Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹27.8 LAccepted-AOC F 402 AMBIKA APARTMENT PLOT A 9 SECTOR 20 NERUL W NAVI MUMBAI 400 706 | THANE | MAHARASHTRA | 400706 | L1 | Accepted-AOC Being Lowest Tenderer | |
| 2 | L2₹28.4 L+₹33,860 (1.21%)Rejected-Finance | L2 | Rejected-Finance Being other than lowest tenderer | |
| 3 | L3₹29.3 L+₹1.2 L (4.28%)Rejected-Finance 385 GROUND FLOOR GANESH MURTI NAGAR CAPTAIN PRAKASH PETHE MARG BACKBAY BUS DEPOT CUFFE PARADE COLABA MUMBAI 400 005 | MUMBAI | MAHARASHTRA | 400005 | L3 | Rejected-Finance Being other than lowest tenderer | |
| 4 | L4₹31.5 L+₹3.4 L (12.0%)Rejected-Finance | L4 | Rejected-Finance Being other than lowest tenderer | |
| 5 | L5₹32.0 L+₹3.9 L (13.9%)Rejected-Finance | L5 | Rejected-Finance Being other than lowest tenderer |
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
27 Jul 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (NW) KUNJALI
GARRISON ENGINEER NW KUNJALI DR HOMI BHABHA ROAD NAVY NAGAR COLABA MUMBAI 400005
8445 REPAIR MAINTENANCE OF MOTORISED MANUAL ROLLING SHUTTER SLIDING DOOR IN BLDGS AT NAVAL DOCKYARD AND OTHER UNITS UNDER AGE BR II UNDER GE NW KUNJALI
2022_MES_532941_1
8445/E8
Open Tender
Civil Works
Item Rate
183 days
GE (NW) KUNJALI
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
Yes
GE (NW) KUNJALI
₹90,000
Yes
31 Oct 2022
22 Jun 2022
29 Jul 2022
29 Jun 2022
27 Jul 2022
7 Jul 2022
22 Jun 2022 - 29 Jun 2022
Amount
Taking down existing mild steel rolling shutters for and including replacing the slates, bottom lock plates, helical springs, side guides, sponge rubber gaskets, hood cover and side bracket etc wherever required and refixing in its original position after repairs including material and labour for greasing and mechanical old and new parts of rolling shutters complete all as per directed for shutters of area n. exc 10 sqm each, complete all as specified and directed.
-Ditto- as per Item No.1 above but area of shutters exc 10 sqm and n.exc 20 sqm each
-Ditto- all as per srl item No.1 but area of shutter exc 20sqm each Note for Srl Item No. 1 to 3 (i) Supply only parts for srl item No. 1, 2 & 3 shall be measured and paid separately
S&F factory fabricated mild steel (hardened) helical wire spring of size 300mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 400mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 450mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated mild steel (hardened) helical wire spring of size 600mm long, 80mm dia to match with existing complete all as specified and directed.
S&F factory fabricated new guide of rolling shutter made out of 1.25mm thick mild steel sheet of grade Fe-310 or Fe-410 of required length to match the existing one and including one shop coat of red oxide primer complete all as specified and directed.
S&F factory fabricated side brackets made out of 1.25mm thick mild steel of grade Fe-410 or Fe-310-0 to match with existing including one shop coat of red oxide primer complete all as specified and as directed
S&F factory fabricated new mild steel slates of 1mm thick of grade Fe-410-0 or Fe-310-0 to match with existing fitted with locking clips, riveted to slates including one shop of red oxide primer complete all as specified and as directed
S&F factory fabricated mild steel of grade Fe-410-0 or Fe-310-0 2.5mm thick bottom lock plate riveted and made of mild steel sheet of 1mm and welded with and including provision of standard locking arrangement welded to and including mild steel angle iron complete to match with existing with and including one shop coat of red oxide primer complete all as specified and as directed
S&F factory fabricated hood cover of mild steel 1mm thick hexagonal, square or circular shape fitted to existing angle iron stiffness at bottom edge and to bracket plate all as directed and applying one shop coat of red oxide primer complete all as specified amd directed.
S&F in repair mild steel factory made bevel gear box with machine cut gears suitable for rolling shutters as fixed in repairs complete all as specified and as directed.
