Providing Deep Bore Well with Mini power pump at Ward No 02 Kottai Colony 4th Cross Street in Vandavasi Municipality

Conducting for Geophysical survey

Drilling of borewell anywhere in tamilnadu including transportaion from one place to another place within tamilnadu in alluvial soil or sedimaentary strata of clay and sand ,stone,pebbles,boulders etc.,by first taking a pilot bore of 140mm/150mm dia upto 60m depth ending below ground level.Then enlarging to required dia by direct or reverse rotary mud and circulation method using contractor's rig ,fuel, labour , drilling betonite mud and water required for drilling at the site shown by TWAD officer's

supply and Fixing 150mm Borewell PVC casing pipe complete as per standard specification.

supply and Fixing 150mm Borewell PVC EndCap complete as per standard specification.

Supply & Fixing of 50mm MS clampset etc.,

Supply & Fixing of Wooden metre board etc.,

supply and fixing of 4.00 Sq.mm pvc sheathed 3 core copper Flat type cable with ISI specification.

supply and fixing of 50 mm dia H.D.P.E.Hose pipePN 10 kg/cm2 with ISI specification.

supply and Delievery of 2 H.P.vertical submerible motor pump set Suitable For 20 LPM x 70 m Head and single Phase, 240 V etc., compete as per standard specification

Supply & Fixing of pvc pipes & Specials etc -50mm dia G.I Bend

50mm dia G.I Pipe

20mm dia G.I Pipe

2.5sqmm 3 core Cable

Brass Chromium Plated Screw Down Tap 20mmdia

Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification

Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel,stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil, wet sand,or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blasting inclusive of shoring shuttering and baling out water and cleaning and levelling the site etc.,complete 10 cum

Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification

Brick work in CM 1:5 (one cement & five sand) using III class ground moulded bricks of size 8 3/4"X4 1/4" X 2 3/4" including finishing, curing, etc., complete complying with standard specification - 100CFT

Plastering with cement mortar (1:5) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications

Supplying and filling in foundation and basement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification.

White washing two coats with freshly burnt shell lime white in colour in all floors including cost of lime and other materials brushes scaffolding charges etc.complete complying with standard specification and as directed. -100sq.m

Painting 2 coats with approved cement paint over cement plastered wall surface, ceiling and other new surface and including cleaning, reparing the surface and curing etc., complete.

Supplying and Fixing of 1000 lit Capacity PVC Tank With I.S.I.Specification.

Supply and delivery of 1.5 H P panel board and accessories including all fittings suitable for Three phase pumpset as per schdule for the following

Labour charges for fixing 1.5 Hp submersible motor pump set etc., complete.

Supply and delivery of MS Kiosk of size 0.75m x0.45m x 0.75m made up of MS angle of size 50mm x 50mmx 4mm alround covered with 16 gauge MS sheet and kiosk door made up of MS plates of size 25 mm x 3 mm including cutting, welding, grinding, locking arrangements and labour charges etc.,

Add GST at 18%