | Nos | 327.01 | ₹1,308.04 |
| 10 | Providing and fixing in position UPVC moulded tail piece without flange (0.6 Mpa)conforming to IS 7834 part II and ISI marked, including labour charges for jointing, jointing materials etc, complete - 200mm dia | 4 | Nos | 604.83 | ₹2,419.32 |
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.63 MB
Tendernotice_2.pdf
PDF • 1.72 MB
BOQ_23415.xls
BOQ • 0.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .