Renovation, interior and exterior design to Jawaharlal Guest House at Sector-21.

Amount

Dismantling and removing the old damaged structures at any height, A.S. flooring, brick works at all level, damaged R.C.C. chajja drops fins, coulmns, projection, beams, slabs, roof ceiling etc. with supply of all labour, T & P, staging, scaffolding, safety of workmen, etc complete cleaning the debrises with all taxes, including leads & lifts, transportation & disposing the same at specified place excluding cost of GST and as per direction of Engineer-in-charge.

Dismantling of floor tiles G/F

Dismantling the old doors and windows with diging out of khao from the sunken floor chipping cleaning the wall and base and disposing the debris at a designated place with supply of all labour,T& P taxes etc excluding cost of GST all complete as per direction of engineer in charge.

Dismantalling brickwork

Dismantalling plaster

Earth work in excavation in all kinds of soil with initial lead & lift for foundation work with dressing, levelling & compacting the foundation bed & breaking the clods to maximum 5cm to 7cm laying in layer not exceeding 0.30m. with cost of labour, T&P, tollage, taxes, excluding cost of GST all complete as per the direction of Engineer-in-charge.

Saline Sand filling including watering & ramming in layer each layer not exceeding 200mm. Including all cost of materials, labour, T&P, transportation charges, royalties, taxes etc. excluding cost of GST all complete as per direction of Engineer-in-charge. (N.B. 10% voids will be deducted from the measured quantity).

P.C.C(1:2:4) of using 20mm. & down C.B.G chips of approved quality in foundation & plinth including mixing hoisting, laying to proper level & slope consolidating, curing, watering charges with supply of all materials, labour, T&P, taxes, etc.excluding cost of GST complete as directed by Engineer-in-charge.

Cement concrete (1:1.5:3) using 12mm to 20mm size H.B.G. chips for all floors, foundation & plinth etc. of approved quality mixing, hoisting, laying, consolidating, curing with cost and supply of all materials, labour, T&P, taxes, tollage, royalties, etc.excluding cost of GST all complete as directed by Engineer-in-charge.

Providing rigid smooth leak proof centering & shuttering made of steel/ply, plank & MS pipes, jacks and other accessories of approved quality for R.C.C. work for following structures and deshuttering, removing the same after due period with supply of all materials, labour, T&P, taxes, royalties, tollage, etc, excluding cost of GST all complete for all floors / height as directed by Engineer-in-charge.

for coloum, beam/ slab

for Design

Brick work in flyash Bricks having crushing strength not less than 75 Kg/Cm² to 99Kg/Cm² including splay/cutting, racking out the joints curing, hoisting, staging at any height with cost and supply of all materials, labour, T&P, taxes, royalties, transportation charges, curing, testing charges etc. excluding cost of GST all complete as per direction of Engineer-in-charge.

Cement plaster in following cement mortar proportion, over brick & R.C.C. work including racking out the joints, finished smooth to the exposed surface, rounding the corners wherever found necessary including cost & supply of all materials, labour, T&P, staging, scaffolding, watering, curing, taxes, testing charges, tollage, royalties, etc.excluding cost of GST complete & as per direction of Engineer-in-charge.

20 mm C.P in CM(1:4)

16mm C.P. In C.M(1:6)

Supply Tor/TMT steel manufactured by SAIL/TISCON/VIGAC Steel of Fe-500 confirming to IS-1786 including cutting, straightening, bending, binding & placing the grills in position for RCC works including binding the grills with binding wire of 18 to 20 gauge including cost of steel, all labour, materials, transportation charges, T&P, taxes, etc. excluding cost of GST all complete as per the direction of Engineer-in-charge. (NB: No Wastage shall be Paid).

supplying , fitting , fixing of ISI mark 100mm dia. pvc Rain water pipe.

clamp

Applying chemical Sikadur 52 UF or its equivalent as bonding agent in between old & new concrete, cleaning the surface properly with necessary instruments with supply of all labour, materials, staging, scaffolding, T&P, taxes, transportation etc excluding cost of GST all complete as per the direction of Engineer in charge for all floors.

Providing and applying A.P.P water proffing membrance black finished reinforced with non-wovwn polyster mat consisting of a coat of bitumen membrance @0.40ltr/sqm by the sme membrance manufacturer of density at 25C, 0.87-0.89 kg/ltr and viscocity 70-160cps over the primer coat of the layer of the membrance shall be laid using butane torch and sealing all joints and preparing the surface complete. the vital physical and chemical parameters of the membrances shall be under joint strength longitudinal and transverse direction as 350/250n. softening point of membrance not less than 150 c cold flexibility shall be up to 2 c when tested in occupance with ASTMD-5147 including of 100 mm lapping after making the surface free from loose particles, oil,grease,fungus or any other contaminant including cost and supply of all labour, T & P, all taxes, transportation, staging, scaffolding etc. excluding cost of GST complete as directed by Engineer In-Charge

Supplying,Fabricate,fitting fixing of MS Grill,made of Flat Square bar in position with screws,clamps,nails including grouting if required with cost and supply of all materials, labour, T&P, taxes, transportation, welding charges, grinding, staging, scaffolding, curing etc. excluding cost of GST complete as directed by the Engineer-in-charge.

Providing and applying termite treatment to soil under floors at the junction of floors and walls, floor surface where construction defects are noticed, at construction joint and at expansion joint in all floor by drilling 12mm holes vertically at 300mm interval to reach the soil below and squirted chemical emulsion into these hole using a hand operated pressure pump and the holes then sealed with white cement. The existing wood work in the building in contact with floor and walls which is infested by termites will be treated by spraying chemical emulsion at the point of contact with adjoining machinery by drilling 6mm hole at the choukaths angle about 45 at the joint of wood work including all cost of insecticide, labour, transportation. taxes, staging, scaffolding etc excluding cost of GST all complete as per the direction of engineer in charge. NB: 1. This is a onetime treatment, if required it should be increased as per the requirement for effective control without any extra cost. 2. The warranty period for the above work is 05 years. 3. The measurement will be taken as per the plinth area.

Painting two coats of 100% pure Weather Coat premium quality Paint to wall surface over a coat of primer of approved quality & shade having resistance to Fungus, moisture, Fading including cost and supply of all materials, labour, T&P, taxes, transportation, staging, scaffolding, etc. excluding cost of GST complete and as directed by the Engineer-in-charge.

Painting two coats with acrylic base plastic emulsion paint of approved quality shade over a coat of wall putty and a coat of primer, preparing the surface sand papering, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. excluding cost of GST complete and as per direction of Engineer-in-charge.

Scraping of Old paint, heavy moss with scrapper, coir brush and sand paper, then washing cleaning the wall surface with soap/soda water using adequate capacity of water tanker, pump set and drying the surface followed by one or more coats of bio wash at any height including running charges of water tanker,pump set,staging,scafolding,water charges etc excluding cost of GST complete job as directed by engineer in charge (East side of Outside Painting).

Painting two coats of Enamel paint of approved quality shade over a coat of primer, applying paint uniformly including cost and supply of all materials, labour, T&P, all taxes, transportation charges, staging, scaffolding, etc. excluding cost of GST complete and as per direction of Engineer-in-charge.

Supplying all materials, labour, T&P for cutting groves in pucca floor & wall for taking pipe line & making good to the damaged portion, excluding cost of GST as per direction of Engineer-in-charge.

Supplying, fitting and fixing of following Chlorinated C-PVC pipes of Astral or equivalent make conforming to IS-15778 & NSF standard & fittings of approved quality for water supply & sanitary works with supply all labour, material, T&P, transportation, taxes, staging, scaffolding etc.excluding cost of GST all complete as per direction of Engineer-in-charge.

20mm dia pvc pipe

25mm dia pvc pipe

32mm dia pvc pipe

50mm dia pvc pipe

20mm dia pvc elbow 90 degree

20 mm dia Tee

20mm dia pass over bend

20mm X 15mm brass elbow 90 degree

20mm X 15mm brass FTP Tee

15mm testing plug

20mm transition bushing

32mm pvc metal s-trap

32mm pvc metal s-trap

50mm pvc tee-soc

50mm pvc utility ball valve

50mm pvc coupling socket

50mm X 32mm reducer bushing

50mm pvc 90 elbow socket

32mm pvc coupling

32mm pvc utility ball valve

32mm pvc union socket

32mm 90 elbow socket

32mm X 25mm reducer bushing

24mm pvc 90 elbow socket

25mmX20mm reducer bushing

25mm pvc union socket

110mm pvc single socket pipe

110 mm pvc dril bend

110 mm pvc plain bend

110mm pvc single door tee

100 mm pvc single tee

110X45 mm pvc bend

110mm pvc cowl

110mm pvc clamp

110mm pvc p.trap

160mm pvc grey pipe of type-B class

50mm pvc grey pipe of type B class

50mm pvc elbow

110mm pvc gully trap

118ml cpvc solvent

teflon tape 90 solvent cent 1 Ltr.04 nos 237ml upvc adhesive

Supplying, fitting and fixing the following sanitary, CP and porcelain fittings of CERA / Jaquar / Duravit or equivalent make with all accessories etc. with supply of all labour materials, T&P, transportation, taxes, staging, scaffolding, etc.excluding cost of GST all complete as per direction of Engineer-in-charge.

EWC concealed size of 660mmx350mmx710mm, coulou-White with Soft close Seat Cover and twin flush Fitting

CP Two-in-one wall mixture 12 mm dia

CP Two way bibcock with Wall flange 12 mm dia

CP health faucet with 8mm dia 1.00 m long flexible tube with PRV

CP overhead shower 200x200mm square shape single flow (ABS body chrome plated with grey face plate) with rubit cleaning system.

CP single lever basin mixture without popup waste with 450mm long braided hose.

CP angular stop cock 15 mm

CP waste coupling 32mm size half thread with 80mm height

CP towel rack 600mm long with lower hangers

CP towel ring square with round flange 600 mm size

CP glass shelf 600mm long

CP soap dish holder chrome wall mounted of Standard Size

600mmx450mmx5mm thick fancy glass mirror with 100% silver back with anti crack film

CP floor grating of size 125mm

CP sink mixture with regular swinging spout width-230 mm with connecting legs and wall flanges

Counter Top Wash Basin 550mm x400 mm (provisonal Rate)

Wash basin of size 530mmx425mm (white) vitrious china

Urinal 340mmx410mmx265mm Vitrious China

Squarting urinal 600mmx350mm Vitrious China

CP toilet paper holder with flap (Cover) 300 mm

32mm PVC waste pipe 600 mm length

CP tumbler holder of standard size

CP glass shelf 600mm long

CP double coat hook rack of standad size

25 to 40mm CP extension nipple

12 to 25mm CP extension nipple

Division plate of toughened glass (frosted) of size 900mmx450mmx8mm with all accessories

CP Soap dispenser with push botton of capacity 0.8 ltrs.

Paper towel dispenser of capacity 400-600 C/Z tonels stainless steel

Stainless steel sink of size 45”x20”x8”

600 mm long hot water connection pipe

CP bottle trap (with internal partition) 32mm size with 300mm & 190mm long wall connection pipe and wall flange

CP hand shower 27mmx27mm square shape single flow (ABS body & face plate chrome plated) with rubit cleaning system)

Conceal stop cock 15 mm dia 108mm long, weighing not less than 108gms.

Finishing wall surface of walls with acrylic wall putty(water based) of approved make and finished smooth and even surface to receive painting including cost of scaffolding staging charges with supply of all labour, materials, T&P all taxes etc. complete as directed by the Engineer-in-charge( Excluding GST).

Providing, fitting & fixing of pvc 3D Designer wallpaper of thickness 3mm of approved design themes, colour which covers min. 50 sqft per roll over the pre painted smooth wall cover the entire piece of a wall paper roller with proper adhesive and press it into the wall and wipe off excess adhesive that oozed from with supply of all materials, labour , T&P, taxes royalties all complete as directed by the Engineer -in- charge ( Excluding GST).

Supply, fitting, fixing of 32mm. thick seasoned teak wood carved panels shutters with 19mm. Thick moulded panels cutting to size, cutting grooves, in frames inserting panels, jointing with adhesive solution, mending good the damages with putty, fixing to position with all brass fittings of standard quality of I.S.I specification, size, etc. all complete including cost and supply of all materials, labour T & P, taxes, all transportation staging scaffolding, etc. complete and as per direction of Engineer-in-charge( Excluding GST).

Providing the existing door Supplying, fitting, fixing of FRP door with frame with supply of all materials, labour, T&P , tollage, conveyance charges and Port entry fees etc.excluding cost of GST all complete as directed by the Engineer-in-charge.

Concrete balustrade/railing in different design of size 12"X6.5" for front to the main gate:(Excluding GST)

Supplying , fitting fixing of Glazed teak wood window shutter finished to proper size fixed to position with all brass fittings of approved quality and of I.S.I specification with cutting grooves to mending the damages etc. all complete including cost of all materials, labour T& P, taxes, all transportation, staging, scaffolding, etc. complete & as per direction of the Engineer-in-charge(E xcluding GST).

Supplying, fitting, fixing of gypsum board false ceiling & cornice, with G.I frame, stay, hooks, nut & bolt including dismantling the existing old damaged ceiling, fixing the new board, fixing nylon tape over the joints & making putty over it & finishing with supply of all materials, labour, T&P, all taxes, staging, scaffolding, etc. complete excluding cost of GST as per direction of Engineer-in-charge.

Supplying, fitting, fixing abrasion resistant full body vitrified tile of size 605mm. x 605mm x 8.0mm of approved quality, shade laying over a base course of CM(1:1) 20mm. thick and cement slurry including cutting to size, filling the joints with tile grouts of adequate shade laid to proper slope & level cleaning the top surface with cost and supply of all materials, labour, T&P, taxes, curing, transportation charges etc.excluding cost of GST all complete as per the direction of Engineer-in-charge.

Supplying, fitting, fixing of 8mm thick Ist quality & approved colour glazed /antiskid ceramic glazed tile of approved quality, size, shade, over wall and floor, fixing over a 20mm base course of C.M(1:4) and cement slurry including cutting to size filling the joints with tile grout , fixed to proper level etc. all wastages, mending good the damages, with cost and supply of all materials, labour, T&P, taxes, tollage, curing transportation charges, etc. excluding cost of GST complete & as per direction of Engineer-in-charge.

Providing and fixing of approved granite of 20mm thick and quality over 25mm. thick cement plaster (1:4) & cement slurry including cutting to size filling the joints with white cement, fixed to proper level etc. all wastages, mending good the damages, with cost & supply of all materials, labour, T&P, taxes, tollage, royalties, curing with all transportation charges, etc. excluding cost of GST all complete & as per direction of Engineer-in-charge.

Providing fitting, fixing of antiskid designer vitified tile of approved Colour and quality, size, thickness over 20mm base course of C.M(1:3) and cement slurry including cutting to size filling the joints with white cement and colour pigment fixed to proper level etc. including all wastages, with cost & supply of all materials, labour, T&P, taxes, tollage, royalties, curing transportation charges, etc.excluding cost of GST all complete & as per direction of Engineer-in-charge.

Supplying, fitting and fixing interior design of individual rooms with required wall paneling for TV unit, using 12mm solid block board pasted with 2mm veneer/mica of approved quality & shade, door paneling and cup board of required size with 19mm solid block board pasted with veneer/mica of approved quality shade and design, supplying of furnitures like single unit / double bed,side table, dressing table,sofaset of approved quality at places as directed by Engineer , with supply all labour, material, T & P , accessories, transportation, scaffolding, taxes, etc. all complete, as per direction of Engineer- in -charge( Excluding GST).

Supplying, fabrication, erection and fixing of decorative High Pressure Laminated cladding as per elevation ALFA/AURA/PROKLAD or equivalent make HPL of 6mm thick with coloured riverts including framing(50x25x1.5mm aluminium tube) fixing screw, PVC plug, PVC sim and labour element for stacking, carrying to heights and fixing in appropriate locations and heights including supply of all materials, accessories, labour, T & P tollage, royalties, transporation, taxes excluding GST, etc. all complete as directed by the Engieer-in-charge.

Providing and supplying Spandrel Glass Panels comprising of 6 mm thick heat strengthened monolithic float glass of approved colour and shade with reflective soft coating on surface # 2 of approved colour and shade so as to match the colour and shade of the IGUs in the vision panels etc. ,all complete for the required performances as specified, as per the Architectural drawings, as per the approved shop drawings, as specified, and as directed by the Engineer- inCharge. For payment, only the actual area of glass on face # 1 of the glass panels (but excluding the area of grooves and weather silicone sealant) provided and fixed in position, shall be measured in sqm. (Payment for fixing of Spandrel Glass Panels in the curtain glazing is included in cost of relevent Item*).“(i) Coloured tinted float glass 6mm thick substrate with reflective soft coating on face # 2, having properties as visible Light transmittance (VLT) of 25 to 35 %, Light reflection internal 10 to 15%, light reflection external 10 to 20 %, shading coefficient (0.25- 0.28) and U value of 3.0 to 3.3 W/m2 K etc. . The properties of performance glass shall be decided by technical sanctioning authority as per the site requirement ( Excluding GST).

Providing and supplying aluminium extruded tubular and other aluminium sections as per the architectural drawings and approved shop drawings , the aluminium quality as per grade 6063 T5 or T6 as per BS 1474,including super durable powder coating of 60-80 microns conforming to AAMA 2604 of required colour and shade as approved by the Engineer-in-Charge. ( The item includes cost of material such as cleats, sleeves, screws etc. necessary for fabrication of extruded aluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purpose of payment ( Excluding GST)

Supplying,fitting & Fixing of following items including cost and supply of all labour, all fittings, T&P, all taxes, transportation from departmental stores to work site , staging, scaffolding, etc. all complete as per direction of Engineer-in-charge. etc. excluding cost of GST all complete & as per direction of Engineer-in-charge.

Godrej Make Mortisc luck(Seven lever)

Godrej Make Hydrolic door closer Heavy Type

Brass Door Stopper 100 mm

Door knob 75mm

100mm stainless steel Hinges

Tower Bolt 100mm length 8 mm dia

Brass Aldrop 300mm length 16mm dia bar

Anchoring bolt to Roof -150mm long, drilling hole in Roof/Beam as required, fixing, with supply of all labour, T&P all complete excluding GST as per the direction of Engineer-In-Charge .

Supply, fitting and fixing of stainless steel letters for signage of Rooms with Laser Cutting,brushing and polishing with approved specifications supply of all labour, materials, T&P, transportation, taxes, etc. excluding cost of GST all complete as per direction of Engineer-in-charge.

Room naming

Main gate signage

French spirit polishing : Two or more coats on new works including a coat of wood filler .( Excluding GST).

Supplyling,fitting, fixing, seasoned teak wood frame chaukath for doors, windows, ventilators, coaltaring two coats to wall side face of frame, fixing to position with required no of W.I clamps of approved size in C.C.(1:3:6) including cutting grooves in chaukaths jointing with adhesive solution fixing to proper position, mending good to damages including cost and supply of all materials, labour, T & P, all taxes, transportation,staging, scaffolding etc. complete as directed by Engineer-in-charge.( Excluding GST)

ELELCTRICAL FITTINGS: Supply of LED down lighter 15 watt recess mounted LED fittings suitable for ceiling cut hole, 165mm dia, powder coated, PDC aluminium housing, diffused PMMA front cover, Electronic constant driver, current 0.07 amp, PF 0.9 round shape. (N.B: The detailed scope of work for electrical items are given separately in the tender document).

Supply of LED down lighter 06 watt recess mounted LED fittings suitable for ceiling cut hole, 80mm dia, powder coated, PDC aluminium housing, diffused PMMA front cover, Electronic constant driver PF 0.9 round shape

Supply of 07 watt LED mirror wall light, fittings, cool white, straight shape, flexible neck for adjustment, bronze finish.

Supply of indoor decorative 04 watt LED designer wall light fitting, crassy white glass and brass finish base

Supply of 3C X 2.5 sqmm copper flexible cable for power points and roof lights as per scope of work.

Supply of 16 watt LED prime crystal chandelier (jhummer light) as per scope of work.

Replacement of 18 way modular plate, frame with all 10 amp switches, wall sockets etc. as per scope of work

Replacement of 12 way modular plate, frame with all 10 amp switches, wall socket etc. as per scope of work.

Replacement of 8 way modular plate, frame with all 10 amp switches, wall socket etc. as per scope of work.

Replacement of 6 way modular plate, frame with all 10 amp switches, wall socket etc. as per scope of work.

Replacement of 3 way modular plate, frame with all 10 amp switches, wall socket etc. as per scope of work.

Replacement of 4 way modular plate, frame with all 20 amp switches, wall socket etc. as per scope of work.

Wiring to light point using modular switch as per scope of work.

Wiring to ceiling/exhaust fan point using modular switch and regulater as per scope of work

Wiring to 10 ampere socket point using modular switch and socket as per scope of work

Supply of 4C X 10 Sqmm aluminium armoured cable as per scope of work.

Supply of HDPE pipw having OD-50mm material grade PE-63, wall thickness 2.4mm to 2.9mm, confirming to IS-4984-1995 certified with latest amendement for cable laying

Fixing of 7 watt mirror light/4 watt indoor/jhumer decorative wall light.

Fixing of 6 watt/ 15watt LED recess mounted pannel light

Concealed by removing all the surface wiring in the wall as per scope of work.

lying of 4C X 10 sqmm aluminium armoured XLPE cable by making kuchha cable trench through suitable HDPE pipe.

Solar Designs Private Limited

INNER SPACE

RIGHT ADDRESS

E-VERVE DESIGN