REPAIR MAINT OF INTERNAL ELECTRIFICATION AND ALLIED WORKS IN MD ACCN AT MH AREA AND MAP ACCN AT LEBONG UNDER AGE I DARJEELING

Amount

Taking down carefully existing old unserviceable Copper/Aluminium Point Wiring (Light, Fan, Socket or Power) of any description on batten/conduit (Serviceable Fittings such as Switches, Ceiling Roses, Pendants, Fan Regulators, Sockets, excluding Light Fitting, etc. to be kept in safe custody for reuse) and making good disturbed surfaces of Ceiling, Walls, etc. with Cement Morter 1:3 and treating the surfaces so as to match the existing Finishes complete all as specified and as directed.

Taking down old unserviceable/burnt Submain Wiring with copper /aluminum conductor PVC insulated cable of any size drawn through PVC Casing Caping/Conduit including GI Wire Accessories etc. and making good disturbed surfaces of Walls, Ceiling, etc. so as to match the existing Finishes, complete all as specified and as directed.

M&L for Point Wiring with 1.5 Sqmm Copper Conductor single core PVC insulated FRLSH unsheathed 1100 Volt grade multi-stranded Cable drawn through and including PVC Casing & Caping of suitable size and its Accessories such as Elbow, bends, junction boxes, saddles and screws and rawalplug etc on Wall, Ceiling, mounted including PVC insulated FRLSH unsheathed single core multi-stranded Copper Conductor Cable of size 1.5 Sqmm Green in Colour as Earth Continuity Conductor connected to Common Earth and Earth dolly for One Light/ Fan/ Bell Point controlled by One 1-Way Switch/ Bell push of 5 Amp, complete all as specified and as directed.

All as per Item no 03 here-in-above, but for One Light point controlled by two 5 Amp, two way switch, complete all as specified and as directed.

All as per Item no 03 here-in-above, but for One Socket outlet of 3/5 Pin, 5/6 Amp on Same Board, complete all as specified and as directed.

All as per Item no 03 here-in-above, but for One Socket outlet of 3/5 Pin, 5/6 Amp on Independent Board, complete all as specified and as directed.

All as per Item no 03 here-in-above, but for Two Socket outlet of 3/5 Pin, 5/6 Amp on Independent Board, complete all as specified and as directed.

All as per Item no 03 here-in-above, but wiring with 2.5 Sqmm Copper Conductor for One Socket outlet of 3/5 Pin, 15/16 Amp on Independent Board, complete all as specified and as directed.

All as per Item no 03 here-in-above, but wiring with 2.5 Sqmm Copper Conductor for One Socket outlet of 3/5 Pin, 15/16 Amp and Two Socket outlet of 3/5 Pin, 5/6 Amp on Independent Board, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 2-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Piano, Flush type, Single Pole, 1-Way, 15 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Socket Outlet 2-in-1, Flush type, multi-purpose, 2/3 Pin, 5/6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Socket Outlet 2-in-1, Flush type, multi-purpose, 5/6 Pin, 15/16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5 Pin, 5/6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5/6 Pin, 15/16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Ceiling Rose, Surface Bakelite of size 65x50mm, 3 Terminals, AC, 50 Hz, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F Bell push, flush type, 5 Amp, 240 volt complete all as specified and as directed.

S & F Bell Ding-Dong AC 240 V Single Pole complete all as specified and as dircted.

S&F in-repair of Switch Piano, Flush type, Single Pole, 1-Way, 5 Amps, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F in-repair of Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5 Pin, 5/6 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S&F in-repair of Switch Socket Combination 2-in-1, Flush type, multi-purpose, 5/6 Pin, 15/16 Amp, 240 Volt, conforming to IS and connecting up, complete all as specified and as directed.

S & F in-repair of Bell Ding-Dong AC 240 V Single Pole complete all as specified and as dircted.

S & F in-repair of PVC/ Polycarbonate lamp holder with back plate, AC 240V, Single Pole, complete all as specified and as dircted.

M&L Sub-main Wiring with 2-Runs of Single Core 4.0 Sq mm PVC insulated FRLSH multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic Rigid PVC Casing capping ISI marked and its Accessories including 1-Run of Single Core 4.0 Sq mm PVC insulated FRLSH unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Casing capping with all Fittings/Accessories will deem to be included in the quoted UNIT RATE. (b) Cables as mentioned in SCHEDULE ‘A’ Items and 1-Run of PVC Casing capping with all Fittings/Accessories will be measured and paid as ONE UNIT. (c) Sub-main Wiring will be measured PVC Casing capping only. Wire required for looping, etc as ordered will deem to be included in the quoted UNIT RATE.

M&L Sub-main Wiring with 2-Runs of Single Core 6.0 Sq mm PVC insulated FRLSH multi-stranded 1100 Volts grade with Copper Conductor drawn through and including Non-metalic Rigid PVC Casing capping ISI marked and its Accessories including 1-Run of Single Core 6.0 Sq mm PVC insulated FRLSH unsheated multi-stranded 1100 Volts grade with Copper Conductor Cable as Earth Continuty Conductor along with the Wiring and connected from DB to DB/Main Board, complete all as specified and as directed. NOTE :- (a) Cost of PVC Casing capping with all Fittings/Accessories will deem to be included in the quoted UNIT RATE. (b) Cables as mentioned in SCHEDULE ‘A’ Items and 1-Run of PVC Casing capping with all Fittings/Accessories will be measured and paid as ONE UNIT. (c) Sub-main Wiring will be measured PVC Casing capping only. Wire required for looping, etc as ordered will deem to be included in the quoted UNIT RATE.

S&F of Sheet Metal Enclosure MCB DB TPN, 4 way 415 volt, with rated Bus-bar, Double door type MCB DB suitable for mounting incoming and outgoing MCBs triple pole/ single pole complete all as specified and as directed. Make of DB- Legrand/ L&T/ Schneider/ Siemens

S&F of Sheet Metal Enclosure MCB DB SPN, 12 way 240 volt, with rated Bus-bar, Double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and as directed. Make of DB- Legrand/ L&T/ Schneider/ Siemens

S&F in-repair of Sheet Metal Enclosure MCB DB SPN, 8 way 240 volt, with rated Bus-bar, Double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and as directed. Make of DB- Legrand/ L&T/ Schneider/ Seimens

S&F of Sheet Metal Enclosure MCB DB SPN, 4 way 240 volt, with rated Bus-bar, Double door type MCB DB suitable for mounting incoming and outgoing MCBs double pole/ single pole complete all as specified and as directed. Make of DB- Legrand/ L&T/ Schneider/ Siemens

S&F in-repair MCB Single Pole & Neutral (SPN), 'C' Curve,40 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB SPN 40 Amps Legrand/ L&T/ Schneider/ Siemens

S&F in-repair MCB Single Pole (SP), 'C' Curve, 6 to 32 Amps, 240 Volt for fixing on MCB DB’s, 10 kA, 50 Hz, conforming to IS/IEC 60898 and connecting up, complete all as specified and as directed. Make of MCB 6 to 32 Amps Legrand/ L&T/ Schneider/ Siemens

S&F in-repair of MCB Four Pole (FP), 'C' Curve, 63 Amps, 415 Volts, 10 kA, 50 Hz, conforming to IS/IEC 60898 with Sheet metal enclouser suitable for 63 Amps MCB TPN and connecting up, complete all as specified and as directed. Make of MCB TPN and enclouser Legrand/ L&T/ Schneider/ Siemens

S&F in-repair of MCCB Four Pole (FP), 100 Amps, 415 Volts, 16 kA, 50 Hz, conforming to IS/IEC 60898 with with Sheet Metal Enclosure for MCCB FP and connecting up, complete all as specified and as directed. Make of MCCB FP enclosure and MCCB FP- Legrand/ L&T/ Schneider/ Siemens

S&F in-repair surface and wall mounted LED 20/22 Watts tube light fitting batten (4 Feet) (Decorative type) with Polycarbonate housing & integrated electronic driver, 6500K, 240 Volts, complete with all accessories internally pre-wired and necessary mounting arrangements, with and including of new 2 Core multi-stranded Copper Conductor of size 0.5 Sqmm from Ceiling Rose to Fitting, complete all as specified and as directed. Make- CROMPTON GREAVES, Cat Part No.- DMLN1LT8-16/ Cat No.- REGALBATTENT8UPTO1X22WSSBSWH of make HAVELLS/ Cat No.- TMC 501 P 1xT-LED 22W P3241 of make PHILLIPS/ Cat No.- BLRB-DB 118 of make Bajaj.

S&F in-repair surface and wall mounted LED 20/22 Watts tube Rod (4 Feet) with very high efficiency, complete all as specified and as directed. Make- CROMPTON GREAVES, Cat Part No.- LTT8-20/ Cat No.- PHOTONULTRAE2.01213T8SSTL20WLED865SPC of make HAVELLS/ Cat No.- MAS LEDtube 1200mm 18W865 T8 I – 2100lm of make PHILLIPS/ Cat No.- BLRB 20 CW LED.

S&F in-repair surface and wall mounted LED 8/10 Watts tube light fitting batten (2 Feet) (Decorative type) with Polycarbonate housing & integrated electronic driver, 6500K, 240 Volts, complete with all accessories internally pre-wired and necessary mounting arrangements, with and including of new 2 Core multi-stranded Copper Conductor of size 0.5 Sqmm from Ceiling Rose to Fitting, complete all as specified and as directed. Make- CROMPTON GREAVES, Cat Part No.- DMLN1LT8-8/ Cat No.- LUMILINEBS10WLED865SPCWH of make HAVELLS

S&F in-repair surface and wall mounted LED 8/10 Watts tube Rod (2 Feet) with very high efficiency, complete all as specified and as directed. Make- CROMPTON GREAVES, Cat Part No.- LTT8-8/ Cat No.- PHOTONULTRAE2.0603T8SSTL10WLED865SPC of make HAVELLS.

S&F in-repair box type surface and wall mounted LED 20 Watts, (Decorative) Light Fitting (4 Feet) with aluminium housing & integrated electronic driver, 6500K, 240 Volts, complete with all accessories internally pre-wired and necessary mounting arrangements, with and including of new 2 Core multi-stranded Copper Conductor of size 0.5 Sqmm from Ceiling Rose to Fitting including LED Tube 4'x20 Watts, complete all as specified and as directed. Make- CROMPTON GREAVES, Cat Part No.- CCS-100-20-65-HL2-DP-NWH/ Cat No.- BCLAB 20W WH LED P of Make BAJAJ/ Cat No.- LUMILINE+BS20WLED865SPCSS of make HAVELLS/ Cat No.- BN021C LED22S PSU CW GR of make PHILLIPS.

S&F in-repair box type surface and wall mounted LED 10 Watts, (Decorative) Light Fitting (2 Feet) with aluminium housing & integrated electronic driver, 6500K, 240 Volts, complete with all accessories internally pre-wired and necessary mounting arrangements, with and including of new 2 Core multi-stranded Copper Conductor of size 0.5 Sqmm from Ceiling Rose to Fitting including LED Tube 2'x10 Watts, complete all as specified and as directed. Make- CROMPTON GREAVES, Cat Part No.- CCS-103-10-65-SL-DP-NWH/ Cat No.- LUMILINE+BS10WLED865SPCSS of make HAVELLS/ Cat No.- BN 021 LED12S 6500 PSU GR of make PHILLIPS.

S&F in-repair energy saving ultra modern environmental friendly sleek LED Bulk head fitting 10 watt with IP66 protection, complete all as specified and as directed by Engr -in- charge. Make : Crompton Greaves , Cat Pt No-LBHP-10-CDL/ Cat No.- WT202W LED6S NW PSU S2 PC of Philips/ Cat No.- BIBWP 10W LED of Bajaj/ Cat No.- HEXAFT10WLED857SSYMBOPC of Havells

S&F in repair of LED slim square panel light fitting with frame, 15/18 Watt, 1 x 1 feet, including connected with 2 core flexible copper wire 0.50 Sq mm, completed all as specified and directed. Make- Crompton Greaves, Cat part No- LCTLSNE-18-FO-CDL/ Cat No.- PLUTO1X1PLR15WLED840S of Havells.

S&F in repair of LED slim square panel light fitting with frame, 36 Watt, 2 x 2 feet, including connected with 2 core flexible copper wire 0.50 Sq mm, completed all as specified and directed. Make- Crompton Greaves, Cat part No- LCTLSNE-36-FO-CDL/ Cat No.- STRATO2X2PLR36WLED830MOD of Havells/ Cat No.- RC380B LED36S-6500 G5 L60W60 PSU OD SG of Philips/ Cat No.- BZRSQL 36W GZ1 NW of Bajaj

S&F Energy saving new generation environmental friendly long life versatile presure die cast aluminium housing IP 66 building security light fitting luminaire with high power LEDs as light source and electronic driver of capacity 35/36 watts with pre wired and lens embedded PC cover having Bottom opening seperate driver compartment and Impact resistance of IK08 with necessary mounting arrangements, including taking down old unserviceable light fitting, complete all as specified and as directed. CAT No.- LSTS-36-CDL-M of Make- CROMPTON GREAVES/ CAT No.- ENXT P 36L WH CR PC SD of make BAJAJ/ CAT No.- BRP046 LED 36 CW MR S1 PSU GR of make PHILLIPS/ CAT No.- ENDCITYLITEPLAT+SL36WLED757PASYBOPCWOSPD of make HAVELLS

Taking down/out unserviceable UG Cables of any Cross Sectional Area and Connections and joints including Pipes, Bricks, etc of any description laying in trenches or fixing with Walls/Poles, segreating serviceable Bricks/Precast covers, Pipes, Cables etc, and keep in safe custody for reuse, complete all as specified and as directed. NOTE: Earthwork will be measured and paid under appropriate Items.

Excavation in Trenches, not exc. 1.50 Metre wide and not exc 1.50 Metre in depth for any type of foundation/cable trench and getting out in Soft/Loose Soil, complete all as specified and as directed.

Returning, Filling in, including Spreading, Levelling, Watering and Well Ramming in Layers not exc. 25 Cm in Soft/Loose Soil, complete all as specified and as directed.

Removing excavated Materials (Soils) not exc. 50.00 Metre and depositing where directed at a level not exc. 1.50 Metre above the Starting Point in Soil, complete all as specified and as directed.

M&L Sand Cushioning (dry) in trenches/ducts for protection of UG Cables (below, above and around the UG Cable laid in Trenches) of 230mm Spread thickness (8 Cm in depth before laying the Cable and 15 Cm in depth after laying the Cable) and consolidated (punned) upto 180mm thickness, complete all as specified and as directed NOTE : For the purpose of Payment, Punned thickness of Sand Cushioning only will be measured and paid for.

Supply & laying locally available, well burnt Sub-class ‘B’ Bricks/ Fly Ash bricks of size 250x125x75mm (± 8% tolerance), laying perpandicular to UG Cable laid in trenches over Sand Cushion as Cable Protection, complete all as specified and as directed.

Supply & laying of LT XLPE Cable, sheathed PVC insulated, screened, PVC bedded, Galvanised Steel Strip or Wire armoured, Electic Power Cable (heavy duty) with Aluminium Conductor, 1100 Volts grade, cross-sectional area 16 Sqmm 4.0 Core, laid in Pipe/ Ducts/ Trenches/ under Floor/ under Road/ fixed to wall/ pole, including and Testing, complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. MAKE:- KEI/POLYCAB/ HAVELLS/ FINOLEX

Supply & laying of LT XLPE Cable, sheathed PVC insulated, screened, PVC bedded, Galvanised Steel Strip or Wire armoured, Electic Power Cable (heavy duty) with Aluminium Conductor, 1100 Volts grade, cross-sectional area 25 Sqmm 4.0 Core, laid in Pipe/ Ducts/ Trenches/ under Floor/ under Road/ fixed to wall/ pole, including and Testing, complete all as specified and as directed. NOTE : Earthworks, Sand Cushioning, Bricks, GI Pipe, etc. will be measured and paid under appropriate Items. MAKE:- KEI/POLYCAB/ HAVELLS/ FINOLEX

S&F in-repair of Galvanised Iron Pipe 25mm bore (dia) ‘Light grade’ for protection of UG Cable, laid under Floors or Road Crossing, fixing to Pole with and including Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and as directed. MAKE:- JINDAL/BANSAL/ NEZONE/ TATA

S&F in-repair of Galvanised Iron Pipe 40mm bore (dia) ‘Light grade’ for protection of UG Cable, laid under Floors or Road Crossing, fixing to Pole with and including Mild Steel Clamps, Nuts, Bolts, etc., complete all as specified and as directed. MAKE:- JINDAL/BANSAL/ NEZONE/ TATA

M&L for cutting existing road/hard standing not exc 20x35cm in wide & depth getting out excavated material for laying cable/GI tube, returning filling & well rammaing watering finished suraface of depth not less than 10 cm from top using PCC 1:3:6, type C-2 (using 40mm graded aggregate); including removal of surplus soil complete all as specified and as directed.

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6.0 mm thick buried directly in ground earth pit not less than 2.25mtr deep below normal ground level with top edge of the plate not less than 1.5 mtr below ground level connected to galvanized iron or steel earth lead wire 4mm dia size by mean of nut/bolt and washer of galvanized iron or steel as shown in electrical plate no 3 of SSR part I including necessary excavation and earth work GI pipe 20mm dia light grade for watering and GI 15mm dia light grade pipe for protection of GI earth wire etc, PCC chamber with PCC cover in cement concrete 1:2:4 Type B1(20mm graded aggregate), funnel, wire mesh, charcoal dust, salt etc, connected to DB as indicated including testing complete all specified and as directed.

SANJAY KAUSHIK

Damdoo Bhutia