S&F in repair mild steel pressed beval handles 150mm long, oval type, enamelled black all as specified and as directed.
S&F mild steel safety lever lock with 4 levers for rolling shutters all as specified and as directed.
S&F for greasing and easing in position of mild steel rolling shutters of area n.exc 10sqm each for full movement and for easy operation for shutters complete all as secified and as directed. Note :- For purpose of measurement and payment EACH TIME greasing and easing in position shall be considered.
S&F for greasing and easing in position of mild steel rolling shutters of area exc 10sqm and n.exc 20sqm each for full movement and for easy operation for shutters complete all as specified and as directed. Note :- For purpose of measurement and payment EACH TIME ofgreasing and easing in position shall be considered.
M&L for greasing and easing in position of mild steel rolling shutters of area exc 20sqm each for full movement and for easy operation for shutters complete all as secified and as directed. Note :- For purpose of measurement and payment EACH TIME of greasing and easing in position shall be considered.
M&L for preparing new or previously untreated surface of any decription over 10cm in width or girth and applying 2 coats of aluminium paint over one coat of red oxide primer complete all as specified and directed.
M&L for preparing old painted surface of any decription over 10cm in width or girth and applying one coats of aluminium paint complete all as specified and directed
S&F plain aluminium sheeting, alloy 31000H4, 1.25mm thick as in covering to door shutters et, cut to size, edge beads punched including rivets with plain 40mm ap joints including bending turning up, mitered angles, stopped ends, outlets etc, as required as in repairs complete all as specified and as directed
Dismantling structural steel works in doors, gates etc but excluding framed truss etc all as specified and directed
S&F rolling shutter with ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, gear box,etc gear operated type with chain wheel and hand chain and one shop coat of primer erected in position as directed.
S&F rolling shutter without ball bearing, thickness of laths 1.25mm as specified including top cover, anchoring rod, hasp and staple, push pull or manual type and one shop coat of primer erected in position as directed.
S&F for 14 HP single phase for Motorised shutter incl all accessories. All as specified and directed.
Extra for wicket door including 4 lever mild steel safety lock lockable from both inside and outside (area of wicket door to be measured)
S&F framed work in doors or gates of angle or other section with gusset plates, rails, braces, etc, of grade Fe 410-W ( Gde E-250 ) quality A complete drill for fixing of steel sheeting or other covering . Doors, etc to be prepared by hanging and sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering , running, rails & guide) and hanging also fastening and fixing complete all as specified and directed.
M&L for preparing new or previously untreated surface of any description, over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.
S&F collapsible steel gates, top hungs consisting of channel pickets, provided flat bars, top and bottom runners, brass handles etc, as specified, erected in position and securing runners with holdfast and brackets complete all as specified and as directed.
M&L for Old surfaces of any description & applying two coats of acrylic (antifungal) exterior grade paint of over one coat of primer on wall/roof at any height including scafolding complete all as specified and directed
M & L for preparing new plastered surfaces of walls and applying two coats of oil bound distemper over a coat of alkali resistant primer on plastered surfaces at any height of G+4 including scafolding complete all as specified and directed.
Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing ) and rabbish of the premises.
Dismantling stone slab and tiles of of any description or thickness laid bedded and pointed in any mortar in floors, aprons complete all as specified and as directed
M&L for 20 mm thick granite maching cut as in steps, window cills, cooking platform, working table etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).
M&L for 20 mm thick granite maching cut as in skirting/vertical surfaces i.e jambs /risers and pillars etc and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed. (colour of granite will be decided by the GE/Engr-in-Charge).
M &L for machine cut kota stone slab flooring 18 to 20 mm thick laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M &L for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing and 15 mm thick backing coat in cement mortar 1:4 complete all as specified and directed.
M&L for 150mm wide strip of makrana white marble 20mm thick machine cut, bedded jointed and pointed with grey cement slurry including cutting , polishing and 20 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.
M&L for 20 mm thick green marble machine cut, bedded jointed and pointed with grey cement slurry with pigment to match the shade including cutting , polishing and 20 mm thick screed bed/backing coat in cement mortar 1:4 complete all as specified and directed.
Rounding to edges of stone slabs on edge, such as in steps, cooking platform and other similar situations.
M&L for 25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in floor finished even and fair all as specified.
M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .
M&L for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified .
M&L for machine pressed cheqered cement coloured tiles of size 250mmx 250mmx 20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointedin neat cement slurry in floors complete all as specified and direcetd.
Dismantling plain or corrugated steel sheeting, any gauge or thickness incl Nainital or similar pattern roof coverings all as specified and directed.
S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws as specified.
S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws all as specified and directed.
Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each
Taking down chowkats or frames but n exc 1.5 sqm each but with shutters (without taking off shutters from the frame)
Taking down chowkats or frames exc 1.5 sqm but n exc 4 sqm each but with shutters (without taking off shutters from the frame).
S&F Rajshri brand factory made PVC door frame (Choukhat) of the size 50 mm width, 47 mm height with a wall thickness of 5 mm made out of extruded 5 mm thick PVC sheet of density 600 Kg/Cbm manufactured by an ISO-9001-2015 certified comany, having pattam width of 50 mm and thickness of 10 mm. All three frame lengths reinforced with 19 mm x 19 mm MS square tube of 19 gauge, mitre cut at two corners and joined with 2 Nos of 150 mm long brackets of 15 mm x 15 mm MS square tube or joint by fusion heat welding. The door frame shall be fixed to the wall using 8/100 mm long MS screws through the frame by using PVC fasteners. A minimum of 4 NOs of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc complete as per manufacturers specification and direction of Engineer-in-Charge.
S&F 30 mm thick Rajshri brand factory made moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom & lock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/eynoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cbm manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /eynoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete as per direction of Engineer-in-Charge, manufacturer's specification and drawing.
S&F powder coated aluminium (minimum 25 micron thickness of coating) of various section as required for doors, window & partion/Ventilator etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like rubber beading, clips locking arrangement, handle, tower bolt for shutter, sealant complete all as specified and as directed
S&F in repair 18/19 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work/metal Frame Work.
Ditto as ser No above but 9mm thick. All as specified and directed.
S&F in repairs vitreous china wash down water closet pan coloured (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed. (Make -Jaquar)
S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).
S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and padestal complete as fixed in repair.
S&F under counter wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed Make - Jaquar CAT PART NO- CNS-WHT-705.
S&F counter top wash hand basin incl chromium plated brass waste coupling and PVC waste pipe complete all as directed Make _ Jaquar CAT PART NO- ALS-WHT-85601
S&F 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified. (Make -Jaquar)
Supply only flush pipe of PVC 32 mm dia for low level cistern.
S&F vitreous china urinal, half stall type white (excluding flushing cistern, flush pipe ) but including PVC waste pipe , providing and fixing plugs bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement and fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (exclusive of fixing supply pipe to flushing cistern trap and waste pipe) fixed in repair complete all as specified (Make - Jaquar)
S&F 32 mm dia WHB/urinal flexible waste pipe all as specified and directed.
S&F in repairs CP towel ring square with round flange (Make - Jaquar CAT PART NO -CAN-1121N) all as specified and directed.
S&F in repairs CP towel rail 600 mm long with round flange (Make - Jaquar CAT PART NO -CAN-1111NM) all as specified and directed.
S&F in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook (Make - Jaquar).
S&F in repairs CP Pillar cock taps 15 mm bore with lift type operating knob and base flange Make - Jaquar CAT PART NO- FLR-5015 all as specified and directed.
S&F in repairs CP bib cock 15 mm bore (Make Jaquar CAT PART NO- FLR-5047N) all as specified and directed.
S&F in repairs CP angular stop cock with wall flange of 15 mm bore (Make - Jaquar CAT PART NO- FLR-5053N) all as specified and directed.
S&F overhead shower of 100 mm round shape single flow (ABS Body chromium plated with gray face plate) with rubit cleaning system ( Make- Jaquar CAT PART NO- OHS-1989) all as specified and directed.
S&F PVC connections 15 mm size with PTMT nuts of length 450mm
mahekconstructioncompany
MADHU ENTERPRIZES
jalandhara construction
georson constructions
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .